Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.1 LAccepted-AOC ALIPURDUAR DIST ALIPURDUAR | ₹18.1 L Quoted ₹18.7 L | L-1 | Accepted-AOC DUE TO BEING LOWEST AND RASONABLE |
| 2 | L-2₹19.7 LRejected-Finance | ₹19.7 L | L-2 | Rejected-Finance FOUND OTHER THAN LOWEST |
| 3 | L-3₹19.9 LRejected-Finance | ₹19.9 L | L-3 | Rejected-Finance FOUND OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | PACHNANDA BUILDERS L3 | M/s Shivam Construction Co L1 | M/s Chopra Constructions L2 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for preparation of old surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of white (lime) wash, complete all as specified and as directed . | 1,000 | Sqm | 10 ₹10,000 | 6 ₹6,000 | 4.5 ₹4,500 |
| 2.00 | M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of white (lime) wash, complete all as specified and as directed . | 200 | Sqm | 10 ₹2,000 | 7 ₹1,400 | 4.54 ₹908 |
| 3.00 | M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying two coats of white (lime) wash complete all as specified and as directed . | 50 | Sqm | 15 ₹750 | 12 ₹600 | 7 ₹350 |
| 4.00 | M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of Oil emulsion distemper (white/tined ) complete all as specified and as directed . | 2,000 | Sqm | 15 ₹30,000 | 14 ₹28,000 | 17 ₹34,000 |
| 5.00 | M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying two coats of Oil emulsion distemper (white/tined ) complete all as specified and as directed . | 1,000 | Sqm | 22 ₹22,000 | 14 ₹14,000 | 25 ₹25,000 |
| 6.00 | M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Oil emulsion distemper (white/tinted) etc complete all as specified and as directed . | 10,000 | Sqm | 15 ₹1.5 L | 34 ₹3.4 L | 17 ₹1.7 L |
| 7.00 | M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Oil emulsion distemper (white/tinted) etc complete all as specified and as directed . | 3,000 | Sqm | 15 ₹45,000 | 17 ₹51,000 | 29 ₹87,000 |
| 8.00 | M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of applying one coat of interior emulsion paint (white/tinted) over one coat of primer complete all as specified and as directed. | 2,000 | Sqm | 25 ₹50,000 | 24 ₹48,000 | 23.5 ₹47,000 |
| 9.00 | M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of applying two coat of interior emulsion paint (white/tinted) including over 3mm thick wall care putty and priming coat etc complete all as specified and as directed . | 1,500 | Sqm | 40 ₹60,000 | 24 ₹36,000 | 55 ₹82,500 |
| 10.00 | M&L for complete removal of existing treatment and applying plaster of paris putty of 2 mm thickness over on scrapped or uneven surfaces to match with the existing surfaces before application of white wash/distemper/ cement base paint etc complete all as specified and as directed. | 2,000 | Sqm | 25 ₹50,000 | 24 ₹48,000 | 24 ₹48,000 |
Updated dates
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
15 Dec 2025, 6:00 pmClosed
GE, GE (SOUTH) AKHNOOR
Garrison Engineer (South) Akhnoor Pin- 900234 C/o 56 APO
WELCOME MAINT OF OFFRS MD ACCN IN AKHNOOR MIL STN UNDER GE SOUTH AKHNOOR
2025_MES_740105_1
GES/AKH-50/2025-26
Open Tender
Civil Works
180 days
AKHNOOR
AS PER NIT
9 documents required · 9 mandatory
₹500
GE SOUTH AKHNOOR
₹50,000
9 Feb 2026
17 Nov 2025
22 Dec 2025
17 Nov 2025
15 Dec 2025
1 Dec 2025
Amount
M&L for preparation of old surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of white (lime) wash, complete all as specified and as directed .
M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of white (lime) wash, complete all as specified and as directed .
M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying two coats of white (lime) wash complete all as specified and as directed .
M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of Oil emulsion distemper (white/tined ) complete all as specified and as directed .
M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying two coats of Oil emulsion distemper (white/tined ) complete all as specified and as directed .
M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Oil emulsion distemper (white/tinted) etc complete all as specified and as directed .
M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Oil emulsion distemper (white/tinted) etc complete all as specified and as directed .
M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of applying one coat of interior emulsion paint (white/tinted) over one coat of primer complete all as specified and as directed.
M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of applying two coat of interior emulsion paint (white/tinted) including over 3mm thick wall care putty and priming coat etc complete all as specified and as directed .
M&L for complete removal of existing treatment and applying plaster of paris putty of 2 mm thickness over on scrapped or uneven surfaces to match with the existing surfaces before application of white wash/distemper/ cement base paint etc complete all as specified and as directed.
M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of applying one coat of exteriror emulsion paint (white/tinted/Green) over one coat of primer etc complete all as specified and as directed .
M&L for preparation of old decorated surfaces of wall, washing, rubbing down on painted surfaces and applying one coat of cement base paint complete all as specified and as directed .
M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and as directed .
Demolition of cement concrete (un-reinforced) concrete in ground floors and paving not exceeding 15cm thickness ( below or above ground floors.), complete all as specified and as directed .
M&L for 50mm thick plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection joint filled with bitumen sand mixer finished even and smooth without using extra cement complete all as specified and as directed.
Demolition for cement concrete exceeding 15cm thickness but above ground floor as sunken floor , complete all as specified and as directed .
M&L plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregates as filling under (sunken slab) floors, complete all as specified and as directed.
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as sides of rounded or chamfered on edges of sunken floor complete all as specified and directed.
Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required area not exc 150cm, complete all as specified and as directed.
S&F 32mm dia G I pipe beveled cut at both ends by making hole in walls sunken portion approx above the R C C slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete etc., complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises .
M&L for granite 16-18mm thick(table rubbed and polished) in cooking plateform and like in cement mortar 1:4 including pointing in white cement(1:2) using marble dust making holes in RCC shelves suitable for gas pipe with round edges where required including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.
M&L for Vitrified ceramic tiles light shade 8-10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer of mortar 1:4 cement mortar,complete all as specified and as directed.
M&L for Vitrified ceramic tiles light shade 8-10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 10mm thick rendering of mortar 1:4 cement mortar ,complete all as specified and as directed.
M&L for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer of mortar 1:4 cement mortar, complete all as specified and as directed .
M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering of mortar 1:4 cement mortar complete all as specified and as directed .
M&L for glazed ceramic coloured tiles in vertical surface/ dado, size 450x350x7mm thick or 300x450x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/ colour of tiles including laid over 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed .
M&L for grubbing up bushes, tree truck of trunk portion nexc 10cm grith including cutting of trees/bushes grown in over wall and roofs diging out roofs and making good distance area of wall/roofs with plain cement concrete 1:3:6 type and using 20mm graded crushed stone aggregate to complete all as specified and as directed.
S&F Tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore including taking down or up steel tubing or removal to store complete all as specified and as directed .
S&F Tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 20mm bore including taking down or up steel tubing or removal to store complete all as specified and as directed .
Cutting chases, pinning in, making good to facing where reqd and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exceeding 10 cm but not exceeding 20 cm girth, complete all as specified and as directed .
S&F Bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore, complete all as specified and as directed .
S&F Bib taps long body chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore, complete all as specified and as directed .
S&F stop cock 20mm cast copper alloy screwed down high pressure with or without lettered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore, complete all as specified and as directed .
S&F stop cock 15mm cast copper alloy screwed down high pressure with or without lettered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore, complete all as specified and as directed .
S&F angle valve/stop cock 15mm fancy type chromium plated cast copper alloy screwed down high pressure fixed in repair 15mm bore complete all as specified and directed.
S&F in repair pillar tap, cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore,complete all as specified and directed.
S&F in repair 15mm bore brass chromium plated 3-in-1 wall mixer for mixing hot and cold water screwed down for 15mm bore pipe with provision for hand shower and overhead shower, including extention nipple and other accessorioes. fixed complete all as specified and as directed.
S&F centre hole basin mixture, for mixing of hot and cold water, chromium plated, with round sport without pop up waste system for 15mm bore pipe, fixing in repair, complete all as specified and as directed .
S&F in repair PVC connection 15mm bore size with PTMT nuts of length 600mm long, complete all as specified and as directed .
S&F in repair PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32mm dia ,capacity 10 litres and making good to dismantled/ damaged floor/ surfaces, complete all as specified and as directed .
S&F in repair plastic water closed seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated or aliminished hinging device fixed , complete all as specified and as directed .
Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flush pipe but excluding flushing cistern) and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making good to dismantled/ damaged floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), fixing in repair, complete all as specified and as directed .
Vitreous China squatting pan, ‘Orissa’ pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to dismantled floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), fixing in repair, complete all as specified and as directed .
S&F in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain and plug and proclain stopper but including bracket, complete all as specified and as directed .
S&F in repair Brass chromium plated shower rose 125mm complete all as specified and as directed .
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complet all as specified and directed.
S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws , complete all as specified and as directed .
S&F rotational moulded polythene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltr capacity including dismantling water tanks and removing to store, complete all as specified and as directed .
S&F Rotational moulded polythene water storage tank(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity including dismantling water tanks and removing to store, complete all as specified and as directed .
S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule and 15mm bore, complete all as specified and as directed .
S & F in repair ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule and 20mm bore, complete all as specified and as directed .
S & F in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges , complete all as specified and as directed .
S&F in repair 32mm dia waste pipe for WHB/Kitchen Sink/Urinal, complete all as specified and as directed .
S & F in repair brass chromium plated jet for 15mm bore pipe for pedestal pattern water closet including PVC flexible pipe alongwith necessary fittings , complete all as specified and as directed .
S & F in repair health faucet brass body with 8mm dia and 1.0mtrs long SS braided flexible tube with wall hook, complete all as specified and as directed .
S&F for 5.50mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.
S&F in repair Stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plugs, washer and wastes pipe , cast iron cantilever brackets and connecting union over all size 915 x 460 mm with bowl size 410 mmx 330 mmx 160 mm , complete all as specified and as directed .
S&F in repair Chromium plated grating 125mm dia circular as per existing make and fixing with cement mortor 1:3 on Nahani trap or floor trap, complete all as specified and as directed .
S&F in repair PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement, complete all as specified and as directed .
S & F in repair waste coupling of PTMT (half or full threaded) 32 mm dia, complete all as specified and as directed .
S & F as in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 760 x 910mmx 230mm , complete all as specified and as directed .
Hacking out old broken glass(any thickness size quality or description) from wooden or steel frame glazed fixed with putty or fixed with beads etc, complete all as specified and as directed .
S&F sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm each pane 3mm thick, complete all as specified and as directed .
S&F Figured glass pin head type glazed with oil putty in squre not exceeding 0.5 Sqm in each pane 4mm thick , complete all as specified and as directed .
Taking down chowkhat or frame with shutter(without taking off shutter from frame) exc 1.5Sqm and not exc 4 Sqm, complete all as specified and as directed .
All as per item no. 72 here in above but not exc 1.5 Sqm each, complete all as specified and as directed .
Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm each etc, complete all as specified and as directed .
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing, complete all as specified and as directed .
S&F factory made pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, , complete all as specified and as directed .
S&F factory made pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, , complete all as specified and as directed .
M&L for providing plain cement concrete Type C-1 (1:3:6) using 20mm graded crushed stone aggregate as in back filling of steel chowkhat single or double rebated or for fixing hold fast , complete all as specified and as directed .
M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing, complete all as specified and as directed .
S&F plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick, complete all as specified and as directed .
Kitchen Cabinet size( Length and height ) as per kitchen space and width should not less then 550mm including partitions,shelves and drawers with brass sliding rails door handles door catchers , over all cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick ,ISI marked , having following specification :- (i) Outer frame made size 50x47mm with same board. (ii) Shutter both side PVC laminated termite proof board 18/19mm thick having continious piano brass hinges of 30mm flap width with one No brass handle of 75mm including brass door catcher of not less than 50 mm size in each shutter. (iii) Drawers made of both side PVC laminated termite proof board, 18/19mm thick including brass handle of front and two sliding rails at sides in each drawers. (iv) All cabinet ,drawers, frames and boards shall be fixed at site with brass screws and PVC plugs of suitable size. Note :- (a) Only front dimensions (Length and Height) at site shall be measured entered in MB irrespective of Nos of partitios or drawers. (b) Different No of partitions and drawers may be as per site requirement with out any extra cost. (c) All material and labour cost shall be deemed included in quated rate. (d) Kitchen Cabinet shall be fixed at below the kitchen platform, as directed at site.
Kitchen Cabinet size( Length and height ) as per kitchen space and width should not less then 450mm including partitions,shelves and drawers with brass sliding rails door handles door catchers , over all cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick ,ISI marked , having following specification :- (i) Outer frame made size 50x47mm with sam board. (ii) Shutter both side PVC laminated termite proof board 18/19mm thick having continious piano brass hinges of 30mm flap width with one No brass handle of 75mm including brass door catcher of not less than 50 mm size in each shutter. (iii) Fixed type shelves made of both side PVC laminated termite proof board, 18/19mm thick. (iv) All cabinet ,shelves, frames and boards shall be fixed at site with brass screws and PVC plugs of suitable size. Note :- (a) Only front dimensions (Length and Height) at site shall be measured entered in MB irrespective of Nos of partitios or drawers. (b) Different No of partitions and Fixed type shelves may be as per site requirement with out any extra cost. (c) All material and labour cost shall be deemed included in quated rate. (d)Kitchen Cabinet shall be fixed at above the kitchen platform , as directed at site.
S&F in repair 19 mm thick particle board interior grade pre-laminated on one side and other side balancing white lamination in any position such as cup boards, drawers, shutters etcc., fixed with screws to timber frame work, complete all as specified and as directed .
S&F glazed and skeleton shutters open rebated and prepared to receive (glass) gauze (without sash bars) edges of framing plain chamfered or rounted fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified 35mm thick 2nd class HW, complete all as specified and as directed .
Supply and fixing flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides for CB 25mm thick partition wall, shelves etc in repair,complete all as specified and as directed .
Extra over rates of block board or veneered particle board for external teak wood lipping 6mm thick fixed with nail on 25mm thick board ,complete all as specified and as directed .
Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs, including Glavanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvnaised wire staples and 3mm thick glass pans with oil putty and clips etc. all as shown on drawing No. CEUZ/TD-1304 sheet 1/3 to 3/3 as applicable ,complete all as specified and as directed .
S&F Glavanised Mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvnaised wire staples ,complete all as specified and as directed .
S&F Butt hinge, medium weight cold rolled mild steel and fixed 100mm long, ISI marked,complete all as specified and as directed .
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200mm long
Aluminium handle cast type anodised 150mm long, ISI marked,complete all as specified and as directed .
300mm ordinary rat tail rod pattern spring including roller plate complete fixing mild steel spring.
Aluminium alloy anodised sliding door with hasp staple (bolt type) 250mm and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrudedsection or cast aluminium alloy and fixed 250mm long, ISI marked,complete all as specified and as directed .
Floor door stopper of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long, ISI marked,complete all as specified and as directed .
Hasp and staple saftey type aluminium anodised with mild steel hinges pin including bolt to hing plate and fixed with screw size 100mm, ISI marked,complete all as specified and as directed .
Preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer on wooden surface,complete all as specified and as directed .
Preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of primer on steel surface,complete all as specified and as directed .
S&F in repair stainless steel curtain rail 20mm bore fixing with pair of brackets and side stopper complete all as specified and as directed.
M/L for providing plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate) in coping benching, bed plates and the similar including, wheathering, slightly rounded or chamfered edges and throating as directed including demolition of old and cleaning of surfaces,complete all as specified and as directed .
Demolition of brick built in cm including all quoins arches pillars etc. ,complete all as specified and as directed .
M&L for brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cm 1:6,complete all as specified and as directed .
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc,complete all as specified and as directed .
M&L 15mm thick plastering on fair faces of bricks or stone surfaces finished even and smooth without using extra cement in cement mortar 1:6,complete all as specified and as directed .
M&L 5mm thick plastering on fair faces of bricks or stone surfaces finished even and smooth without using extra cement in cement mortar 1:3 on ceiling ,complete all as specified and as directed .
M&L 15mm thick plastering on fair faces of bricks or stone surfaces finished even and smooth w/o using extra cement in cement mortar 1:4,complete all as specified and as directed .
M&L preparing of new plastered surface walls and applying three coats of white wash,complete all as specified and as directed .
M&L preparing of new surface of plaster and applying three coats of white wash on ceiling,complete all as specified and as directed .
Preparation of new surface of wall with Birla putty filling on plastering surface and applying two coat of oil emulsion white or printed on walls,complete all as specified and as directed .
Preparing of new plastered surface and applying two coats cement base paints on walls,complete all as specified and as directed .
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories),complete all as specified and as directed .
S&F for 110 mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and as directed .
S & F PVC (SWR) bends 110 mm bore ,complete all as specified and as directed .
Resecuring or easing and adjustment without taking down the shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.
Taking down shutter of any description not exc 1 sq. m and refixing in same opening after easing, adjusting and replacement of minor nails etc ,complete all as specified and as directed .
M&L for Aluminium Anodised door shutter comprising of aluminium rectangular tube of size 111.60x44.75x2.44mm thick with bottom rail of size 105x44.45x2.2mm thick lock rail of 150x44.5x3mm thick including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. including Aluminium locking bolts, anodised, with bolt not less than 10mm dia, 100 mm size complete all as specified
M&L for Aluminium Anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
M&L for Aluminium Anodised frame for doors, windows, ventilators of size 111.60x44.75x2.44mm thick with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M & L for Water proofing treatment on roof top with APP (Ataxic Poly Propylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density polyethylene film, minimum weight not less than 3.0 Kg/ Sqm, 2.0mm thick, centre core is sandwiched on both sides by high quality polymeric mix with properties of high softening point, high heat resistance and cold resistivity to make it ideal for all water proofing treatment, with polymeric mix protection on both sides with 20 micron HMHDPE film, laid over one coat of bituminous primer conforming to IS: 3384, applied @0.40 Kg/ Sqm and one coat of hot blown bitumen of 85/25 grade, conforming to IS:702, applied @1.20Kg/ Sqm on prepared surfaces of roof, overlap should be not less than 150mm at ends and 75mm at sides, joints and overlaps uniformly bounded with LPG torch flame including applying of one coat of semi hot blown bitumen of 85/25 grade, @1.20 Kg Sqm and fine screened sand in dry condition @0.50 Kg/ Sqm after laying the membrane and applying two coats of aluminium paint, complete all as specified and as directed .
S&F 5.5 mm sheet glass,ordinary quality fixed in windows in square exc 0.5 sq. m in each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed .
Point wiring (in existing conduits concealed to surface) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in existing conduit of any type and any dia including making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and with bakelite laminated sheet top cover 3.0mm thick and including FR-LSH PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed .
Description all as per serial item No- 120.00 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.
Description all as serial item No- 120.00 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.
Description all as serial item No- 120.00 here-in-before but for point wiring controlled by two way switches.
Point wiring (in existing conduits concealed to surface) for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FR-LSH, 1100 Volts, using colour coding, drawn in existing conduit of any type and any dia including making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint with bakelite laminated sheet top cover 3.0mm thick and including FR-LSH PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed .
Point wiring (concealed to surfaces) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FR-LSH,1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge here-in-before but for point wiring controlled by two way switches.
Switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and as directed .
Switch piano, flush type, single pole, two way, 5 Amps, complete all as specified and as directed .
Socket outlet, 5-pin, 5-Amps, flush type, complete all as specified and as directed .
Switch socket combination, 2-in-1, 3-pin, 5-Amps, flush type, complete all as specified and as directed .
Switch socket combination 2-in-1, 3-pin and 5 pin, 5 and 15 Amp flush type universal type, complete all as specified and as directed .
Door bell, AC, 230 Volts, single pole, ding-dong type sound, complete all specified and as directed .
Electronic dimmer, 450W, 250V flush type on the exiting phenolic laminated sheet etc. as reqd, complete all specified and as directed .
Ceiling rose, three phase/ PVC/ polycarbonate, isolated body, complete all as specified and as directed .
Lamp holder, PVC Polycarbonate type with back plate suitable for batten fittings inlcuding retrofit LED lamp of 9 Watt, complete all as specified and as directed
Bed light fitting fancy type with back plate suitable for mounting on wall with LED light of capacity 3 watt complete all as specified and directed
Description all as serial item No- 136.00 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.
Description all as per serial item No- 136.00 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.
Modular stepped type (multi-steps) electronic regulator for ceiling fan 1200 mm, 240 volts, 100 Watts, single pole, including connecting, complete all as specified and as directed .
Modular bell push switch, single pole, one way, 5-Amps, 240 volts, complete all as specified and as directed .
Modular socket outlet, 2-in-1, 3-pin, 5-Amps, complete all as specified and as directed .
Modular switch piano, single pole, one way, 5 Amps, complete all as specified and as directed .
Modular Socket 6Amps/ 16Amps, 2/3-pin combined, 2-module, complete all as specified and as directed .
Modular switch piano, single pole, one way, 15 Amps, complete all as specified and as directed .
S&F LED tube light fitting, 18/20 watt, indoor decorative aluminium extruded T5 LED battens, including LED lamp 18 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed .
S&F in repair LED mirror light, environmental friendly, ultra modern, energy saving, including LED lamp capacity 10 Watt, 2 feet long, connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified, complete all as specified and as directed .
S&F in repair Decorative, wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base., including LED lamp of 9 Watt, complete all as specified and as directed .
S&F in repair Decorative, 1 N x 9 W LED Lamp wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including LED lamp of 9 Watt.
Sub main wiring in repair (concealed conduits to surfaces) for circuits/ sub main wiring alongwith earth wire with two run of 4.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed .
Sub main wiring in repair (concealed conduits to surfaces) for circuits/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 6.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed .
Sheet metal enclosure in repair for Single Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-43, 8-way with 200 amps rated busbar, 240 volts, as per IS-8623, complete all as specified and as directed.
Sheet metal enclosure in repair for Single Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-43, 12-way with 200 amps rated busbar, 240 volts, as per IS-8623, complete all as specified and as directed.
S&F in repair MCB, Triple Pole and Neutral, 63 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed .
S&F in repair MCB, Single Pole and Neutral, 40 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed .
S&F in repair MCB, single pole, 6 to 32 Amps, 240 Volts, 50 Hz, including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed .
Supply and fixing in replacement, 1100 Volts grade, heavy duty, multi-stranded cable, PVC insulated aluminium conductor, multi-stranded, cross sectional area 10.0 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1.0 metre apart Including 4.0mm suspension wire, one twin core cable flat or circular, complete all as specified and as directed .
Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion with taking out old earthing. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.
M & L for disconnecting electric supply, taking down fan, ceiling cable ends, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts all as specified and as directed by EIC. complete all as specified and as directed by EIC. Note : Store like ball bearing, gun metal bush, capacitors and canopy required for repair/over hauling shall be measured and paid separately under relevant item of this schedule.
M & L for painting of ceiling fans (1200 mm/ 1400 mm) complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dusts including writing of MES Nos in black paint all as specified and as directed by EIC.
Dismantling of worn out/burnt out ceiling fans 1200 mm sweep and re-winding the ceiling fan with the same size of super enamelled copper wire , varnishing with approved quality insulating varnish complete including replacement of split/safety pins, locking nut, check nut , complete all as specified and directed by Engineer in charge
Description all as per serial item No 161.00 here in before but for Ceiling fans of 1400 mm sweep.
Supply and fixing in replacement of ball bearing suitable for ceiling fans of any make, type and size.
Supply and fixing in replacement of bush made out of Gun metal suitable for ceiling fans of any make, type and size.
Supply and fixing in replacement of capacitor 2.5 MFD suitable for ceiling fans of any make, type and size.
Supply and fixing in replacement of canopy suitable for ceiling fans of any make, type and size.
Suply and replacement of down rod suitable for ceiling fans of any type and size. .
Supply and fixing in replacement of clamp with nuts & bolts & locking pin suitable for ceiling fans of any make, type and size.
Supply and fixing in replacement rubber reels suitable for ceiling fans of any make, type and size.
Supply and fixing in replacement of aluminium blade for ceiling fan of 1200 mm sweep complet all as specified and directed .
M & L for hanging the repaired ceiling fan (dismantling as per item No. 159 above) and connecting up including provision of cables from ceiling rose or connector to fan all as specified and as directed .
S & F 0-4 step-1, electronic fan regulator flush type on the existing phenolic laminated sheet including taking down the old unserviceable regulator all as specified and as directed .
Taking down carefully existing exhaust fans of any make and sizes from wall , cleaning externally, opening for examination and overhauling complete by opening , cleaning of bearing ,stator ,rotor winding , providing new fresh clean proper grade lubricants oil/grease and re assembling after replacement of split/safety pins, MS nuts and bolts , including replacement of old existing flexible cord connected from ceiling rose to fan including re-writing MES/ SL No. with black synthetic enamel paint , refixing the same in position complete all as specified and directed by Engineer in charge. Note:-Store like ball bearing, gun metal bush and capacitors required for repair/overhauling shall be measured and paid separately under relevant item of this schedule complet all as specified and directed .
Dismantling of worn out/burnt out Exhaust fans 250 mm to 300 mm sweep and re-winding the exhaust fan with the same size of super enamelled copper wire , varnishing with approved quality insulating varnish complete including replacement of split/safety pins, rusted nut ,bolt and washer complete all as specified and directed .
Supply and fixing in replacement of ball bearing suitable for exhaust fans of size from 250 mm to 300 mm sweep.
Supply and fixing in replacement of capacitor suitable for exhaust fans of size 250 mm to 300 mm sweep.
M & L for painting of Exhaust fans of size 250 mm to 300 mm sweep complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dusts all as specified and as directed .
Supply and fixing in replacement of louvers shutter complete with nuts, bolts and washers suitable for exhaust fans of size 250 mm to 300 mm sweep complete all as specified and directed .
Supply and fix deficient exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm,complete all as specified and directed .
M&L for making hole on masonary wall/ Wodden Panel of size suitable for exhaust fan complete incl finishing and making good as per existing all as specified and directed .
Labour only to find out defects and for testing geysers of any capacity of vertical and horizontal geysers for proper functioning by checking the thermostat, heating elements, indication lamps, cable cords and connections, 15 Amps socket and top, inlet and out let water pipes etc complete all as specified and as directed. Note : If any defects observed during testing shall be repaired in respected item of Sch 'A' which is measured and paid separately and spares required to be changed shall be measured and paid separately complet all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of geyser element I.5 KW as per existing pattern fitted in the geyser all as specified and directed.
Description all as per item No 182.00 above but 2.0 KW complete all as specified.
Supply and fix in replacement of lamp indicator red/green all as per site requirement and specified.
S & F PVC connection with PTMT nuts of length 450 mm as inlet for cold water including taking down the old unserviceable PVC connection pipe complete all as specified and as directed .
S & F PVC connection, spirally reinforced with stainless steel wire inside the pipe for outlet hot water pipe connection, with brass nuts at both ends of length 450 mm including taking down the old unserviceable PVC pipe all as specified and as directed by EIC.
Supply and fixing in replacement of inner tank of 25 ltr capacity of tinned/ copper as per existing make all as specified and directed as per site requirement.
Supply and fixing in replacement of inner tank of 35 Ltrs capacity geyser of tinned /copper as per existing make all as per site requirement and as directed.
Supply and fixing in replacement of glass wool/mineral wool same as (Thermal insulation) for 25 ltrs capacity geyser all as directed.
All as per item No 189.00 above but for 35 ltr capacity geyser complete all as specified.
Supply and fix replacement of thermostat (Thermal cut out) suitable for geyser to be repaired as per approved make and capacity 25-50 ltrs complet all as specified and directed .
Supply and fix replacement of pressure release valve suitable for 25-50 ltrs capacity geyser as per existing make and type all as site requirement.
Supply and fix in replacement of 3 core multi strand copper conductor PVC insulated cable 2.5 Sqmm,1100 volts grade complete all as specified and directed .
S & F 3 pin plug top 15 Amps, 240 volts including taking down old unserviceble 3 pin plug top 15 amps all as specified and as directed .
Material and labour for painting the geysers of 25 ltr capacity with two coats of synthetic enamel paint white with spray gun including preparation of surfaces area of geyser,filing cavities with filler after cleaning all dust complet all as specified and directed .
All as per item No 195.00 above but of 35 ltr capacity geyser complete all as specified.
Supply and fix in replacement of Heating element suitable to Bajaj Calenta Geyser complet all as specified and directed.
Supply and fix in replacement of Thermostat suitable to Bajaj Calenta Geyser complete all as specified and directed .
Supply and fix in replacement of internal water tubing assembly 6/9 holes for 25 Ltr cap geysers including synthetic rubber gasket of suitable size matching with existing holes and tightening all as directed .
All as per item No 199.00 above but 35 ltr capacity complete all as specified.
Supply and fixing deficient ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC),complete all as specified and directed .
M & L for fixing in repair of pvc insulated FRLSH cable with multistranded copper conductor 1100 volt grade of size 6 Sqmm for connection from MCB to Elect Meter by using clips in Meter box all as specified and as directed. Note : two runs of cable shall be measured as one unit length complet all as specified and directed .
M/s Chopra Constructions (BID ID -3498109)
PACHNANDA BUILDERS (BID ID -3498127)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
BOQ_828726.xls
BOQ • 2.22 MB
TD502526.pdf
Tender Documents • 1.27 MB
Download all tender documents and submit your bid