SPECIAL REPAIRS TO FOUNTAIN LINE JCO ACCN AT DSSC WELLINGTON

Amount

Dismantling wooden boarding, any description,fixed with screw complete all as specified and as directed.

M&L for Hardcore of broken stone aggregate of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type D-2, using 40 mm graded crushed stone aggregates as in foundation, filling and mass concrete etc, complete all as specified and as directed

M&L for ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate, 30 mm thick, as in flooring finished even and fair to receive top layer complete all as specified and as directed.

M&L for cement concrete1:3:6 type C-2 using 40mm graded stone aggregate 75 mm thick, as in Plinth protection/and pavings finished even and fair without using extra cement complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing), removing serviciable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for joint free anti - skid Ceramic tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for joint free anti - skid Ceramic tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles of size 300x600, 8 to 10 mm thick as in vertivcal surfaces ofbathrooms, toilets etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:3 complete all as specified and as directed.

M&L for granite (of any type) slab, 18 to 20mm thick maching cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment of match to shade of granite stone including grinding and polishing, and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc. complete all as specified and as directed.

Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and as directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for Rendering 15mm thick in cement mortar 1:4 mixed with WPC (external surfaces of wall) on fair face of stone /brick wall sufraces, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperately.

M&L for Rendering 10mm thick in cement mortar 1:6 (internal surfaces of wall) on fair faces of stone/brick wall surfaces, finished even and smooth with out using extra cement complete all as specified and as directed.

Supply only liquid integral water proofing compound (200ml per cement bag consist of 50kg) complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beam, beam haunchings, griders, bressummers, lintels,cantilivers,shelves including supports,overhangs,etc.also splays between floors and beams complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers,lintels, shelves slab over 1.5m span complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

As per item no 23, but for 5mm dia and over in stirupps, spaces and binders complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces with two coat of wall care putty and applying two coat of acrylic emulsion piant over a coat of acrylic primer complete all as specified and directed.

M&L for preparation of newly plastered external wall surfaces and applying two coats of acrylic emulsion exterior paint (weather coating) over a coat of primer complete all as per manufactured instructions and as directed.

M&L for providing gypsum board false ceiling 10-12mm thick fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200 c/c, main and inter connected channel shall be fixed through fasterners clips as per manufacturers instructions with and including plaster of paris decorative type cornice all around at the junction of wall and ceiling etc complete all as specified and directed.

M&L for Preparing false ceiling surfaces, applying one coat of smart care primer (Primer cum sealer) and applying two coat of emulsion paint of approved colour by roller complete all as specified and as directed.

S&F for MS fancy type decorative drophery rod 25mm dia including side caps and single/double brackets, as in repairs including end bushes complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore pipes complete all as specified and as directed.

M&L for tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling 15mm bore including taking up/down steel tubing and connections including chasing cutting concealed piping to walls, floors etc complete all as specified and as directed.

M&L for tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling 20 mm bore incl taking up/down steel tubing and connections including chasing cutting concealed piping to walls, floors etc complete all as specified and as directed.

Dismantling of PVC or reinforced cement concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors 75 mm mm dia complete all as specified and as directed.

S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors 110 mm mm dia complete all as specified and as directed.

S&F PVC (SWR) bends with or without access door any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends with or without access door any radius 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap plain with grating incl. jointing with solvent cement (100 mm bore) complete all as specified and as directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F Kitchen plate rack made of stainless steel 0.80mm thick sheet, standard size 900x900x250mm and design as approved by GE and fixed to wall with wooden plug and screw, (fixed in repair), complete all as specified and directed by Engr-in-charge.

S&F Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, complete all as specified and directed.

S&F in repair wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower) Cat No CON-281KN Make - Jaquar or equivalent in Hindware/Cera/Parryware all as specified and directed by Engr-in-Charge

S&F Bib tap, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe, 15 mm bore (fixed in repair), complete all as specified.

S&F Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe 15 mm bore (fixed in repair), complete all as specified.

S&F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union (fixed in repair), complete all as specified and as directed.

S&F 20 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repair), complete all as specified.

S&F PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified.

S&F brass chromium plated shower rose 125 mm size, with or without swivel joints, including shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or union complete all as specified and directed.

M&L for Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe (fixed in repair), complete all as specified.

S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and as directed.

M&L for Viterous china, wash hand basin, (white) of size 550 mm x 400 mm including PTMT waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified

S&F in repair 15mm dia Angular stop cock with wall flange all as specified and directed by Engr-in-Charge

S&F in repairs corner racks with glass with brass brackets chromium plated railings complete all as specified and as directed.

Dismantling timber scantling 40 Sqm.cm and over in section in any position ( unframed/framed work ) complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting in two layers, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M&L for pre-painted Galvalume aluminium Zinc cooating GI based steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

M&L for plain cemet concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregates as in coping, cills, steps, in lintels upto 1.5m clear span and similar other works like bands, plinth courses, lacing courses, bed plates, water troughs and the like incl weathring, slightly rounded or chamfered angles and throating, incl necessary form work, complete all as specified and directed by Engr-in-Charge.

M & L 2nd class Hard wood decorative Weather boarding, wrought, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and as directed.

Taking down chowkhats or frame nexc 1.5 Sqm each without taking off shutters from frame, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n exc 4 Sqm each without taking off shutters from frame, complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but not exc 2Sqm Each etc. complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section, 150 mm long, (fixed in repair) complete all as specified and as directed.

S&F Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia, 100mm size, (fixed in repairs) complete all as specified.

S&F Aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and as directed.

S&F Butt hinges100mm , medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F second class hardwood plain,solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.complete all as specified and as directed.

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for Glazed and skeleton shutter 35mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of me-mbers of shutters as specified in SSR Part I, Section8, clause 8.24 (a) supplied and fitted to chowkats.complete all as specified and as directed.

S&F Stainless steel wire cloth of 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Tinned Tacks or wire staple as directed by Engineer in Charge.

M&L for MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and as directed.

BLANK

BLANK

S&F Aluminium barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

S&F Aluminium, sliding door bolt 300 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

M&L for Complete removal of existing painting from the wooden joinery and sanding/preparing the old wood surfaces and applying two coat of Synthetic enamel over a coat of a primer etc including providing half round/bevelled edge teak wood, fillets at glazing/wire mess sectional area not exceeding 2 Sqcm etc, complete all as specified and as directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L Prelaminated particle board exterior grade 18/19mm thick prelaminated one side with decorative choice lamination one side and balancing white or other side fixed with screw with timber frame including Teak wood lipping, complete all as specified and as directed.

S&F continous piano hinge mild steel bright finish or electrogalvanised. (30mm width of flaps) complete all as specified and as directed.

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of brass bright finished complete all as specified and as directed.

M&L for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F mild steel small articles like bands, straps, supports or stays for rainwater pipe/gutter ventilating pipes, including bolts etc conforming to Fe-290 Gde -165 all as specified and directed by Engr-in-Charge

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work congorming to Fe-290 Gde E 165 all as specified and directed by Engr-in-Charge

M&L for Hollow section steel windows with side hung shutter including friction hinges with steel handle and two No 100mm mild steel bolts and two peg stays on each opening shutter complete with glazing bars dove tailed or welded including a shop coat red oxide of zinc chrome primer complete all as specified and as directed.

All as per item no 89 above but without glazing bar including flat iron stiffener and suitable size nuts, bolts but without peg stays complete all as specified and as directed.

M&L for preparing new surfaces of steel over 10 cm width or girth not otherwise specified and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.

M&L for Pre polished Coloured chequered cement concrete tiles, machine pressed, factory made of size 300 x 300 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, not exceeding 1.50m wide and not exceeding 1.50m in depth, for foundation etc complete all as specified and as directed.

Removing surplus excavated soil to a distance n.exc 50mtr depositing where directed complete all as specified and as directed.

Returning filling in soft/loose soil including spreading, leveling watering & well ramming in layer not exc 25cm thick complete all as specified and as directed.

M&L for Plain cement concrete, type D-2 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and as directed by Engr-in-Charge.

M&L for precast cement concrete block masonry with soild blocks exc 10cm in width and setting in CM 1:6. complete all as specified and as directed.

S&F mild steel framed work such as gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work congorming to Fe-290 Gde E 165 all as specified and directed by Engr-in-Charge

M&L for plain cement concrete type-C2 1:3:6 (40mm garaded agg.) in surface channel and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete, all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed.

M&L walling of random rubble uncousred well bounded bedded and solidly hearted built in CM 1:4 and pointed the dressed surface with same mortar as the work process complete all as specified and as directed.

M&L flush pointing to random rubble masonary (newly constructed) uncoursed brought up to courses in CM 1:4 complete all as specified and as directed.

S&F UPVC (SWR) pipes 100mm bore, single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

M&L loose filling with aggregate broken stone or boulder of gauge 40mm to 80mm in weep holes complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm granite or trap stone complete all as specified and as directed.

Taking down old, unserviceable aluminium point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as directed by Engr-in-Charge.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Disconnecting/dismantling of old existing un serviceable DB's any way 240/415 Volts with their old/unserviceable burnt MCB's complete all as specified and as directed.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and includinguding non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & including provn of modular boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with includinguding cutting chases for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed for the following : Make : Havells/Finolex/Polycab or techno-commercially equivalent. NOTE: 1.) Cutting chases and making good the disturbed surfaces is includinguded in the unit quoted rates. 2.) Modular boxes shall be measured and paid separately.

(a) One light/fan/call bell point controlled by one switch complete all as specified and as directed.

(b) One 5 amps 5 Pin socket outlet on same board complete all as specified and as directed.

(c) One 5 amps 5 Pin socket outllet on independent board complete all as specified and as directed.

M & L for concealed point wiring with two single core 2.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and includinguding non- metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including provision of 2.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & including provn of modular boxes of appropriate size & thickness fixed flush to wall for housing 15/16 Amps switch-socket outlets etc. on independent board complete all as specified and as directed . Make : Havells/Finolex/Polycab or techno-commercially equivalent. NOTE: 1.) Cutting chases and making good the disturbed surfaces is includinguded in the unit quoted rates. 2.) Modular boxes shall be measured and paid separately.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 6.0) sq. mm + (1 x 6.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cables drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make : Havells/Finolex/Polycab or techno-commercially equivalent NOTE : 1.)Three runs of wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2.) Cutting chases and making good the disturbed surfaces is included in the unit quoted rates. 3.) Modular boxes shall be measured and paid separately.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.0) sq. mm + (1 x 4.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single cores cable drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make : Havells/Finolex/Polycab or techno-commercially equivalent NOTE : 1.) Three runs of wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2.) Cutting chases and making good the disturbed surfaces is included in the unit quoted rates. 3.) Modular boxes shall be measured and paid separately.

S&F Modular type socket out let 2 in 1, 6/16 Amps, 2 module all as specified and as directed. Make : Cat No ACVKCWW163 Verona of Crabtree (Havells) or techno-commercially equivalent.

S&F Modular type switch single pole ,16 Amps one way, 1 module all as specified and as directed. Make : Cat No ACVSXXW161 Verona of Crabtree (Havells) or techno-commercially equivalent .

S&F Modular type switch single pole, 6 Amps one way, 1 module complete all as specified and as directed. Make : Cat No ACVSXXW061 Verona of Crabtree (Havells) or techno-commercially equivalent

S&F Modular type socket out let, 6 Amps 2/3 pin combined, 2 module complete all as specified and directed. Make : Cat No ACVKSWW065 Verona of Crabtree (Havells) or techno-commercially equivalent.

Supply & Fixing switch bell push modular type, 10 Amps, single pole, one module complete all as specified and as directed.Make : Cat No ACVSBXW101 Verona of Crabtree (Havells) or techno-commercially equivalent .

Supply and Fixing call Bell, AC, Ding Dong type 230 Volt complete all as specified and as directed. Make :Anchor Cat No 8272 or techno-commercially equivalent.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of following modules complete all as specified and as directed. .NOTE: The make of modular metal flush boxes should be same as that of switches/ sockets.

(a) 1/2 Module

(b) 3 Module

(c) 4 Module

(d) 6 Module

Supply & Fixing modular cover plate suitable for fixing switches/sockets of following modules complete all as specified and as directed.. NOTE : The make of modular cover plates should be same as that of switches/ sockets.

(a) 1/2 Module

(b) 3 Module

(c) 4 Module

(d) 6 Module

S & F ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts, ISI marked complete all as specified & as directed. Make: Havells/CG/Anchor or techno-commercially equivalent.

S&F ultra slim elegance LED lighting fixture with extruded AL heat sink, 20 W, 4ft Energy efficient and environmental friendly including electric connection with twin/ three core flexible copper cable with and including flexiable hose pipe from ceiling rose to fittings complete all as specified and directed by the Engr-in-charge. Make : Havells, Cat No : ENDURALINEARNEOBS20WLED865SPCWH or techno-commercially equivalent.

S&F Compact & sturdy LED decorative fixture( 10 W) with extruded heat sink, multi purpose lighting in replacement of 2ft FTL fittings including electric connection with twin/ three core flexible copper cable with and including flexiable hose pipe from ceiling rose to fittings complete all as specified and directed. Make : Havells, Cat No: ENDURALINEARNEOBS10WLED865SPCWH or techno-commercially equivalent.

S&F wall mounting Decorative fixture SS finish with opal glass diffuser with and including 5 W warm white LED lamps of E14 Cap complete all as specified and as directed. Make : Havells Cat No LHJE01106499( for fixture), or equiv in Philips/Luker. Cat No: Make:Havells, LHLDEROEMD8X003 (for lamps) or techno-commercially equivalent.

Supply and fix energy saving new generation 10 W LED, bulk head luminaire with opal diffuser with and including lamp LED 6000K complete all as directed. Make: Havells Cat No RUGBYNEONFT10WLED860SSYMTOPC or techno-commercially equivalent.

S&F LED light fittings of 25 W rating, 6K colour temperature with IP 66 protection. Fixing to the wall using suitable GI bracket, GI pipe and nut bolts, making connections from ceiling rose etc including electric connection with twin/ three core flexible copper cable with and including flexiable hose pipe from ceiling rose to fittingscomplete all as specified and as directed.Make:Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPC or techno-commercially equivalent.

S&F fan exhaust,single phase,250mm sweep, PVC body with their all accessories fixed properly on window/ stone wall surfaces of thickness not exceeding 50cm including making proper sized exhaust hole of 250 mm dia, Louver Shutter suitable for the same exhaust fan and which shall easily be operated with exhaust air pressure. Any disturbed surfaces of wall shall be made good by cement work/plastering and matching by existing colour white/colour wash including removing of old exhaust fan and connecting/testing including electric connection with twin/ three core flexible copper cable with and including flexiable hose pipe from ceiling rose to fittingscomplete as directed.Make: Havells ,Code: Venti Air-DX white or techno-commercially equivalent.

S & F single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB "C" curve of 20 A rating complete all as directed.Make:Legrand/Havells/C&S or techno-commercially equivalent

Supply, Installing and Testing Vertical type Storage electric water heater (Geysers) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation,2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated including multifuntion safety valve and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and directed by the Engr-in-Charge. Make: Havells Cat No: GHWAMGTWH025 (Monza DX) or techno-commercially equivalent. Note : (i)Installed Geyser's warrenty card duly signed by the user should be submitted to the Engr-in-Charge (ii) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate. (iii) Old unserviceable geyser to be returned to MES Store.

S & F MCB, DB, TPN, 4 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed by Engr-in-Charge.Make: Havells, Cat No: DHDNTHODDW04 or techno-commercially equivalent. NOTE : The MCCB and MCB's shall be paid separately under relevent items.

S&F MCB TPN, 63A rating, 415Volts, 10 KA `C' Series all as specified and directed by the Engr-in-Charge. Make: Havells Cat No: DHMGCFPF063 or techno-commercially equivalent.

S & F Sheet metal enclosure for 8 way DBs double door type 240 volts, 200 Amps rated basbar including necessary connection complete all as specified and as directed.Make: Havells,Cat No- DHDNSHODDW08 or techno-commercially equivalent.

S & F Sheet metal enclosure for 4 way DBs double door type 240 volts, 200 Amps rated basbar including necessary connection complete all as specified and as directed.Make: Havells,Cat No-DHDNSHODDW04 or techno-commercially equivalent.

Supply and Fixing Miniature circuit Breakers, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and as directed. Make: Havells,Cat No- DHMGCSPF006-032 or techno-commercially equivalent.

Supply and Fixing Miniature circuit Breakers, SP&N, C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and as directed.Make:Havells,Cat No- DHMGCSNF006-032 or techno-commercially equivalent.

Supply and Fixing Miniature circuit Breakers, SP&N, C-Series 240 Volts of capacity (40 Amps) as ordered breaking capacity 10 KA complete all as specified and as directed. Make:Havells, Cat No- DHMGCSNF040 or techno-commercially equivalent.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion incl taking down old earthing complete complete all as specified and as directed.

GMS Builders

sree devi construction