Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC YANAM | YANAM | YANAM | PUDUCHERRY | 533464 | L1 | Accepted-AOC Work Order Issued | |
| 2 | L2₹13.2 L+₹61,060 (4.83%)Rejected-Finance | L2 | Rejected-Finance Rejected |
Tender Value
₹12.6 L
EMD Value
₹25,252
Closing Date
22 Aug 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PWD, Yanam
Chinta Street, PWD, Yanam
Improve
2023_PWDC2_13415_1
73/EEY/2023-24
Open Tender
Civil Works
Item Rate
90 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹25,252
13 Sept 2023
11 Aug 2023
22 Aug 2023
11 Aug 2023
22 Aug 2023
11 Aug 2023
Amount
15.2.1 Demolishing Cement Concrete manually/by mechanical means including disposal of material within 50 metres lead –Nominal Concrete 1:3:6 or richer mix (i/c equivalent design mix).
15.2.2 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil.
2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
5.1.2 Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
5.2.2 Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses, plinth and sting courses , fillets, columns , pillars , piers, abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level -Thermo –Mechanically treated bars (TISCON / VIZAG /IISCO / SAIL / JSW) Fe - 415 or more.
5.22A.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete above plinth level–Thermo-Mechanically Treated bars (TISCON/ VIZAG/IISCO/SAIL /JSW) Fe - 415 or more.
5.9.1 Centering and shuttering including strutting, propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete.
5.9.6 Centering and shuttering including strutting, propping etc and removal of form for - Columns, Pillars , Piers , Abutments , Posts and Struts.
6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand).
13.1.2 12mm cement plaster of mix -1:6 ( 1 cement : 6 fine sand).
10.25.2 Steel work welded in built up sections / framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
5.12 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates,anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
10.2 Structural steel work riveted , bolted or welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
12.80 Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc.
14.46 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.
14.57.1 Painting with black anti - corrosive bitumastic paint of approved brand and manufacture to give an even shade - one or more coats on old work.
13.47.1 Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade - New work (two or more coats applied @1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10sqm).
13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.
9.119 Providing and fixing factory made P.V.C. door frame of size 50x 47 mm with a wall thickness of 5mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 nos , of 150mm long brackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x19 mm M.S.square tube of 19 gauge , EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S.screws of 65 / 100 mm size, complete as per manufacturter's specification.
9.120.1 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5 mm x 2) thick , 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail , panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7 mm (5 mm + 2 mm) thick x 15 mm wide PVC sheet beading on inner side , and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the ]interior side of the 'C" Channel using PVC solvent adhesive etc. complete manufacturer's specification & drawing - 30mm thick plain PVC door shutters.
31.277.1B Supplying and fixing of 25 X 25 mm size vaccum pump (KIRLOSKAR/ AXWELL/DEKKAR) make 3 phase monoblock motor and pumpset complete.- 2.2 KW/ 3 HP.
31.48.4F Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 250 mm dia.
31.300. 1A Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves) (Make VAG, AVK,Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fully rubber lined EPDM of good quality W720 , replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimensions as per BSS 163-89/ISI 4846 - 2000/DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 150mm.
31.300. 1B Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves) (MakeVAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fullyrubber lined EPDM of good quality W720 ,replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimen-sions as per BSS 163-89/ISI 4846 - 2000/DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 200mm.
31.48.4B Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately)- 100 mm dia.
31.256. 1B Supplying and fixing of fully automatic air break star-delta starter range for 10A to 23A F.A.S.D. (Bharat Culter Hammer /L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 15HP to 17.5 HP pumpsets.
31.256. 1C Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer /L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5).
Basic Code.No.E 381 Supplying and fixing 100A porcelain fuse as directed by the Engineer-in-charge
Basic Code.No.1610 Supplying and fixing 3 pole MCCB, 100A, 16kA as directed by the Engineer-in-charge
Basic Code.No.3330 Supplying and fixing Digital Ammeter Range (0-1200A) Make: Siemens/ Legrand-Lexic 1 as directed by the Engineer-in-charge.
Basic Code No.3332 Supplying and fixing Digital voltmeter (0-500V). Make: Siemens/ Legrand-Lexic 1 as directed by the Engineer-in-charge.
Basic Code No. 1526 Supplying and fixing 200 A, TPN, adaptor box with cable end box, with TPN disconnector FSU, ISI marked HRC fuses and brass compression gland for rising mainsas directed by the Engineer-in-charge.
Basic Code No. 1105 Supplying and fixing 10 sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand) as directed by the Engineer-in-charge.
Basic Code No. 1106 Supplying and fixing 16 sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand) as directed by the Engineer-in-charge.
Basic Code No. 3334 Supplying and fixing 100/5A current transformer (0.5% precision. Make: L&T-Hagger/ Legrand-Lexic - Burden 5VA 1 as directed by the Engineer-in-charge.
Basic Code No. 1207 Suppling and fixing of 48W LED street light fittings (Philips/Havels) etc. complete as directed by the Engineer-in-charge.
Kommireddy Parasuram
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .