Construction of Anganwadi building at Mylampalayam H/O Velliraveli.

Amount

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation

Cement concrete 1:4:8 mix using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying standard specification.

Collection and supply of gritty gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Re Filling with excavated earth as per standard specifications etc complete

Brick work in cement Mortor 1:5 (One cement and five sand) using second class Bricks of size 23 x 11.5 x 7.5 cms for the following including mixing mortar and all other labour charges etc complete.

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

Centering below Ground level

Rate for column post

Rate for sunshade

Rate for roof slab, lintel, beam

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Plastering with C. M 1: 3 mix, 10 mm thick including cost and conveyance of all materials to site and labour charges etc complete.

Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Weathering course with best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be listed) over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid over into a single layer and consolidated to required finished thickness beating the mixture with wooden beaters keeping the surface constantly welted by sprinkling lime jaggery water including all other labour charges etc., complete

Finishing the top of the roof with one course of Machine PressedTiles of size 20 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specificatins

Paving the Floor with scratch proof vitrified tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Floor finishing with granolithic cement concrete 1:2:4 to a thickness of 25 mm (One cement, Two Sand and four broken granite metal)using 10 to 12 mm ISS Broken Hard granite metal including watering whenever necessary and paid in lay not more than 15 cm compacting etc., complete complying with standard specification

Dadooing with Glazes tiles of 200mmx300mm including cost and conveyance of all materials to site and all labour charges etc complete

Distempering two coats using OLD or NEW Plastered surface using Oil Bound Distemper including cost and all Labour charges etc., complete

Painting two coats over NEW Plastered surface using Approved Quality of Exterior Emulsion Paint including cost and all Labour charges etc., complete

Painting two coats over new iron work using synthetic enamal paint including cost and conveyance of all materials to site etc complete

Supply and fabrication of steel door including cost and conveyance of all materials to work site and labor charges etc complete

Steel Door

Steel Window

Cost & Supply For Baby W.C including cost and conveyance of all materials to work site and labor charges etc complete

Supply and Fixing IWC in physically challenged person toilet including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply of Cudappah Slab including cost and conveyance of all materials to work site and labor charges etc complete

Light/Fan Point Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator) SD 1

Plug Point "Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and the celling with PVC accessories in flush with wall with suitable flushtype TW switch box to house the control switch and regulator and covered with 3mm thick hylern sheet withcontinuous earth wire connection of 14 SWG TC wire making good of the concealed portion with suitable colour for concealed fan point (for rheostatic type fan regulator)- SD -10.

Supply and fixing of 16 Amps DPIC switch of 500V grade with Fuse and Neutral on suitable T.W. board with painting of suitable color with PWD Earthling (SD No.136)

Supply and run of 2 of 4.0 sq.mm polythene insulated PVC sheathed heavy duty SC.Copper conductorof 1100 V grade on 7/20 GI bearer wire for service connection mains [SD NO.65]

Supply and run of 2X4 sq.mm (56/0.3) polythene insulatedPVC sheathed heavy duty SC.Copper conductor of 1100 V grade in 25mm dia GI pipe(Clss B) suitably bent on both ends with necessary Angle iron upright and end supportes for Mains SD NO 70

Supply and fixing of 40W flu.fitting complete with copper choke and condensor of 500 V with fuse and neutral(side handle ) on suitable T.W.box with earth connection only.SD NO 88

Supply and fixing of 1400mm AC ceiling fan complete of 300 V with fuse and neutral(side handle ) on suitable with earth connection only. SD NO 110

Supply and fixing of TNEB Meter board suitable for 32A single phase service connection with 32A fuse unit and neutral(side handle) on suitable of wall with earth connection only.SD NO 125

Provision for rainwater downfall pipe etc complete

Provision For Name Board

Provision for Photographic charges including all charges etc complete

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

THANGAMANI S