Hyderabad Division: 1) Gati Shakti: Proposed construction of 2-lane ROB in lieu of LC.No.190A at Km.455/100-200 between Janakampet (JKM)-Navipet (NVT) stations- Electrical arrangements 2) SC-MUE Section: Construction of 2-lane ROB in lieu of LC No.198 at Km.482/900-483/0 between Indalvai - Sirnapalli stations- Electrical arrangements

A1-Gati Shakti: Proposed construction of 2-lane ROB in lieu of

Supply of 4core 25 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of LT PVC/XLPE cable of size 4 core 25 Sq.mm

Supply of 4core 16 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of LT PVC/XLPE cable of size 4 core 16 Sq.mm

Supply and fixing of G.I. wire earth continuity of 8 SWG G.I. wire

Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest, as per the directions of Engineer at site

Excavation of cable trench 30 cm widex90cm deep in all types of soils for LTUG cable as per instruction of engineer at site

Supply, erection, connecting, testing and commissioning of 100W LED High bay light fixture complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification

Dismantling of Light Poles/ LT Supply Poles/ Solar Poles and same to be handed over to concerned supervisor

Supply and erection of earth electrode (as per RDSO Drawing No. ETI/OHE/P/7021 & RDSO Spec no. TI0LKO(PSI)/ 38/ 2020 Dt:25.08.2021 or latest)

Supply and fixing of 4 module Plexo Junction Box for MCB IP 65 protection.

Design, fabrication, fixing, connecting and commissioning of outdoor type cable 12 termination box of 2'x2'x1' size with 2mm thick sheet duly providing of clamps to fix with pole and have proper locking arrangements as per the site requirement. This item also includes termination of existing cable to the termination box with copper bus bar of size 75x5mm & 63A 4P MCB as per the directions of the engineer at site.

Supply & erection of Cast Iron LT Cable marker as per the directions of Engineer at site

Supply, fabrication, fixing of MS channels and angles of suitable sizes as per site condition including necessary clamps, bolts, nuts, washers including painting with two coats of red oxide, one coat of aluminum etc. as per directions of engineer at site.

Design, fabrication, supply, erection of hot dip galvanized octagonal pole of 9.0mtr long with 155mm bottom A/F & 70mm top A/F made up of 3mm thick. HT sheet along with base plate of size 260x260x16MM suitable for double arm Sword Bracket with connected accessories etc.

Supply and fixing of M24X750 long 'J' type EN8 grade foundation bolts along with template for 9M long octagonal pole

Design, fabrication, supply, fixing of 1.5Mtrs Length Double Arm sword type (Butterfly or as per design) galvanized with PU Paint finish bracket made up of 48.3mm dia GI pipe with connected accessories etc.

Supply, fixing, testing and commissioning of 90W AC high power LED street light luminaries with lens with embedded PC cover IP65/66 including all connected accessories etc. as per spec.

Foundation & plinth in hard/normal soil including excavation of soil in all type, using including suitable size metal including the cost of metal, sand, cement and curing and other required materials accessories complete etc. as per the instruction of site in-charge Engineer.

Cutting of asphalted road/ concrete/ cement/ under the track etc., and excavation of 20 cable trench 30 cm widex90cm deep road etc., for laying of LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly. Engineer.

Supply, laying, connecting & commissioning of single core FRLS multi strand 1.5 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 2.5 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 4 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 6 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 10 sq. mm Cu. Conductor

Supply, laying, connecting and commissioning of 3 core 2.5 mm sq.mm multi stranded FRLS cu. Conductor as per the directions of Engineer at site

Supply & laying of PVC conduit pipe of 32 mm dia 2 mm thick in concealed/surface as per the directions of Engineer at site

Supply & laying of PVC conduit pipe of 25 mm dia 2 mm thick in concealed/surface as per the directions of Engineer at site

Supply & fixing of PVC conduit moulded bend pipe 32/25 mm dia 2 mm thick in concealed

Supply & fixing of PVC Junction box of suitable way for 32/25 mm dia 2 mm thick PVC conduit pipe in concealed

Supply and laying of flexible 25mm PVC pipe

Supply and erection of ceiling rose.

Supply, fixing, connecting and commissioning of automatic light controlling nature switch device, grade sensors and advanced micro-controllers with suitable power contactor and MCB, enclosed in a FRP enclosure for pole mounting, confirming to IS-54 and similar to swadeep-02 EC-03 kW 1phase. The device should have the following specifications: 1)Operating voltage 33 range:120V, AC 50Hz 2)Switching endurance 5000 cycles of ON and OFF minimum 3)Operating illumination levels a)for switching On-less than 60Lux for 30 seconds b)for switching OFF-greater than 10Lux for 30 seconds 4)Auto voltage levels a)High voltage trip/auto reset - if voltage and gt 280 AC/and it 270V resp. 5)LED for indicating the operating status 6)During based switching OFF option of 04 to 08 hours with resolution of 1/2 hour 7)Override option-continuous ON and continuous OFF

Design, supply, installation, testing and commissioning of cubicle type 14SWG LT panel (Indoor type) with 200 amps sectionalized electrolytic copper bus bar. LT switchgear confirming to IS-8623 or latest. Advanced Multi function meters with CTs of suitable capacity with 34 R.S.485 port for incoming supply with CTs of suitable and RYB LED indication lamps with all other connected accessories etc., as directed by Engineer at site. (1) 2 x 100 A 4pole 35/36KA microprocessor based MCCB (I/C), 1x100A change over switch Out goings: 6x40 Amps TPN MCB, 2x32A DP 'C' curve 10KA MCB, 6x16A SP MCB. Note: 1) MCCBs: ICs=100% ICu 2) All MCCBs should be microprocessor based only

Supply, laying, connecting & commissioning of 25mm x 6mm/ 40mm x 5mm/ 50mm x 6mm thick GI Strip for earth pit as per the directions of engineer at site

Supply, fixing, testing and commissioning of (DP MCB - Incoming & SP/MCB - Outgoing) wall mounted of one row 12 module circuit breaker box made out of thermoplastic, IP 65 36 (with metric knockouts for cable entry) with N terminal, size (202 x 238 x 111)mm complete. The LT distribution board shall be comprising with the following MCBs fixed in it conforming to IS:8828 :1996, ISS & IE rules and site requirement. DP MCB 40-63 Amps. 'C' series = 01 No. (Incoming) SP MCB 6-32 Amps. 'B' series = 07 Nos. (Outgoing)

A2-Construction of 2-lane ROB in lieu of LC No.198 at Km.482/900-483/0

Supply of 4core 25 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest

Laying, connecting, testing and commissioning of LT PVC/XLPE cable of size 4 core 25 Sq.mm

Supply and fixing of G.I. wire earth continuity of 8 SWG G.I. wire

Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest, as per the directions of Engineer at site

Excavation of cable trench 30 cm widex90cm deep in all types of soils for LTUG cable as per the direction of Engineer at site

Dismantling of Light Poles/ LT Supply Poles/ Solar Poles and same to be handed over to concerned supervisor

Supply of earth pit materials and construction of earth pit as per IS 3043:1987 specification. This item also includes of supply and erection of CI pipe of size of 100mm inner diameter, 13mm thickness and 3000mm length. This work also includes of fabrication and fixing of GI strips for earthing connection. Excavated earth pit should be filled by mixture of coke/charcoal, salt and sand up to top. Provision of brick masonry chamber of size 650mmx650mm and depth upto 7 1000mm including light type CI cover frame and applying 12mm thick cement plaster in 1:3 inside and to all the exposed faces up to 300mm below. Foundation level, curing etc., All required materials for this job such as CI pipe cover with frame, salt, cement sand, charcoal gravel, bricks, etc. required bolts, nuts and double washers, number plates or painted plates. Tentative quantity of salt and charcoal shall be of 2.5CMt. The CI pipe should be painted with 2 coats of bitumen paint as per the directions of Rly engineer at site. Note: The work should be strictly done as per IS 3043:1987 specification or latest.

A3-Construction of 2-lane ROB in lieu of LC No.198 at Km.482/900-483/0

Design, fabrication, supply, erection of hot dip galvanized octagonal pole of 9.0mtr long with 155mm bottom A/F & 70mm top A/F made up of 3mm thick. HT sheet along with base plate of size 260x260x16MM suitable for double arm Sword Bracket with connected accessories etc.

Supply and fixing of M24X750 long 'J' type EN8 grade foundation bolts along with template for 9M long octagonal pole

Design, fabrication, supply, fixing of 1.5Mtrs Length Single Arm sword type (Butterfly or as per design) galvanized with PU Paint finish bracket made up of 48.3mm dia GI pipe with connected accessories etc.

Supply, fixing, testing and commissioning of 90W AC high power LED street light luminaries with lens with embedded PC cover IP65/66 including all connected accessories etc. as per spec.

Foundation & plinth in hard/normal soil including excavation of soil in all type, using including suitable size metal including the cost of metal, sand, cement and curing and other required materials accessories complete etc. as per the instruction of site in-charge Engineer.

Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including 6 suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm double arm bracket for fixing of LED light with all connected accessories, etc.

Provision of concrete foundation and constructing the plinth as per the directions of engineer at site.

Supply of 4core 10 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 10 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply of 4core 16 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of LT PVC/XLPE cable of size 4 core 16 Sq.mm

Supply of 4core 25 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of LT PVC/XLPE cable of size 4 core 25 Sq.mm

Supply of 4core 70 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 70 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply and fixing of G.I. wire earth continuity of 8 SWG G.I. wire

Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest, as per the directions of Engineer at site

Supply & erection of HDPE pipe of 63 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest, as per the directions of Engineer at site

Excavation of cable trench 30 cm widex90cm deep in all types of soils for LTUG cable as per direction of engineer at site

Cutting of asphalted road/ concrete/ cement/ under the track etc., and excavation of 20 cable trench 30 cm widex90cm deep road etc., for laying of LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly. Engineer.

Supply, fixing, connecting and commissioning of 90/100 watt LED based street light luminary with cool white light, pressure die cast aluminum housing, IP 65 or better having system complete as specification.

Supply of earth pit materials and construction of earth pit as per IS 3043:1987 specification. This item also includes of supply and erection of CI pipe of size of 100mm inner diameter, 13mm thickness and 3000mm length. This work also includes of fabrication and fixing of GI strips for earthing connection. Excavated earth pit should be filled by mixture of coke/charcoal, salt and sand up to top. Provision of brick masonry chamber of size 650mmx650mm and depth upto 22 1000mm including light type CI cover frame and applying 12mm thick cement plaster in 1:3 inside and to all the exposed faces up to 300mm below. Foundation level, curing etc., All required materials for this job such as CI pipe cover with frame, salt, cement sand, charcoal gravel, bricks, etc. required bolts, nuts and double washers, number plates or painted plates. Tentative quantity of salt and charcoal shall be of 2.5CMt. The CI pipe should be painted with 2 coats of bitumen paint as per the directions of Rly engineer at site. Note: The work should be strictly done as per IS 3043:1987 specification or latest.

Supply, erection, connecting, testing and commissioning of 100W LED High bay light fixture complete with necessary mounting accessories, clamps and hardware etc. as per Railways specification

Supply, laying, connecting & commissioning of 25mm x 6mm/ 40mm x 5mm/ 50mm x 6mm thick GI Strip for earth pit as per the directions of engineer at site

Supply, fixing, connecting and commissioning of steel sheet iron cubicle type 14 SWG Outdoor type DB with 250 amps sectionalized electrolytic copper bus bar(copper bus bar should be 25 RYBN uniform sizes). LT Switch Gear should confirm to IS-8623 or latest. Advanced Multi function meters with CTs of suitable capacity with R.S.485 port for incoming supply and RYB LED indication lamps with all other connected accessories etc., 2x125 A 4 pole 36 KA MCCB Microprocessor based including suitable spreader link, OL(Over Load), SC (Short circuit), Ground fault (I/C), 2x63 A 10KA 'C' curve TPN MCB (O/G), 5x32 A MCB DP 10 KA, 10x20 A MCB SP with lock and key and neutral Link arrangements as per directions of engineer at site. Note: MCCBs: ICs=100% ICu

Supply & fixing of cable termination lug & glands as per the site requirement

Supply and fixing of 4 module Plexo Junction Box for MCB IP 65 protection.

Design, fabrication, fixing, connecting and commissioning of outdoor type cable 28 termination box of 2'x2'x1' size with 2mm thick sheet duly providing of clamps to fix with pole and have proper locking arrangements as per the site requirement. This item also includes termination of existing cable to the termination box with copper bus bar of size 75x5mm & 63A 4P MCB as per the directions of the engineer at site.

Supply & erection of Cast Iron LT Cable Marker as per the directions of Engineer at site

Supply, fixing, connecting and commissioning of automatic light controlling nature switch device, grade sensors and advanced micro-controllers with suitable power contactor and MCB, enclosed in a FRP enclosure for pole mounting, confirming to IS-54 and similar to swadeep-02 EC-03 kW 1phase. The device should have the following specifications: 1)Operating voltage 30 range:120V, AC 50Hz 2)Switching endurance 5000 cycles of ON and OFF minimum 3)Operating illumination levels a)for switching On-less than 60Lux for 30 seconds b)for switching OFF-greater than 10Lux for 30 seconds 4)Auto voltage levels a)High voltage trip/auto reset - if voltage and gt 280 AC/and it 270V resp. 5)LED for indicating the operating status 6)During based switching OFF option of 04 to 08 hours with resolution of 1/2 hour 7)Override option-continuous ON and continuous OFF

Supply, erection, commissioning of 63A 4 Pole ELCB 6 KA with 100mA sensitivity as per the direction of the engineer at site.

Supply, fabrication, fixing of MS channels and angles of suitable sizes as per site condition including necessary clamps, bolts, nuts, washers including painting with two coats of red oxide, one coat of aluminum etc. as per directions of engineer at site.