SUPPLY and INSTALLATION OF MODULAR KITCHEN FOR PHASE II WORK OF NORTH EASTERN INSTITUTE OF AYURVEDA and HOMOEOPATHY (NEIAH) MAWDIANGDIANG, SHILLONG (MEGHALAYA) 3rd Call

Amount

Galvanised Steel Modular Kitchen -(Type-III) - (2400X2250)

Sub Head: Modular Kitchen - Base cabinets

Plain Shelf Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Shelf Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 600 mm W x 700 mm H x 560mm D .Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel fixed to the cabinet using soft closing Hettich make hinges. Openable Shutters to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will consist of shelves that shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirement. The unit shall be fixed to the wall using metal screws of appropriate size and rawl plugs.

Thali Unit (700mm H x 600mm Wx 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Thali Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade with cutlery tray provision & plate stacking provision in wire basket ( 100mmH + 100mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Cooking Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Cooking Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade plain with cutlery tray provision & wire baskets( 100mmH + 100mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Gas Cylinder Unit (700mm H x 450 mmW x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Gas Cylinder Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 450 mm W x 700 mm H x 560mm D . Openable Shutter shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Plain Sink Unit (700mm H x 900mm W x 560mm D )

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Sink Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 900 mm W x 700 mm H X 560 mm D. Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter(s) attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Tandem Box Drawer Unit (700mm x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Tandem Box Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H X 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 2 Big unit of Size ( 150mmH +150mm H) and fittings required SS screw for fixing above Tranquil slide of make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Sub Head: Modular Kitchen : Wall units (Type-III)

Top Self Unit ( 700mm H x 600mm W x 330mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge. The Top Shelf Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade& 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of Variable size : 600mm W x 330 mm D x 700 mm H . Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel ( wooden texture ) fixed to the cabinet using Soft closing Hettich make hinges. Openable Shutters to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will consist of shelves that shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirement. The unit shall be fixed to the wall using metal screws of appropriate size and rawl plugs.

Galvanised Steel Modular Kitchen -(Type-IVA) - (2400X2750)

Sub Head: Galvanised Steel Modular Kitchen - Base cabinets (Type-IVA)

Plain Shelf Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Shelf Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 600 mm W x 700 mm H x 560 mm D. Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel fixed to the cabinet using soft closing Hettich make hinges. Openable Shutters to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will consist of shelves that shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirement. The unit shall be fixed to the wall using metal screws of appropriate size and rawl plugs.

Thali Unit (700mm H x 500mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Thali Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 500mm W x 700mm H X 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade with cutlery tray provision & plate stacking provision in wire basket ( 100mmH + 100mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Cooking Unit (700mm H x 600mm W X 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Cooking Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade plain with cutlery tray provision & wire baskets( 100mmH + 100mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Gas Cylinder Unit (700mm H x 450mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Gas Cylinder Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 450 mm W x 700 mm H x 560mm D . Openable Shutter shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Tandem Box Drawer Unit (700mm x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Tandem Box Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 2 Big unit of Size ( 150mmH +150mm H) and fittings required SS screw for fixing above Tandem Box of Hafele make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (,Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Plain Sink Unit (700mm H x 900mm W x 560mm D )

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Sink Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 900 mm W x 700 mm H x 560mm D . Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter(s) attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Sub Head: Interio Galvanised Steel Modular kitchen : Wall units (Type-IVA)

Gas liftup Top Unit ( 700mm H x (900mm/600mm W x 330mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge. The Gas liftup Top Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade& 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall size 900mm/600mm W x 330mm D x 700 mm H . Openable Shutter shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel ( wooden texture ) fixed to the cabinet using Soft closing Hettich make hinges & Blum Liftup Hardware Openable Shutters to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will consist of shelves that shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirement. The unit shall be fixed to the wall using metal screws of appropriate size and rawl plugs.

Galvanised Steel Modular Kitchen -(Type-IVB) - (2400X2750)

Sub Head: Interio Galvanised Steel Modular kitchen - Base cabinets (Type-IVB)

Plain Shelf Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Shelf Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 600 mm W x 700 mm H x 560mm D. Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter(s) attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Thali Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Thali Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade with cutlery tray provision & plate stacking provision in wire basket ( 100mmH + 100mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Utensil Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Utensil Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade plain wire baskets( 150mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Bottle Pullout Unit (700mm H x 300mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Bottle Pullout Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall size 300mm/200mm W x 700 mm H x 560mm D . Pullout facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Pullout Facia to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Pullout Facia attached to the cabinet with 500 mm CED coated full ext. ball slides ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Gas Cylinder Unit (700mm H x 450mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Gas Cylinder Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 450 mm W x 700 mm H x 560mm D. Openable Shutter shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Tandem Box Drawer Unit (700mm x 500mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Tandem Box Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 500mm W x 700mm H x 560mm D Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 2 Big unit of Size ( 150mmH +150mm H) and fittings required SS screw for fixing above Tandem Box of Hafele make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Plain Sink Unit (700mm H x 600mm W x 560mm D )

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Sink Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 600 mm W x 700 mm H x 560 mm D. Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter(s) attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Sub Head: Interio Galvanised Steel Modular kitchen : Wall units (Type-IVB)

Top Self Unit ( 700mm H x 300mm/600mm/900mm W x 330mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge. The Top Shelf Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade& 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of Variable size : 300mm/500mm/600mm/800mm/900mm W x 330 mm D x 700 mm H . Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel ( wooden texture ) fixed to the cabinet using Soft closing Hettich make hinges. Openable Shutters to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will consist of shelves that shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirement. The unit shall be fixed to the wall using metal screws of appropriate size and rawl plugs.

Galvanised Steel Modular Kitchen -(Type-IVB) - (3150X3350)

Sub Head: Galvanised Steel Modular kitchen - Base cabinets (Type-IVB)

Plain Shelf Unit (700mm H x 900mm /800 mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Shelf Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 900 mm/800mm W x 700 mm H x 560mm D. Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter(s) attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Thali Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Thali Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade with cutlery tray provision & plate stacking provision in wire basket ( 100mmH + 100mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Utensil Unit (700mm H x 600mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Utensil Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 600mm W x 700mm H x 560mm D. Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 304 SS Grade plain wire baskets( 150mmH +150mm H) and fittings required SS screw for fixing above quadro slide of Hettich make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Bottle Pullout Unit (700mm H x 200mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Bottle Pullout Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall size 300mm/200mm W x 700 mm H x 560mm D . Pullout facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Pullout Facia to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Pullout Facia attached to the cabinet with 500 mm CED coated full ext. ball slides ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Gas Cylinder Unit (700mm H x 450mm W x 560mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Gas Cylinder Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 450 mm W x 700 mm H x 560mm D. Openable Shutter shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Tandem Box Drawer Unit (700mm x 500mm W x 560mm D)

Providing, Supplying and installation of Factory made modular kitchen cabinets as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Tandem Box Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall s Variable sizes : 500mm W x 700mm H x 560mm D Drawer Facia shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Drawer Facia to have an approved quality of die cast Arc 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of 2 Big unit of Size ( 150mmH +150mm H) and fittings required SS screw for fixing above Tandem Box of Hafele make. The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs .

Plain Sink Unit (700mm H x 600mm W x 560mm D )

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge.The Plain Sink Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall Variable Sizes : 600 mm W x 700 mm H x 560 mm D. Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel. Each Openable Shutter to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will be consisting of Openable Shutter(s) attached to the cabinet with a pair of soft closing hinges ( Hettich make ). The carcase of floor units will be supported by optional 100mm H vertical ajustable legs upto 20 mm (Hettich or equivalent approved) which will be covered with optional PVC skirting (Rehau or equivalent make ) in brushed aluminium finish attached by hardware of skirting .The unit shall be fixed to the floor using metal screws of appropriate size and rawl plugs.

Sub Head: Interio Galvanised Steel Modular Kitchen : Wall units (Type-IVB)

Top Self Unit ( 700mm H x 500mm/800mm W x 330mm D)

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge. The Top Shelf Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade& 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of Variable size : 500mm/800mm x 330 mm D x 700 mm H . Openable Shutters shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel ( wooden texture ) fixed to the cabinet using Soft closing Hettich make hinges. Openable Shutters to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will consist of shelves that shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirement. The unit shall be fixed to the wall using metal screws of appropriate size and rawl plugs.

Gas liftup Top Unit ( 700mm H x 600mm W x 330mm D )

Providing, Supplying and installation of factory made modular kitchen cabinets, as per approved drawing and design/ specification of Architect and Engineer In-Charge. The Gas liftup Top Unit Cabinet will be made of 0.7mm body panels as per GP Grade - D2014 IS277 and 50 micron film thickness with scratch hardness in HB grade& 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653) of overall size 600mm W x 330mm D x 700 mm H . Openable Shutter shall be made of Corner Formed Epoxy Polyester Powder Coated Galvanized Mild CR steel ( wooden texture ) fixed to the cabinet using Soft closing Hettich make hinges & Blum Liftup Hardware Openable Shutters to have an approved quality of die cast Pitch 128 mm handle made of zinc alloy. The unit construction will be using common frame open structure with Optional Back and Side Panels. The cabinet will consist of shelves that shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirement. The unit shall be fixed to the wall using metal screws of appropriate size and rawl plugs.

Sub Head: Hood

Supply , Installation , testing and commissioning of chimney having power 440 watt , Single motor 2-3 noise level 52db, suction power 1016 m3 / hr illumination 2x20 watt outlet die 150 mm technology with Baffle Filter technology suitable for peration in220 V single phase 50 HZ AC supply

Sub Head: Hob

Supply, Installation , testing and commissioning of Hobs having two Rapid Burner and one Work Burner with maximum power output – anything from 3 to 6 kW).