Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-Finance | ₹6.2 L | L1 | Accepted-Finance Accepted due to lowest bid price and contract awarded |
| 2 | L2₹6.2 LRejected-Finance | ₹6.2 L | L2 | Rejected-Finance Rejected due to 2nd lowest bid price |
| Sl No | Description | Qty | Unit | M/s J.P. Enterprises L2 | LAKSHITA ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling cement concrete or granolithic floors including base concrete and including stacking of dismantled materials as directed by thr engineer-in-charge with in a distance of 60 metre (200feet)
S.I.No. 697 | 91.1 | M2 | 65 ₹5,921.50 | 63 ₹5,739.30 |
| 2.00 | Providing and fixing 25 mm thick shutters for cup board etc. :Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. D.S.R, 14.26.1.1 | 57.6 | M2 | 4,176 ₹2.4 L | 4,133 ₹2.4 L |
| 3.00 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture D.S.R. 8.28.1 | 57.6 | M2 | 1,585 ₹91,296 | 1,568 ₹90,316.80 |
| 4.00 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.
3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)D.S.R.=13.116 | 115.2 | M2 | 2,484 ₹2.9 L | 2,458 ₹2.8 L |
Tender Value
₹7.4 L
EMD Value
₹73,600
Closing Date
25 Feb 2026, 5:00 pmClosed
EO NPP Dadri
Executive Officer Nagar Palika Parishad Dadri, District Gautam Buddha Nagar UP -203207
Woodwork in the board meeting room and inquiry room located in the Nagar Palika Parishad Dadri Office.
2026_DOLBU_1117557_1
2072/N.P.P.D./E.N.S./2025-26 Dt 17.02.2026
Open Tender
Miscellaneous Works
30 days
NPP Dadri
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,440
Nagar Palika Parishad Dadri Dist. Gautam Buddha Na
₹73,600
20 Mar 2026
18 Feb 2026
26 Feb 2026
18 Feb 2026
25 Feb 2026
18 Feb 2026
Dismantling cement concrete or granolithic floors including base concrete and including stacking of dismantled materials as directed by thr engineer-in-charge with in a distance of 60 metre (200feet) S.I.No. 697
Providing and fixing 25 mm thick shutters for cup board etc. :Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. D.S.R, 14.26.1.1
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture D.S.R. 8.28.1
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)D.S.R.=13.116
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
TC.pdf
Tender Documents • 0.98 MB
BOQ_2076558.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid