Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹6.7 L+₹41,918.90 (6.67%)Rejected-Finance 0 BEECHPARA DANGAURA MAHENDRAGARH MANENDRAGARH CHIRMIRI BHARATPUR CHHATTISGARH 497442 | KOREA | CHHATTISGARH | 497442 | L2 | Rejected-Finance Not being lowest bidder | |
| 3 | L3₹7.1 L+₹82,808.30 (13.2%)Rejected-Finance | L3 | Rejected-Finance Not being lowest bidder | |
| 4 | L4₹7.3 L+₹1.1 L (16.8%)Rejected-Finance | L4 | Rejected-Finance Not being lowest bidder | |
| 5 | L5₹7.9 L+₹1.6 L (25.0%)Rejected-Finance | L5 | Rejected-Finance Not being lowest bidder |
| Sl No | Description | Qty | Unit | AGRAWAL ASSOCIATES L11 | Mahindra Electric Stores L9 | SKS Electricals L8 | M/s Harshal Traders L6 | SHREE VAIBHAV ELECTRICALS L5 | Aziz Traders L1 | N D ELECTRICAL L3 | MAHALAXMI ENTERPRISES L2 | AMAN ENGINEERING AND ELECTIRICALS WORKS L7 | M/s Pratik Enterprise L4 | PAUL REFRIGERATION L10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply & Installation of Galvanized steel high mast lighting system of 16 meter height (Moterised) in two section, 3 mm section thickness, top dia not less than 150 mm, bottom dia not less than 340 mm, with 2/3 wire rope Moterised system and its motorised accessories, Aviation lights , Lightining Arrester and its accessories, System is suitable for loading 08 Nos, LED flood lights of capacity 400 Watt and Anchor plate not less than 445 PCD 8 holes, Template 460 PCD 8 Hole, Foundation Bolt M30x850mm Straight -08 Nos, complete all as specified and directed.
Note :- (i) The rates are inclusive of High mast control panel (timer panel with suitable size/type/rating of MCB's , contactors, analog type timers, relays etc) for operation of High mast lights, Aviation light & Winch motor assy and complete control wiring from Timer panel to highmast lights and winch motor as per the OEM recommendations.
(ii) The rates are inclusive of excavation work and foundation work of High mast pole as recommended by the OEM of the High Mast light and Engr-in-charge.
(iii) The rates are inclusive of any type of T&P/Crane/Hydra involved in fixing of the highmast Lights.
(iv) The cost of luminaries is to be paid under relevent item of the sch.
Make: - Bajaj/Wipro/Surya/Crompton. | 1 | Each Job | 5,00,000 ₹5,00,000 | 4,23,817 ₹4,23,817 | 4,12,200 ₹4,12,200 | 3,50,000 ₹3,50,000 | 3,75,000 ₹3,75,000 | 3,10,000 ₹3,10,000 | 3,70,000 ₹3,70,000 | 3,30,000 ₹3,30,000 | 40,000 ₹40,000 Lowest | 3,15,000 ₹3,15,000 | 6,70,000 ₹6,70,000 |
| 2.00 | Supply and fix LED Flood light 400 watts made up of pressure die cast aluminium housing high power LED's potted driver, lens, with efficacy of 120lm/W & toughened glass with IP 66 protection complete all as specified and directed.
Make: Halonix/Philips/Havells
Note :- The rates are inclusive of fixing charges of Flood lights to the circular ring of the High mast pole. | 8 | Each | 20,000 ₹1,60,000 | 22,500 ₹1,80,000 | 24,000 ₹1,92,000 | 17,370 ₹1,38,960 | 14,500 ₹1,16,000 | 18,500 ₹1,48,000 | 12,000 ₹96,000 Lowest | 18,000 ₹1,44,000 | 30,000 ₹2,40,000 | 15,000 ₹1,20,000 | 25,000 ₹2,00,000 |
| 3.00 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed. | 20 | Rm | 475 ₹9,500 | 400 ₹8,000 | 370 ₹7,400 | 450 ₹9,000 | 400 ₹8,000 | 255 ₹5,100 | 342 ₹6,840 | 320 ₹6,400 | 400 ₹8,000 | 290 ₹5,800 | 100 ₹2,000 Lowest |
| 4.00 | All as per irtem no 3 above but of size 25 Sqmm 3.5 Core complete all as specified and directed. | 210 | RM | 400 ₹84,000 | 324 ₹68,040 | 287 ₹60,270 | 330 ₹69,300 | 300 ₹63,000 | 198 ₹41,580 | 285 ₹59,850 | 280 ₹58,800 | 300 ₹63,000 | 270 ₹56,700 | 100 ₹21,000 Lowest |
| 5.00 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level , connected to 32 mm x 6 mm GI strip as earthing lead by means blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame , 50 MM dia GI pipe light grade for protection of wire/strip etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point complete all as specified and directed.
(@4 Earthings to each high mast pole, LA and Timer panel =4X1=4 Nos)) and 02 nos for Feeder panel (Total -6 earthings) | 6 | Each job | 7,000 ₹42,000 | 6,000 ₹36,000 | 7,000 ₹42,000 | 6,000 ₹36,000 | 8,000 ₹48,000 | 5,000 ₹30,000 | 5,000 ₹30,000 | 4,600 ₹27,600 | 15,000 ₹90,000 | 7,500 ₹45,000 | 3,500 ₹21,000 Lowest |
| 6.00 | Supply, install testing and commissioning outdoor type LT panel board manufactured by CPRI approved manufacturer floor mounted, self supporting compartmentalised design of suitable size but not less then 0.8 Mtr X 0.8 Mtr X 0.300 Mtr, 440 V, 3 phase 4 wire system powder coating provided with suitable to make it dust/vermin proof. The panel shall be made with 3.15 mm thick CRCA sheet for outer shell and inner shell made out of 1.9 mm thick CRCA sheet,double door with front openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell be compartmentalized, front openable single door system lockable. Inner shell completely vermin proof and to accommodate incoming/outgoing MCCBs, MCBs, motor starters and TPN aluminium bus and extension links. Aluminium bus bar of capacity 400 Amps- 3 Nos and 1 Nos for neutral of capacity 200 Amps, including neutral duly insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size/rating of epoxy resin insulator all housed in suitable bus bar chamber. All control panel wiring shall be with 2.5 sqmm multi stranded copper conductors for power wiring between bus bar to each incoming and out going MCCB with adequate size of single core multistranded copper conductor cable of adequate size and shall be properly bunched, tied, ferrulled for proper indentification and crimped with adequate size of lugs and provision and fixing of Voltmeter,Ammeter with built in selector switch, CTs of suitable ratio, and pilot indication lamps complete along with provision of necessary cable entry/exit boxes for all incoming and out going cables with suitable size of cable glands etc. Computer cut shelf adhesive vinyl danger notice plate having conventional symbol of bone & skull be provided. The panel shall consists of following accessories complete all as specified and directed:-
Note : (i) Electrical connection from switchgear to bus bar would be through copper strips of suitable size.
(ii) The internal electrical connection for measuring instruments would be through multi-stranded PVC insulated copper conductor cables of suitable size.
(iii) The termination of incoming and outgoing cable into and from switchgear would be through properly crimped aluminum lugs of suitable rating incommensurate with that of switchgear.
(iv) Cable glands would be provided for incoming & out going cables in panels.
(v) The cost of fixing of the panel on suitable PCC (1:3:6) type C-1(using 20 mm graded black trap/basalt/granite stone aggregates) foundation as directed by Engineer-in-Charge is deemed to be included in the quoted rates by the contractor for the above item.
(vi) The bottom of panel shall have minimum 60cm height from existing ground / floor level. | 1 | Nos | 1,00,000 ₹1,00,000 | 95,000 ₹95,000 | 75,000 ₹75,000 | 80,000 ₹80,000 | 35,000 ₹35,000 Lowest | 38,500 ₹38,500 | 40,000 ₹40,000 | 42,000 ₹42,000 | 2,50,000 ₹2,50,000 | 72,000 ₹72,000 | 48,000 ₹48,000 |
| 7.00i) Incomer a) MCCB four pole 25 KA rapturing capacity 100Amps Ics= 100% of Icu adjustable thermal magnetic setting including connection with bus bar - 01 Nos (as incomer) ii) Out going a) MCCB four pole 25 KA rapturing capacity 100Amps Ics= 100% of Icu adjustable thermal magnetic setting - 02 Nos (for High mast light control panel - 01nos) & 01 Nos spare b) MCB SPN, "C' curve, 10KA, 32Amps, - 01 Nos (for existing street light panel) c) Voltmeter 0 to 500 volts of size (square dialed) 96 X 96 sq mm flush mounted, AC 50 Hz three phase energy accuracy class 1.0 including inbuild selector switch - 01 Nos d) Ammeter 0 to 100 amps of size 96 X 96 sq mm flush mounted, AC 50 Hz three phase energy accuracy class 1.0 including inbuild selector switch and suitable ratio of CT's complete - 01 Nos e) LED type RYB phase indicator lamp with back up HRC fuse - 01 Set | ||||||||||||||
| 8.00 | Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed. | 47.2 | Cum | 500 ₹23,600 | 100 ₹4,720 | 210 ₹9,912 | 120 ₹5,664 | 225 ₹10,620 | 100 ₹4,720 | 200 ₹9,440 | 340 ₹16,048 | 800 ₹37,760 | 320 ₹15,104 | 90 ₹4,248 Lowest |
| 9.00 | Ditto item no 6 above but in hard/dense soil complete all as specified and directed. | 11.8 | Cum | 1,000 ₹11,800 | 200 ₹2,360 | 260 ₹3,068 | 200 ₹2,360 | 600 ₹7,080 | 280 ₹3,304 | 300 ₹3,540 | 450 ₹5,310 | 800 ₹9,440 | 360 ₹4,248 | 150 ₹1,770 Lowest |
| 10.00 | Removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed | 19.88 | Cum | 100 ₹1,988 | 10 ₹198.8 Lowest | 90 ₹1,789.2 | 60 ₹1,192.8 | 115 ₹2,286.2 | 20 ₹397.6 | 100 ₹1,988 | 100 ₹1,988 | 800 ₹15,904 | 120 ₹2,385.6 | 40 ₹795.2 |
Tender Value
Refer Docs
EMD Value
₹22,660
Closing Date
20 Jun 2026, 6:00 pmClosed
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
PROVISIONING OF 01 X HIGH MAST SECURITY LIGHT 16 MTR AT NHM LAB CQA FEE AND NBCE WING, AUNDH CAMP PUNE UNDER GE MH AND RH KHADKI
2026_MES_768688_1
8865/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹22,660
12 Aug 2026
30 May 2026
22 Jun 2026
30 May 2026
20 Jun 2026
13 Jun 2026
30 May 2026 - 20 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & Installation of Galvanized steel high mast lighting system of 16 meter height (Moterised) in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope Moterised system and its motorised accessories, Aviation lights , Lightining Arrester and its accessories, System is suitable for loading 08 Nos, LED flood lights of capacity 400 Watt and Anchor plate 460 PCD 8 Holes, Template 460 PCD 8 Hole, Foundation Bolt M30x850mm Straight -08 Nos, complete all as specified and directed.
Note :- (i) The rates are inclusive of High mast control panel (timer panel with suitable size/type/rating of MCB's , contactors, analog type timers, relays etc) for operation of High mast lights, Aviation light & Winch motor assy and complete control wiring from Timer panel to highmast lights and winch motor as per the OEM recommendations.
(ii) The rates are inclusive of excavation work and foundation work of High mast pole as recommended by the OEM of the High Mast light and Engr-in-charge.
(iii) The rates are inclusive of any type of T&P/Crane/Hydra involved in fixing of the highmast Lights.
(iv) The cost of luminaries is to be paid under relevent item of the sch. | 1 | Each | - | - |
| 2 | Supply and fix LED Flood light 400 watts made up of pressure die cast aluminium housing high power LED's potted driver, lens, with efficacy of 120lm/W & toughened glass with IP 66 protection complete all as specified and directed.
Make: Halonix/Philips/Havells
Note :- The rates are inclusive of fixing charges of Flood lights to the circular ring of the High mast pole. | 8 | Each | - | - |
| 3 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed. | 20 | Rm | - | - |
| 4 | All as per irtem no 3 above but of size 25 Sqmm 3.5 Core complete all as specified and directed. | 210 | RM | - | - |
| 5 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level , connected to 32 mm x 6 mm GI strip as earthing lead by means blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame , 50 MM dia GI pipe light grade for protection of wire/strip etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point complete all as specified and directed.
(@4 Earthings to each high mast pole, LA and Timer panel =4X1=4 Nos)) and 02 nos for Feeder panel (Total -6 earthings) | 6 | Each job | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.56 MB
TENDER8865.pdf
Tender Documents • 0.88 MB
BOQ_860827.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .