MAINTENANCE AND REPAIRS TO BUILDINGS SECURITY LIGHT PASSGAE PARKING LIGHTS CONNECTED WORK AT WORLI BORIVALI AND POWAI AT MUMBAI UNDER GE DAMAN

Amount

Taking down carefully existing unserviceable street light fitting any type , 1 x36 FTL, 35/60/100 watts CFL/HP/SV any watts from existing location , complete all as specified and directed.

Supply and fix LED street light fitting 45 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Make:-Halonix model No.HLSLD-14-45-CWL /SHAKTI cat part No SZPSLMM045 or equivalent make in Havells/Philips/ Bajaj

Supply and fix LED post top lantern light fitting 30 watt made in die cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection complete with all accessories including fixing arrangement on boundary wall pillar by providing GI pipe top on surface of boundary wall of suitable size and length as per site requirement and making good the disturbed portion of compound wall to match with existing surface complete all as specified and directed. Make :- Halonix Cat No HLPT-03-30-CW / SHAKTI cat part No SZPGPMX030 or equivalent make in Havells/Philips/ Bajaj

Supply and fix LED post top lantern light fitting 25 watt made in die cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection complete with all accessories including fixing arrangement on boundary wall pillar by providing GI pipe top on surface of boundary wall of suitable size and length as per site requirement and making good the disturbed portion of compound wall to match with existing surface complete all as specified and directed. Make :- Bajaj Cat No BLPTSP 25W NW LED or equivalent equivalent in Havells/Philips/SHAKTI

Supply and fix LED post top lantern light fitting 45 watt made in die cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection complete with all accessories including fixing arrangement on boundary wall pillar by providing GI pipe top on surface of boundary wall of suitable size and length as per site requirement and making good the disturbed portion of compound wall to match with existing surface complete all as specified and directed. Make :- Bajaj Cat No BRIL 45W LED NW or equivalent equivalent in Havells/Philips/SHAKTI

Supply and fix LED flood light luminaire 50 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. including removing old unserviceable items complete all as specified and as directed by Engineer-in-Charge. Make : Halonix model No HLFLD-ML12-50-CWl / SHAKTI cat part No SZCFLPH050 or equivalent make in Havells/Philips/ Bajaj

Supply and fix in repair LED tube light fitting 1X 20 Watt including LED light 20 watt, industrial channel made of CRCA sheet steel housing suitable for complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of 0.75 Sqmm size and PVC square block for fixing LED tube fitting complete all as specified and directed. Make:- Halonix Cat No HLB-07-20-CW or equivalent in Bajaj/Philips/SHAKTI

Supply and fix recess mounting down lighting LED light fitting round type 15 watts , high efficient , internally prewired, white powder coated housing with high efficient LED's and glare free full opal diffuser with IP20 protection and making cable connection by providing three core 0.75 sqmm copper conductor cable PVC insulated, sheathed of adequate length from ceiling rose to fitting complete with all accessories and necessary fixing arrangement at any height complete all as specified and directed. Make:- Halonix model No HLDLR-R06-15-WW or equivalent make in Bajaj/Philips/ Shakti.

Supply and fix surface mounting down lighting LED light fitting round type 15 watts , high efficient , internally prewired, white powder coated housing with high efficient LED's and glare free full opal diffuser with IP20 protection and making cable connection by providing three core 0.75 sqmm copper conductor cable PVC insulated, sheathed of adequate length from ceiling rose to fitting complete with all accessories and necessary fixing arrangement at any height complete all as specified and directed. Make:- Halonix model No HLDLS-R06-15-WW or equivalent make in Bajaj/Philips/ Shakti

Supply and fix GI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and the GI bracket pipe shall be fixed on wall/pole surfaces by providing suitable MS iron 32x6 mm clamps 2 nos of 25 cm long duly to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts,bolts & washers and removing of old unserviceable item complete all as specified and directed. Make of GI pipe:- Jindal/Tata/BST

Supply and fix FRP looping box with connector and comprising of MCB SP 6 Amps,10KA ,"C"series,240V including fixing arrangements by providing MS flat iron clamps of size 25x4 mm etc suitable for fixing on PCC pole/ wall etc and including removing old unserviceable item complete all as specified and directed Make:- National/Sintex, Make of MCB:- Legrand / L&T / Havells / Indo Asian .

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire of size 4 mm dia from earth electrode to test point/equipment or up to 7.5 metres whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1,including excavation/earth work in any strata and returning filling, removal of surplus soil and testing for required value including removing unserviceable item complete all as specified and directed.

Taking out existing underground defective cable of any type and size from the trenches and from any other locations (including taking out of cable covers, pipes etc) complete all as directed.

Supply,laying and testing LT cable XLPE insulated,galvanised steel strip armoured,1100 volts grade with stranded aluminium conductor of cross-sectional area 6 sqmm , 2 core , laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing including removing old unserviceable item complete all as specified and directed.

Supply, installation, testing and commissioning LT panel board suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation, factory fabricated made out of 3.2 mm thick CRCA sheet duly powder coated and shall be CPRI approved and as approved by GE. The Panel shall have front and rear opening, locking arrangement, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminium bus bar duly covered with heat shrink sleeves colour coded duly fixed on DMC/SMC insulators, aluminium strip connection from bus bar to outgoing MCCBs and copper conductor cable of adequate size for MCBs, housed in a separate bus bar chamber and control wiring adequate size and length, outgoing MCCBs shall have extended bus bar links and Panel mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) in foundation design subject to approval of GE as per site requirement. The minimum depth, height, width of panel is 450x1800x1500 mm respectively, minimum clearance from ground level is 450mm including removing old unserviceable item complete all as specified and directed and comprising of following :- Notes :- (i) contractor shall provide CPRI certification of the panel. (ii) All items incorporated in panel shall be ISI marked . Make for MCCB :-Schneider/L&T/Legrand/Standard. Make for CT :- Nippen/AE , Make of LED Lamp:- Teknic, Make for amp meter and volt ,meter :- AE/Kaycee (a) On-load change over switch 630 Amps,4Pole,415 V,50Hz front handle operated,open execution type -01 No (b) MCCB 400 Amps,FP,25 KA,415 volts,50Hz-1 Nos (c) MCCB 100 Amps,FP,16 KA,415 volts,50Hz-7 Nos (d) Digital voltmeter,with VSS -01 set,Digital, Ammeter,with CTs & ASS-01 set (e) LED phase indication lamps RYB-01 set (f) Aluminium bus bar TPN 600 Amps rating -01 set

M&L for factory fabricated sheet steel enclosure made out of 3.15 mm thick CRCA sheet, powder coated and including provision of knock out holes for incoming and outgoing cables , suitable for and including MCCBs 4 pole, 400 Amps, 36 KA ,415 V and 600 amps rating aluminium bus bar and necessary fixing arrangement by providing MS flat iron frame (steel sections other than sheet metal enclosure shall be painted with 2 coats of synthetic enamel paint over 1 coat of red oxide primer) on wall/in existing panel board complete all as specified and directed.

M&L for factory fabricated sheet steel enclosure made out of 3.15 mm thick CRCA sheet, powder coated and including provision of knock out holes for incoming and outgoing cables suitable for and including MCCBs 4 pole, 200Amps , 25 KA,415 V Amps and 300 V rating aluminium bus bar and necessary fixing arrangement by providing MS flat iron frame (steel sections other than sheet metal enclosure shall be painted with 2 coats of synthetic enamel paint over 1 coat of red oxide primer) on wall/in existing panel board complete all as specified and directed.

M&L for factory fabricated sheet steel enclosure made out of 3.15 mm thick CRCA sheet, powder coated and including provision of knock out holes for incoming and outgoing cables suitable for and including MCCBs 4 pole, 100 Amps 25 KA,, 415Vand rating aluminium bus bar and necessary fixing arrangement by providing MS flat iron frame (steel sections other than sheet metal enclosure shall be painted with 2 coats of synthetic enamel paint over 1 coat of red oxide primer) on wall/in existing panel board complete all as specified and directed. Schedule of Credit : Rs 13440 /-

Radha Engineering Services

Bikarma Enterprise

A P ENTERPRISES

PANKAJ AND BROTHERS