Estimate for maintenance and Repair Work of Nandgarh Rest House.

Amount

Dismantling brick work tile, masonry or tile lining.(8.5 b)

PCC 1:4:8 with Stone aggregate 40 mm gauge using concrete mixer volume metric type. (10.11 b ii)

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. (11.7)

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (11.8)

12.5 mm thick cement plaster 1:4.(15.9)

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines.(10.27)

(c) CPVC SDR 11 Pipe & fitting 25mm o/d

(b) SDR 11 CPVC pipes & fittings 20mm o/d

Dismantling glazed tiles (to be carefully removed).(8.35)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).14.113 a size 600 mm x 600 mm.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200 m, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 14.125

(a) Woolen Blanket

(d) Window Curtains

(a) Sofa Set

(d) Bed sheet double

(e) Pillow cover

(f) Towel

(n) Window Curtains

Cleaning of glass panes both sides. 31.26

( c ) Recovering easy of sofa chair with cloth

Cleaning of switch boards. (Market Rate) 31.28

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish.(16.65)

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (16.63)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade.(16.13)

Spirit polishing one coat in old wood work.(16.46)

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work.(16.21)

Applying priming coat with metal primer on new steel or iron work including preparation of surface.(16.20)

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.(16.15)

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint..(16.18)

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 35 mm thick 1973 17.27 b (iv)

Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf) 17.17 ii (a) 35mm thick

Kail wood doors shutter and window shutter panelled, glazed or glazed and panelled including hinges screws chokes cleats and cords etc. complete Fixed in position (Single Leaf) (17.17 i a 40 mm thick)

Providing cement pots at site of work, filling 2/3rd volume with mixture of good earth and screened manure and cocopeat in the ratio 2:1:1.(32.38) ( e ) 60 cm size of pots

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm (17.22 ii)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete in all respects.(17.43)(a) ISI designation no I (Size of door up to 700mm)

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. 14.138

BABLA CONSTRUCTION CO (BID ID -614902)

THE NEW NATIONAL CO-OP. L&C SOCIETY LIMITED (BID ID -614909)

The Jodhpur Pakhar Co Op L and C Society Ltd. (BID ID -614898)