Fabrication with installation of Display board, radium sign boards nd wall painting for writing of SOP at different area of Handidhua Colliery, Talcher Area

Amount

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Fixing of plain radium sheet of any desired colour pre-prepared surface of sign board as per required size and shape including all charges and as per instruction of EIC (Measurement to be taken in square and reactangular shape) (Area 1.20X1.20=1.44 Sq.mm)

Providing of computerised radium letter stickering using the sticker plotter of desired color on prepared surface of sign board as per required size and shape incl. all charges and as per instruction of EIC

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.; All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

M.S. Board 08 nos (03 nos Un authorised Entry board+05 nos SOP board)

Supply of M S Plate of 3mm thickness

Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Lettering with black Japan paint of approved brand and manufacture

MAKING OF MS FRAME AND PRINTING OF SOP AS REQUIRED (03 NOS)

Fabrication of steel structure work with bolted or welded in built up section, trausses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Hollow section pipe frame- 50*50*1.5 size)

Printing of flex of (size=6x4 feet )

Wall painting and writing of SOP & COPs as per the requirement

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping. sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : new work (two or more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm)

Lettering with black Japan paint of approved brand and manufacture

Total impact of GST for the purpose of CTC

SAROJ KUMAR SAHOO

Bimala Enterprises

SATYABRATA PRADHAN