INTERNAL PERIODICAL AND WELCOME MAINTANCE SERVICES REPAIR TO JOINARY PLUMBING FLOOR ROOF ETC AT OFFR MD ACCN IN MAUDE ROAD AND STATION ROAD KABUL LINES PAULTRY FARM AND OTHER MAINT WORK UNDER AGE BR II UNDER GE NORTH DELHI CANTT 10

Amount

M&L for complete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7"/9" to make the surface free fro, dust ,loose paint etc. by skilled labour and applying average 2mm thick water proof putty @ 1 Kg per Sqm over the plastered / old painted wall scrapping to prepare the surface even and smooth and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30mtr the spray machine, appliying distemper should be able to spray in hard to reach areas and penatration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30 mtr the spray machine, appliying distemper should be able to spray in hard to reach areas and penatration of distemper on the surface to achieve excellent application using limited manpower including complete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7"/9" to make the surface free from, dust, loose paint etc. by skilled labour and filling all gaps with water proof putty complete all as specified and directed.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30 mtr the spray machine, appliying distemper should be able to spray in hard to reach areas and penatration of distemper on the surface to achieve excellent application using limited manpower including complete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7"/9" to make the surface free from, dust, loose paint etc. by skilled labour and filling all gaps with water proof putty complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white Cement wash on walls complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white Cement wash on ceiling ( Up to 5 mtr height) complete all as specified and directed. Make:- Birla white/Asian paints/JK White or equivalent as approved by GE.

M&L for one coat of synthetic enamel paint (1st quality) on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. Make:- Asian paint/Berger/Shalimar/Nerolac or equivalent as approved by GE.

M&L for one coat of synthetic enamel paint (1st quality) on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. Make:- Asian paint/Berger/Shalimar/Nerolac or equivalent as approved by GE.

M&L for preparation of old surfaces of wall/ceiling with the help of mechaniser sander machine of approve make (having mechanical vaccum machine with bag for dust collection) to make surface smoth and even complete all as specified and directed.

M&L for applying water proof cement based putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all as specified and directed.

M&L for one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of approved make having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent quotes.complete all as specified and directed.

M&L for applying two coats of smooth acrylic Interior Premium Emulsion with rich matt finish ( 1st quality ) having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of approved make having an electric motor of minimum 1HP with a flow speed of minimum 1ltr per minute having a pressure of 3300psi. Allow 6-8hrs to dry the surface for painting of subsequent quotes.complete all as specified and directed.

M&L for applying two coats of Premium Plastic Paint ( 1st quality ) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L for brick work with burnt clay bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L brick work with burnt clay bricks bricks straight or curved on plan to any radius built in CM 1:6 but except bricks complete all as specified and directed .

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick Ready mix Cement Plaster on faces of brick work or concrete surfaces (External ) finished even and smooth without using extra cement complete all as specified and directed.

M/L for preparation of newly plastered surfaces of any description and applying two coats of white cement wash over a coat of primer all as specified and directed. Make:- Birla white/Asian paints/JK White or equivalent as approved by GE.

M&L for rendering 10mm thick ready mix cement plaster on faces of brick work or concrete surfaces (Internal) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying average 2mm thick water proof putty @ 1 Kg per Sqm over the plastered surface of wall and scrapping to prepare the surface even and smooth and applying two coats of oil bound distemper over a coat of primer using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for rendering 5mm thick ready mix cement plaster on concrete surface as in ceiling/chajja and rainforced cement concrect surfaces (Up to 6 mtr height) complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white cement wash complete all as specified and directed. Make:- Birla white/Asian paints/JK White or equivalent as approved by GE.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L 40mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in floors finished even and smooth using extra complete all as specified and directed.

Supply only glass diving strips 3mm thick and 38mm width inserted in position, confirm to design, complete all as specified and directed.

Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters exc 1.00sqm but not exc 2.00 sqm each complete all as specified and directed.

S&F Rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete all as specified and directed.

S&F mild steel bars as in window guard bars welded to steel window frame or fixed to wooden frame complete all as specified and directed.

Supply and fix 30mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) Frame works for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief. Note - The rate includes the cost of the materials and labour involved in all the operations described above for fixing of frame/ partition.The cost of anchor bolts or screws for joining the frame is included in the rate. Only any other hardware( i. e. tower bolt, sliding door bolt, handle, Glass etc), which may be required, shall be paid for separately.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with truded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions. Note - The rate includes the cost of the materials and labour involved in all the operations described above for fixing of shutters.The cost of anchor bolts or screws for joining the frame is also included in this rate. Only any other hardware ( i. e. tower bolt, sliding door bolt, handle , Glass etc), which may be required, shall be paid for separately.

S&F in repair for powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction.

S&F in repairs door closer hydraulically regulated,of aluminium (Die cast) body universal type suitable for door shutters 851 to 1000mmin width and weight between 38 to 60kg of Hydraulic door closer complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete . (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately)

S&F glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc complete all as per specified and directed.

S&F designer stainless steel fancy type barrel tower bolt 200mm long extruded section complete all as specified and directed. Note- CML number to be imbossed over items.

S&F 150mm size extruded designer stainless steel fancy type handles fabricated type anodised complete all as specified and directed. Note- CML number to be imbossed over items.

S&F 300 mm long designer stainless steel fancy type sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as specified and directed. Note- CML number to be imbossed over items.

S&F 125 mm medium weight stainless steel butt hinges complete all as specified and directed. Note- CML number to be imbossed over items.

M&L for Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismentled portion in CM 1:3 or cement concrete 1:2:4 type B-I as required, Exc half brick but not exc one brick wall.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the serviceable tiles to store and rubbish off the premises etc complete all as specified and directed..

M&L for glazed ceramic coloured tiles of size 450m x 300mm x 7mm thick on vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectengular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including 15mm thick screed bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed.

M&L for vetrified ceramic light shade tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including 15mm thick screed bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectengular) area in vertical surface as skirting/dado of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified

M&L for vetrified ceramic light shade tiles 10mm thick (Square/rectangular) polished area as in vertical surface as skirting/dado of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified .

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) E53:E54 complete all as specified and directed.

S&F 110 mm bore HDPE pipes PN-10 single socketed in any length with rubber ring joints, fixed to walls with clamps etc complete all as specified and directed. Note -Rate including hanging arrangement for fixing of pipes in shaft of Building (up to G+8 Storey)

S&F in repairs HDPE bends any radius bore 110mm. complete all as specified and directed.

S&F in repairs of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incomplete complete all as specified and directed.

M&L 25mm bore tubes medium grade galvanised , with all fittings and fixed, complete to walls, ceiling or laid in floor all as specified. Note:-Rate including hanging arrangement for fixing of GI pipes in shaft of Building (up to G+8 Storey)

M&L for cutting chases, pinning in Brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F in repairs stainless steel curtain rods of 20mm dia incl brackets , side stop complete all as specified and directed.

M/L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint (1st quality) over a coat of primer all as directed and specified. Make:- Asian paint, Berger, Shalimar, Nerolac or equivalent as approved by GE.

Material and labour preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make:- Asian paint, Berger, Shalimar, Nerolac or equivalent as approved by GE.

Dismantaling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) ,round or square pipes including distance pieces etc. complete all as specified and directed.

Dismantaling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, ridges, velly gutters fixed with self tapping screws complete all as specified and directed.

S&F in repairs 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lape fixed L type or J type or cranked hook bolts and washers in roof complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, frame work etc complete all as specified and directed.

S&F GI powder coated frame work of size 605 x 605mm, for celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre , hanging with 6 mm dia GI Hanger , complete all as specified and as directed.

M&L 4mm thick size non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminiumframe work with screws complete all as per manufacturer's instructions and as directed.

M&L preparation of newly plastered surface of Ceiling and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work, complete all as specified and directed.

M&L required for complete removal of old roof treatment including cement mortar bedding and removing debries out side MOD land, (except mudfushka), complete all as specified and directed.

M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type), surface finished even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

M&L for preparation of roof top surfaces by cleaning all the dust and loose material by brush/blower/Grinder including removing of vegetation/plantation from the surface and providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- (i) Application of water proofing treatment will be done by Authorised Applicator duly approved by GE in writing. (ii) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators (iii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for racking out old joints of roof tiles and flush pointing in cement mortar (1:3) mixed with SBR of FOSROC upto depth of 20mm complete including cutting / removing vegetation, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

M&L for 18mm thick PVC sheet consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws complete all as specified and directed.

M&L for 6mm thick PVC sheet consisting of carcass one side decorative lamination and other side balancing white sheet consisting of carcass fixed with approved adhesive and self tapping screws complete all as specified and directed.

S&F for 20mm wide & 1mm thick PVC edge beading pasted to edges of PVC furniture with suitable adhesive complete all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed .

S&F in repair stainleless steel handle 75mm fancy type for cub board shutter complete all as specified and directed.

S&F stainless steel continuous piano hinges brightfinish or electrogalvinised width of flap 40 mm complete all as specified and directed.

Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,window-cills, cooking platform and like in cement morter 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete including 15mm thick bedding layer in cement mortar 1:6 as in cooking platform complete all as specified and directed.

M&L for dismantling loose concrete cover ( for Guniting work ) of RCC coloums, beams, slabs, Chajjas , and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75mm x 75mm of 2mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture( WPC rate also included) as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4 including water proof compound, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 06 mtr height from ground level).

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter (with particle board core) , 28 to 30mm thick (stiles) , with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded prelam PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed.

M&L for factory made Plain framed, panelled shutter (two panel) 35 mm thick with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated 08021, complete all as specified and directed.

S&F 100mm medium weight stainless steel butt hinges complete all as specified, Note- CML number to be imbossed over items.

M&L for vitrified ceramic tiles (Dark shade) 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including 15mm thick screed bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed. .

M&L for Vetrified ceramic (dark shade) tiles 10mm thick (Square/rectangular) polished area as in vertical surface as skirting/dado of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified .

S&F in repair frameless looking mirror 5mm thick, fixing with 4 holes & complete accessories complete all as specified and directed. Make : Modi Guard or equivalent as approved by GE.

M/L exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid 6mm thick complete all as specified and directed. Note : frame work for ceiling shall be measured and paid seperately

M&L anodised aluminum snap grid frame work of size 605mm x 605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long with and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

Supply and fixing of aluminium door powder coated of extrusion aluminium section, consisting of frame vertical and horizontal members of size 100mm x 45mm x 2.5mm thick with shutter style 85mm x 45mm x 2.50mm thick, Top, middle and bottom rial of size 101.60mm x 44.50 and meeting style 47.50mm x 44.50mm thick with 5.50mm thick tinted sheet glass of modi guard/Atul or 6mm this aluminium board with aluminium bedding and rubber gasket/beading including fixing of hydraulic floor spring one in single leaf or two nos in double leaf door of Make Kelvin/Evershine or equivalent as approved. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door with suitable door handle ornament type with hinges 100 mm long complete . Fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and directed. Note:- 5.5mm thick tinted glass or 12mm thick prelaminated particle board will be measured and paid for separetetly under repective items.

Supply and fix aluminum powder coated three track sliding window with frame and two no's glazed shutter and one no's gauzed shutter/Ventilator shutters side hung type with or without sash bar, locking rails, locking arrangements with frames including necessary joinery, cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, suitable handle, tower bolt, hinges and glazing of 5.5mm thick size. Size of top rail, bottom rail shall be 44.45mm x 44.45mm and size of frame shall be 65mm x 44.45mm and thickness of aluminum 2.50mm thick complete all as specified in MES SSR-2009, Part-I complete all as specified and directed. Note:- 5.5mm thick tinted glass or wire mesh will be measured and paid for separetetly under repective items.

M&L for powder coated aluminium grill in repairs of powder coating of minimum 50 micron with aluminium mesh of sze 50mm x 50mm with square tube solid 6mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed.

S&F in repairs galvanised stainless steel wire cloth, 0.36mm nominal dia of wire and averege width of aperture 1.40mm, complete all as specified and directed.

S&F galvanised stainless steel wire cloth, 0.36mm nominal dia of wire and averege width of aperture 1.40mm, complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and otherside balancing white lamination , fixed with screw as in shelf for cup board complete all as specified and directed.

S&F for extra over item of block board or veneered particle board18/19 mm thick for external teak wood lipping, 6mm thick, fixed with nails etc complete all as specified and directed.

S&F brass continuous piano hinges bright finish or electro galvinised width of flap 40mm complete all as specified and directed.

ANSH VANSH CONSTRUCTION COMPANY

M/S GR construction compony

Mudit Interior and Developer

SAI SARTHI ENGINEERING & CONSTRUCTION CO.

M/S AADI ENTERPRISES

R. S. Associates

LAMBA ENTERPRISES

Paradise Interior