Loading…
Loading…
Tender ID
Tender Value
₹5.0 L
EMD Value
₹10,000
Closing Date
25 May 2026, 12:00 pmClosed
DIG, HQ 28 Sector Assam Rifles
DIG, HQ 28 Sector Assam Rifles
Repair maint and Roof treatment of QG Kote Armoury and Armourer Shop G I Bldg No NR P 16 2014 of 46 AR at Phundrei Manipur
2026_ARMHA_908134_1
46 AR/Engr/MW/2026-27/02
Open Tender
Job Works
Works
90 days
46 AR Phundrei (Manipur)
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
DIG, HQ 28 Sector Assam Rifles
₹10,000
26 May 2026
11 May 2026
26 May 2026
11 May 2026
25 May 2026
11 May 2026
11 May 2026 - 25 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 2,007.1 | Cum | - | - |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 7,365.15 | Cum | - | - |
| 3 | Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer, 3 mm thick water proofing membrane, black
finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same
membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and
viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using butane torch and sealing all joints etc., and
preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in
longitudinal and transverse direction at 23°C as 350/300 N/5 cm.
Tear strength in longitudinal and transverse direction as 60/80N.
Softening point of membrane not less than 150°C. Cold flexibility
shall be upto -2°C when tested in accordance with ASTM, D - 5147.
The laying of membrane shall be got done through the authorised
applicator of the manufacturer of membrane : 3 mm thick | 534.1 | Sqm | - | - |
stage.html
html • 0.01 MB
tech_bid_open.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
BOQ_954470.xls
BOQ • 0.23 MB
BOQ_954470.rar
PDF • 0.08 MB
BOQRAR.rar
PDF • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .