Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹9.9 LAdmitted-Finance | -7.25% | ₹9.9 L | L1 | Admitted-Finance |
| 2 | L2₹10.0 L+₹13,869.23 (1.40%)Admitted-Finance 6 KAMMAVAR STREET MITTANAMALLEE IAF AVADI TIRUVALLUR TAMIL NADU 600055 | THIRUVALLUR | TAMIL NADU | 600055 | -5.95% | ₹10.0 L+₹13,869.23 (1.40%) | L2 | Admitted-Finance |
Tender Value
₹10.7 L
EMD Value
₹21,340
Closing Date
13 Aug 2026, 6:00 pmClosed
Executive Engineer
m and h divi I jaipur
SITC of Air Conditioning work in the Construction of New CHC Building at Rajnota, District Kotputli Behror
2026_MEDIC_582896_3
NIT 31 2026-27 Div Jaipur 1
Open Tender
Electrical Works
Percentage
180 days
Kotputli-Behror
refer bid
2 documents required · 2 mandatory
₹500
refer bids
₹21,340
19 Aug 2026
6 Aug 2026
14 Aug 2026
6 Aug 2026
13 Aug 2026
6 Aug 2026
6 Aug 2026 - 13 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | - | - | - | - |
| 3 | 1.5 TR ISEER not less then 3.8 | 10 | Each | 48,875 | ₹4,88,750 |
| 4 | 2.0 TR ISEER not less then 3.8 | 6 | Each | 63,731 | ₹3,82,386 |
| 5 | Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | 16 | Each | 580 | ₹9,280 |
| 6 | Supply, Fixing and testing of following capacity ISO certified company made wall mounted stabilizer having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp /20 Amp Industrial plug top making connection etc complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | - | - | - | - |
| 7 | 4 kVA | 10 | Each | 3,375 | ₹33,750 |
| 8 | 5 kVA | 6 | Each | 4,185 | ₹25,110 |
| 9 | Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | - | - | - | - |
| 10 | 25 mm | 60 | Mtr. | 229 | ₹13,740 |
| 11 | SITC of Interconnecting refrigerant copper pipe for split/Ductable/ Casseette AC of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. Piping between each set of indoor & outdoor units of different sizes as per OEM requirement & specifications including class 'O' Nitrile rubber sleeves, chase cutting, supports, making good the same with sand cement plaster etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | 10 | Kg | 1,987 | ₹19,870 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.95 MB
Tendernotice_2.pdf
PDF • 35.86 MB
Tendernotice_3.pdf
PDF • 0.19 MB
Tendernotice_4.pdf
PDF • 0.46 MB
Tendernotice_5.pdf
PDF • 0.26 MB
Tendernotice_6.pdf
PDF • 0.50 MB
Tendernotice_7.pdf
PDF • 0.50 MB
Tendernotice_8.pdf
PDF • 0.44 MB
Tendernotice_9.pdf
PDF • 3.44 MB
BOQ_1035994.xls
BOQ • 0.35 MB
datecorrigendum.pdf
PDF • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .