8490 PROVISION OF LANDSCAPING AND ARBORICULTURE FOR AUDITORIUM CUM CINEMA HALL AT PUNE UNDER GE (CENTRAL) PUNE

Amount

Site Clearance including removing grass,bushes etc in any type of soil complete all as specified and as directed.

Supplying and planting of lawn (Grassing) as per following specifications :- (a) Excavation in ordinary soil upto a depth of 30cm including removal & stacking of serviceable materials. (b) Rough dressing the trenched ground uprooting weeds flooding with water. (c) Transporting & stacking of good earth & manure, mixing in the ration of 1:3 (one part of manure and three part of good earth spreading as specified or directed. (d) Fine dressing the ground. (e) Grassing including watering until establishment of the lawn. (f) Final levelling by spreading sand & good earth mixture, manuring. (g) The type of lawn grassing are as under :-

(i) American Grass (Carpet grass)

(ii) Cynadon dactylon / Durva Gavat

(iii) American Blue Lawn

(iv) Monkey Grass / Mondo Grass

(v) ADATHODA VASICA (VASAKA)

(vi) Wedilia - Sphagneticola Trilobata

(vii) CRINUM ASIATICUM (PINDAR)

Note for item No 2.01 to 2.07:- (1) Cost of supply of earth and manure deemed to be included in quoted rates by contractor. (2) Serviceable earth obtained from the excavation shall be stacked and reused upto 6 inch thick layer after screening i.e removing kankar, stones, pebbles, moorum , shingle, rocks, stones, brick bats ,,weeds & shall be made free from rubbish after approval of Engineer-in-charge. (3) Fresh Good soil shall be used upto 6 inch thick layer after soil reused as mentioned in Note No. 2 above.

M & L PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in foundation , filling & mass concrete etc complete all as specified and directed.

M & L brick work with fly ash bricks, straight or curved on plan exc 6 Mtremean radius, built in CM 1:4, complete all as specified and directed.

M & L for 15mm thick rendering on other than fair faces of brick / concrete surfaces in CM 1:6 finishing surfaces even & smooth without using extra cement complete all as specified and directed.

M & L for preperation of new plastered surface of walls and applying three coat of white wash complete all as specified and directed.

Supply and laying 20mm bore dia CPVC pipes SDR 13.50 & Plain CPVC SDR 11 fittings laid in trenches complete all as specified and as directed.

S & F for 20mm bore dia sprinker two way of gun metal complete all as specified & directed.

Supplying and planting of Shurbs as per following specifications:- (a) Excavation of pits of size 0.3 x 0.3 x 0.3 Mtr in any type of soil including removal of surplus soil complete all as specified and directed. (b) Filling pits with prepared manure soil (ratio 1:2 i.e. 1 Manure : 2 Good earth by volume), Supply , transporation & mixing of soil improvement nutrients including manure as required and removal of rubbish & surplus, applying inside a coat of CHLOROPYROPHOS 30% EC (DE-NOCIL0) in all pits flooding with water, dressing including earth if any with all leads & lifts, planting & staking in full & final locations as directed by Engr-in-charge. (c) Planting of fwg shrubs :-

(i) Jatropha curcus

(ii) Alpinea Zerumbet var

(iii) Calathea triostar

(iv) Daracena mahatma

(v) Galphimia glauca

(vi) Hamelia

(vii) Nerium oleander

(viii) Lantana Blue

(ix) Helliconia PSI

(x) TULSI

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30cm in depth, 1.5 Mtr in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 Mtr and lift upto 1.5 Mtr complete all as directed by Engineer-in charge.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc and for laying og cables , pipes, ploles etc, not exc 10 Sqm on plan and not exc 1.5 Mtr in depth and getting out in any type of soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed.

Removing excavated material (soil) to a distance not exc 50 Mtr and depositing where as directed at a level not exc 1.50 Mtr above the starting point all as specified and as directed.

Removing excavated material (soil) to a distance exc 1.50 KM but not exc 5.00 KM and depositing where as directed all as specified and as directed.

M & L 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L 20-25mm thick Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L 60mm thick grey zigzag paver block of size 250 x 250mm, laid over and including 50mm thick sand counshning complete all as specified and directed

Supply only 20mm Graded coarse stone aggregate complete all as specified and directed.

M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete complete all as specified and directed.

Supplying and planting of Trees as per following specifications :- (a) Excavation of pits of size 0.50 x 0.50 x 0.50 Mtr in any type of soil incls removal of surplus soil. complete all as specified and directed. (b) Filling pits with prepared manure soil (Ratio 1: 2 i.e. 1 manure : 2 good earth (Garden soil) by volume) supply transporation & mixing of soil improvement nutrients including manure as required and removal of rubbish & surplus, applying inside a coat of CHLOROPYROPHOS 30% EC (DE-NOCIL) in all pits flooding with water, dressing including earth if any with all leads & lifts, planting & staking in full & final locations as directed by Engr-in-charge. Note : The cost of supply of earth and manure deemed to be included in quoted rate. (c) Planting trees of different varities having 1.00 Mtr to 1.50 Mtr height and one year old with proportionate girth in the filled up pits and watering the plants at regular intervals as required till physical completion of the work (Phase-I), complete all as specified and directed. (d) The type of Treas and their apprx quantity required at site are as under :- ,

(i) CASSIA FISTULA

(ii) SITA ASHOKA

(iii) PLUMERIA ALBA

(iv) AMLA

(v) Plumeria Ruba

(vi) NEEM

M & L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in cills, coping, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating with and including use and waste of necessary form work complete all as specified and directed.

M & L for 75mm cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) thick as in path / sub base, finishing the surface even and rough complete all as specified and directed.

M & L for glazed ceramic coloured tiles of size 300 x 300 x 6mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 15mm thick screed in CM 1:6, complete all as specified and directed.

M & L for glazed ceramic coloured tiles of size 300 x 300 x 6mm thick as on vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for coats of Dr Fixit Pidipin 2k, 2-Parts flexible comentitous water proof membrane coating over concrete/ plastered surface with average of 2kg/m2, all as per manufacture instruction and as specified by Enger-in-Charge.

Supply, Install, testing and commissioning Open well Submersible Pump set of capacity 3 HP, 3 phase, AC, 50 Hz with suction and delivery of size 65 x 50mm, head minimum 12 Mtr , discharge capacity of pump set 8.80 LPS and including outdoor type starter panel comprising supply & fixing suitable starter for pump and space for placing driver, controller alongwith its wiring for light fitting including all accessories and including submersible cable of suitable size from starter panel to Pump and complete all as specified and as directed. MAKE :- Model No - KOS-325+ of Kirloskar or equivalent makes as given list of Makes in Appdx 'A'. Note :- 1. RCC / PCC foundation, MS Structure work, Civil work etc for mounting of Pump as per design, specification and recommendation of manufacturer / OEM as directed and shall deemed to be included in quoted rates. No extra claim will be entertain in this account. 2. The quoted rate shall deemed to be inclusive of starters, Panels, MCCBs, MCBs, connectors, wiring etc for controlling, switches on / off of pumps lights of fountain etc that are required for above mentioned pumps & lights

Supply, Install, testing and commissioning Open well Submersible Pump set of cap 5 HP, 3 phase, AC, 50 Hz with suction and delivery of size 80 x 80mm, head minimum 14 Mtr , discharge capacity of pump set 14.90 LPS and including outdoor type starter panel comprising supply & fixing suitable starter for pump and space for placing driver, controller alongwith its wiring for light fitting including all accessories and including submersible cable of suitable size from starter panel to Pump and complete all as specified and as directed. MAKE :- Model No - KOS-325+ Make Kirloskar or equivalent or equivalent makes as given list of Makes in Appdx 'A'. Note :- 1. RCC / PCC foundation, MS Structure work, Civil work civil work etc for mounting of Pump as per design, specification and recommendation of manufacturer / OEM as directed and shall deemed to be included in quoted rates. No extra claim will be entertain in this account. 2. The quoted rate shall be inclusive for starters, Panels, MCCBs, MCBs, connectors, wiring etc for controlling, switches on/off of pumps lights of fountain etc that are required for above mentioned pumps & lights

Supply and install Water proof light under water, IP-68 Stainless Steel Body, 27 Watt, 9 LED RGB, suitable for Nozzle mounting including control submersible copper wirings of size 4 core 1.5 sqmm complete all as specified and directed.

Supply and install LED driver capacity of 600 Watt, 32 Amps for light fitting and RGB controller for controls of lights alongwith control copper wiring of size 4 core 1.5 Sqmm from driver to Light fittings complete all as specified and directed.

Supply and install Brass Foam Nozzle with Ball Joint alongwith UPVC ball valve of size 25mm complete ll as specified and directed.

Supply & lay 50mm bore dia UPVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors / trenches etc including all fittings such as bends, elbows, tees, short pieces, union, UPVC brass MT, FT etc alongwith with jointing materials complete ll as specified and directed.

Supply & lay 25mm bore dia UPVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors / trenches etc including all fittings such as bends, elbows, tees, short pieces, union, UPVC brass MT, FT etc alongwith with jointing materials complete ll as specified and directed.

Supply & lay 15mm bore dia UPVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors / trenches etc.including all fittings such as bends, elbows, tees, short pieces, union, UPVC brass MT, FT etc alongwith with jointing materials complete ll as specified and directed.

Supply & Fix 25mm bore dia UPVC Ball valve for controlling of water to the circular ring complete all as specified and as directed

Supply and install 15mm size Cascade Nozzle Stainless Steel with Ball Joint alongwith UPVC ball valve of size 25mm bore dia complete all as specified and as directed.

Supply and install Water proof light under water, IP-68 SS Body,, 18 Watt RGB suitable for Nozzle mounting including all control submersible copper wirings of size 4 core 1.50 Sqmm complete all as specified and as directed.

Supply and install Water proof light under water, IP 68 SS Body, 18 Watt RGB Spot Light , wall mounted including all control submersible copper wirings of size 4 core 1.50 Sqmm complete all as specified and as directed.

Supply, fabricating and installation of 50mm GI pipe ring suitable for round fountain approx outer diameter of ring 13 feet including GI nipples of size 1/4" welded to the ring at every 7" interval on ring for mounting of fountain nozzle, flanges to be welded at the end of curved pipe ring at every 11 feet interval on the ring with all including flange joint alongwith rubber gasket, nuts, bolts, washers etc, sockets of 1" bore to be welded on ring at approx 13 feet interval for inlet water connection, barrel nipple of 1" bore approx 1 to 2 feet long min 04 Nos welded and fixed to the curved ring of GI pipe at bottom for support of ring from floor complete aall as specified and as directed. Note :- GI Nipples, MS Flanges, Flange joints and jointing materials and any other MS structural requirement at site shall deemed to be included in the quoted rate against this item.

All as per item No 38 above but outer diameter of ring of size 6 feet complete all as specified and as directed.

Supply & Fix Adjustable brass Nozzle of size 1/4'' screwed on GI pipe ring / socket complete all as specified and as directed.

Supply & lay 50mm bore dia galvanized iron pipe medium grade including all fittings laid in trenches / walls / ceiling or floors complete all as specified and as directed.

Supply & lay 25mm bore dia galvanized iron pipe medium grade including all fittings laid in trenches / walls / ceiling or floors complete all as specified and as directed.

S & F 50mmm bore dia Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F 25mm bore dia Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M & L cutting existing CI/DI pipeline of size 150/100mm bore dia in position for inserting CI/DI specials / fittings as required at site such as Tees, Collars, Tail Pieces, Reducers, Flanges, Bends etc including required excavation and earthwork complete all as specified and as directed. Note : Specials / Fittings such as Tee, Collar, Tail Piece, Reducer, Bends etc wiil be measured and paid separately.

M & L for MS flanges, Reducers of any type duly threaded as per required size duly drilled holes including nuts, bolts, washers, gaskets etc including welding to flange and GI Pipe wherever necessary complete all as specified and as directed.

M & L for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, CI Bends tapers, Tees, pieces (Single or double branch) any type and angle / radius and straight connecting pieces for CI/DI Pipe upto 200 mm bore complete all as specified and as directed.

M & L 25mm bore dia Ball brass valves, high pressure, with polythene float and flynut screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.50 Metres below normal ground level connected to and including GI wire 4.0mm dia and GI pipe 15mm dia light grade for protection to the extent of 7.50 Mtr as earthing lead by means of GI bolts and nuts etc connecting to equipment with provision of charcoal and salt etc all as per electrical plate No 3 of SSR Part--I incliding RCC cover and MS angle iron frame, watering arrangement with GI pipe 20mm bore dia and MS funnel, concrete pit incuding excavation and earth work in any type of soil and testing on completion etc complete all as specified and as directed. (Note :- GI earth wire 4.0mm dia and 15mm dia protection pipe upto 7.5 metre from earth plate shall deemed to be included in quoted rates.)

Supply, laying, testing, commissioning of LT cable, 1100 Volt grade, XLPE insulated, armoured, heavy duty electric cable including end termination with necessary cable glands, lugs etc laid in trenches / poles / walls through pipes etc ISI Marked with multistranded aluminiuim conductor, cross sectional area 25 Sqmm 4 Core complete all as specified and as directed.

Supply, laying, testing, commissioning of LT cable, 1100 Volt grade, XLPE insulated , armoured heavy duty electric cable including end termination with necessary cable glands, lugs etc laid in trenches / poles / walls through pipes etc, ISI Marked with multistranded aluminiuim conductor, cross sectional area 10 Sqmm 4 Core complete all as specified and as directed.

Supply, laying, testing, commissioning of LT cable, 1100 Volt grade, XLPE insulated, armoured heavy duty electric cable including end termination with necessary cable glands, lugs etc in trenches / poles / walls through pipes etc, ISI Marked with multistranded aluminiuim conductor, cross sectional area 6 Sqmm 4 Core complete all as specified and as directed.

M & L 50mm outer dia double walled corrugated (DWC) HDPE duct pipe conforming to IS-14930 Part-II with antirodent and non flame propagating properties of approved colour with including all fittings for cable protection complete all as specified and directed.

Supply and fixing of LT panel outdoor type made out of 3mm thick CRCA sheet totally enclosed conforming to relevant IS / IEC, CPRI approved tested and suitable bus bar including angle iron frame made out of 40 x 40 x 5mm angle duly powder coated with 60cm legs duly grouted with PCC complete all as specified and as directed comprising the following :-

(a) Insulated Aluminium bus bar of capacity 200 Amps for 3 Phase and Neutral (RYBN) mounted on porcealin / fibre insulated.

(b) MCCB TPN 100 Amps, 415 Volts, AC, 50 Hz, 10 KA rupturing capacity as incoming - 01 No

(c) MCB TPN 32 Amps, 415 Volts, AC, 50 Hz, 10 KA rupturing capacity as outgoing - 05 Nos

(d) Power contactor 3 Pole, AC, 40 Amps coil voltage 240 Volts - 01 Nos

(e) Digital timer for controlling the contactor, single phase, 230 Volts AC

(f) MCB SP 06 Amps, 230 Volts, AC, 50 Hz - 03 Nos

(g) Switch socket combination multipurpose 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete - 01 Nos

(h) Indicator lamps(RYB) - 01 Set

(j) Control wiring for automatic operation of street lights with by pass arrangement all as specified and as directed.

(k) Incoming and outgoing terminals with suitable cable

Complete maintenance after physical completion of work of plants, Shurbs, hedges, grass by watering, weeding hosing, saucer making for plants / hedge / carpet grass / country grass / doob grass, burmuda grass, pruning dried branches by deploying two gardner daily (excluding sunday) and depositing the material at place as directed and planting the new plants in place of dead plants of same species and height tuning with dods wherever required by replacing the dead patches of grass with the same grass as required without extra cost to the department all as directed by Eng-in-Charge. Note :- Manure and pesticide required for maint of plant under this item shall be arranged by the contractor at his own cost and rate of the same shall deemed to be included in the unit rate quoted against this item.

Santosh Pandurang Pise (BID ID -3070362)

UNIQUE ENGINEERS (BID ID -3074866)

Gruham Luxe Interiors (BID ID -3065041)