Construction of Multipurpose Marketing Facility (Single storey) at District Veterinary Complex Kulgam (Civil Works).

Amount

Earth work in excavation by mechanical means in trenches for foundations incl. dressing of sides and ramming of bottoms lift upto 1.5m & lead upto 50m, incl. getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soil.

Providing and laying of soling stone size on level (hand packed) including watering, ramming complete including all carriages upto site complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering- All work upto plinth level Crushed 1:4:8 mix (40 mm nominal size of stone aggregates) PCC below foundation & rooms- Mudmat including all carriages upto site complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering- All work upto plinth level Crushed 1:3:6 mix (20 mm nominal size of stone aggregates) PCC in plinth including all carriages upto site complete.

Filling in plinth etc in layers not exceeding 20 cm in depth consolidating each layer by ramming, watering including all carriages upto site complete job.

Available earth filling in trenches.

Supplying and filling fine sand under flooring in rooms.

GSB filling under flooring in rooms.

P/L in position specified grade of reinforced cement concrete M-20 (1:1.5:3) grade in beams, slabs, walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, stairs, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement including all carriages upto site complete.

All work upto plinth level.

All work above plinth level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. HYSD reinforcement of grade Fe-500 steel bars (TMT) at all levels including all carriages upto site complete.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls (under 20 cm wide)

Structural steel work welded in built up sections, trusses and framed work including 18 gauge steel sheet for eaves boarding, including cutting, hoisting, fixing in position, anchor bolts and applying a priming coat of approved steel primer all complete including all carriages upto site complete.

P/F Track deck CRILL make or equivalent HI rib profiled sheets for roofing and soffit 1000 to 1020 mm cover width 28-35 mm high crests at 250 to 225 mm TCT (total coated thickness) high tensile S.M.P galvalume steel. The sheets shall have wide panes with 3 no. stiffing ribs including all carriages upto site complete.

Providing ridges or hips of width 60cm overall width plain G.S sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/sqm including all carriages upto site complete.

Providing valleys of 90cm wide overall in plain G.S. Sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete 1.60 mm thick with zinc coating not less than 350gm/sqm including all carriages upto site complete.

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl. all carriages complete job.

P/A of 12 mm thick Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) upto floor V level complete in all respects incl. cost of all material, leads, lifts and carriages etc upto site of work complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) incl. all carriages complete job.: First class K.D wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) incl. all carriages complete job. First class K.D wood 35 mm thick.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge incl. all carriages complete job. : First class K.D wood 35 mm thick

P/F 12 mm thick pre-laminated particle board for door shutters including matching wooden beading (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked including all carriages upto site complete.

P/F 4mm thick clear plain glass for fixed glazing panels/ shutters (only panel area to be measured) i/c cost of teak wood beading of required size complete incl. all carriages complete job.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer and all carriages upto site complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. all carriages complete job.

Granite work in floors: Providing and fixing 18mm gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) incl. all carriages complete job.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown including all carriages upto site complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including all carriages upto site complete.

Providing and fixing Ist quality ceramic glazed wall tiles of 300x450 mm of SOMANY, KAJARIA or equivalent make conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incl. all carriages complete job.

Providing and fixing antiskid vitrified pavement tiles 300x300x9.8 mm laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) and jointing with tile grout as per approved colour complete as directed by Engineer-in-charge incl. all carriages complete job.

Providing and applying 2 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incl. all carriages complete job.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work complete job incl. all carriages complete job.

Painting with synthetic enamel paint of approved brand and manufacture on wood/steel work to give an even shade Two or more coats on new work

P/F of 50 mm dia stainless steel railing of 304 grade of hollow tube 1.6 mm thick of Jindal/Salem make or equivalent i/c welding and fixing with SS machine screws for making required size and shape, buffing etc complete and fixing SS balusters upto 900 mm height, newel post not less than 1050 mm height and SS tubes three in one installed horizontally incl. all carriages complete job.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing incl. all carriages complete job.

Supplying and fixing of 25mm PVC conduit of medium class along with accessories incl. cutting and making the walls good wherever required incl. all carriages complete job.

P/F hardware fittings of approved brand and of required type as approved by Engineer in charge, complete as per the specifications incl. all carriages complete job.

Tower bolts 100mm (windows)

handle 125mm (windows)

AL-drop 250mm

Tower bolts 150mm (doors)

handle 150mm (doors)

butt hinges of 100x63x3.2 mm

Laying and fitting of G.I pipes of 15 mm dia nominal bore including fixtures,cutting chases and making good the wall including all carriages upto site complete.

Laying and fitting of PVC pipes of 75/100 mm dia nominal bore including fixtures,cutting chases and making good the wall including all carriages upto site complete.

Providing and fixing water closet squatting pan ( indian type W.C pan ) with 10 litre low level PVC flushing cistern i/c flush pipe (of approved make) manually controlled device (handle lever) with all fittings and fixtures complete, i/c cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china WC pan of size 580 mm.

Providing and fixing white vitreous china wash basin of size (510 x 400 x 290 mm) with pedestal height 820 mm including waste, painting of fittings, cutting and making good the walls wherever required etc complete. Make-Cera-Counsel-Snow white

Providing and fixing stainless steel angle valve with wall flanges (basin mixer, geyser points, WC cistern, sinks) Make-Cera-Garnet F2002201

Providing and fixing stainless steel bib cocks with wall flanges and aerator. Make-Cera-Garnet F2002151

Providing and fixing 35 litres capacity storage type water heater (Geyser) with automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc complete, including cost of PVC connection and relevant fittings conforming to IS:2082. Venus or equivalent make.

Providing and fixing Salem Stainless Steel ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610x460mm bowl depth 200mm

Providing and fixing single lever wall mixer (2-in-1) with telephonic shower arrangement. Make-Cera-Carbon-F1002414

Providing and fixing single lever basin mixer with 450 mm braided connection pipe (without pop-up). Make-Cera-Winslet-F1099451

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT grating circular type (100 mm nominal dia) of approved quality and colour.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including all carriages upto site complete.

Providing and fixing 0.5 HP water pump of approved brand and manufacture including all carriages upto site complete.

Provision for sign board and photographs

MOHAMMAD RAFIQ RATHER

GHULAM NABI RATHER

ROHUL NISAR

M/S BASHIR AHMAD DAR

MOHD ASHRAF WAGAY

Dawwer Ashraf

FAROOQ AHMAD RATHER

AB RASHID WANI

M/S GHULAM MOHIDIN MIR

SHABEER AHMAD KHANDAY