Construction of new FCS at Kadaladi

Amount

Clearing Juliflora jungle with uprooting

Earth work excavation for foundation and depositing on bank with an initial lead of 10m and initial lift of 2m in hard stiff clay, stiff block cotton , hard red earth, shales, murrams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil

Providing and placing in Position of Plain cement concrete 1:5:10 (one part cement, Five part fine aggregate & Ten part coarse aggregate) using hard broken stone aggregate of maximum nominal size of 40mm by mixer machine including dewatering the placement site, laying the concrete in layers and in bays ,compacting and finishing the surface with all leads and lifts watering curing to attain the profile and strength as specified for various depth and height and above ground level etc complete as directed by the Engineer in charge of work complying with the standard specification

Brick work in Cement Mortar 1:5 using best quality II class table mould chamber burnt bricks of size 83/4"X 41/4" x 23/4" for foundation and basement including curing etc complete complying with standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Plain Cement Concrete works for vertical angle footing etc complete as directed by the Engineer in charge of Work complying with the standard specification

Cement Concrete 1:2:4 (One Cement, 2 sand and 4 broken stone Jelly) using 20mm size hard broken stone jelly including cost of centering charges placing and laying the concrete in layers, compacting and finishing the surface with all leads and lifts watering curing to attain the profile and strength as specified for various depth and height and above ground level etc complete as directed by the Engineer in charge of work complying with the standard specification.

Plastering in Cement Mortar 1:5, 12 mm thick etc. complete complying with standard specification

Supplying and Fixing MS angle of size 50 x 50 x 6mm

Supplying and fixing chain link fencing 5 cm x 5 cm x 10 gauge providing the MS Flat of size 20x3 mm at top including the cost of binding wire but excluding the cost of MS Flat etc. complete as per the direction of the Engineer-in-charge

Providing MS Flat of size 20x3 mm on top of chain link fencing

Supplying and fixing of MS Grill Gate using MS angle and MS square rods including priming coat

Painting new iron work with two coats for doors, Windows, Ventilators with Synthetic Enamel Paint of approved color and quality etc complete.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Providing supplying and erection of steel Name Board of size of 1.20 x 0.90 m with 50 mm dia GL pipes of length 3.00m as supporting structure including two coats of enamel painting and lettering conveyance and fixing at site etc complete

Providing supplying and erection of steel indication board of size 20”x5” 18 gauge with 3’ height mounting rod (Total Weight 1.5kg/1No) including painting and lettering etc, and including conveyance and delivery charges to the site etc.

S.MADHESWARAN

KAMESWARAN