Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.0 LAccepted-AOC 12 53 CHOPASNI HOUSING BOARD JODHPUR 342 008 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L1 | Accepted-AOC REASONABLE RATE | |
| 2 | L2₹62.6 L+₹59,903.16 (0.97%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance QUOTED HIGH RATE | |
| 3 | L3₹67.8 L+₹5.8 L (9.36%)Rejected-Finance AA CLASS PWD CONTRACTOR DISTT BARMER | BARMER | RAJASTHAN | L3 | Rejected-Finance QUOTED HIGHER RATE | |
| 4 | L4₹68.2 L+₹6.2 L (9.98%)Rejected-Finance 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLAGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L4 | Rejected-Finance QUOTED HIGHEST RATE |
Tender Value
₹73 L
EMD Value
₹1.4 L
Closing Date
31 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AF Jaisalmer
AIR FORCE STATION JAISALMER 345001
PROVISION OF ROADS AROUND WSA IN TECHNICAL AREA AT AIR FORCE STATION UTARLAI
2023_MES_606702_1
80259
Open Tender
Civil Works - Roads
Item Rate
300 days
GE AF UTARLAI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
GE AF UTARLAI
₹1.4 L
Yes
8 Aug 2023
28 Jun 2023
2 Aug 2023
28 Jun 2023
31 Jul 2023
19 Jul 2023
30 Jun 2023 - 10 Jul 2023
Amount
Demolition of brickwork or stone/boulder masonry and precast block masonry for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified and directed.
Surface dressing in soft/loose soil not exceeding 15cm deep complete all as specified and directed.
Excavating over area in soft/disintegrated rock, not exceeding 1.5 m in depth and getting out complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with soft/loose soil or hard/dense soil complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
M&L for cement concrete (1:3:6) type C-2 using, 40mm graded stone aggregate, as in filling and mass concrete etc complete all as specified and directed.
Rolling and consolidating formation surfaces in cutting with 8 to 12 tonnes power road roller including filling in depressions which occurs during the process of rolling and rolling the surface to required camber and gradient complete all as specified and directed
M&L for 200mm compacted thickness GSB Grade-II laid over prepared sub grade compacted to required thickness complete all as specified and directed.
M&L for 150mm compacted thickness GSB Grade-II in two layers 75mm thick each, laid over prepared sub grade with stone aggregate including spreading, levelling and rolling by 80/100KN static wt roller and consolidated to required camber and gradient as per MORTH specifications complete all as specified and directed.
M&L for 100mm compacted thickness WMM Grade-I wet mix macadam, laid, compacted to required thickness, etc. complete all as specified and directed.
M&L for 75mm compacted thickness WMM Grade-I wet mix macadam, laid, rolled and consolidated to required camber and gradient as per MORTH specifications complete all as specified and directed.
M&L for preparing unsurfaced WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of grade VG-10 at the rate of 10 Kg per 10Sqm on unsurfaced WMM surfaces using Mechanical sprayer etc complete all as specified and as directed.
M&L for premix bituminous macadam (Consolidated thickness 75mm or less) using paving bitumen (VG-30) 4% by weight of total mix, spread, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) In case the binder contents by weight of total mix is less than 4% as per actual design mix, the price adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. If the total binder contents as per design mix is more than 4%, no price adjustment shall be made for the same. (ii) Job mix formula for premix bituminous macadam shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE.
M&L for applying evenly a priming/tack coat with bituminous primer of grade VG10 at the rate of 5 Kg per 10Sqm on unsurfaced WMM surfaces and including providing and laying 40mm consolidated thickness Bituminous Premix Semi Dense Asphaltic Concrete (SDAC) using paving bitumen VG-30 with 5.5 % binder by weight of total mix Rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) In case the binder contents by weight of total mix is less than 5.5% as per actual design mix, the price adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. If the total binder contents as per design mix is more than 5.5%, no price adjustment shall be made for the same. (ii) Job mix formula for Semi dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE. complete all as specified and as directed.
M&L for Reinforced Cement Concrete Design Mix M-30 grade as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for Reinforced Cement Concrete Design Mix M-30 grade using 20mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
M&L for Reinforced Cement Concrete Design Mix M-30 grade using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, (Horizontal or sloping) flat rought finished surface of concrete exceeding 200mm thick complete all as specified and directed.
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, (Horizontal or sloping) flat rought finished surface of concrete exceeding 200mm thick complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; (Horizontal or sloping) flat rought finished surface of concrete exceeding 200mm thick complete all as specified & directed.
M&L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, flat rought finished surface complete all as specified & directed.
S & F 10mm dia and over mild steel TMT bars , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
M&L for precast cement concrete block masonry in precast cement concrerte (1:3:6) type C-1 using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on surfaces of fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed
M&L for preparing newly plastered walls surfaces and applying one coat of cement base paint over one coat of alkali-resistant priming paint complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
M&L for preparation of new concrete surfaces as in road side kerbs and applying two coats of synthethic enamel paint of approved different tints and pattern over a coat of primer etc complete all as specified and directed.
GEMRARAMCONTRACTOR
M/S LAXMAN CONSTRUCTION COMPANY
M/S HARIOM CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
recovered-award.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .