CONSTRUCTION OF ADDITIONAL CLASS ROOM WITH HIGH AND LOW BENCHES

Amount

Earth work in excavation of foundation trenches or drain in all sorts of soil(including mixed soil but excluding laterite and sand stone)including removing,spreading or stacking the spolls within a lead of 75m as directed.The item includes necessary trimming the sides of trenches,levelling,dressing and ramming the bottom,balling out water as required complete.

Earth work in filling in foundation trenches or plinth with good earth. Layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(Payment to be made on the basis of measurement of finished quantity of work)

Filling in foundation or Plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by through saturation with water,ramming complete including the cost of supply of sand.(Payment to be made on measurement of finished quality)

Single brick flat soaling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Cement concrete with graded jhama khoa (30 mm) excluding shuttering (proportion of mixture-1:3:6) in ground floor and foundation.

Supplying and laying Polythene sheet (150 gm/Sq.m) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Welding in M.S structural work with gas or electrick a) Tack Weld

Ordinary cement concrete (mix 1:1.5:3) with graded stonechips(20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders, etc, including distribution bars, initial straightening & removal of loose rust (if necessary) cutting to requisite length hooking and bending to correct shape ,placing in proper position and binding with 16 gauge black anneled wire at every intersection complete as per drawing and direction.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stoup props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams and columns,lintels curved or straight including fitting,fixing and striking out after completion of works(Upto roof of ground floor)

First Class brick work in cement morter(1:6) In Foundation:-(Below Tie Beam)

a) Do In superstructure, Ground Floor

125 mm thick brickwork with 1st class bricks in cement morter (1:4) in ground floor

String course up to 75 mm projection and up to 150 mm depth 15 mm thick plastered(1:4)(including stripping off old surface where necessary) complete.(Cement 6.6kg/mtr.)

Labour for chipping of concrete surface before taking up plastering work.

Supplying,fitting and fixing fan hook for ceilling with 1 metre long 16 mm dia rod complete including mending damages.Payment for damage and repair to be made seperately.

Plaster(to wall,floor,ceilling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints including throating,nosing and drip course,scaffolding/staging where necessary(Ground floor).[Excluding cost of chipping over concrete surface] 20 mm thick inside plaster:-

15 mm thick inside plaster:-

10mm thick outside plaster:-

Artificial stone in floor, dados, staircase etc. with cement concrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off cement and including application of cement slurry before flooring works using cement @ 1.75 kg./sqm. all complete including all materials and labour. 35 mm Thick at gr. floor. including 3mm Topping complete in all respect

Neat cement punning about 1.5 mm thick in wall,dado,window,sills,floor, drain etc.Vide Page no-192/15

Wood work in door and windows frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete,Iron Butt hinges and M.S clamps.(The quantam should be correted upto three decimals)

Panel shutters of door and window, as per design(each panel consisting of single plank without joint),including fitting and fixing the same in position but excluding the cost of hinge and other fittings in ground floor. 35 mm thick shutters with 19 mm thick panel of size 30 to 45 cm. Bhola wood.

Two coats acrylic distemper to interior wall,ceilling with a coat of solvent based interior grade acrylic primer(as per manufacturar's specification) including cleaning and smoothing of surface.

Applying decorative cement based paint of approved quality after preparing the surface including scrapping the same thoroughly (Plastered or concrete surface) as per manufacturer's specification.

Priming one coat on timber surface with Synthetic oil bound primer of approved Quality including smoothing surfaces by sand Papering etc.

Priming one coat on steel or metalsurface with Synthetic oil bound primer of approved Quality including smoothing surfaces by sand Papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothing surface by sand papering etc. including using of approved putty etc. on the surface,if necessary:-

Painting black board with approved paint after scraping and polishing surface etc.

M.S or W.I ornamental grill of approved design joints continuously welded with M.S,W.I.Flats and bars of windows,railing etc. f itted and fixed with necessary screws and lugs in ground floor. Grill weighing above 16 kg/sq.mtr and above

Supplying fitting and fixing M.S clamps for door and window frame made of flat bent bar,end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. 100mmx58mmx1.90mm

Iron But hinge of approved quality fitted and fixed with steel screw with ISI mark 100mm x 58mm x 1.90mm

IronSocket bolt of approved quality fitted and fixed 150mm long and 10 mm dia

IronSocket bolt of approved quality fitted and fixed 300 mm long and 10 mm dia

Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed complete with steel screws. 125mmx125mmx27mmx2.5 mm

Iron hasp bolt of approved quality fitted and fixed complete(oxidised) with 16 mm dia rod with centre bolt and round fitting. 6 mm dia x 225 mm long

Iron catch hookt of approved quality fitted and fixed complete(oxidised) with 16 mm dia rod with centre bolt and round fitting. 6 mm dia x 225 mm long

Supplying fitting and fixing hinge cleat in position excluding the cost of hinge and other fittings. With 50mm Iron Butt-Hinge:-

Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement morter mending damages to wall and plaster and two coats of paint of approved brand sand shade.Payment of mending two damages of wall and plaster and painting to be made separately. RCC ventilator

Supplying fitting and fixing UPVC pipes A-Type with all necessary clamps,nails,including making holes in walls,floor etc.cutting trenches in any soil through masonary concrete structures etc.if neccssary and mending good damages including joining with jointing materials(Spun yam,valamoid/Bitumen/M-Seal etc.) complete. A) UPVC Pipes-75 mm dia

a) Plain Tee-75 mm dia

b) Plain Y-75 mm dia

c) Bend 87.5 Degree-75 mm dia

d) Shoe-75 mm dia

Construction of Ramp with handrails including necessary first class brick work 250 mm thick on the both side, earth filling , brick flat soling, 35 mm thick Artificial stone flooring with 3mm thick topping and 125 mm thick brick work on two sides for hand rail including plastering complete size of the Ramp 2.0 mtr x 1.20 mtr size may vary as per requirement

Supplying wooden High & Low benches sets both joined with eache other made of Sal Wood frame and Top made of Gamahari/ Holock or simmilar type of seasoned timber including book self covered three sides including Painting/Polishing compete in all respect. size of the benches- L= 1.80 mtr(7'00") , B= 300mm (1'00") H= (for high Benches) 725 mm(30") & Low Benches H= 425mm (17") Legs 50mm x 50 mm, Link- 75mm x 25mm , Top- 300mm x 25mm x 2.10mtr , Book self- 300mm x 12mm x 2.10mtr , Foot Rest 50mm x 37.5mm

N S ENTERPRISE

RAKHI TRADERS