ADDN / ALTN TO BLDG NO. T-146 AND SPL REPAIR TO BLDG

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down shutter of any description, area exc 1.0 Sqm but not exceeding 2.0 Sqm each, complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, shaft, wells, cesspits, manholes, laying of pipe/ cables etc. and getting out in any type of soil, complete all as specified and directed.

Excavating in post holes (or similar holes) each, not exceeding 0.50 Cum and getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick and removing surplus soil to a distance upto 50 mtr from site, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 mtr above the starting point, complete all as specified and directed.

Removing excavated material (soil) to a distance exc 250 mtr but not exceeding 500 mtr and deposited where directed, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in seismic and other similar bands, string courses, lacing courses, parapets and railings upto 60cm in height, copings, pedastal and the like including weathering, slightly rounded or chamfered angles, throating and including necessary formwork, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and leveled in layers not exc. 15cm thick, watered and well rammed to a true surface, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete etc., complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete etc., complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work with using sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1.4, complete all as specified and directed.

M&L for brick work with using sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1.6, complete all as specified and directed.

M&L for half brick work with sub Class 'B' bricks, old size, straight or curved on plan, built in CM 1:4, complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and directed.

M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.11 Sqm but not exc 0.18 Sqm, laid in floor, laid/ fixed over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed with neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.18 Sqm but not exc 0.36 Sqm, laid in floor, laid/ fixed over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed with spacer and filled with epoxy grout in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x250x7mm or 450x350x7mm thick as on verticle surfaces, fixed on wall, skirtings or verticle surfaces over and including 10mm thick plaster/ backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry/ walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces or stone masonry wall in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer and over and including 2-3mm thick wall care white putty, complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surfaces of walls and applying two coats of cement base paint over and including a coat of primer and exterior 2-3mm wall care putty (shall be applied in two coats), complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer and over and including 2-3mm thick wall care white putty, complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

S&F 25mm dia fancy type mild steel curtain rods, powder coated including fittings such as brackets, wall brackets, knobs as required at site and with wooden gutties and CP screws, complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and fixed at site including making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and fixed at site including making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood flush door shutters, solid core construction with block board core and plywood face on both sides, commercial type, fixed to frame at site, complete all as specified and directed.

S&F 35mm thick 2nd class HW rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, fixed to frame at site, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauge etc (without sash bars), door edges of framing plain, chamfered rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in Clause 8.24 (a) of SSR Part-I, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples, complete all as specified and directed.

S&F 28-30mm thick factory made solid PVC moulded door shutter of wallnut colour, with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification and drawing, complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm, made out of 5mm thick plain colour (wallnut colour) PVC sheet reinforced with MS Square tube, fixed in opening at site, complete all as specified and directed.

S&F 250mm long aluminum alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, cast type, anodised, complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100mm long stainless steel butt hinge, medium weight, ISI Marked, complete all as specified and as directed.

S&F 100mm size butt hinges, medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F 1st class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, not exc 200 Cucm each, complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling wall and ceiling boards, fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets of any thickness including cover fillets or MS/ aluminium grid/ frame, complete all as specified and directed.

S&F false ceiling boards of fibre cement designer tile, white painted (High pressure Steam Cured) of 4mm thick, conforming to IS:14862, size of panel 1220x1220mm / 1195x595mm / 1220x610mm and occeanic, lake & hill design (As approved by GE), fixed with screws over existing metal/ aluminium grid including required cutting/ making opening for services at any height with necessary arrangement of scaffolding with re-fixing of existing electric fittings & fixtures, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Formwork to rough finished concrete surfaces of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed.

Formwork to rough finished concrete sides of columns, pillars, posts, struts and piers, complete all as specified and directed.

Formwork to rough finished edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.

S&F TMT Mild steel bars 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends or as in stirrups and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass CP screws, complete all as specified and directed.

S&F vitreous china wash hand basin of size 550mm x 400mm with full pedestal, white in colour, flat back including MS brackets or brass fastners of suitable size, 32mm dia CP brass coupling and waste pipe, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed.

S&F vitreous china wash hand basin of size 550mm x 400mm with full pedestal, white in colour including CI brackets of angle iron of size 65x65x6mm, embedded/ fixed in PCC block with plain cement concrete 1:2:4 type B-1 and 32mm dia CP brass coupling and waste pipe, 15mm bore 600mm long PVC connection pipe of PTMT and pillar tap, cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shank and fly-nuts, screwed for 15mm bore iron pipe, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed.

S&F chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges, fixed with CP screws, complete all as specified and directed.

S&F chromium plated towel ring, square, fixed with CP screws, complete all as specified and directed.

S&F PVC connection of size 15mm with PTMT nuts of length 300mm, suitable for hot & cold water, complete all as specified and directed.

S&F PVC connection of size 15mm with PTMT nuts of length 600mm, suitable for hot & cold water, complete all as specified and directed.

S&F PVC bathroom mirror cabinet of size 600x400mm with mirror on front door and with towel rail and magnetic looking arrangements, fixed with and including chromium plated brass screws and PVC rawl plugs, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) with using WPC (as required), as in roof padding, leveling course, sub base, kerb, chamfered on edges, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 110mm dia outlet, complete all as specified and directed.

S&F PVC low level flushing cistern of 10 ltrs capacity with top push button includingPVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle, complete all as specified and directed.

S&F vitreous china water closet pan, semi-pedestal pattern (Anglo-Indian type), white in colour including fixing bolts but excluding flushing cistern and flush pipe and connection to drain pipe and flushing cistern, complete all as specified and directed.

S&F jet spray, brass, chromium plated, heavy duty including flexible pipe suitable for 15mm bore water connection, complete all as specified and directed.

S&F 15mm bore bib tap, brass, chromium plated, fancy type, long nose with capstan head handle, screwed down high pressure including brass CP wall flanges, complete all as specified and directed.

S&F stop valve (concealed type), brass, fancy type, chromium plated with long shank and cup, screwed down high pressure with capstan head handle, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

S&F shower rose, brass, chromium plated, 150x150mm, square with and including CP brass arm/bend and wall flange, fixed to 15mm bore iron pipe or union, complete all as specified and directed.

S&F soap dish of size 150x60mm, brass, chromium plated, heavy duty, fixed to wall with brass cadmium plated screws, complete all as specified and directed.

S&F glass shelf assembly, 600mm long, consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated brackets, guard and railing, complete all as specified and directed.

S&F glass corner shelf with chromium plated brackets, guard and railing, complete all as specified and directed.

S&F angle valve, brass, chromium plated, fancy type with capstan head handle, screwed down high pressure including CP brass wall flange, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position with and including necessary GI fittings, complete all as specified and directed.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20mm bore iron pipe or brass ferrule, complete all as specified and directed.

M&L for mirror polished 18-20mm thick granite stone slabs, machine cut, bedded and jointed with grey cement slurry and pointing in white cement with admixture of pigment to match with shade of granite, fixed as in steps, jambs, pillars, window cills, cooking plateforms and the like including rounding and edging, fixed/laid over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed.

Taking up or down GI tubing 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing 25mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

M&L for 15mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

M&L for 25mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

M&L for 40mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for 40mm bore iron pipe, complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for 25mm bore iron pipe, complete all as specified and directed.

Cutting chases, pinning in stone concrete block or slab wall, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10cm in girth, complete all as specified and directed.

S&F pressed steel frame ventilator with top hung shutters, glazed and gauged (combined) including locking arrangements, complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F PVC (SWR) nahani trap to 75mm dia outlet with CP grating, jointing to waste pipe, fixed in cement concrete 1:2:4, type B-1, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls with MS clamps of suitable size, fixed at any height, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend of any radius with oval access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend of any radius, complete all as specified and directed.

S&F 75mm dia outlet PVC (SWR) floor trap, plain/ multi with CP grating including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single 'T' / 'Y'), equal or unequal with access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single 'T' / 'Y'), equal or unequal with access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, plaster etc. complete necessary removal of debris from site, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) in two layer (each layer of 20mm thick) with chicken wire mesh (providing between two layers), finished the surface evan and smooth with false grooves @ 450x450mm, complete all as specified and directed. Note :- Chicken wire mesh shall be measured and paid separately under respective item of this BOQ.

S&F galvanised steel wire cloth, size of mesh 20mm, 0.91mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of concrete surfaces in CM 1:3 with using water proofing compound including repair of doubing roof, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

M&L for preparation of RCC roof slab top by wire brushing and cleaning the dust and forign material etc. complete and applying a coat of hot blown bitumen 85/25 Grade @ 1.20 Kg/Sqm over a coat of bitumen primer @ 0.40 Ltrs/Sqm and thereafter laying of a layer of APP based polymeric membrane (five layered with centre core as 100microns high molecular high density polyethylene film) weighing 3 Kg/Sqm and will be laid as per MES SSR Part-I Para 11.43.2.2 with minium side lap 75mm and end Lap of 150mm bonded with hot blown bitumen 35/25 penetration @ 1.20 Kg/Sqm and blinded with fine sand in dry condition (pleable free) @ 0.50 Kg/Sqm dusted over the bitumen coat, complete all as specified and directed.

S&F 18mm thick prelaminated MDF board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work including 6mm thick beading all-around the shutter, complete all as specified and directed.

M&L for 1st class hardwood, plain, solid, straight for chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for 2nd class hardwood, plain, solid, straight for chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flaps (when open), complete all as specified and directed.

S&F 100mm size hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 140mm, complete all as specified and directed.

S&F brass magnetic catcher of size 50mm, ISI marked, suitable for cupboards and rubber wood shutters, fixed in position with stainless steel screws, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Supply and laying 150mm bore salt glazed stone ware drain pipes, Grade 'A' and jointed, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slabs for manholes, culvert on drain and similar articles with plain faces, set in cement mortar 1:4, complete all as specified and directed.

M&L for extra for forming fair finished drain of channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

S&F in replacement looking mirror of size 450x600mm using 5mm thick mirror, edges rounded, fixed with clips all as specified including teak wood/ PVC frame of size 25x25mm decorative and water proof type including melamine polishing, complete all as specified and directed.

Dismantling water tank and remove to store of capacity exc 250 ltrs but not exc 500 ltrs, complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position, complete all as specified and directed.

S&F ball brass valves, high pressure with polythene float and flynut complete, screwed for 20/25mm bore iron pipe or brass ferrule, complete all as specified and directed.

S&F 20mm bore unions. brass to connect iron to polyethylene, complete all as specified and directed.

S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated etc.) sheetS as in roof covering including ridges, complete all as specified and directed.

S&F prepainted corrugated coloured profiled galvalume/ zinalume sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS-513 (AZ-150 GSM, AI zinc alloy metallic coating 550 Mpa as per AS-1397) with colour/ exterior top coat of silicon modified polyster/ BHPX RW paint system 20 micron top coat applied over 5 micron primer, as in roof coverings/ cladding to walls etc, fixed with galvanised self drilling, self tapping fastners of size 12-14mm x 55mm with EPDM seats, complete all as specified and directed.

S&F prepainted plain coloured profiled galvalume/ zinalume sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS-513 (AZ-150 GSM, AI zinc alloy metallic coating 550 Mpa as per AS-1397) with colour/ exterior top coat of silicon modified polyster/ BHPX RW paint system 20 micron top coat applied over 5 micron primer, as in roof coverings/ cladding to walls, valley gutters etc, fixed with galvanised self drilling, self tapping fastners of size 12-14mm x 55mm with EPDM seats, complete all as specified and directed.

M&L for power coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows, sliding type and ventilators and frame work including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprane gasket required necessary fittings with extruded built up standard tubular section / appropriate 'Z' section and other section of approved make, conforming to IS:733 and IS:1285, fixing with dash fastner of required dia and size including necessary filling up the gaps at junctions i.e. top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiums section shall be smooth, rust free, straight mitred and jointed mechanical wherever required including cleat angle, aluminium snack beading for glazing/ paneling, CP brass/ stainless steel screws, complete all as per architectural drawing and the directed by Engineer-in-Charge.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate 'Z' sections and other sections of approved make, conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, complete all as per architectural drawings and the directions of Engineer-in-Charge.

M&L for anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with aminium anodic coating of grade AC15) of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per site requirement and directed by Engineer-in-Charge.

S&F glazing with 5mm thick frosted/ tinted sheet glass, not exc 0.50 Sqm in each panel, fixed to aluminium section of doors, windows and frame with suitable EPDM rubber packing and powder coated aluminium beading to frame, complete all as specified and directed.

S&F glazing with 5mm thick frosted/ tinted/ plain glass, exc 0.50 Sqm in each panel, fixed to aluminium section of doors, windows, ventilators and frame with suitable EPDM rubber packing and powder coated aluminium beading to frame, complete all as specified and directed.

S&F stainless steel mosquito proof wire cloth, 0.36mm dia of wire and 1.4mm aperture, fixed with aluminium flat/ channel and screws, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, side hung gates, gates (ornamental and intricate design) etc. including all necessary fittings, with ends of bars, shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, staging for water tanks and similar work, conforming to Fe-290, Gde-E-165, complete all as specified and directed.

S&F 0.80mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc. as required, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F replacement sink, made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm including 32mm dia CP waste coupling with PVC waste pipe, complete all as specified and directed.

S&F in replacement stainless steel plate racks of size 750mm x 900mm x 250mm and thickness of SS sheet of 0.60mm, fixed on wall with SS screws or brass fastners of suitable size, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 18-20mm thick, as in flooring, steps, skirtings etc. over and including 15mm thick screed bed or bedding ayer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Demolition of cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

M&L for water proofing treatment to sunken portion of WCs, bathrooms etc. by applying two layers of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm, this layer allowed to air cure for 4 hours then applying slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126Kg/Sqm and allowed to aircure for 4 hours and joints seal with sealing compound, complete all as specified and directed. Note :- Before laying of concrete, joints of trap/ WC/ soil pipes shall be properly sealed with sealing compound of Roofex/ Forrex/ FOSROC and provn of P or S trap and Nahani / floor traps with long arm and spout of 40mm dia.

M&L for 15mm thick rendering on concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as filling in sunken portion etc., complete all as specified and directed.

S&F in replacement vitreous china squatting pan ‘Orissa’ pattern of size 580x440mm, white in colour with integral foot rest (excluding flushing system and flush pipe) with PVC ‘P’ or ‘S’ trap and connection to trap, flush pipe etc including plain cement concrete, complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection including making joints 10mm wide and 30mm deep at spacing not more than 2.5 mtr and at corners as mandatory and filled with sealing compound grade 'A', finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 20mm thick rendering on fair faces of concrete surfaces in CM 1:3 with using water proofing compound including repair of doubing roof/ chajjas/ facia, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

Dismantling boarding of any description, fixed in any position, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, as in cupboards, kitchen cabinets, and similar work including provn of 6mm thick teal wood lipping alround the board/ shutters, complete all as specified and directed.

S&F stainless steel multipurpose basket in wooden drawer/ partitions for storing rations of various types, made of 3-4mm dia stainless steel rods, suitable for modular kitchen, complete all as specified and directed.

S&F stainless steel zero crank hinges (auto), fancy type (with Euro concealed hinges), fixed to shutters in cupboards of standard size and shape, suitable for modular kitchen, complete all as specified and directed.

S&F telescopic drawer side channel of standard size including roller for moving drawer, mild steel bright finish or electrogalvanised, width of flap 30mm, suitable for modular kitchen, complete all as specified and directed.

M&L for precast cement concrete rubber moulded chequered coloured tiles of size 30cm x 30cm x 25mm thick, set in grey cement slurry, jointed and pointed in grey cement with pigment as in floors, fixed over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description and in any position, complete all as specified and directed.

M&L for RCC (Design Mix) of Grade M-25 as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs and mass concrete, complete all as specified and directed.

M&L for RCC (Design Mix) of Grade M-25 as in columns, pillars, piers, posts and struts, complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. Note :- Each line wire to be measured.

M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and directed.

M&L for forming contraction (Dummy) joints of size 65mm deep x 10mm wide, filled with sealing compound Grade 'A', complete all as specified and directed.

M&L for forming contraction joints of size 30mm deep x 10mm wide, filled with sealing compound Grade 'A', complete all as specified and directed.

Supply & Laying 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for walling of random rubble stone masonry, uncoursed, well bounded, bedded and solidly hearted, built in CM 1:4, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains etc, complete all as specified and directed.

M&L for mild steel work for hand rails, half round or other steel section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Taking down carefully existing copper / aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling roses, regulators, bell, fan regulators etc. by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good disturbed surface of walls, floors to match with existing surfaces, complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade, stranded copper conductor cable, single core 1.5 Sqmm for one light / fan point, controlled by one way switch and wire to be drawn in and including rigid PVC concealed conduit of dia not less than 20mm of 2mm wall thickness complete with all accessories including GI annealed metal box 1.2mm thick sheet of suitable size, fixed as flush wall with and including 3mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed and providing earth continuity wire using PVC insulated unsheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm, complete all as specified and directed.

All as per serial item No. 173.00 here-in-above but for one 3/5 pin 5 Amps socket outlet on independent board.

All as per serial item No. 173.00 here-in-above but for bell/ buzzer point, controlled by one push button, on independent board.

All as per serial item No. 173.00 here-in-above but for 3 pin 5/15 Amps socket outlet with wire and continuity wire of size 2.5 Sqmm FRLS PVC insulated unsheathed, 1100 volts grade, stranded copper conductor, complete all as specified and directed.

All as per serial item No. 173.00 here-in-above but for 3/5 pin 5 Amps socket outlet on same board with other switches.

S&F switch piano, flush type, one way, single pole, 5 Amps, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F switch piano, flush type, one way, single pole, 15 Amps, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5/15 Amps, flush type, complete all as specified and directed.

S&F switch piano push bell, flush type, single pole, 5 Amps, complete all as specified and directed.

S&F electronic fan regulator, stepped type, 230/240 Volts, suitable for 1200/1400mm sweep ceiling fan, complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC / polycarbonate isolated body, complete all as specified and directed.

S&F calling bell, suitable for 230 volts, 50 Hz, single pole, AC supply, complete all as specified and directed.

S&F in replacement slim linear LED lighting fixture 18/20 Watt LED batten with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver complete making all connection using 1.5 Sqmm copper conductor multistandard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings including taking down old one, complete all as specified and directed.

S&F in replacement decorative ultra slim linear LED lighting fixture 10/12 Watt LED and making all connection using 1.5 Sqmm copper conductor multistandard PVC insulated 2 Core flexible cable from ceiling rose to fittings by using extra length other than provided by manufacturer, complete all as specified and directed.

S&F in replacement decorative ultra slim linear LED lighting fixture 5/6 Watt LED and making all connection using 1.5 Sqmm copper conductor multistandard PVC insulated 2 Core flexible cable from ceiling rose to fittings, drawn through in PVC flexible conduit, complete all as specified and directed.

S&F in replacement new generation energy saving LED bulk head 9/10 Watt with opal diffuser suitable for 600 LUMEN and connecting up, complete all as specified and directed.

S&F in replacement LED street light fitting 35 Watt, 230 Volts, AC, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection, complete all as specified and directed.

S&F in replacement LED street light fitting 90 Watt, 230 Volts, AC, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection and making connection with 2.5 Sqmm 3 Core copper conductor cable, complete all as specified and directed.

S&F exhaust fan, PVC body, AC, single phase with suitable capacitor, 230 Volts of size 300mm sweep with frame and louvers, complete all as specified and directed.

S&F electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW of capacity 25 litres, BEE 5 Star rated, complete with all accessories such as safety valve, thermostate, NRV, 15mm bore connection piece /hot & cold type etc., complete all as specified and directed.

Taking down ceiling/ exhaust fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location, complete all as specified and directed.

M&L for repair of ceiling fan of 1200mm sweep or exhaust fan of any type, obtained from serial item No. 194.00 here-in-above and oiling, greasing after cleaning slot, overhauling & replacement of defective parts such as split pin, nuts, bolts, washers etc. and painting with spray machine with synthetic enamel paint of white colour and marking of MES No. with black synthetic enamel paint, complete all as specified and directed.

Hanging /fixing only ceiling fan/ exhaust fan in same position and connecting up with provision of 3 core 1 Sqmm stranded flexible copper conductor cable, complete all as specified and directed.

S&F in replacement submain wiring with copper conductor cable (2 runs of cable) multistranded of size 6.0 Sqmm PVC FRLS with all insulated unsheathed in and including PVC concealed conduit of 25mm dia, medium grade and including fittings and 1 Run X 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire, connected to common earth and earth dolly, complete all as specified and directed. Note :- Two run of 6.0 Sqmm and one run 6.0 Sqmm cable with one run of PVC conduit shall be measured as one unit.

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth lead by means of bolts nuts and washers of GI and including earthing pit charcoal, common salt, GI 4mm dia lead wire with 20mm GI medium grade watering pipe and 15mm bore light grade protection pipe upto 5 mtr length with wire mesh and funnel, PCC pit in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), angle iron frame and RCC cover and earth work, complete all as shown in electrical plate No. 3 of SSR-2009 (Part-1) and including dismantling existing old earthng, complete all as specified and directed.

S&F earth continuity conductor or main earthing lead, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 6mm dia galvanised iron or steel wire, complete all as specified and directed.

S&F sheet metal VTPN DBs 160 Amps, double door, 4 Way (optimum F2+12) with metal door, 415 Volts, IP-43 protection grade, fixed flush to wall complete including connections with and including necessary reducer lugs, complete all as specified and directed.

S&F MCCB 4 Pole, 160 Amps, 415 Volts, 36 KA, adustable type including making necessary connection, complete all as specified and directed.

S&F MCCB 4 Pole, 100 Amps, 415 Volts, 36 KA, adustable type including making necessary connection, complete all as specified and directed.

S&F in replacement single pole and neutral steel sheet powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door, SPN DB system, 12 Ways, complete all as specified and directed.

S&F in replacement single pole and neutral steel sheet powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door, SPN DB system, 8 Ways, complete all as specified and directed.

S&F in replacement single pole and neutral steel sheet powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door, SPN DB system, 4 Ways, complete all as specified and directed.

S&F in replacement MCB 63 to 100 Amps, TPN, complete all as specified and directed.

S&F in replacement MCB 40 to 63 Amp, SPN, 'C' series, 240 Volts, 50 Hz, 10 KA and other domestic loads including all terminals, fittings etc, complete all as specified and directed.

S&F in replacement MCB, SP, 6-32 Amps, 'C' series, 240 Volts, 50 Hz, 10 KA, complete all as specified and directed.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core, laid in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface including taking up or down existing cable, complete all as specified and directed.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 2 Core, laid in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface including taking up or down existing cable, complete all as specified and directed.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, sheathed, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, laid in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface including taking up or down existing cable, complete all as specified and directed.

M&L for sand cushioning to underground cable with a layer of sand of 8cm thick before laying the cable and 15cm thick after laying cable and stretching the cable, complete all as specified and directed.

Supply and laying brick, sub class ‘B’, old size, well burnt as covering as mechanical protection to UG cable, complete all as specified and directed.

M&L for 40mm bore GI tubing, light grade with all fitting (as required) and fixed to walls/ poles with suitable MS clamps or laid in floors including taking up or down old GI pipe, complete all as specified and directed.

Taking down serviceable / unserviceable electric meter including meter box from existing position carefully and including making good to disturbed surface to match with existing surface, complete all as specified and directed.

Re-fixing of serviceable electric meter with meter box obtained from serial item No. 215 here-in-above by scouting to wall and fix firmly including making good to disturbed surface to match with existing surface, complete all as specified and directed.

M&L for bore hole for passing of cable through / insertion of 40/80mm dia GI pipe under concrete / road/ runway/ taxi track/ hardstanding etc, depth not less than 1200mm and making good to disturbed surface to match with existing surfcaes, complete all as specified and directed. Note :- The followings shall be deemed to include in the quoted rates. (a) Equipments, T&P and materials required for boring. (b) GI pipe 50/80mm bore, medium grade. (c) Air compressor for boring.

Taking down or up RCC LT poes of any type and size, complete all as specified and directed.

S&F 9.0 mtr long steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws, as specified type 410 SP-31 including two coats on aluminium paint over a coat of red oxide zinc chrome primer after preparation of surface and marking MES No. with black synthetic enamel paint, embedded in groung with PCC, complete all as specified and directed. Note :- Excavation, PCC, returning filling and removing shall be measured and paid separately under respective items of this BOQ.

Supply, installation, connecting electrically and testing of street light junction box of size 450x250x300mm, pole mounted, made out of CRCA sheet 2mm thick powder coated having door with magnetic lock complete with busbar 2 Nos suitable for one phase two wire supply system and aluminium strip of size 20x3mm, one SP MCB 240 Volts 'C' curve type 6 Amps with repturing capacity 10 KA, fixed with MS flat iron clamps of suitable size with nuts, bolts, & washers, complete all as specified and directed.

S&F in replacement GI brackets for fixing of street light fitting, made out of 32mm bore light grade GI pipe 1.5 mtr long, bend to shape, fixed with mild steel clamps of flat iron of size 40x4mm with nuts, bolts, washers and including two coats on aluminium paint over a coat of red oxide zinc chrome primer after preparation of surface, complete all as specified and directed.

S&F two run of single core 2.5 Sqmm for phase & neutral and one run of 2.5 Sqmm for earth continuity, drawn through steel tubular pole and connecting up with proper copper terminals including PVC conduit for giving connection between looping box and street light fitting, complete all as specified and directed.

Supply, installation, commissioning and testing weather proof, outdoor type, double door, busbar chamber i.e. front & back opening, made out of 1.6mm thick MS sheet comprising 4 Nos aluminium strip each of 300 Amps, mounted on insulators with 4 Nos mounting legs, made out of angle iron of size 25x25x5mm, grouted in PCC block of size 30x30x90cm (30cm deep below and 60cm above from normal ground level) in plain cement concrete 1:3:6 type C-2 and connection with suitable size of aluminium thimbles, nuts, bolts & washers including cable glands at entry and outlet points and necessary excavation, earth work, returing filling and removing of surplus soil in any type of soil, complete all as specified and directed.

S&F post top lantern LED type 20 Watt, 230 Volts, AC, outdoor type with decorative post top for 360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volts, complete all as specified and directed.

HANS RAJ SHARMA (BID ID -3142461)

TULSI RAINA AND SONS (BID ID -3141914)