CERTAIN REPAIRS AND POLISHING TO WOODEN FURNITURE UNDER GE S PATHANKOT

Amount

REPAIR TO CHAIR DINING (FD-279, FD-1105)

Taking out old unserviceable front leg and Supply & Fixing of new front leg of size 460mm x 55mm x 30mm of existing size & shape made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 1.01 above But rear leg of size 890mm long x 55mm x 30mm.

All as per Item Ser No 1.01 above But side/back rail 375mm x 30mm x 65mm with drilling hole for canning.

All as per Item Ser No 1.01 above But front rail 410mm x 30mm x 65mm with drilling hole for canning.

All as per Item Ser No 1.01 above But back rest of size 375mm x 45mm x 20mm

All as per Item Ser No.1.01 above But bottom side stiffener of size 375mm x 20mm x 25mm

All as per Item Ser No.1.01 above But bottom centre stiffener of size 420mm x 20mm x 25mm

Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE

Material & labour for polishing of chair after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO CHAIR EASY (FD-229, FD-1108)

Taking out old unserviceable front leg and Supply & Fixing of new front legs of size 545 mm x 55mm x 30mm of existing size & shape made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No.2.01 above But back leg of size 490mm x 55mm x 30mm

All as per Item Ser No.2.01 above But Arm of size 610mm x 65mm x 30mm

All as per Item Ser No.2.01 above But Seat side frame 575mm x70mm x40mm duly drilling hole for canning.

All as per Item Ser No.2.01 above But Seat front frame 510mm x 55mm x 25mm duly drilling hole for half round plastic cane.

All as per Item Ser No.2.01 above But seat back frame of size 480mm x 70mm x 40mm duly drilling hole for half round plastic cane.

Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE

Material & labour for polishing of chair after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO CHAIR WRITING (FD-280)

Taking out old unserviceable front leg and Supply & Fixing of new front leg of size 685mm x 30 mm x 55 mm of existing size & shape made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No.3.01 above But rear leg of size 890mm x 30mm x 55mm

All as per Item Ser No.3.01 above But front rail of size 505mm x 30mm x 65mm

All as per Item Ser No.3.01 above But back rail of size 440mm x 30mm x 65mm

All as per Item Ser No.3.01 above But side rail of size 440mm x 30mm x 65mm

All as per Item Ser No 3.01 above But back rest of size 440mm x 50mm x 15mm

All as per Item Ser No.3.01 above But Arms of size 470mm x 60mm x 25mm

All as per Item Ser No.3.01 above But bottom centre stiffener of size 490mm x 25mm x 20mm

All as per Item Ser No 3.01 above But bottom side stiffener of size 415mm x25mm x 20mm

Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE

Material & Labour for polishing of chair after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO CHAIR WRITING WITH CUSHIONED SEAT & BACK (FD-1107)

Taking out old unserviceable front leg and Supply & Fixing of new front leg of size 625mm x 45mm x 25mm of existing size & shape made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No.4.01 above But rear leg of size 850mm x 45mm x 25mm

All as per Item Ser No.4.01 above But front/rear rail of size 495mm x 25mm x 70mm

All as per Item Ser No.4.01 above But side rail of size 395mm x 25mm x 70mm

All as per Item Ser No.4.01 above But Seat side frame of size 395mm x 30mm x 35mm

All as per Item Ser No 4.01 above But seat front/rear frame of size 495mm x 30mm x 35mm

All as per Item Ser No.4.01 above But Arms of size 415mm x 60mm x 30mm

All as per Item Ser No.4.01 above But stiffener of size 415mm x 25mm x 20mm

Taking out old unserviceable foam from back rest of chair and S & F of new foam of size 450mm x 250mm x 50mm thick of 32 density as specified and shown in drg. Make-Feather Foam/Sleep well /Kurlon.

Taking out old unserviceable foam from seat of chair and S & F of new foam of size 470mm x 470mm x 75mm thick of 32 density as specified and shown in drg. Make-Feather Foam/Sleep well /Kurlon.

Taking out old unserviceable rexine cloth from back rest foam and S & F of new rexine cloth for back rest foam of size 450mm x 250mm x 50mm duly stiched as specified and shown in drg. Rexine shall be approved by GE. Rate of rexine shall not be less than Rs.200/- per RM.

Taking out old unserviceable rexine cloth from seat foam and S & F of new rexine cloth for seat foam of size 470mm x 470mm x 75mm duly stiched as specified and shown in drg. Rexine shall be approved by GE. Rate of rexine shall not be less than Rs.200/- per RM.

Material & labour for polishing of chair after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO CHAIR BKB/WB ( FD-225, FD-285)

Taking out old unserviceable front leg and Supply & Fixing of new front leg of size 455mm x 45mm x 45mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No. 5.01 above but rear leg of size 835mm x 65mm x 45mm

All as per Item Ser No. 5.01 above but front rail of size 440mm x 65mm x 30mm

All as per Item Ser No. 5.01 above but side rail of size 395mm x 65mm x 30mm

All as per Item Ser No. 5.01 above but back rail of size 360mm x 65mm x 30mm

All as per Item Ser No. 5.01 above but bottom side stiffner 395mm x 25mm x 20mm

All as per Item Ser No 5.01 above but bottom centre stiffner of size 395mm x 25mm x 20mm

All as per Item Ser No. 5.01 above but back rest of size 360mm x 50mm x 15mm

Taking out old unserviceable seat and S & F of new seat of size 400mm x 395mm made out of ply wood commercial 6 mm thick Make-Century Ply/Kit Ply/ Greenply/ DURO duly perforated as shown on drg and fixed with steel screws 20 mm dia all as specified and as directed by Engr-in-Charge.

Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE

Material & labour for polishing of chair after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO BED HARD PLYWOOD TOP (FD-246, FD-247)

Taking out old unserviceable long rail and Supply & Fixing of new long rail 1920mm x 90mm x 35mm made out of well seasoned Ist class hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

Taking out old unserviceable stiffener and S & F of new stiffener of size 865mm x 60mm x 40mm of well seasoned 1st class hard sheesham wood duly wrought and ends made to shape all as shown on drawing and as directed by Engr-in-Charge.

Taking out old unserviceable head rest complete and S & F of new head rest complete of size 900mm x460mm made out of well seasoned 1st class hard sheesham wood and plywood one side teak faced 4mm thick Make-Century Ply/Kit Ply/Greenply/National fixined on the frame, Legs made out of sheesham wood of size 660mm x 60mm x 60mm, But 30 x 30mm at bottom, Frame made out of sheesham wood of size 840mm x 45mm x 30mm & plywood of size 840mm x 360mm x 4mm thick, all as shown on drawing and as directed by Engr-in-Charge.

Taking out old unserviceable foot rest complete and S & F of new foot rest complete of size 900mm x 300mm made out of well seasoned 1st class hard sheesham wood and plywood one side teak faced 4mm thick Make-Century Ply/Kit Ply/Greenply/National fixined on the frame, Legs made out of sheesham wood of size 500mm x 60mm x 60mm, Frame made out of sheesham wood of size 840mm x 45mm x 30mm & plywood of size 840mm x 220mm x 4mm thick, all as shown on drawing and as directed by Engr-in-Charge.

Taking out old unserviceable foot rest plywood and S & F of new one side teak faced 4 mm thick plywood of size 840mm x 230mm x 4mm thick Make-Century Ply/Kit Ply/ Greenply/ National on the foot rest frame with 4mm half round teak wood beading all around all as specified and as directed.

Taking out old unserviceable head rest plywood and S & F of new one side teak faced 4 mm thick plywood of size 840mm x 350mm x 4mm thick Make-Century Ply/Kit Ply/Greenply/National on the head rest frame with 4mm half round teak wood beading all around all as specified and as directed.

Taking out old unserviceable plywood and S & F of new plywood 1920mm x 900mm x 12 mm thick type AA ISI, BWP, Marked Make-Century Ply/Kit Ply/Greenply/DURO on the top of the bed including taking out old broken/chipped off plywood all as specified and as directed.

Taking out old unserviceable and S & F of new L type MS flat Iron 35mm x5mm x 150mm at all corners of bed all as specified and as directed.

Material & labour for polishing of bed hard after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE WRITING ( FD-275, FD-1116)

Taking out old unserviceable top and Supply & fixing of new top of size 1145mm x 600mm made out of 18mm thick pre-laminated particle board, one side with teak shade as approved and balancing white (Make- Century ply/ Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified and shown on drawing and as directed by Engineer-in- Charge.

Taking out old unserviceable legs and S & F of new legs of size 760mm x 55mm x 35mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 7.02 above But Top front rail of size 650mm x 25mm x50mm.

All as per Item Ser No 7.02 above But Top rear rail of size 1090mm x 25mm x 50mm.

All as per Item Ser No 7.02 above But Top side rail of size 565mm x 25mm x50mm.

All as per Item Ser No 7.02 above But bottom side rail of size 565mm x 25mm x 50mm.

All as per Item Ser No 7.02 above but bottom stiffener of size 1120mm x 25mm x 50mm.

Taking out old unserviceable backs and S & F of new back of size 400mm x 625mm made out of 6mm commercial plywood. All as specified and shown on drawing and as directed by Engineer-in- Charge.

Taking out old unserviceable Shutter and S & F new Shutter of size 450mm x 375mm made out of 18mm thick pre-laminated particle board, one side with teak shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round duly fixed with piano hinges with wooden screws and 01 x fancy knobs shall be provided to the shutter as directed by Engineer-in-charge.

Taking out old unserviceable drawer and S & F of new drawers of size 550mm x 100mm both side & 355mm x 100mm back side made out of 12 mm thick plywood commercial plywood execpt bottom and front. Bottom shall be 6mm ply wood commercial of size 550mm x 355mm. Front portion of drawer shall be made out of 18mm thick pre-laminated particle board, one side with teak shade as approved and balancing white with 4 mm teak wood edging all round of size 355mm x 100mm with fancy knob shall be provided. All as specified, shown on drawing and as directed by Engineer-in- Charge.

Material & labour for polishing of table writing after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE 900 X 600 X 760 MM WITHOUT DRAWER (FD-284)

Taking out unserviceable top of table and Supply & Fixing of New top of size 900mm x 600mm made out of 18mm thick pre-laminated particle board, one side with teak shade as approved and balancing white (Make- Century ply / Green ply/Action TESA)with 4 mm teak wood edging all round all as specified, shown on drawing and as directed by Engineer-in- Charge

Taking out unserviceable legs of table and Supply & Fixing of New leg of size 760mm x 60mm x 30mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 8.02 above But Top front/rear rail of size 840mm x 20mm x 60mm

All as per Item Ser No 8.02 above But Top side rail of size 570mm x 20mm x 60mm

All as per Item Ser No 8.02 above but bottom stiffener of size 880mm x 20mm x 60mm.

All as per Item Ser No 8.02 above But bottom side rail of size 570mm x 20mm x 60mm.

Material & labour for polishing of table after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE WITH DRAWER (900 X 600 X 760MM) FD-283

Taking out unserviceable top of table and Supply & Fixing of New top of size 900mm x 600mm made out of 18mm thick pre-laminated particle board, one side with teak shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round all as specified, shown on drawing and as directed by Engineer-in- Charge

Taking out unserviceable legs of table and Supply & Fixing of New leg of size 760mm x 60mm x 30mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 9.02 above But Top rear rail of size 840mm x 20mm x 110mm

All as per Item Ser No 9.02 above But Top side rail of size 570mm x 20mm x 110mm .

All as per Item Ser No 9.02 above but bottom stiffener of size 880mm x 20mm x 60mm.

All as per Item Ser No 9.02 above But bottom side rail of size 570mm x 20mm x 60mm.

Taking out old unserviceable drawer and S & F of new drawers of size 550mm x 100mm both side & 350mm x 100mm back side made out of 12 mm thick plywood commercial plywood execpt bottom and front. Bottom shall be 6mm ply wood commercial of size 550mm x 350mm. Front portion of drawer shall be made out of Ist class well seasoned hard sheesham wood of size 350mm x 100mm with Fancy knob. All as specified, shown on drawing and as directed by Engineer-in- Charge.

Material & labour for polishing of table after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE DRESSING LADIES (FD-251 FD-378)

Taking out unserviceable drawer and Supply & Fixing of new drawer of size 425 mm x 365mm x 140mm. Both Sides & back made out of 12mm thick commercial plywood side size shall be 365mm x 140mm & back shall be 425mm x 140mm. Bottom shall be made of 6mm ply wood commercial of size 425mm x 365mm. Front portion of drawer shall be pre-laminated particle board 18mm of size 425mm x 140mm with Fancy knob. All as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable mirror with frame and S & F of new Electro copper plated mirror 5.5mm thick x 1220 mm x 366mm Make- Modiguard/Saint Gobind with Teak wood beading 25mm x 20mm and back frame of size 1250mm x 45mm x 35mm & 400mm x 45mm x 35mm all as per Drg. 6mm commercial plywood of size 1250mm x 400mm shall be provided to back support to the mirror frame of approved make. all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable glass and S & F of new glass plain 6mm of size 425mm x 365mm x 140mm as per Drg.

Taking out unserviceable aluminium channel and S & F of new aluminium channel of size 870mm x 20mm x 15mm, all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable back side plywood and S & F of new ply wood commercial 6mm of 900mm x 380mm as per Drg.

Material and labour for polishing of table dressing ladies after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE DRESSING GENTS (FD-230, FD-379)

Taking out unserviceable drawer and Supply & Fixing of new drawer of size 298mm x 276mm x 120mm . Both Sides & back made out of 12mm thick commercial plywood side size shall be 276mm x 120mm. Bottom shall be made of 6mm ply wood commercial of size 298mm x 276mm. Front portion of drawer shall be made out of 12mm thick teak face Pre-laminated particle board of size 298mm x 120mm with fancy knob. All as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable mirror with frame and S & F of new Electro copper plated mirror 5.5mm thick x 760mm x 380mm Make- Modiguard/Saint Gobind with Teak wood frame of size 800mm x 25mm x 35mm & 425 x 25mm x 35mm as per Drg. 6mm commercial plywood of size 800mm x 425mm shall be provided to back support to the mirror frame of approved make. all as specified, shown on drawing and as directed by Engineer-in- Charge.

Material and labour for polishing of table dressing gents after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE DINNING 6 PERS (FD-273)

Taking out unserviceable top of table dinning 6 pers and Supply & Fixing of new top of size 1500mm x 900mm of 18mm thick pre-laminated particle board, one side with shade as approved and balancing white with (Make- Century ply / Green ply/Action TESA) 4 mm teak wood edging all round.(Make- Century ply / Green ply/Action TESA) all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable legs of table and Supply & Fixing of New leg of size 760mm x 75mm x 40mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 12.02 above But Top Front/Rear rail of size 1425mm x100mm x 25mm

All as per Item Ser No 12.02 above But Top Side rail of size 860mm x 100mm x 25mm

All as per Item Ser No 12.02 above But Top stiffner of size 860mm x 100mm x 25mm

Material and labour for polishing of table dining 6 Pers after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE DINNING 8 PERS (FD-273)

Taking out unserviceable top of table dinning 8 pers and Supply & Fixing of new top of size 1800mm x 900mm of 18mm thick pre-laminated particle board, one side with shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round. all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable legs of table and Supply & Fixing of New leg of size 760mm x 75mm x 40mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 13.02 above but Front/Rear rail of size 1725mm x 100mm x 25mm

All as per Item Ser No 13.02 above but Side rail of size 860mm x 100mm x 25mm

All as per Item Ser No 13.02 above but stiffner of size 860mm x 100mm x 25mm

Material and labour for polishing of table dining 8 Pers after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE 900MM x 900MM X760MM ( FD-291)

Taking out unserviceable top of table and Supply & Fixing of new top of size 900mm x 900mm of 18mm thick pre-laminated particle board, one side with shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round. all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable leg, Supply & Fixing of new leg of size 760mm x 55mm x35mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 14.02 above But Front/Rear/Side rail of size 845mm x 75mm x 25mm.

Material and labour for polishing of table after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TEAPOY (FD-278, FD-382, FD-232)

Taking out unserviceable top of teapoy and Supply & Fixing of new top of size 600mm x 450mm of 18 mm thick pre-laminated particle board, one side with shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable legs of teapoy and Supply & Fixing of New leg of size 540mm x 30mm x 60mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 15.02 above But Top Front/Rear rail/Bottom stiffener of size 540mm x20mm x50mm.

All as per Item Ser No 15.02 above But Top Side rail/Bottom rail of size 420mm x 20mm x 50mm.

Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE

Material and labour for polishing of Teapoy after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO PEG TABLE (FD-277, FD-384, FD-390, FD-1114)

Taking out unserviceable top of Peg table and Supply & Fixing of new top of size 450mm x300mm of 18 mm thick pre-laminated particle board, one side with shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable legs of peg table and Supply & Fixing of New leg of size 380mm x 30mm x 50mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 16.02 above But Top Front/Rear rail of size 400mm x 20mm x 40mm.

All as per Item Ser No 16.02 above But Top Side rail of of size 270mm x 20mm x 40mm.

Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE

Material and labour for polishing of Peg table after cleaning smoothing the surface old or new with sand/ emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE CENTRE (FD-274, FD-275)

Taking out unserviceable top of centre table and Supply & Fixing of new top of size 900mm x450mm of 18 mm thick pre-laminated particle board, one side with shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable legs of centre table and Supply & Fixing of New leg of size 400mm x 30mm x 60mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per Item Ser No 17.02 above But Top Front/Rear rail/ Bottom stiffener of size 840mm x 20mm x 50mm

All as per Item Ser No 17.02 above But Top Side rail/bottom rail of size 430mm x 20mm x 50mm.

Taking out old unserviceable PVC shoes and S & F of new Hard rubber PVC shoes with steel screw superior quality approved by GE

Material and labour for polishing of table centre after cleaning smoothing the surface old or new with sand/ emery paper, refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO TABLE OFFICE CLEARK WOODEN (FD-31)

Taking out unserviceable top of table and Supply & Fixing of new top of size 1380mm x 840mm of 18 mm thick pre-laminated particle board, one side with shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable legs and S & F new legs of size 740mm x 50mm x 50mm made out of Ist class well seasoned hard sheesham wood with bamboo pins and synthetic resin adhesive by making Tenon/Groove joints as specified size and section duly wrought on all sides. All as per shown in drg and as directed by Engineer-in- Charge.

All as per srl 18.02 above But Top Front/rear rail of size 1350mm x50mm x 25mm

All as per srl 18.02 above But Top side rail of size 770mm x 50mm x 25mm

All as per srl 18.02 above But bottom rail of size 770mm x 50mm x 25mm.

All as per srl 18.02 above But centre stiffner of size 1380mm x 50mm x 25mm.

Taking out unserviceable drawer and S & F new drawer made out of 12mm thick commercial plywood grade of size 500mm x 350mm x 250mm except front & bottom portion of drawer. Front portion of drawer shall be of size 500mm x 250mm of 18mm thick pre-laminated particle board & bottom of size 500mm x 350mm x 250mm shall be made of 6mm plywood commercial & Fancy knob to be fixed as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

Material and labour for polishing of table office cleark wooden after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/ cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

REPAIR TO SOFA SET 5 SEATER (1 Three seater and 2 Single seater) FD-281, FD-1113

Taking out unservieable cushion and Supply & fixing of new cushion of size 560mm x 530mm x 100mm of 32 density Make-Feather Foam/Sleep well /Kurlon, duly covered with tapestry cloth with chain system for seat and back of sofa set five seaters (Set of 10 pieces). cloth not less than Rs 300/- per mtr as approved by GE all as specified and shown on drgs.

Taking out unservieable cushion cover and Supply & fixing of new cushion cover of size 560mm x 530mm for seat and back of sofa set duly stiched with tapestry cloth with chain system. Cloth not less than Rs 300/- per mtr as approved by GE.

M & L for polishing to Sofa set 5 Seater after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper as approved Make.

REPAIR TO SOFA SET 4 SEATER ( 4 Single Seater) FD-1113

Taking out unservieable cushion and Supply & fixing of new cushion of size 560mm x 530mm x 100mm of 32 density Make-Feather Foam/Sleep well /Kurlon, duly covered with tapestry cloth with chain system for seat and back of sofa set 4 seaters (Set of 8 pieces).cloth not less than Rs 300/- per mtr as approved by GE all as specified and shown on drgs.

M & L for polishing to Sofa set 4 Seater after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper as approved Make.

REPAIR TO TABLE BED SIDE WOODEN (FD-276)

Taking out unserviceable top/shelf/bottom of table bed side, Supply & Fixing of new top/shelf/bottom of size 375mmx300mmx12mm plank of Ist class hard sheesham wood of existing size and shape. All as specified, shown on drawing and as directed by engineer-in- Charge.

Taking out unserviceable left/right side, Supply & Fixing of new left/right side of size 435mm x 300mm x12mm plank of Ist class hard sheesham wood of existing size and shape. All as specified, shown on drawing and as directed by engineer-in- Charge.

Taking out unserviceable back of table bed side and supply & fixing of new back of size 435mm x 375mm x 6mm plywood commercial. All as specified, shown on drawing and as directed by engineer-in- Charge.

Material and labour for polishing of table bed side after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish Make-Salimar as approved.

REPAIR TO TABLE OFFICE OFFICER WOODEN (FD-32, DB-4122)

Taking out unserviceable top of table and Supply & Fixing of new top of size 1680mm x 870mm of 18 mm thick pre-laminated particle board, one side with shade as approved and balancing white (Make- Century ply / Green ply/Action TESA) with 4 mm teak wood edging all round, all as specified, shown on drawing and as directed by Engineer-in- Charge.

Taking out unserviceable drawer and S & F new drawer made out of 12mm thick commercial plywood grade of size 500mm x 350mm x 250mm except front & bottom portion of drawer. Front portion of drawer shall be of size 500mm x 250mm of 18mm thick pre-laminated particle board & bottom of size 500mm x 350mm x 250mm shall be made of 6mm plywood commercial & Fancy knob to be fixed as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

Material and labour for polishing of table office officer wooden after cleaning smoothing the surface old or new with sand/emery paper,refling the borer holes/cracks with putty wherever required appling the raw siana/burnt siana as per requirement make smooth again by sand/emery paper polish the chair with French polish as approved Make.

RE-CANNING OF CHAIRS (FD-279, FD-1105, FD-229,FD-1108, FD-280)

Taking down old cane from the all type of Chairs dining, Chair Writing,Chair Easy and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

vivek and co

Harson Enterprises