Infrastructure Development of CHC Ruksin

Amount

SH : TYPE-IV QTR. Single Storied- 1 Unit., TYPE-II QTR.Triple Storied- 6 unit, Septic Tank- 2 Nos., Storm Water Drain- 326.00 Mtr.

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: (a) Foundations and plinth

Providing and laying cement concrete 1 : 2 : 4 (1 cement : coarse sand : 4 graded stone shingle 40 mm nominal size) excluding the cost of centring and shuttering in: a) Foundations and plinth

Providing and laying cement concrete 1 : 2 : 4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering. a) Foundations and plinth

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : (a) 1:1.5: 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. (b) (1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. (b)1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in shelves up to floor two level excluding cost of centering and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: (b)Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.

Centring and shuttering including strutting, propping etc and removal of form work for : (a) Foundation, footings, bases of columns etc. and mass concrete.

(b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

(c ) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

(d) Lintels, beams, girders, bressumers and cantilevers etc.

(e) Column, pillars, posts and struts etc.

Reinforcement of RCC work including bending, binding and placing in position complete. (b) Cold twisted bars.

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.

Extra for brick masonry in superstructure above plinth level and up to floor two level.

Steel work in built up tubular trusses i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted i/c special s shaped washer etc complete.

Welding by Electric plant

Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. (a) Total coated thickness 0.45mm Roofing Sheets

Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. (a) Total coated thickness 0.45mm Roofing Sheets

Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary aluminium butt hinges with necessary screws. a) 38 mm thick best available local wood, class - B I

Fabricating and supplying of steel window made of M.S. Z- section, flats welded together as per standard design and drawings being provided by the Engineer-in-charge i/c all the necessary fittings such as handle, holdfast (4 Nos), tower bolt, grill etc. and one coat of steel primer (Ref oxide) as per direction of Engineer-in-charge (This includes frame, shutter and grill).

Supplying and fixing glass panes with putty and nails including removal of broken glass panes where necessary. (b) Glass panes 3 mm thick and area 0.1 Sq.m. each

Providing and fixing flush door shutters, non-decorative type, core of black board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (b) 25 mm thick (for cupbaord) i/c nickel plated bright finished MS piano hinges with necessary screws.

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill.

Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone shingle 40 mm nominal size).

Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.

Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. (a) 300 x 16 mm

Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. (a) 125 mm

(Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. b) 250 x 10 mm

Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.

Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. (b) 50 mm thick

Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor. (a) 18 mm thick

Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. (a) Best local approved quality wood.

Extra for making chamfered edges of beading.

12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.

20 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

Providing and fixing soft wood 'EVE' board 25 mm thick and 225 mm wide including painting two coats complete as directed.

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.

Painting two coats with oil type wood preservative of approved brand and manufacture on new work.

Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Providing and fixing 40 mm dia GI Pipe outlet in cement mortar 1 : 3 (1 cement : 3 fine sand) including cutting and making good the wall.

Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).

Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). (a) 15 mm nominal bore

Providing and fixing brass bib cock of approved quality. (a) 15 mm nominal bore

Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore

Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. (b) Orissa Pattern WC Pan

Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. (a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.

Providing and fixing sand cast iron cast/iron (spun) soil, waste and vent pipes. (a) 100 mm dia

Providing and fixing sand cast iron heel rest sanitary bend. (a) 100 mm dia

Providing and fixing kitchen sink including making all connection excluding cost of fittings. (a) White glazed fire clay sink size 600x450x150 mm

Furnitures:- Wooden Cot

Cane Chair

Teapoy

Centre Table

Writing Table

Dining Table with Chair (4 Seater)

Wooden meat safe

Wooden Arm Chair

Mattress

Water Filter (10 ltr)

SH : ELECTRIFICATION

Proving 1.50 sqmm PVC insulated PVC single core copper conductor cable (91 meter per coil)

2.5 sqmm PVC insulated single core copper conductor cable

4 sqmm PVC insulated single core copper conductor cable

Providing black tape

5 Amp P/Type switch

Sunmica board 8" x 10"

5 Amp Socket with 5 Amp switch combined

PVC casing caping flat channel of size 1"

PVC (Elbow Tee & bent) 3/4" size

Screw 1-1/2"

CFL Bulb 20W

MCB D.B

T. P. & N main switch 100 AMP.

32 AMP single pole circuit breaker.

Fan clamp.

Celing Rose.

Hack saw blade ( 12 per packet ).

Earthing conduit wire 0.4 sqmm.

4' - 0", 40 w flouroscent light fitting with 40 w tube light.

A. C. Ceiling fan 1400 mm sweep complete with regulator etc as required.

Wiring for light Fan point/3 pin 5 amp/15 amp socket out let with 5 sqmm/2.5 sqmm/4 sqmm and 6 sqmm PVC copper/Al. wire i/c earthing and connection etc as required. The work is to be carried out by a qualified wire man ( job work only ).

M/s Aruni Hardware & Electrical