SPECIAL REPAIR/REPLACEMENT OF OH LINE TO UG CABLE IN OFFICERS ENCLAVE ALONGWITH PANELS (PHASE-III) AT 25 ED AF, DEOLALI.

Amount

Dismantling & taking down old existing DB / Meter panel from existing position complete all as directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in hard/dense soil all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick by using excavated soil all as specified and directed.

Removing of surplus soil not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 mitre above the starting point all as specified and directed.

Supply and laying double wall corrugated (DWC) duct (dure guard) of size 38mm inner dia and 50mm outer dia as per IS 14930 part II as in LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report all as specified and directed Make: Dura-line/ Gemini/ Rex

All as per Srl item No. 06 here-in-before but size 50mm inner dia and 63mm outer dia.

All as per Srl item No. 06 here-in-before but size 95mm inner dia and 110mm outer dia.

All as per Srl item No. 06 here-in-before but size 103.5mm inner dia and 120mm outer dia.

Supply and laying in trenches or passing through pipe, fixed to pole or as indicated at site, commissioning and testing LT XLPE UG (heavy duty) insulated, screened, PVC bedded, galvanised steel strip or wire armoured with multi-stranded aluminium conductor cable,1100 volts grade of cross sectional area 3.5 core 120 Sqmm including necessary connection with provision of lugs & cable gland fixing arrangements etc complete all as specified and directed.

All as per Srl item No. 10 here-in-before but cross sectional area of cable 3.5 core 95 Sqmm.

All as per Srl item No. 10 here-in-before but cross sectional area of cable 3.5 core 70 Sqmm.

All as per Srl item No. 10 here-in-before but cross sectional area of cable 3.5 core 35 Sqmm.

All as per Srl item No. 10 here-in-before but cross sectional area of cable 4 core 25 Sqmm.

All as per Srl item No. 10 here-in-before but cross sectional area of cable 4 core 16 Sqmm.

Supply, install, testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT meter panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT meter panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT meter panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Supply, install, testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of steel sheet 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, provided with 6mm thick bakelite/fibre sheet for mounting electrical accessories, provision for fixing electric meters, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40mmx40mmx5 mm size angle iron frame anti rust painted of height 0.6 Mitre above ground level and 0.6 Mitre below ground level totally enclosed and completly weather, dust & vermin proof and clearence from ground level for the entry and exit of cable, provision of ventilation on sides and provn of cable lugs for connection etc. including provision of PCC Foundation 1:2:4 type B2 using 40mm graded stone aggregate including necessary eartwork & excavation etc and complete all as directed including with the following accessories confirming to IP 54 protection class :-

Material and labour for earthing complete with galavanized steel earth electrode, 60mm x 60mm x 6.00 mm thick, buried directly in ground (earth pit not less than 1.5 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized earth strip of size 32mm x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 connected to earthing test point upto main switch DBs and LT panel all as directed including testing on completion including PCC pit type C-1 (1:3:6) using 20 mm graded stone aggregate & 40 mm thick precast RCC cover in (1:2:4) type B-0 using 12.5 mm graded stone aggregate, reinforced with 8 mm dia TMT bar @ 75 c/c both ways with 02 Nos lifting handles of 12 mm dia MS plain bar, GI pipe 20mm dia medium grade with funnels & wire mesh for watering and 50 mm dia light grade GI pipe for earth strip protection etc including necessary earth work and excavation complete all as specified and directed. Note: GI earth strip & protection pipe beyond 7.5 meters length will be measured separtely under relavent item.

Material and labour for earthing complete with galavanized steel earth electrode, 60mm x 60mm x 6.00 mm thick, buried directly in ground (earth pit not less than 1.5 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to 4mm dia GI wire through GI pipe light grade 15 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 connected to earthing test point upto main switch DBs and LT panel all as directed including testing on completion including PCC pit type C-1 (1:3:6) using 20 mm graded stone aggregate & 40 mm thick precast RCC cover in (1:2:4) type B-0 using 12.5 mm graded stone aggregate, reinforced with 8 mm dia TMT bar @ 75 c/c both ways with 02 Nos lifting handles of 12 mm dia MS plain bar, GI pipe 20mm dia medium grade with funnels & wire mesh for watering and 15 mm dia light grade GI pipe for earth strip protection etc including necessary earth work and excavation complete all as specified and directed.

Supply and laying GI tubing 80mm bore dia of pipe, light grade galvanised with all fittings & accessories in trenches, fixing pole/wall, as in protection of cable etc with MS clamps, nut, bolt & washers etc complete all as specified and directed.

All as per Srl item No. 28 here-in-before but 40mm bore dia of pipe

Material and labour for Cable route indicator fabricated from 40mm x 40mm x 6mm angle iron 450mm long, rivited or welded with 100mm dia CI or MS round disc duly engraved " LT cable" in letters including grouted in ground with PCC 1:4:8 type D-2 compete all as specified and directed

Material and labour for jointing & testing heat shrinkable cable straight through joint kit, out door type for 1100 volts LT XLPE/PVC insulated cable of cross sectional area 16sqmm to 50 sqmm 3.5/4 core cable including necessary jointing work all as specified & directed

Material and labour for jointing & testing heat shrinkable cable straight through joint kit, out door type for 1100 volts LT XLPE/PVC insulated cable of cross sectional area 50sqmm to 120sqmm 3.5 core cable including necessary jointing work all as specified & directed

Supply and laid in ground/floor/hard standing or fixed on wall Galvanised iron strip 32mm x 6 mm as earth continuity conductor, including provision of necessary sadling/ mounting, nuts, bolts and washers complete all as directed.

Note : The amount against Schedule of Credit on Page No. 35 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

M/S S T KUNDARIYA

sapana enterprises

shubham Enterprises

SHRI SULAI ELECTRICALS

Paras Electricals