Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹31.7 L+₹3.2 L (11.2%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹31.9 L+₹3.4 L (12.0%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹32.6 L+₹4.1 L (14.3%)Rejected-Finance | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹33.5 L+₹5 L (17.5%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar pin 143001
CERTAIN REPAIR TO MARRIED ACCN JCO ORs FAFA , JOGINDER SINGH ,SOMNATH ENCLAVE , HOSHIYAR SINGH ENCLAVE , INF AREA, THIMAYA ROAD ETC UNDER AGE BR-II AT GE AMRITSAR CANTT
2023_MES_606106_1
GE/ASR-31/2023-24
Open Tender
Civil Works
Works
180 days
GE Amritsar
Class D category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹90,000
28 Oct 2024
27 Jun 2023
26 Jul 2023
27 Jun 2023
25 Jul 2023
12 Jul 2023
Amount
Taking down cement plaster on brick or stone or concrete surfaces of wall etc ,icluding raking out joints , hacking for key, scrubbing down with water etc.; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 10 mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) finished the surface for even and smooth without using extra cement.; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Rendering 5mm thick in CM 1:3 to fair face of brick works or concrete surfaces of ceiling finished the surface for even and smooth without using extra cement.; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preparation of new plastering surfaces of walls and applying two coat of cement base paint over a coat of primer etc ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for two coat of oil bound distemper over a coat of primer on newly plastered surface of wall incl preparation of surface ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Three coats of white washing on new plastered surfaces of ceiling , chajjas after preparation of surfaces; Complete all as specified and as directed by Engineer-in-charge.
Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) as in boundary wall, drain etc ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Brickwork but except bricks Note:- Serviceable bricks obtained from dismantling of brick work shall be reused built in CM (1:6) as in boundary wall, drain etc ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc; Complete all as specified and as directed by Engineer-in-charge.
Demolition of Reinfoced cement concrete for roofs, floors,(other than ground floors) beams , stair cases, landing,chajjaa and similar suspended work ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for RCC with type B0 (1:2:4) (using 12.50mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and cover slab in shelves and the like ; Complete all as specified and as directed by Engineer-in-charge.
Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for TMT bars 6 to 8 mm mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs 15mm bib tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 90 gms/20 mm-92 gms) ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 15mm angle stop valve of PTMT with long shank and cup (concealed type) any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-110gms/20mm-112 gms) ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 100mm swivel type shower rose of PTMT with shower arm15 mm size, 195 mm long of any colour for fixing with 15 mm pipe ( min weight 40 gms ) ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 15mm Pillar taps,of PTMT any colour fancy type high pressure scewed for iron pipe and fixed ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for Vitreous China wash basin, white, flat back, size 550 X 400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete as in repairs ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe)including connection to trap, and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs plastic water closet seat, white , closed patern withflat bottom and cover and mild steel chromium plated or aluminium hinging device ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in rapair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs PVC waste pipe 32/38/40 mm dia, 600 to 750 mm long ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs stainless steel plate rack of size 1m x 1m, with folded edge gloss finish fixed to wall ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable rubbish off the premises all as directed.
Material and Labour roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with cement @ 3.0 Kg/Sqm ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 15mm thick Screed bed or beading layer of cement mortar (1:6) for laying floor finishes ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 10mm thick Screed bed or beading layer of cement mortar (1:4) for vertical surfaces like dado, skirting etc. ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting. etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Glazed ceramic colour tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing dark/light shade vitrified ceramic tiles 10mm thick (square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm as in floor set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing dark/light shade vitrified ceramic tiles 10mm thick (square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for kota stone slab 20-25mm thick in flooring laid over 20 mm thick cement screed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including poilshing ; Complete all as specified and as directed by Engineer-in-charge.
Sand filling under floors or in foundations including watering and consolidation ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade ; Complete all as specified and as directed by Engineer-in-charge.
Taking up or down steel tubing and connections for 15mm bore of pipe ; Complete all as specified and as directed by Engineer-in-charge.
Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) ; Complete all as specified and as directed by Engineer-in-charge.
Taking up or down steel tubing and connections for 20mm bore of pipe ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for 20 mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) ; Complete all as specified and as directed by Engineer-in-charge.
Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with manhole cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection including dismantling / taking down old PVC water tank, ball valve etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing rotational moulded polythelene water storage tanks tripple layer( white colour) of capacity 1000 litres with and including 20mm dia float valve with brass fittings hoisted, fixed in position and making connection including dismantling of existing unserviceable tank ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs 20 mm Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms) ; Complete all as specified and as directed by Engineer-in-charge.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) nxc 1.50 sqm each ; Complete all as specified and as directed by Engineer-in-charge.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each all as specified and directed. (as in doors); Complete all as specified and as directed by Engineer-in-charge.
Taking down shutters of any description exc 1 Sqm but nexc 2 Sqm each; Complete all as specified and as directed by Engineer-in-charge.
Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each.; Complete all as specified and as directed by Engineer-in-charge.; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing factory made PVC Internal door frame of size 100 mm x 45 mm with a wall thickness of 5 mm (+0.25) , made out of extruded 5 mm (+0.25) thick PVC sheet manufactured by asn ISO - 9001-2008 certified company, and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90 x 30mm shall be made from plain colour PVC sheet of 5 mm (+0.25) thickness. The inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from 5 mm (+0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and oined with 4 Nos of 150 mm long brackets of 15 mm x 15 mm square tube . The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 guage through out the frame . The door frame whslla be fixed to the wall using 8/100 mm long MS Screws through thee frame by using anchor fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc as per manufacturer's specification, ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Providing 30mm thick " FACTORY MADE DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottoMaterial and Labourock rail. M.S frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / eynoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel, 5mm (+0.25) plain/prelam PVC sheet to be pasted using solvent cement / cynoacrylate adensive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (Made by sticking 02 Nos. foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain / prelam mouded PVC sheet of door. 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel but hinges of size 100mm *25mm*2mm and 50mm longsteel screws drilled suitable to pass through both the walls of M.S tube. other hardwares should be fixed with 25mm*8mm size steel screws etc, complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.
Material and Labour for 30 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and as directed by Engineer-in-charge.. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- MS guard bars, sheet glass wire mesh and painting shall be measured and paid sperately
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and as directed by Engineer-in-charge. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately.
Supply and Fixing 35 mm thick flush shutter, soild core construction, with block board core and plywood face panel commercial type on both sides; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing IInd class hard wood plain framed, panelled shutter 35 mm thick (any number of panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing framed work such as grill, framed guard bar and similer work conforming to FE 290, GDE E- 165 ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified.
Supply and fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples ; Complete all as specified and as directed by Engineer-in-charge.
Hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 3mm thich figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 150 mm aluminum , anodised, barrel tower bolts of extruded section ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 150 mm aluminum Handle Cast type ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 250mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing M.S. 300mm ordinary rat tail rod pattern spring including roller and roller plate complete including necessary welding to door frame ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for cup board shutter, frame made of angle iron 35x35x6mm, covered with 1.00mm thick MS sheet, welded to frame including suitable handle, lugs and locking arrangement ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing PVC sheet 5mm thick, in backside of kitchen cabinets for support ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing PVC board 18mm thick, in cupboard shelves and backside (for hanging) kitchen cabinet etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing solid PVC shutter 18mm thick with one side prelam of any shade plain colour as in cup board, kitchen cabinet shutter etc.; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 40mm long box type steel hinges spring action type ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 75-80mm long stainless steel handle ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for providing PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) for fixing of hold fast ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour precoated chequered cement concrete tile of size 300 x300x25mm thick over and including 15mm thick cement screed in CM 1:6 set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of tiles ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in 50 mm thick plinths protection and as in path and floor ; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs 25 mm Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc. ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs 110 mm bore PVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing PVC (SWR) bend 110 mm size ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 110 mm bore PVC (SWR) single Tee ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse ; Complete all as specified and as directed by Engineer-in-charge.
Demoliton of mud in roof any thickness including mud plastering and removing to distance exc 250m but n exc 500m ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for brick tiles but except brick tiles( Note:-Old serviceable tiles shall be reused. ), laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) averaging 50 mm thick as in roof padding mixed with WPC @ 100ml per 50 Kg cement finishing the surface even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge. Note : WPC shall be measured and paid separately under relevant item of Sch 'A').
Material and Labour for 15mm thick plaster in CM (1:3) on RCC roof surfaces as in vertical surfaces mixed with water proofing liquid compound finished the surface even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge. (Note : WPC shall be mixed @ 100 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid seperately.
Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed by Engineer-in-charge.
Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces ; Complete all as specified and as directed by Engineer-in-charge.
Supply only water proofing compound liquid type (ISI Marked) ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sides of sunken slab benching etc including necessary form work ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Rendering 15mm thick cement plaster as in sunken portion in cement mortar 1:3 using water proofing compound, finished fair and even without using extra cement ; Complete all as specified and as directed by Engineer-in-charge.. (WPC measured saperatly)
Supply and Fixing 40mm bore steel water tubing grade galvanised inserted at the end of lateral slope projecting atleast 25cm beyond the outermost part of the building below the drain pipe up to two storey construction as spout for sunken, and all joints should be sealed properly by epoxy sealent ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Water proofing treatment to sunken floor including wall comprising with the following course of treatment/ specification from bottom to top. (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surface of floor for treating the sunken floor all as specified & as directed by Engr-in-Charge. (b) Apply a coat of hot bitumen 85/25 penetration grade bitumen @ 1.20 kgs/Sqm. (c) One layer of 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire area, ; Complete all as specified and as directed by Engineer-in-charge. Note:-(i) After plastering testing tobe carried out by ponding (For 48 Hrs) and any leakage/Seepage observed shall be rectified before water proofing treatment. (ii) Laying of APP membrane shall be done as per manufracturers instructions . (iii) Joints tobe touched hot and Minimum width of overlaps not less than 150mm.
Material and Labour for Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete or in sub base of floors ; Complete all as specified and as directed by Engineer-in-charge.
Raking out joints/pointing to brick work or brick tiles, 30cmX15 cm laid flat, in floor , surface channels, roofs etc ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for flush pointing to brick 30cmX15 cm laid flat, brick on edges or brick tiles in paving in cement mortar 1:3 ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for 15 mm Bib taps, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed in repairs, including extra CP nipple wherever required ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 15mm dia Stop valves, , high pressure, with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for unions,including extra CP nipple wherever required. ; Complete all as specified and as directed by Engineer-in-charge.
Excavating in post holes in soft/loose soil each not exc. 0.50 cum and getting out , returining filling and ramming earth or broken rubble mixed in layer not exc 25 cm ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in foudation Filiing Etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing rolled mild steel sections ( angles, tees etc ) as in post fixed with angle cleats, MS plate etc including necessary welding etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing MS work ( MS angle ) as in roof truss (framed), purlins, rafters including distance pieces, cleats etc including necessary cutting, welding etc Fe-410 w gde E-250 quallity A.; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for pre-painted galvalume aluiminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 75 mm thick PCC ( 1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base complete ; Complete all as specified and as directed by Engineer-in-charge.
GEE EMM ASSOCIATES
Munish Kalia
ESS KAY BUILDER
PURI ENGINEERS
amardeep traders
Saini Constructions
m/s. gopal krishan
RAJ KAMAL BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .