ADDITION/ ALTERATION/ IMPROVEMENT TO

Amount

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M & L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tiles exc. 0.18sqm but not exc. 0.38 sqm in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including 15mm thick screed bed or bedding layer of in CM 1:6 all as specified and as directed by Engr-in-charge.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thick screed bed or bedding layer of in CM 1:6 etc all as specified and as directed.

All as per Item No.3 above but as in skirting including 10mm thick in CM (1:4) as in backing coat for fixing wall tiles complete all as specified and as directed.

M & L for Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying staircase tile all as specified and as directed.

M&L for coloured Chequered cement concrete tiles bullnosed Size 32cm x 20cm x 30mm thick set in cement mortar with white cement and pigments. jointed and pointed in neat cement slurry as in treads all as specified and as directed.

All as per item No.6 above but on vertical surfaces as in skirtings, dados and risers of steps 10 mm thick in rendering CM (1:4) as in backing coat for fixing wall tiles complete all as specified and as directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed or bedding layer in CM 1:6 all as specified and as directed.

M & L for Granite (of any type) tiles 18 mm to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in vertical surfaces including 10 mm thick in CM (1:4) as in backing coat for fixing wall tiles complete and as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thick (above or below the ground level) all as specified and as directed.

M&L for Cement concrete 1:2:4, type B1 using 20mm graded stone aggregate, 25 mm thick in floor all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed .

M&L for rendeirng 10 mm thick as backing coat in CM 1:4 for fixing of wall tiles etc complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS - 15658-2006 of 80mm thickness , M-30 Grade with grey cement and pigment etc all as specified and as directed .

M&L for M sand cushioning under floors or in foundations including watering and consolidation for laying of interlocking pavour block all as specified and as directed.

M & L for Precast cement concrete block masonry type C1, 1:3:6 (20mm graded stone aggregate ) solid blocks,n exc 10cm in width (with plain or interlocking joints as directed ) and setting in in cement mortar 1:4 as in edge of paver block etc all as specified and as directed.

Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams and similar works including provison of supports if required and dubbing with PCC (1 : 1.5 : 3) using 6 to 12 mm graded stone aggregate in any portion of 15mm to 50mm thick and finish incl necessary scoffolding and temporary shuttering to edges and finishing with cement mortar 1:2 inclusive of water proofing compound all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position all as specified and as directed.

M&L Providing Precast cement concrete type B-1, 1:2:4 using 20 mm graded stone aggreagte as in specified in Chajjas including formwork set in CM 1:4 all as specified and directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips compound all as specified and as directed.

Removing building material out side the campus including loading and unloading, etc to out side the M.D land (Ministry of Defence land) all as specified of up to 5.00 Km total distance. Note : Location and permission of depositing the building materials/disposal out side the M.D. land shall rest with contractor at his own arrangement all as specified and as directed.

M&L for Sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink additive using 40 PSI pump complete and applying two coats of brush bond acrylic polymer modified cement based coating thickeness 1mm or two coats of pidifin 2K acrylic polymer water proof coating including necessary surface preparation, providing 20 mm thick water proofing screed bed/plaster in CM 1:4 mixed with conplast X42IIC @ 100 ml or Pidiproof LW @ 200 ml per bag cement. Two coats of Nitro Proof 100 bitumen based water proofing coating over plastered surface complete as per specification of chemical resistant coating complete all as directed by Engineer-in-Charge. Note : The work shall be executed through authorized applicator of M/S Fosroc / M/S Pidilite using the materials supplied by M/S Fosroc chemicals (India) Pvt Ltd or M/S Pedilite Industrials Ltd and In accordance with their repective manufacture's instructions.

M&L for cement concrete 1:7:12 using brick aggregate of size 40 to 60mm as in sunken portion all as directed.

S&F in repairs brass chromium plated shower rose 200 mm x 200 mm ABS body chrome plated with gray face plate with rubit cleaning system and shower arm fancy type .Make : Jaquar Model No:OHS 35497 ( Shower), SHA 455L400 ( Shower Arm) or equivalent in Leader, Zoloto , Seico, Marc all as specified and as directed.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in ceiling finishing the surface even and smooth without using extra cement all as specified and as directed.

M & L Rendering in CM 1:4, 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coat of OBD over one coat of primer all as specified.

M & L Preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bond distemper over one coat of primer all as specified.

M & L for preparation of old plastered surfaces and applying one coat of white wash on ceiling all as specified and as directed.

M&L Preparation of old plastered wall surface applying two coats of distemper oil emulsion over a coat of primer ( Chalk whitening ) with 3 mm thick wall care putty including priming surface and all as specified and directed.

M & L for complete removal existing treatment of wall surfaces all as specified and as directed .

Supply and fix PVC cabinet of size 600 x 450mm with shelves and hinged cover all as specified and as directed.Make : Parryware / Kohinoor/ Sintex

M & L for complete removal existing treatment of walls surfaces and applying two coats of cement based paint over a coat of chalk whitining primer all as specified and directed.(Height more than 3 Mtr upto 12 mtr)

Taking down chowkhats or frames (with out taking off the shutters from the frames) size exc 1.50 sqm and not exc 4.00 sqm each and all as specified and directed.

Taking down chowkhats or frames (with out taking off the shutters from the frames) size not exc 1.50 sqm each and all as specified and directed.

Taking down shutter of any description area exc 1.00 sqm but n.exc 2.00 sqm each complete all as specified.

Taking down shutter of any description, size not exceeding 1 Sq.m each all as specified and as directed.

Supply and fix Solid PVC door frames size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS squre tube, fixed to openings all as specified and directed

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain color PVC 'C' channel having aPVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side& as gap insert for top rail and bottom rail; Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specfication & drawing all as specified and directed

M & L for 12mm thick plywood, grade BWR type BB , fixed with timber frame as in rack/shelf etc all as specified and as directed.

M& L 2nd class hard wood plain fillets square/ rectangular in section clean swan secured with nails or brads sectional area exc 13 not exc 25 sqcm all as specified and as directed.

M&Lveneered decorative plywood 6 mm thick grade 1 (with BWR resin) with decorative face veneers on both faes fixed with screws to timber frame work all as specified and as directed.

M&L 12 mm thick Prelaminated particle board ,interior grade, pre-liminated one side with decorative choice lamination & other side balancing white laminnation,fixed with screw to timber frame work all as specified and as directed.

S & F Continuous (piano) hinges mild steel bright finish or electro galvanised, width of flaps (when open) in 30 mm all as specified and as directed.

S & F Continuous (piano) hinges mild steel bright finish or electro galvanised width of flaps (when open) in 40 mm all as specified and as directed.

S&F 40 mm dia cupboard knobs fixed with nut screw and washer of brass polished finished all as specified and as directed.

S&F of ball catches 8mm dia steel ball and brass body and striking plate including letting in and fixed.

M& L 2nd class hard wood plain fillets square/ rectangular in section clean swan secured with nails or brads sectional area exc 03 not exc 06 sqcm all as specified and as directed.

Demolation of brick or stone /boulder masonary,masonry walls built in cement mortar incl quoins and arches,piller,etc,but excluding ashlar facings,dressed stone work and precast concrete articles all as specified and as directed.

M&LBrick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6 with old size bricks all as specified and as directed.

M & L for Rendering in CM 1:6, 15 mm thick on fair faces of brick work or concrete surfaces all as specified and directed .

Dismantling of asbestos cement (Corrugated, semicorrugated etc) sheets in roof covering and all as specified and directed.

M & L for 0.50mm thick pre painted galvalum aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws aall as specified and as directed.

S&F sinks made of stainless steel , I mm thick kitchen or laboratory { with pIugs}" washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size410mmx330mmx160mm all as specified and as directed.

S&F of 1.5mtr long pully operated cloths drying system consisting consisting of chormiun plated pipe of outer dia 22mm, inner dia 19.80mm , pulleys made up of delrin with nylon rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable ) locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in kit. Rope will be HDPE double core of 4mm dia , fixing to ceilling as specified and directed and minumum weight of one pipe shall not be less than 0.20kg/m, minumum weight of rope shall not be less than 5500gms/unit ( for 06 pipes) Make : Easy dry or equivalent.

Supply and fixing of towel rail 20mm dia,"D" type and 600 mm long of Brass cromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified and as directed.

S&F Mild steel rat tail rod pattern springs of size 300mm including roller and roller plate fixing to iron frame by welding including cutting out old damaged/inactive helical door spring all as directed.

M & L for 2nd class hard wood plain,solid straight chowkats and frames, wrought, framed rebated on the solid ,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed.

M&L 35mm thick plain framed (Factory made) panelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm BWP commercial ply or 12mm thick vereered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and as directed.

M&L 30mm thick glazed and skeleton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc complete provided with stiles and rails as specified in SSR part-I section 8 clause 8.24 (b) all as specified and as directed.

S & F in repair steel windows or ventilators side hung shutters including projecting type hinges with steel handle and steel peg stay complete with galzing bars dovetailed or welded etc complete all as specified.

M & L for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 all as specified and as directed.

Preparing new surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed.

Preparing new surfaces of steel and steel based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed.

Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Preparing old surface of steel and steel based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel all as specified and as directed.

S & F 200 mm size aluminium anodised barrel tower bolts extruded section all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised all as specified and as directed.

S & F 300 mm long Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed.

S&F 150 mm helical door spring with roller and plate all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections all as specified and as directed.

Taking down unserviceable 75/ 100mm dia PVC (SWR) pipes fixed on walls complete all as specified and as directed.

Taking down old CI floor traps with waste pipes of length approximately 3.20 meter embedded in concrete and making good the disturbed portion with PCC 1:2:4 and S&F PVC floor trap only of size 75 mm all as specified and as directed.

M & L for 15mm bore, steel water tubing medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

M & L for 20mm bore steel water tubing medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed

S & F in repairs rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete all as specified and directed

S & F in repair stainless steel wall mounted plate rack of size 900x750x260mm of approved make including taking down old wooden plate rack complete all as specified and directed. Make : M/s Blue Star , Model No: BSKPR-311 or other equvalent make as approved by Engr -In-Charge

Supply & fixed in repair CP towel ring square type as per sample kept in GE’s office.Make Jaguar Continental code no-CAN-1121N all as specified and as directed.

Supply & fixed in repair CP soap DISH as per sample kept in GE’s office.Make L&K code no-SP-0777 all as specified and as directed.

S & F towel rail 600mm long of chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) all as specified and as directed. Make : Jaquar Model No: AKP- 3507 P or equivalent

S&F in repairs two way angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size all as specified and as directed. Make : CERA Model No: F3002212 or equivalent in Leader, Zoloto, Seico, Marc.

S&F in repairs concealed stop cock,with adjustable wall flange cast copper alloy,with screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size all as specified and as directed. Make : CERA Model No: F3002361 or equivalent in Leader, Zoloto, Seico, Marc.

3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 10) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of 16mm outer dia pipes all as specified and as directed.

3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 10) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of 20mm outer dia pipes all as specified and as directed.

S&F PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 110 mm bore all as specified and as directed.

S&F PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 75 mm bore all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm bore all as specified and as directed.

S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) all as specified and as directed.

M & L for flush pointing in CM 1:4 matching with tiles by using pigments including Raking out cement mortar joints/ pointing to brick tiles in floors,surface channels, roofs, etc including waterproofing liquid all as specified and as directed.

M&L for 25mm thick brick tiles matching with existing terrace tiles laid on cement mortar bedded in cement mortar (1:6) 15mm thick and joint grouted flush in cement mortar (1:3) except tiles all as specified and as directed.

M&L for removing old paint and polishing surfaces by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth on wood and steel surfaces all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning ,and preparing the surface including a coat of wood filler on new works with two or more coats all as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame all as specified and as directed.

S&F Sheet glass3 mm thick ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm each pane complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection laid in alterrnate panels and finish even and fair all as specified and as directed.

S& F in repairs viterous china wash hand basin white flat back size 630 x 450 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste fittings of 32 mm waste pipe etc all as specified and as directed.

Supply and fix in repairs low level PVC flushing cistern white complete with syphonic action type 10 litre capacity including float valve handle, bracket, PVC flush down pipe 32mm dia as required with bend, etc complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe), including fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed.

Supply and fix plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified and as directed.

S &F Glass Corner shelf size of 225 x 225 mm with bracket and all as specified Make : CERA Model No: F5005102 or equivalent in HIndware, CERA, Parryware, Hindustan Sanitaryware. .

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm all as specified and as directed.

S&F in repairs Bib taps, chromium plated with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore all as specified and as directed. Make : CERA Model No: F1015163 or equivalent in Leader,Jaquar, Zoloto, Seico, Marc

S&F in repairs angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size all as specified and as directed. Make : CERA Model No: F1015201 or equivalent in Leader, Zoloto, Seico, Marc.

S&F in repairs Pillar taps cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore all as specified and as directed. Make : CERA Model No: F1015101 or equivalent in Leader, Zoloto, Seico, Marc.

S&F in repairs brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe all as specified and as directed. Make : CERA Model No:F8030103 or equivalent in Jaquar ,Dolphin/Zoloto

S&F of toilet paper holder as in repairs brass chromium plated complete all as specified and as directed. Make jaquar Cat No- 1151 N

Flushing cistern pipe (exclusive of brackets) fixed in repair all as specified and as directed.

S & F in repairs fancy type curtain rails 20mm dia aluminium anodised chromium plated with fixing brackets, stops, rollers etc.including taking down existing curtain rod/ palmate box of any description and any position etc all as specified and directed.

S & F in repairs floor door stopper 150mm long with cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor all as specified and as directed.

M&L for Rendering 20mm thick in two layer of 10mm each on fair faces of concrete surfaces in CM 1:4 mixing with integral water proofing compound (WPC) finished even and smooth (without using extra cement) over cleaned, brushed by wire brush and washed by water etc complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

Supply only water proofing compound all as specified and as directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified and as directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 Iitres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

M&L for providing and injecting along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron etc complete.

M&L for providing and injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same.

M & L for powder coated aluminium(minimum thickness of powder coating 50 micron) frame for aluminium cabin/partitions /door & windows frame one or more rebates including joining cleats for fixing and fixing to floors with necessary acessories etc complete all as specified and as directed .

M & L for Powder coated ( thickness of poder coating not lessthan 50 microns) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

M & L for 12mm thick veneered particle boards exterior grade solid core,as in partition/general purpose type with face veneers of type "BB" with decorative vineers both side fixed aluminium beading with screw etc all as specified and as directed.

M & L for Sheet glass 5.50mm thick , ordinary quality and glazing with aluminium beading in square exc 0.5 sq.m in each pane including necessary joining cleats, glazing clips, rubber neoprene packing etc all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and 1.5m deep and getting out in hard/dense soil all as specified and as directed.

M & L for cement concrete in 1:2:4 type B2 (using 40mm graded agregate) as in foundation filling and mass concrete and similar work etc complete all as specified and as directed.

M&LBrick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:4 with old size bricks all as specified and as directed.

M&L for rendering 15mm thick, on fair faces of brick work or concrete surface in cement mortar 1:4 surface finished even & smooth without using extra cement all as specified & directed.

M/L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including necessary form work all as specified and as directed.

M/L for RCC 1:2:4, type B1 using 20mm graded stone aggregate as in precast cover slab set in CM 1:4 including necessary form work all as specified and as directed.

S&F for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M/L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in bed to drain pipe including packing under pipe and haunching against sides of pipe after they laid and tested for 150mm dia pipes all as specified and as directed.

All as per item No 134 herein above but for 200mm dia pipes

All as per item No 134 herein above but for 100mm dia pipes

Cutting into existing man holes for connecting new drain , making good to pipe and rendering, cutting out existing benching for and forming branch (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 15mm dia pipe all as specified and as directed.

Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm each in hard dense soil all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and as directed.

M/L extra for forming fair finishing to drain channel 30cm inner girth in cement concreting using extra cement including forms, mould mitred/stopped end etc all as specified and as directed.

M/L for 100mm dia glazed stone ware drain pipes ISI Marked laid in trenches and jointed all as specified and as directed. MAKE : TSL/TACEL

All as per item No 141 herein above but for 150mm dia pipes

All as per item No 141 herein above but for 200mm dia pipes

Cleaning of sewage line for removing the blockage by manually or technically all as directed and as specified for 150mm dia sewage line.

All as per item No 144 above but 200mm dia sewage line

Cleaning of manhole of any size and depth upto 1.5m by removing the sludge and night soil including opening and removing the cover slab and keeping in position after cleaning etc complete all as specified and as directed.

Cleaning of covered drain including removal of sludge by opening the cover slab and placing the same in position properly all as specified and as directed.

M & L for Cleaning of blockage from sewage lines of any diameter of pipes between manholes and removing the accumulated sludge from site and disposing away from domestic premises all as specified and as directed.

M & L for Removal of sludge and sediments in dry or wet stage from septic tank/sewage sump of any capacity and depth and getting out and removing to a distance away from the premise of defence land and disposed off all as directed by Engineer -in-Charge.

M & L for Removing of sewage water from septic tank/sewage sump through "septic tank cleaning lorries" having pumping arrangements and carrying the sewage water in tanks of the lorry, having 5000 litres capacity and disposal of the sewage water outside defence area as directed.

Taking down aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.

Taking down Ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only ceiling fan and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.

M& L painting of ceiling fans complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only exhaust fan and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.

Disconnecting electric connection and taking down DBs, SPN/TPN of any size and making good/levelling the disturbed surfaces of wall by using cement mortar all as specified and as directed.

M& L painting of exhaust fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

M&L for concealed/surface Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls/ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor, all as specified and as directed for One light point controlled by one, one way switch.

All as per item No 160 but for One ceilin fan/exhaust fan point controlled by one, one way switch

All as per item No 160 but for One switch socket outlet point 5 Amps on independent board.

All as per item No 160 but for One switch socket outlet point 5 Amps on same board.

All as per item No 160 but for One light controlled by 2 way switches, with cable 1.5 sqmm.

All as per item No 160 but for One call bell point controlled by one push button on the same board

All as per item No.160 described here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board all as specified and as directed

Supply & fix TARA-M/20W , LED tube light fitting 1x20 Watt MS white powder coated decorative LED T8 batten with PC tube complete all as specified and as directed Make: C&S Cat No. LTDC0161820WLED + LT4F20WLEDT8/WD or equivelent in Havells, Philips.

Supply & fix LED focus light 7 watt wall mounted suitable for bed side light as study lamp complete all as specified and as directed Make: Luker Cat No. LSP07 or equivalent in Havells/ Philips

Supply & fix LED mirror light helios 11 watt complete all as specified and as directed Make: Luker Cat No. LMR9 or equivalent in Havells/ Philips

Supply & fix TARA-M/10W , LED tube light fitting 1x10W MS white powder coated decorative LED T8 batten with PC tube complete all as specified and as directed. Make: C&S Cat No. LTDC01210WLED/WD or equivelent in Havells, Philips.

M&L for concealed Sub main wiring complete with 4 runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with two run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 32 mm or higher dia non metallic rigid PVC conduit and conduit accessories in concealed conduit including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed. Note :- 4 runs of 10 sqmm, 2 run of 10 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length

M&L for concealed Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length

M&L for concealed Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed by engr - in- charge. Note :- 2 runs of 4 sqmm, 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

Supply and fix sheet metal enclosure with distribution board vertical (DB) VTPN, 415 volts, having IP:43 protection, isolated neutral bar, insulated busbar assembly, door earthing arrangement, mechanical impact strength IK08, 04 way double door suitable for fixing MCCB 250 Amps as incommer and MCBs TPN as out going complet, fixed on wall and connecting with all electric connections/circuit complete all as directed by Engineer in charge. Make: Indoasian Cat No. 811895 or equivelent in Havells, Standard.

- All as per Item No 174 above but VTPN DB 08 way

Supply and fix sheet metal enclosure with distribution board vertical (DB) VTPN, 415 volts, having IP:43 protection, isolated neutral bar, insulated busbar assembly, door earthing arrangement, mechanical impact strength IK08, 04 way double door suitable for fixing MCCB 125 Amps as incommer and MCBs SP as out going complet, fixed on wall and connecting with all electric connections/circuit complete all as directed by Engineer in charge. Make: Indoasian Cat No. 811888 or equivelent in Havells, Standard.

- All as per Item No 176 above but VTPN DB 08 way

Supply and fix sheet metal enclosure with distribution board double door (DB) TPN, 415 volts, having IP:43 protection, isolated neutral bar,200 amps insulated busbar assembly, door earthing arrangement, mechanical impact strength IK08, 04 way double door all as specified and as directed

Supply and fix MCCB 3 pole, 16 KA, 415 V, F1 frame, adjustable thermal setting, 250 Amps complete all as specified and as directed. Make: Indoasian Cat No. 830282 or equivelent in Havells, Standard.

- All - as per item No 179 above but 160 Amps

- All -as per item No 179 above but 125 Amps

- All -as per item No 179 above but 100 Amps

- All -as per item No 179 above but 63 Amps

Supply and fix AC circuit breaker Isolater, 10 KA, degree of protection IP20, 415 Volts, 50 Hz, 3 pole, 125 Amps complete complete all as specified and as directed. (As Out going from main DB having 250 Amps MCCB). Make: Indoasian, Cat No. 811201 or equivelent in Havells, Standard.

Supply and fix MCB DB, SPN, 8 ways, Isolated neutral bar, IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete complete all as specified and as directed. Make: Indoasian Cat No. 811826

Supply and fix MCB SPN 6-32 Amps, 240Volts, 10 KA, "C" Curve complete complete all as specified and as directed. Make: Indoasian Cat No. 811153 or equivelent in Havells/Standard

Supply and fix MCB TP 63 Amps, 240Volts, 10 KA, "C" Curve complete complete all as specified and as directed.

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "C" Curve complete all as specified and as directed.

Supply and fix MCB TPN 63 Amps, 240Volts, 10 KA, "C" Curve complete complete all as specified and as directed.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed.

S&F Modular fan regulator step type 120 W, 2 module complete all as specified and as directed.

S&F Modular bell push 6A single pole, one way, 1 module complete all as specified and as directed.

Supply and fix Buzzer, Ding Dong, AC 230 volts complete.

S&F Switch Modular 6A single pole, two way, 1 module complete all as specified and as directed.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:2:4 type B-1 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.

M&L for 4 mm dia galvanised iron or steel wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete complete all as specified and as directed.

S&F Single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

Cutting chases/recess, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fix Electrical Water heater (Geyser) vertical type storage capcity 25 Ltrs, single phase, 2 KW complete, star rating 5, with and including fixing arrangement such as hold fastners, nut/bolts/washers etc and testing complete all as specified and directed. Make: Havells, Cat No. GHWAMGTWH025 / V-Guard Model No. Sprin hot plus 25 Ltr or equivelent in Bajaj/ Usha

M&L for GI tubing medium grade 15 mm bore, ISI marked complete all as specified and as directed.

M&L for stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed of size 15 mm dia bore, complete all as specified and as directed.

supply and fix PVC connection 15 mm size with PTMT nuts of length 600 mm suitable for cold and hot water complete all as specified and as directed.

Cutting existing pipe 20 mm dia and including inserting of new "GI Tee 20mm x 20mm x 15mm " for connecting of size 15 mm bore GI pipe complete all as specified and as directed.

Disconnecting all the connections, dismentling of solar water heater system complete and refixing and re-connecting the same at its original position after completion of civil work on roof complete including servicing, cleaning, de-scaling by using anti corrossive chemical etc and including brazing for arresting leakage if required complete all as specified and directed for upto solar water heater capacity 200 ltrs all as specified and directed.

Disconecting, takin up or down steel tubing/hot water pipe and connections, including cleaning for re-fixing or removal to store complete of size 20 mm dia all as specified and directed.

Disconecting, takin up or down steel tubing/hot water pipe and connections, including cleaning for re-fixing or removal to store complete of size 25 mm to 32mm dia all as specified and directed.

Disconecting, takin up or down steel tubing/hot water pipe and connections, including cleaning for re-fixing or removal to store complete of size 40 to 50mm dia all as specified and directed.

Re-fixing old serviceable GI pipe/hot water pipe and connections in new or old position (Walls, ceiling, floors) complete of size 20 mm bore all as specified and directed.

Re-fixing old serviceable GI pipe/hot water pipe and connections in new or old position (Walls, ceiling, floors) complete of size 40 to 50mm bore all as specified and directed.

Re-fixing old serviceable GI pipe/hot water pipe and connections in new or old position (Walls, ceiling, floors) complete of size 25 to 32mm bore all as specified and directed.

M&L for hot water pipe duly insulated with glass wool and aluminium cladding complete of size 20 mm bore all as specified and directed.

M&L for hot water pipe duly insulated with glass wool and aluminium cladding complete of size 25 mm bore all as specified and directed.

Dismantling of old existing water tanks, cpacity exc 500 ltrs but not e. exc 1000 Ltrs all as specified and directed.

Supply & fixing to the walls or ceiling or laying in floors GI water tubing medium grade with all fittings and fixuters of size 20 mm dia bore all as specified and directed.

Supply & fixing to the walls or ceiling or laying in floors GI water tubing medium grade with all fittings and fixuters of size 25 mm dia bore all as specified and directed.

Supply & fixing to the walls or ceiling or laying in floors GI water tubing medium grade with all fittings and fixuters of size 40 mm dia bore all as specified and directed.

Supply & fixing to the walls or ceiling or laying in floors GI water tubing medium grade with all fittings and fixuters of size 50 mm dia bore all as specified and directed.

Supply and fix gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipes 20 mm size including taking down unserviceable valves all as specified and directed.

Supply and fix gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipes 25 mm size including taking down unserviceable valves all as specified and directed.

Supply and fix gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipes 40 mm size including taking down unserviceable valves all as specified and directed.

Supply and fix gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipes 50 mm size including taking down unserviceable valves all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete all as specified and directed.

Supply and fix Ball brass valves, high pressure, with polythene, float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of size 20 mm dia including taking down unserviceable ball brass valve all as specified and directed.

Supply and fix Ball brass valves, high pressure, with polythene, float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of size 25 mm dia including taking down unserviceable ball brass valve all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in coping, benching and surface channel in drains complete all as specified and directed.

KUMAR AGENCIES

devan enterprises