Construction of Annexe Building, Students Hostel, Expansion of Dining Hall, Site Grading and Retaining wall etc. at Indian Institute of Management Shillong, Meghalaya

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

Total of BoQ 3, BoQ 4, BoQ 5 and BoQ 6

Total Amount of BoQ3 (Item Rate)

Total Amount of BoQ4 (Percentage Rate)

Total Amount of BoQ5 (Percentage Rate)

Total Amount of BoQ6 (Percentage Rate)

Description of Work / Item(s)

Amount

Schedule - (E) Bill of Quantites for Non Schedule Items (MR ITEMS) (Civil and Electrical)

NS 1-Supplying and applying Anti termite treatment with providing chemical (Imidaclprid 30.5 SC) shall be used at 0.075% concentration (2.1 ml of chemical mixed in 1 ltr of water OR in other words mixing ratio of chemical to water is 1:475) with water by weight at the rate of 5 Liters per sq. m.of the surface before sand bed is laid. (For top surface of the consolidated earth at plinth holes upto 50 mm. to 75 mm. deep at 150 mm. center to center both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil and also to the Foundation bed ,Basement excavation, back filling Vertical side, Plinth & extended portion ,Soil Surrounding Pipes, Wastes and Conduits, special care at below construction joints, beneath Junction of the Wall and the Floor etc. with the chemical as above) .The work should be carried out as per specification described in para 6.4 of code IS-6313 (part-2&3) 2013 by a specilised agency duly preapproved. (Mode of measurement will be per Sqm of Plinth area of the Building as per Drawing.)

NS 2 - Providing and fixing at all heights and depths 50 MM thick premoulded joint filler board for expansion joint having minimum density 95kg./ cum, Non standing with less than 1% water absorption and compression recovery of 93% minimum as per manufactured specification including cost and conveyance of all materials, cutting and placing to the required size, labour charges, sundries, wastage etc. at all levels complete as per drawings and as direction and satisfaction of Engineer-in-charge.

NS 3 -Supplying, laying and fixing of std. chicken wire mesh flexible galvanized steel wire with hexagonal gaps. Available in 1 inch (about 2.5 cm) diameter, wire gauges 19 gauge (about 1 mm wire) to 22 gauge (about 0.7 mm wire). in positions at junctions of concrete & masonry works all complete as per specification, drawing and instructions of the Engineer in charge.

WOOD WORK (price range indicated for basic material should have allowed variation of price upto 5%)

NS 4 -Providing & fixing Stainless steel Fastener Bolt (10mmx 120mm) for Door Frame fixing complete in all respect.

NS 5- Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:(a) 35 mm thick including fixing with butt hinges with necessary screws. (Butt hinge paid in separate items)

NS 6- Supplying SS Butt hinge with Square edge, 8 nos. zigzag screw hole & SS finish pintype Butt Hinge (Reference price range Rs. 175 per piece) 125mm x 65mm x 2.5mm (Minimum) including necessary size SS Screw as per approved make

NS 7- Providing and fixing SS (Grade 304) pull handle of approved design/Type with necessary screws etc. complete in all respect

NS 7.1- SS finish Mortise handle type/ any shape as per approved design (Reference price range Rs. 2070/- per pair 300mmx22mm or equivalent)

NS 7.2- SS finish Mortise handle type/ any shape as per approved design (Reference price range Rs. 1930/-Per pair 250mmx22mm or equivalent)

NS 8- SS finish Mortise handle type/ any shape as per approved design (Reference price range Rs. 1760/- per pair 200mmx22mm or equivalent )

NS 9- Providing and fixing SS (Grade 304) Mortise Dead Lock without handle operated one side key & otherside knob with cylinder , Lockbody, Key head and Left & Right operation of approved design/Type with necessary screws etc. complete in all respect :

NS 9.1- SS finish Lock with Minimum 3 keys (Reference price range Rs. 2080/--per no. for Lock body, Cylinder & Master Key )

NS 10- Providing and fixing SS (Grade 304) hanging floor door stopper of superior quality with necessary screws etc. complete in all respect:

NS 10.1-Door mounted hanging type Door stopper (Reference price range Rs. 322/-per no.)

NS 11- Providing and fixing stainless steel Tower bolt of superior quality(Grade-304) with nuts and screws etc. complete in all respect:

a) 450x10 mm (Reference price range Rs. 528/- per no.)

b) 250x10 mm (Reference price range Rs. 279/- per no.)

NS 12- Providing and fixing SS (Grade 304) Aldrop of approved design with necessary nuts & screw etc. complete in all respect.

a) 16mm dia boltx300 mm long (Reference price range Rs. 1990/- per no.)

b) 16mm dia boltx250 mm long (Reference price range Rs.1590/- per no.)

c) 16mm dia boltx200 mm long (Reference price range Rs.1430/- per no.)

NS 13 -Providing and fixing Rubber /PVC buffer (Reference price range Rs. 37/- per no.) of required size and of approved quality with necessary screws etc. complete in all respect

NS 14 - Providing and fixing Magic eye (Reference price range Rs. 371/- per no.) complete in all respect

NS 15 -Providing and fixing Door Closer SS finish upto 80kg including necessary fixture, screw etc. (Reference price range Rs. 3850/- per set.) complete in all respect

NS 16 -Providing and fixing Soft close sliding system for framed wooden flush door of approved make including necessary top track of required length, accessories, fixture, screw etc. (Reference price range Rs. 4390/-for sliding system with Accessories + 6700/- for top track per set.) complete in all respect .

NS 17 -Providing and fixing SS Door Handle with Lock for sliding flush door of approved make including necessary fixture, screw etc. (Reference price range Rs.580/-for Handle + 3190/- for Lock per set.) complete in all respect .

ALUMINIUM DOORS, WINDOW WORK: (price range indicated for basic material should have allowed variation of price upto 5%)

NS 18 - Supply and fixing Dash fastener as per required sizes for fixing of Door & Window aluminium Frame.

NS 19 - Providing and fixing glazing with required EPDM rubber / neoprene gasket etc. For window glazing:- With coloured toughened glass panels of 8.0 mm thickness (ST 467 of Saint Gobain or equivalent) having Visible Light Transmission (VLT) of 54.0 to 56.0 %, External reflection 14.0 to 21.0 %, Internal reflection 18.0 to 27.0 %, Solar factor 0.40 to 0.60, Shading Coefficient 0.50 to 0.60 and U-Value (W/sq. .m. K) 3.00 to 5.62. Rate include additional aluminium sections, friction hinges, handle, safety chain and other accessories as applicable.

NS 20 - For Door shutter & other portion:-Providing Toughend glass panes of 10.0 mm thickness of Saint Gobain or equivalent .

NS 21- Providing and fixing glazing with required EPDM rubber / neoprene gasket etc. For Window glazing:-Providing Toughend glass panes of 6.0 mm thickness. ST 467 of Saint Gobain or equivalent having Light Transmission 54.9%,External reflection 14.3%,Internal reflection 18.3%,Solar factor 0.57, Shading Coefficient 0.57 , U-Value (W/sq.m.K) 5.62.

NS 22- Design, supply fabricate and fixing Semi Utilized Structural Glazing system with single glazing 8mm thick toughned of approved colour & sample (ST 467 AND ST 436 OF SAINT GOBAIN OR EQUIVALENT) securely bonded to framework to ensure absolute water tightness, with profile either straight or segmented curve in plan consisting of main panel work of Mullions and Transoms made out of specially designed extruded aluminium section having 15-20 Micrones Anodized in approved colour. Fixed at all levels,elevation and heights to the RCC elements with necessary clamps,brackets and anchor fasteners, made of shall be Mild steel Hot Dip galvanized with washer and shall confirm to IS : 4759 -1996. All gaskets shall be EPDM with all necessary flashing,floor seal,smoke seal, sealents etc. to make system fully weather and sound proof & water tight. Proposed glazing should be bonded to frame by mean of Structural sealant of Dow corning 995 and weather sealant shall be Dow Corning 789. All spacer tape should be Nortan or equivalent etc. complete with fixing inclusive of all hardware supply , fixing ,Glass will be paid in this Glazing items.

NS 22.1 - For Vision area:-With coloured toughened glass panels of 8.0 mm thickness (ST 467 of Saint Gobain or equivalent) having Visible Light Transmission (VLT) of 54.0 to 56.0 %, External reflection 14.0 to 21.0 %, Internal reflection 18.0 to 27.0 %, Solar factor 0.40 to 0.60, Shading Coefficient 0.50 to 0.60 and U-Value (W/sq. .m. K) 3.00 to 5.62. Complete in all respect including frame, glass & necessary hardwares as per approved shop drawing and direction of the Engineer - in - charge.

NS 22.2 - For Spandral area:-With coloured toughened glass panel of 6.0 mm thickness (ST 436 of Saint Gobain or equivalent) having Visible Light Transmission (VLT) of 30.0 to 56.0 %, External reflection 16.0 to 19.0 %, Internal reflection 17.0 to 27.0 %, Solar factor 0.35 to 0.50, Shading Coefficient 0.40 to 0.55 and U-Value (W/sq. .m. K) 5.40 to 3.3. Complete in all respect including frame, glass & necessary hardwares as per approved shop drawing and direction of the Engineer - in - charge.

NS 23 - Supplying and fixing Hinges/ Staying Hinges for Aluminium Door & Windows of approved quality all complete as per drawing or as directed. (Reference price range Rs. 175/-Per each)

NS 24 - Supplying and fixing Handle with Lock for Aluminium Casement Windows Left & Right operation all complete as per drawing or as directed. (Reference price range is Rs. 200/-)

NS 25 - Supplying and fixing Handle with Lock for Aluminium Sliding Windows all complete as per drawing or as directed.(Reference price range Rs. 120/-)

NS 26 -Supplying and fixing aluminium Louvers (fixed type) of approved integrated anodised ( matt finished 15 micron thick) extruded sections . all complete as per drawing or as directed.Minimum weight 8 kg / sqm.

NS 27 -Providing & Fixing H-type Door Pull Handle for Glass/Aluminium Door Shutter.32mm dia X600mm overall Length, material SS 304, SS finish with necessary screw etc. complete in all respect. (Reference price range Rs 3940/- per pair)

NS 28 - Providing & Fixing Lock for Glass Door Shutters Body & SS finish, with necessary screw etc. complete in all respect. (Reference price range Rs.2059/- per no.)

NS 29 - Providing & Fixing Patch Fittings of approved make as per drawing & Design complete in all respect.

NS 29.1 -Wall to glass clamping Patch (Reference price range Rs.1090/-)

NS 29.2 - Ceiling to glass clamping Patch (Reference price range Rs. 1090/-)

NS 29.3 - Glass to glass clamping Patch (Reference price range Rs. 1430/-)

NS 29.4 -Top Patch (Reference price range Rs. 1900/-)

NS 29.5 -Bottom Patch (Reference price range Rs.1900/-)

NS 29 .6 -Pivot (Reference price range Rs. 385/-)

NS 29.7 -Over Panel Side Panel Connector (Reference price range Rs. 2890/-)

NS 29.8 - Stainless steel Channel for Holding Glass (Reference price range Rs. 1160/- per 3 ft.)

NS 30 - Providing and fixing Floor Spring upto 120 kg door weight including top & bottom pivot, necessary accessories, screw etc. complete in all respect

NS 30.1 -For Aluminium Door (Reference price range Rs. 5175/- per set.)

NS 30.2 - For Glass Door (Reference price range Rs 5175/- per set.)

STEEL WORK (Metal door)

NS 31 - METAL(MS) DOOR :-Supplying and fixing 30mm/35mm thick (at any level) Factory made MS non fire rated Door Shutter having 1.2 mm thick sheet bothside, C channel supported by sufficient stiffner as per drawing with door Frame of Pressed Galvanized steel confirming to IS 277 having 1.6mm thick sheet including Transfer grill,vision panel, finishing with paint over primer fittings & fixture and including all necessary Hardware ,as per Drawing & Design with the direction of Engineer in Charge complete in all respect. (Sample of each Door Should be approved before procurement)

NS 31.1 -30mm thick Metal Door SIZE 1500MM(W)X2250MM(H) Double Shutter, frame Including MS Hardware.(8nos. 100mmx75mmx3mm MS Butt Hinge, 2nos.250mm Long D-Type MS Handle Fabricated MS 16mm dia ROD, 1 no.250mm MS Aldrop, 1 no.300mm MS Tower Bolt, 200x500mm Vision Panel with 4mm thick Glass as per Drawing Finished painted as per approved colour) complete in all respect.

NS 31.2 -30mm thick Metal Door SIZE 1500MM(W)X1950MM(H) Double Shutter, frame Including MS Hardware.(8nos. 100mmx75mmx3mm MS Butt Hinge, 2nos.250mm Long D-Type MS Handle Fabricated MS 20mm dia ROD, 1 no. lock, as per Drawing Finished Red painted ,300x500mm Vision Panel with 4mm thick Glass complete in all respect.

NS 31.3 -35mm thick Metal Door SIZE 1200MM(W)X2100MM(H) Single Shutter, frame Including MS Hardware.(4nos. 100mmx75mmx3mm MS Butt Hinge, 2nos.250mm Long D-Type MS Handle Fabricated MS 20mm dia ROD, 1 no.250mm MS Aldrop, 1 no.300mm MS Tower Bolt, Vision panel 300x500mm 2 nos. 4 mm thk glass as per Drawing Finished painted as per approved colour) complete in all respect.

NS 31.4 -30mm thick Metal Door SIZE 1500MM(W)X2250MM(H) Double Shutter, frame Including MS Hardware.(8nos. 100mmx75mmx3mm MS Butt Hinge, 2nos.250mm Long D-Type MS Handle Fabricated MS 16mm dia ROD, 1 no.250mm MS Aldrop, 1 no.300mm MS Tower Bolt, as per Drawing Finished painted as per approved colour), with Transfer Grill complete in all respect.

NS 31 .5 -35mm thick Metal Door SIZE 1000MM(W)X2100MM(H)single Shutter, frame Including MS Hardware.(4nos. 100mmx75mmx3mm MS Butt Hinge, 1no.250mm Long D-Type MS Handle Fabricated MS 20mm dia ROD, 1 no.250mm MS Aldrop, 1 no.300mm MS Tower Bolt, as per Drawing Finished painted as per approved colour) complete in all respect.

NS 31.6 -35mm thick Metal Door SIZE 1200MM(W)X2100MM(H) Double Shutter, frame Including MS Hardware.(8nos. 100mmx75mmx3mm MS Butt Hinge, 4nos.250mm Long D-Type MS Handle Fabricated MS 16mm dia ROD, 1 no.250mm MS Aldrop, 1 no.300mm MS Tower Bolt, as per Drawing Finished painted as per approved colour) complete in all respect.

NS 31.7 -35mm thick Metal Door SIZE 1000MM(W)X2100MM(H) Single Shutter, frame Including MS Hardware.(4nos. 100mmx75mmx3mm MS Butt Hinge, 2nos.250mm Long D-Type MS Handle Fabricated MS 16mm dia ROD, 1 no.250mm MS Aldrop, 1 no.300mm MS Tower Bolt, as per Drawing Finished painted as per approved colour) complete in all respect.

NS 31.8 -30mm thick Metal Door SIZE 1500MM(W)X1200MM(H) Double Shutter, frame Including MS Hardware.(8nos. 100mmx75mmx3mm MS Butt Hinge, 2nos.250mm Long D-Type MS Handle Fabricated MS 20mm dia ROD, 1 no. lock, (as per Drawing Finished, as per approved colour) complete in all respect.

NS 32 - Fire rated Door Frame:-Fire Door frame 2hrs FIRE RATED shall be double rebate profile made out of 1.60mm minimum thick galvanized steel sheet with fire retardent primer and paint. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening.

NS 33 - Fire rated Door Shutter-Fire Door DOUBLE/SINGLE leaf 2hrs FIRE RATED shall be 46mm thick fully flush double skin door with vision fire retardent glass. Door leaf shall be manufactured from 1.2mm minimum thick galvanised steel sheet with fire retardent primer and paint. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per drawing & design with a beading and screws from inside. The glass should be 6mm clear borosilicate fire rated glass of relevant rating of the door. (GLASS PANEL, HARDWARE WILL BE PAID IN SEPARATE ITEM.

NS 33.1 -FOR DOOR SIZE- 1500MM(WIDTH)X2400MM(HEIGHT) Double Leaf Shutter

NS 33.2 -FOR DOOR SIZE- 1200MM(WIDTH)X2400MM(HEIGHT) Single Leaf Shutter.

NS 34- Providing & fixing SS 304 Fire rated Ball Bearing But Hinges 100X 75X3MM,ss 304 (For Fire Metal Door)

NS 35 -Providing & fixing SS 304 Fire rated Pull handle D Type 19mmx300mm Length (For Fire Metal Door)

NS 36 -Providing & fixing SS 304 Fire rated Surface door closer, with standard arm, silver finish (For Fire Metal Door)

NS 37 - Providing & fixing Fire rated Panic Bar (For Fire Metal Door)

NS 38 - Providing & fixing Vision panel of 6mm thick borosilicate Fire Rated clear glass , Self adhesive side roll (Ceramic Tape) as required (For Fire Metal Door)

NS 39 - Providing & fixing Fire rated seal for grooved frame (For Fire Metal Door)

NS 40 - Providing & fixing concelled flush bolt SS finish 300mm long (For Fire Metal Door)

FLOORING

NS 41 - Supplying dividing strip fitted and fixed with cement mortar (1:3) in mosaic or patent stone floor, dado etc. complete as per direction of the Engineer-in-charge.(ii) Aluminium - 25 mm. wide & 2mm. thick.

NS 42 - Providing and laying (Matt/Antiskid) Ceramic floor tiles of size as mentioned below (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make and approved colours and design, laid on approx. 20 mm(or more) thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete with all lead ,lift & matching with adjacent floor / slope.

a) 300mmx300mm

b) 600mmx600mm

c) Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Instead of pointing the joints with white cement and matching pigments.

NS 43 - Stone work (machine cut edges) for wall lining etc.(veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.

NS 43.1 -Cherra Stone of size 250X100X15

NS 44 - Providing & Laying Stone guard coating as per approved make over Cherra Stone after necessary preparation of surface at any level complete in all respect as per direction of Engineer-in-charge & specification of the manufacturer.

NS 45 - Extra for pre finished nosing in kitchen slab of Granite

NS 46 - Providing & laying Granite slabs 18 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

NS 47 - Providing and laying Double charge Vitrified floor tiles (Matt finished) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make , in approved colours and design, laid on approx. 20mm (or more) thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc...,complete with all lead ,lift & level matching with the adjacent floors / slope.

NS 47.1 - For Matt Finish of Sizes 600mmX600mm

NS 48 - Providing and laying Double charge Vitrified tiles in different sizes in skirting (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in approved design & colour, in dado, skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete with all lead & lift.

NS 48.1 - For Matt Finish of Sizes 600mmX600mm .

NS 49 - Providing and fixing 20mm thick semi polished Kota stone slab for window sills and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.

NS 50 - Supply & installation of Nylon carpet having an approximate density of 70 million fibres of nylon, 6.6 per m2 (approx.), Fire Test EN-13501, Slip Resistance Test EN-14041 Class DS, sanitized anti microbial treatment with resilient waterproof backing, anti allergic, anti static, thickness of 4.3 mm (approx.) and approximate weight of 1.8 kg/sqm of rollform. Carpet should be 100% washable and stain resistance. Carpet should have approximate acoustic sound reduction of 20 DB.

NS 51 - Epoxy Coating :- Surface shall be prepared by mile scarification to get mechanical key effect to the primer and the concrete surface for ensuring maximum bonding. Strong degrease shall be used to remove the oil deposit on the cement concrete flooring. Dust and loose particles shall be cleaned using vacuum cleaners. Supply and application of primer NITOPRIME 25 of Fosrock or Equivalent after mixing the base and hardener mechanically using a slow speed heavy duty drilling machine (400 to 500 rpm) fitted with a suitable paddle to achieve homogeneous mix and applied on the prepared surface. After that Supplying and applying two coats of solvent free epoxy resin floor coating Nitoflor FC 150.of Fosrock or Equivalent. The total dry film thickness of the coating shall be minimum 400 microns and shall have a compressive strength of 70 mpa , flexural strength of 40 MPA and a tensile strength of 20 MPA. The water absorption(as per ASTM C 413:1996) should not be more than 0.06% and the SHORE D hardness must be 85. Complete in all respect as per instruction of the Engineer in charge.

FINISHING

NS 52 - Outside Textured with paint WITH LOW VOC:-Providing and applying a uniform 2mm (+/- 0.25mm) thick Dolomite filler based Acrylic Texture of approved design/pattern with necessary primer (ON THE BASIS OF FREE MOCK UP/SAMPLE), including pre-preparation of the surface as per manufacturers specifications, approved sample panel, drawing & as directed by the Engineer-in-charge complete in all respect at all level.

NS 53 - Interior Paint (On Gypsum Board/ Calcium Silicate Board) :- Providing and applying 1 coat of Solvent based Cement Primer and 2 coats of Matt / Gloss Finish Enamel of approved shade, complete as per manufacturers specifications, drawing & as directed by the Engineer-in-charge.

ROOFING AND WATER PROOFING WORK

NS 54 - Surface Preparation for water proofing:-Cleaning the surface to make it dust free and sludge free, removing any extended portions by grinding and if required using suitable equipment. The mother slab has to be laid in slope to ensure proper drainage through the drain openings. All surfaces to be waterproofed should be sound, clean and dry. Concrete surfaces should have a light steel-trowel followed by a fine hair-broom or equivalent finish which is dry and free of dust, oil and other contaminants. All high spots should be removed.

NS 55 -Crack treatment & Coving :- Any surface cracks shall be chased open into a ‘V’ groove, and filled with cement mortar mixed with Shalicrete 47 of STP Limited@ 4% by weight of cement. Coving the junctions of the Vertical wall and Roof slab with fillet of size 75mm x 75mm fillet of mortar (Cement: sand – 1:4) admixed with Shalicrete 47. Before chamfering a prime coat shall be given with the slurry of Shalicrete 47.Special care shall be taken to ensure proper coating of the inner surfaces of the drain openings in the wall. Sealing the joint between PVC and masonry with Shaliseal PU of STP Limited.

NS 56 - Application of primer ( with ShaliCrete & two parts of neat cement i.e. in the ratio 1 : 2 of ) on the prepared surface to seal the pores as per manufacturer's specification

NS 57 - Roof Water proofing:-Supply and apply appropriate membrane product of minimum thickness 1.5mm (Shalicem EWP of STP Limited) by applying in roof slab & Parapet Wall upto 450 mm as per approved manufacturer specification.

NS 58 - Providing & Laying M:25 Grade Screed conc. over treated roof average 40mm thick including laying approved quality GI Chiken wire mesh. Mixing with water proofing compound of approved manufacturer with specified ratio,maintaing proper slope & finishing at outlet of pipe and making hallor at the juction of roof & parapet, curing complete in all respect as per satisfaction of the Engineer in Charge et

NS 59 - Lift pit Water proofing :-Supply and application of a non shrink, expanding grout admixture with suitable material (Sika Intraplast EP/FOSROC Brushbond RFX/Shaligrout PU) of approved manufacturer with their direction, by pressure grouting inside RCC floor & treated wall upto Ground Floor (upto 3.00mtr.) after 28 days of curing using 12mm dia, 75 mm long GI nozzles 1.5 m C/C in the concrete.Next Supply and application of an water proofing inside RCC floor & wall upto plinth appropriate coating of approved manufacturer with their direction. (Rate is inclusive of necessary repair for damage portion after installation of Lift )

NS 60 - Covering with Screed plastering:-After curing Providing and applying 12mm thick plastering with Cement Mortar 1:4 admixed with integral waterproofing admixture of approved manufacturer with their direction on wall & floor complete.

NS 61 - Wet floor Water proofing:-Supply and apply water proofing coating of minimum thickness 2mm (Topseal 107/Brushbond RFX/Shalicem EWP ) on floor, polymer modified product as per approved manufacturer with their direction.

NS 62 - Wet wall Water proofing :- Supply and application of water proofing inside floor & wall upto full height & cover 300mm upto outside with appropriate material of minimum thickness 1.5mm (Sika LASTIC 450 I/ Nitoproof 600 FOSROC/BASF Master Seal HLM 5000)of approved manufacturer with their direction.

NS 63 - Providing & fixing Drain board of Polymer material having Thickness 30mm, weight not Less than 280gram/sqft & Surface Void area > 67% proper fixing in between 2 layer of 120GSM Geotextile membrane complete in all respect as per the directions of Engineer-in-Charge.

NS 64 - Providing and applying 1 coat of Solvent based Cement Primer and 2 coats of Acrylic Emulsion of approved shade, complete as per manufacturers specifications, drawing & as directed by the Engineer-in-charge.

NS 65 - Supply & fixing built up panel for roof sheeting consisting of top sheet colour coated 0.45mm base metal thickness trapezoidal profile of 1015 mm effective cover width, with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan, LYSAGHT TRIMDEK of Tata BlueScope Steel make or approved equivalent. The Bottom sheet colour coated 0.45mm base metal thickness(0.53mm TPT) LYSAGHT VARYDEK of Tata BlueScope Steel make or approved equivalent trapezoidal profile of 1000 mm effective cover width, with four major corrugation, 28.5mm deep rib spaced at 200mm c/c with two stiffener in the pan. In Between Top & bottom Sheet Fibre Rock wool Insulation having Thickness: 50 mm & Density: 48 Kg/cum to be provided. The Whole system shall be fastened with nominal 40μm zinc coated or nominal 25μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make (Buildex/Roofix or equivalent) with EPDM washer as per the requirement considering the profile shape and design load.Complete as per manufacturers specifications, drawing & as directed by the Engineer-in-charge.

NS 66 - Providing & fixing LYSAGHT® TRIMDEK® Trapezoidal COLORBOND® steel profile sheet of effective width 1072 mm and nominal 28.5 mm deep ribs with subtle square fluting in the five pans at nominal 203 mm center-to center. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material used as per AS/NZS 2728 Type 4 and of Tata BlueScope Steel make or equivalent with nominal 0.42 mm Base Metal Thickness (0.47 mm TCT) of Hi Strength with minimum 550 MPa yield strength, AZ150 (Min. 150 g/m2 total of both sides) hot dip metallic coating of 55% Aluminum- Zinc to AS 1397 (ZINCALUME® steel) and Lead free Super Durable paint top coat with inorganic pigment. The total paint coat thickness shall be nominal 35 μcomprising of nominal 20 μm exterior coat on top surface and nominal 5 μm backer coat on reverse surface over nominal 5 μm primer coat on both surfaces of approved color shade by concern authority. The feed material should have coil manufacturer’s product details marked at regular interval.(As per approved Standard TBSL color only)

NS 67 - Providing & fixing Flashings upto 900 mm girth: COLORBOND® steel of Tata Blue scope or Equivalent with necessary fittings & fixture complete in all respect

NS 68 - Providing & fixing 12mm thick Cement fibre board of approved make on existing frame at any height with necessary screw, nuts & bolt etc. complete in all respect

MISCELLANEOUS

NS 69 - Dry to Dry wall :-Providing & Fixing 122 mm thick Gypsteel ULTRA®PLUS stud partition which includes inner layers of 12.5 mm thick Gypboard®Plain (conforming to IS 2095 Part 1:2011 ISI Certified board) 1219x2438 mm and outer layer 12.5 mm thick Gyproc®Habito (conforming to EN520:2004,A1:2009,TypeA,D,R,I) 1220x2440 mm is screw fixed with Gyproc® Dry wall Screws of 25mm & Gyproc®Habito Drywall screws of 35 mm respectively at 600 mm at centre and 300 mm at periphery of board to either side of 70mm Gypsteel ULTRA®PLUSC stud (0.5 mm thick having one flange of 34 mm and another flange of 36 mm made of AZ150 coated Steel) placed at 610 mm centre to centre in 72 mm Gypsteel ULTRA®PLUS floor and ceiling channel (0.5 mm thick have equal flanges of 32 mm made of AZ150 coated Steel), which is anchored to the floor & True ceiling using Gyproc® Rawlplug Ø8x45mm {Material-IS513CR1 grade, Zinc coating, Pull Out Load-6.8 kN for M30 concrete grade} / Hilti X-GN 20MX anchor fasteners at 600 mm c/c in zigzag manner. Floor channel to be wrapped with 70μ Self Adhesive LDPE moisture barrier film to further improve corrosion resistance performance. Stud and floor channel are crimped together with crimping tool. The board sari to be fixed vertically to the frame work with joints staggered to avoid leakage through joints. A 12.5 mm

NS 69 .1 - Geoboard Plain strip of 400 mm height is placed inside the stud to provide the backing for skirting (inclient'sscoep) fixing from corridor side. 12.5 mm thick Geoboard® Plainboard strip of 72 mm width his placed between ceiling channel and RCC slab. A Gyp steel ULTRA®PLUS nogg in channel of 70 mm width (0.5 mm thick having two flanges of 40 mm each) has to be provided at the horizontal joints of the outer layer boards screw fixed to the studs using Gyproc® Metal to Metal flat head screws. The boards are to be fixed vertically to the frame work with joints staggered to avoid leakage through joints. 25x25x0.5 mm Gyproc®angle bead should be used at all L- Junctions of partition. 50 mm Glass wool slab of density 20kg/m³ shall be placed in metal frame work. Glass wool holding clip should be used to hold Glass wool slab in its position. Finally square and tapered edges of the boards are to be jointed and finished so as to have flush look which includes filling and finishing with Gyproc®Pro-Fill Gyproc®Pro-Fill Jointing compound Air Dry (Confirms to ASTMC475), Gyproc® Joint Paper tape or fiber tape (as per recommended practices of Saint-Gobain Gyproc India Ltd). The junction of the partition with masonry & all penetration through the partition has to be treated with Hilti /Pyroplex fire and acoustic sealant. All other detailing and specifications to be followed as per approved drawing & direction of the Engineer in Charge.

NS 70 - Providing & fixing Toilet Cubicle with standard dimension with 2250mm height X 1080mm Width X 1500mm Breadth having Door Width 750mm & partition made of 12 mm thick Merino HPL compact panel which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Also including necessary hardware made out of SS 304 Grade 1)Door Knob, 2) Gravity Hinges 3)Latch lock indicators, 4) Top Rail, 5) Door stopper channel complete in all respect.Pilasters will be anchored to the floor using Nylon PA-6 made adjustable legs .The bottom gap is 100-150 mm.

NS 71 - Supply and apply a polyurethane based elastic, sealant gun grade for expansion joint Including complete installation as per manufacturer’s method statement including cleaning of the joint, repair of the joint edges (if required), backer rod, primer, finishing etc. Primer: Shal Prime PUM or equivalent , Sealant: ShaliSeal PU GG or equivalent , Expansion joint section: 40 mm (Width) X 20 (Depth) mm. at the time of finishing work like plastering as directed by Engineer –in-charge as per manufacturer's specification at all heights and depths including necessary backing rod conforming to IS: 1838, all to make the job complete.

NS 72 - Supply and apply a flexible FPO based membrane for expansion joint width 50 mm or as per width size tape Product: Sikadur®-Combiflex® SG System or Equivalent : For upto 50 mm gap size 150 mm x 2 mm or for upto 100 mm gap size- 200 mm x 2 mm or for upto 200 mm gap size 300 mm x 2 mm . Chemical Base Modified flexible Polyolefin (FPO) with advanced adhesion Fire Rating Euroclass E (EN ISO 11925-2, classification to EN 13501-1) Service Temperature -30°C min. to +40°C Supply and apply an epoxy based membrane adhesive base coat & top coat Sikadur®-31 C. Consumption: 1.2 kg/m (strip width 150 mm) Product requirements: mixed density: 1.75 kg/ltr; bond strength > 1.5 N/mm2. The rate includes the repair of edges, backing material , tools tackles etc. all complete. Providing and cleaning the substrate edges , repairing the edges with high strength repair mortar to ensure the gap remains as per drawing. The rate includes the repair of edges, backing material , tools tackles etc. all complete. For gap above 100 mm up to 200 mm tape size 300 mm x 2 mm : internal & external use.

NS 72.1 - Supply and apply a flexible FPO based membrane for expansion joint width 50 mm or as per width size . Product: Sikadur®-Combiflex® SG System or Equivalent : For upto 50 mm gap size 150 mm x 2 mm or for upto 100 mm gap size- 200 mm x 2 mm or for upto 200 mm gap size 300 mm x 2 mm . Chemical Base Modified flexible Polyolefin (FPO) with advanced adhesion Fire Rating Euroclass E (EN ISO 11925-2, classification to EN 13501-1) Service Temperature -30°C min. to +40°C Supply and apply an epoxy based membrane adhesive base coat & top coat Sikadur®-31 C. Consumption: 1.2 kg/m (strip width 150 mm) Product requirements: mixed density: 1.75 kg/ltr; bond strength > 1.5 N/mm2. The rate includes the reapir of edges, backing material , tools tackles etc all complete. Providing and cleaning the substrate edges , repairing the edges with high strength repair mortar to ensure tha gap remains as per drawing. The rate includes the reapir of edges, backing material , hot air welding in overlap of membrane, tools tackles etc all complete. For upto 50 mm gap size 150 mm x 2 mm :- Internal & External use at floor & wall.

NS 73- Dismanteling brick wall with door - window including plaster & paint, minor steel member, boards, Cleaning, carriage of material by mechanical transport including loading, unloading & disposal as per engineer-in-charge.

NS 74 - Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ OR EQUIVALENT 1200mmx600mmx25mm with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per shop drawing duly approved providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the manufacturer.

NS 75 - Supplying & laying pea sized crussed/sand gravel (24mm & down) including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.(Minimum thickness 20 mm)

NS 76 - Providing and fixing in position Reinforced Cement Conc. Seating (3 Seater duly approved the sample) bench as per drawing & design complete in all respect

NS 77 - Providing weep holes in Stone masonry /Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe u-PVC( 4 kg/sqcm) , extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications

SANITARY FIXTURES AND FITTINGS

NS 78 - Providing and fixing white vitreous china pedestal type water closet (European type) P or S trap as applicable of approved model & flushing cistern minimum 3 litres capacity, seat and lid, including flush pipe, with manually controlled device, overflow arrangement with all specials, fittings of standard make of approved municipal design complete, with flush plates all complete or make including cutting and making good the walls and floors wherever required complete in all respect as per Enginerr in charge:(Parryware Elite C02971C including seat cover E80711C & Concealed Cistern with Push Plates (E812099 & E8221A1 or approved equivalent).

NS 79 - Supplying, fitting and fixing Bib cock of approved model with wall flange, including cutting and making good the walls wherever required complete in all respect as per Enginerr in charge{Jaquar, Clarion (Quarter Turn), Cat. No. CQT - CHR - 23047 or approved equivalent}

NS 80 - Supplying, fitting and fixing Two way Bib cock of approved model including cutting and making good the walls wherever required complete in all respect as per Enginerr in charge.{Jaquar, Clarion (Quarter Turn), Cat. No. CQT - CHR - 23041 or approved equivalent}

NS 81 - Supplying, fitting and fixing Hand shower (Health faucet) of approved model with Flexible tube with wall hook complete in all respect as per Enginerr in charge. (E8352A1 Health Faucet of Parryware or approved equivalent).

NS 82 - Supplying, fitting and fixing C.P on brass Double coat hooks of approved model complete in all respect as per Enginerr in charge. (Jaquar Cat. No. ACN - CHR - 1161N or approved equivalent).

NS 83 - Supplying, fitting and fixing Sanitary fixtures and fittings for Paraplegic Toilet set consisting of as follows.

Hindware Mario Wall Mounted Closet (Starwhite) or approved eqqivalent.

Hindware Concealed Cistern CONCEALO 508179 1-Piece or approved eqqivalent.

Wall Mounted Swing-up Bathroom Safety Grab Rail of approved make.(Reference price range Rs.4420/-)

Rust Resistant Grab Rail Bar (White,30cm/12 Inches) of approved make.(Reference price range Rs.995/-)

Bevelled edged mirror of 600 mm x 450 mm size of approved make.(Reference price range Rs.1642/-)

C.P. on brass Toilet paper holder of approved make.(Reference price range Rs.690/-)

C.P. on brass Angular stop cock of approved make.(Reference price range Rs.387/-)

Soap dish Jaquar Cat. No. CAN-1131N or approved equivalent .

Towel ring JAQUAR Cat. No. ACN-1121BN or approved equivalent .

Central hole basin mixer without popup waste system without 450 mm long braided hoses, {Jaquar, Clarion (Quarter Turn), Cat. No. CQT - CHR - 23167B or approved equvalent .

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps of approved make.(Reference price range Rs.3951/-)

Hand shower (Health faucet) with 8 mm dia, 1.2 metre long Flexible tube with wall hook, (E8352A1 Health Faucet of Parryware or approved equivalent).

Two way Bib cock, {Jaquar, Clarion (Quarter Turn), Cat. No. CQT - CHR - 23041

NS 84 - Providing and fixing white vitreous china flat back half stall star white urinal basin of 580x380x350mm size with with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete in all respect as per Engineer in charge: (Hindware Cat No. 60002 &Jaquar- PRS-077 for auto closing or approved equivalent)

NS 84.1 - One urinal basin with urinal valve Auto closing system with in built control cock of approved make.

NS 85 - Supplying, fitting and fixing Starwhite glazed vitreous Division plates of approved make for urinals of size350(L)X675(W)X130(H) all in mm complete in all respect as per Engineer in charge.(Parryware Cat no.C05711C Magnum or approved equivalent)

NS 86 - Providing and fixing wash basin of approved make with C.I. brackets, without 15 mm C.P. brass pillar taps / basin mixer but with 32 mm C.P. brass waste, 32 mm CP. Bottle trap and unions of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete in all respect as per Engineer in charge. :Hindware cat no. 10087 or approved equivalent.

NS 86.1 - White Vitreous China Flat back wash basin of approved make.

NS 87 - Providing and fixing white glazed vitreous china wash basins oval shaped under counter of approved make without C.P. pillar tap/Mixer, but with 32 mm C.P. brass waste full thread Jaquar cat no. ALD-705, bottle trap Jaquar cat no. ALD-769L250x190 and unions and sealing of joints between wash basins and counter slabs around the wash basins with Silicone rubber cement of approved make of matching colour all complete including cutting and making good the walls and floors where required complete in all respect as per Engineer in charge.

NS 871 -PARRYWARE ware Wash basin NiagaraCat. No. C0499 (under counter) oval shape,Hindware Addons 32mm Full Thread Waste Coupling (Chrone), Hindware Addons 32mm Econony Model Bottle Trap with 190mm and 250mm Long with Wall Connection Pipe and Wall Flange (Chrone) or approved equivalent make.

NS 88 - Supplying, fitting and fixing Pillar Cock of approved make complete in all respect as per Engineer in charge. {Jaquar, Clarion (Quarter Turn), Cat. No. CQT - CHR - 23011 or approved equivalent}.

NS 89 - Supplying, fitting and fixing Central hole basin mixer without popup waste system of approved make without 450 mm long braided hoses complete in all respect as per Engineer in charge. {Jaquar, Clarion (Quarter Turn), Cat. No. CQT - CHR - 23167B or approved equivalent}.

NS 90 - Providing and fixing bevelled edge Mirror of superior glass (of approved quality) of specified size & thickness 4-8 mm complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as directed by the Engineer in Charge.

NS 91 - Providing and fixing Towel ring of approved make complete in all respect as per Engineer in charge.(JAQUAR Cat. No. ACN-1121BN or approved equivalent)

NS 92 - Providing and fixing C.P brass Towel rails of approved make complete in all respect as per Engineer in charge. JAQUAR Cat. No. ACN-1111NM or approved equivalent.

NS 93 - Providing and fixing stainless steel soap dish of approved make complete in all respect as per Engineer in charge. Jaquar Cat. No. ACN-1131N or approved equivalent.

NS 94 -Providing and fixing manual liquid Soap dispenser of approved make complete in all respect as per Engineer in charge. Parryware makeT6513A1 Soap Dispenser or approved equivalent make.

NS 95 - Providing and fixing C.P on brass Sink mixer with swinging casted round shape spout (Wall mounted model) and wall flanges of approved make complete in all respect as per Engineer in charge. {Jaquar, Clarion (Quarter Turn), Cat. No. CQT - CHR - 23309 or approved equivalent}.

NS 96 - Providing and fixing over head Shower of approved make complete in all respect as per Engineer in charge Parryware T9809A1 (Over head shower with arm) or approved equivalent.

NS 97 - Providing and fixing CP wall mixer of approved make complete in all respect as per Engineer in charge with provision for overhead shower (Jaquar cat. No. CQT-23273UPR or approved equivalent).

NS 98 - Supplying, fitting and fixing Storage type Water heater of approved make having inner/outer coated corrosion resistant body, high temperature and pressure safety devices, fixing lugs / bolts etc. and including plug top and electrical power supply 230 volts AC, single phase, 6 KW wattage with ISI Certification & necessary fixtures all complete in operational. Storage capacity of 300 Litres set of approved make with accessories Storage Water Heater complete in all respects as per direction of the Engineer in charge.

NS 99 - Supplying, fitting and fixing Storage type Water heater of approved make having inner/outer coated corrosion resistant body, high temperature and pressure safety devices, fixing lugs / bolts etc. and including plug top and electrical power supply 230 volts AC, single phase, 2 KW wattage with 5 star rating with ISI Certification & necessary fixtures all complete in operational.

NS 99 .1 - Storage capacity of 15 Litresset of approved make with accessories Venus Splash 15GL 15-Litre Storage Water Heater complete in all respects as per engineer in charge (Honey Gold, BEE Star Rating - 5 Stars) or approved equivalent make / model].

NS 99 .2 - Storage capacity of 25 Litres set of approved make with accessories (Venus Lyra 25R 2000-Watt Water Heater complete in all respects as per engineer in charge [(Ivory/Orange, BEE Star Rating - 5 Stars)or approved equivalent make / model].

NS 100 - Supplying, fitting and fixing Water purifier for drinking purpose of approved make having storage capacity not less than 8 liters,with UV technology water purification system, smart auto fill feature to ensure automatic filling and storage of water to make it readily available, mineral guard, filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects as per engineer in charge( Blue Star Majesto MA4WGAM01 8-Litre RO + UV Water Purifier,White and Golden or approved equivalent.)

NS 101- Supplying, fitting and fixing full body SS Water Cooler of approved make for drinking purpose of storage capacity not less than 40 liters, cooling capacity 20 liters/hour with 1 or 2 taps, ecofriedly refrigerant R134a or superior, hermatic type compressor equipped with overload protection, thermostat control, condenser fan, power supply 230volts, 50 Hz, single phase power plug and electrical lead wire connection upto 3 metres from the water cooler, water inlet and drain out connections complete in all respects as per engineer in charge( Blue Star Model SDLX240 20 L Stainless Steel Water Cooler Cooling with 40 L Storage set with accessories or or approved equivalent.)

NS 102 - Providing and fixing Hand dryer of approved make complete in all respect as per Engineer in charge (Dolphy Automatic Hand Dryer or approved equivalent)

NS 103 - Providing and fixing 450mm long braded hose of approved make with two 15 mm nuts & rubber washers without nipple complete with C.P. brass flange including cutting and making good the walls wherever required complete in all respects as per engineer in charge.( Jaquar Cat No. 805B or approved equivalent)

NS 104 - Providing and fixing S.S. round grating of approved make with round frame, minimum 125 mm Dia overall size, glossy finish including setting in floor with sealent complete in all respects as per engineer in charge.( GRT-0012 SS Grating Round Frame with Waste Pipe Hole and Locking Mechanism (Hole Pattern) 125mm or approved equivalent)

NS 105 - Providing, fixing and testing UPVC soil waste and vent pipes of approved make UV stabilize and conforming to IS: 13592 - Type-B including all fittings conforming to IS:14735 such as W.C. connector, bends, junctions, inspection doors, offsets, vent cowls, access pieces/plugs, cleanout plugs etc. clamps/ structural steel supports as required/directed at site, jointing with rubber ring and rubber lubricant including cutting holes in walls and making good the same complete in all respect as per Engineer in charge.

a) 110 mm dia

b) 75 mm dia

NS 106 - Providing & laying, in trenches or in exposed, of uPVC pipes with fittings of class III (6 kg/ cm2) as per IS:4985 and as per specification with rubber ring and rubber lubricant,(EPDM/SBR) for all depths with or without well graded granular bedding (Type-E) for pipe length as per drawing and specification including hydraulic field testing and commissioning etc all complete as directed by Engineer

a) 63 mm dia

b) 50mm dia

c ) 40 mm dia

NS 107 - Providing and fixing UPVC trap ('P' or 'S') of self cleaning design without C.P. grating with or without vent horn complete, as shown in detailed drawing including inlet fitting wherever required including cost of cutting and making good the walls & floors.

a) 110 mm inlet and 110 mm outlet

b) 110 mm inlet and 75 mm outlet

WATER SUPPLY

NS 108 - Providing, fixing, Chlorinated polyvinyl chloride (CPVC) pipes SDR11 , having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1m spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge.

Concealed work including cutting chases and making good the wall etc.

a) 40mm nominal outer dia. Pipes

b) 50mm nominal outer dia. Pipes

NS 109 - Providing, fixing, Chlorinated polyvinyl chloride (CPVC) pipes SDR 11/sch40 , having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1m spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

a) 65mm dia. nominal inner dia.

b) 80mm dia. nominal inner dia.

c) 100mm dia. nominal inner dia.

NS 110 - Providing and fixing class-O Kaiflex ST / Thermaflex or other approved make tube insulation to hot water pipe and fittings and valves as per manufacturer's recommendations

a) on 15mm dia 9mm thick insulation

b) on 20mm dia 9mm thick insulation

c ) on 25mm dia 9mm thick insulation

d) on 32mm dia 25mm thick insulation

e ) on 40mm dia 25mm thick insulation

f) on 50mm dia 25mm thick insulation

g) on 100 mm dia 25mm thick insulation

NS 111 - Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

a) 100mm nominal bore

NS 112 -Providing and fixing butterfly valves of PN 1.0 rating, wafer type, C.I. body I.S. 210 FG 220, disc: C.F.8/SS304, shaft AISI 410, seat ntegrally moulded Nitrile/EPDM of approved make, handle lever with on /off indication all complete as required.

a) 100mm dia

NS 113 - Providing and fixing 2/2 Way Pilot Operated Diaphragm type Solenoid Valve, screwed or flanged end,suitable for water supply as per site, of SS body (SS-304) to ASTM A 351 GR CF 8 & internals having weather proof coil enclosure & working pressure range (min. 0.7 Kg/cm2 & max 12 Kg/cm2 ) with coil of 220 Volt, AC suitable for horizontal installation, normally closed with all electro mechanical accessories including 2/2 way Y type strainer at inlet of solenoid valve, screwed ends, body & cover SS 304 to ASTM A 351 GR CF 8 with same working pressure as stated above, having diaphragm of nitrile rubber and 40 mm mesh size. along with automatic solenoid valve On-Off Controller Box with one number Float switch sensor for water tank level controller with five meter long control wire connecting to solenoid valve and exluding electrical supply wire connection to controller box and wire from controller box to solenoid valve, with opeating voltage of 220 AC suitable for vertical/horizontal installation in water tank as per site condition suitably connected to solenoid valve through control cable all inclusive with all electro mechanical accessories complete operational (Operation by SCADA system).

a) 25 mm dia

b) 40 mm dia

NS 114 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

a) 40mm nominal bore

NS -115 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

a) 20 mm nominal bore- Horizontal

b) 100 mm nominal bore- Horizontal

NS 116 - Providing and fixing in position 32 mm diameter mosquito proof coupling of approved municipal design.

NS 117 - Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement providing and fixing painted CI frame and cover of size 300X300 weighing not less than 7.2Kgs with locking arrangement fixing the frame in CC 1:2:4 including form work, curing, etc complete as per standard desig

NS 117.1 - With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

RAIN WATER PIPES AND FITTING

NS 118 - Providing and fixing 50 mm dia CPVC Spout of length upto 300 mm, including concreting and water proofing around it.

EXTERNAL PLUMBING

WATER SUPPLY

NS 119 - Providing and fixing G.I. pipes (C- Heavy) complete with G.I. fittings including trenching and refilling etc. conforming to IS : 1239.

a) 25 mm nominal bore.

c) 40 mm nominal bore.

d) 50 mm nominal bore.

e) 65 mm nominal bore.

NS 120 - Providing, fixing, testing & commissioning screwed type Cast Steel compact Pressure reducing valve of approved quality conforming to IS-9739 with pipes and specials including making necessary screwed/ flanged joints by providing all jointing materials including painting and testing the joints to hydraulic pressures specified for pipes all complete as per drawings and as directed by the Engineer-in-Charge to manage pressure of water, to restrict hydraulic forces by spring forces and maintains the desired pressure level in various parts of circuit. The maximum inlet pressure should be 20 Kg/Sqcm & outlet pressure 8-12 Kg/Sqcm.

a) 40 mm nominal bore.

NS 121 - Providing and fixing Water Level Monitor (Water Gauge) for installing on the over head Water Reservoir consisting of calibrated back ground board, copper float valve, strand red wire, required number of pulleys, puddle collar / sleeves as required adjustable pointer etc. complete operational.(Water level difference upto 4 m.) - For over head reservoir

NS 122- Providing and fixing water level control switch assembly consisting of adjustable low level and high level actuation for auto on/off the respective motor for installing from top / side of the reservoir through sleeve of 150 mm dia on top / side of underground reservoir including flange, PVC guide tube, two numbers floats with SS wire and electric contactor including cost of control wiring from the respective motor panel to the controlling switch etc. complete operational & as directed by the Engineer-in Charge.

DRAINAGE WORKS:

NS 123 - Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete

a) 500 mm dia. R.C.C. pipe

b) 700 mm dia. R.C.C. pipe

NS 124 - Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

NS 124.1 - Pipes, cables etc. exceeding 600 mm dia but not exceeding 900 mm

NS 125 - Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

NS 125.1 - Pipes, cables etc. exceeding 600 mm dia but not exceeding 900 mm

NS 126 - Supplying and fitting fixing M.S Grating over 500 mm wide Drain at entry point

NS 127 - Supplying,fitting and fixing C.I grating with frame vertical grating, weight of grating will not be less than 16.50 Kg as per drawing.

SEWERAGE WORKS

NS 128 - Supplying, fitting, fixing, laying of 110 mm dia u-PVC Pipes conforming to IS 13592, Type-B of approved make with all necessary accessories, excluding bend, including testing and operation.

NS 129 - Supplying, fitting, fixing and laying of 160 mm dia u-PVC Pipes conforming to IS 13592, Type-B of approved make with all necessary accessories, excluding bend, including testing and operation

NS 130 - Supplying, fitting and fixing of SWR bend of 110 mm dia using solvent & conforming to IS 14735 of approved make with all necessary accessories, including testing and operation.

NS 131 - Supplying, fitting and fixing of SWR bend of 160 mm dia using solvent & conforming to IS 14735 of approved make with all necessary accessories, including testing and operation.

NS 132 - Fresh air inlet Mica Flap valve

NS 132.1 - Supplying, fitting and fixing of Mica Flap Valve made of Cast Iron for 100 mm dia pipes of approved make with all necessary accessories, including testing and operation as approved by the Engineer-in Charge.

(ELECTRICAL WORKS)

LIGHT FITTINGS (SURFACE/ RECESS MOUNTED)

Supply, installation, testing & commissioning of the following light fixtures complete with lamps, led driver, electronic ballast etc complete in all respect .Supply including all accessories required for mounting at surface/ recess /wall as required conforming to relevant IS codes.

NS 133 -Supply, installation, testing & commissioning of 1x18W LED TUBELIGHT( 4 feet), Opal diffuser, Polycarbonate housing with Polycarbonate end caps, High efficiency long life SMD LED module with system lumen efficacy of 100 lm/W. Powered by a integral electronic driver (SMPS based constant current supply) with Output Short-Circuit Protection, Surge Voltage Protection upto 4kV. System Lumen 4400. CRI >80, IP 20 , Color temperature 5700K to 6500K, THD <20% and PF >0.95, Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:4 KV; Protection. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE similar to Havells Cat. No. Regal Battern with 1x18W Photon Ultra Tubelight or equivalent.

NS 134 - Supply, installation, testing & commissioning of 2x18W LED TUBELIGHT( 4 feet) suitable for G13 holder with single side connection, Opal diffuser for glare free operation. Polycarbonate housing with Polycarbonate end caps.High efficiency long life SMD LED module with system lumen efficacy of 100 lm/W. Powered by a integral electronic driver (SMPS based constant current supply) with Output Short-Circuit Protection, Surge Voltage Protection upto 4kV. System Lumen 4400. CRI >80, IP 20 , Color temperature 5700K-6500K, THD <20% and PF >0.95, Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:4 KV; Protection. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE similar to Havells Cat. No. Regal Battern with 2x18W Photon Ultra Tubelight or equivalent.

NS 135 - Supply Installation and Comissioning of recessed mounted 18W Round Shape Downlighter with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling. pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integral electronic low THD (<10%) LED driver.High efficiency long life LED package in integral module with lumen efficacy of >100 lm/W .Powered by an integrated driver, SELV Output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test. Lumen Output of 1900lumens.CRI >80, Color temperature 5700K, THD <10% and PF >0.95,IP20,IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV; Protection : Reverse Polarity, Open & Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE. similar to Havells Cat. No. Integra Recess 18W or equivalent.

NS 136 - Supply, installation, testing & commissioning of 15W Led Slim fit recess mounted round LED panel al. die cast body with diffuser, Color temperature 5700K, similar to Havells Cat. No. EDGEPRORDDLR15WLED857S or equivalent

NS 137 - Supply Installation and Comissioning of recessed mounted 15W Round Shape Downlighter with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling. pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integral electronic low THD (<10%) LED driver.High efficiency long life LED package in integral module with lumen efficacy of >100 lm/W .Powered by an integrated driver, SELV Output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test. Lumen Output of 1900lumens.CRI >80, Color temperature 5700K, THD <10% and PF >0.95,IP20,IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV; Protection : Reverse Polarity, Open & Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE. similar to Havells Cat. No. Integra Recess 15W or equivalent.

NS 138 - Supply, installation, testing & commissioning of Wall mounted 9W Led Mirror light, CRI>80, Color temperature 5700K-6500K, THD<10%,PF>0.95, IP20,IK03,Life class of 50,000 hrs @ L70,Operating Temperature:-10 To +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ,Internal Surge Protection:2.5 KV; similar to Havells Cat. No. Lumiline 9W or equivalent.

NS 139 - Supply, installation, testing & commissioning of 15W Led surface mounted round LED panel, CRI>80, Color temperature 5700K-6500K, THD<10%,PF>0.95, IP20, IK03, Life class of 50,000 hrs @ L70,Operating Temperature:-10 To +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency : 50-60 HZ,Internal Surge Protection:2.5 KV; similar to Havells Cat. No. Integra Surface 15W or equivalent.

NS 140 - Supply, installation, testing & commissioning of 10W Surface mounted, IP 66, bulk head LED luminaire, CRI>80, Color temperature 5700K-6500K, THD<10%,PF>0.95, IP20, IK03, Life class of 50,000 hrs @ L70,Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency : 50-60 HZ,Internal Surge Protection:2.5 KV; similar to Havells Cat. No.Hexa 10W or equivalent.

NS 141 - Supply, installation, testing & commissioning of 12W Led Slim surface mounted round LED panel al. die cast body with diffuser, Color temperature 4000K, similar to Havells Cat. No. LHEAAVP6IL1W012 or equivalent.

NS 142 - Supply, installation, testing & commissioning of Wall mounted Night lamp with shade complete with all accessories.

EXHAUST FAN

NS 143 - SITC of 300mm sweep 1 phase Exhaust fan Havells Cat. No. Venti Air-DSP or equivalent of approved make with heavy duty louvers shutter, complete with frame, as required and including all other fixing accessories as required.

Sockets/Switch

NS 144 - Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet including connections, painting etc. as required.

NS 145 - Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular Switch including connections, painting etc. as required.

NS 146 - Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular Switch and 25 A Starter including connections, painting etc. as required. ( Power unit for A.C. )

NS 146 - Supplying and fixing 2(+) Module Weatherproof cabinet -IP65 (Legrand Cat no.601932) along with all accessories on surface/ recess along with 40A, 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.( Geyser at Roof)

CABLES

NS 147 - Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment

3.0 C x 4 sqmm

3.5 Core x 25 sq.mm

3.5 Core x 35sqmm

3.5 Core x 70 sq.mm

3.5 C x 95 sqmm

3.5 C x 120 sqmm

3.5 C x 150 sqmm

3.5 Core x 185 sq.mm

3.5 Core x 240 sq.mm

3.5 Core x 400 sq.mm

4.0 C x 6 sqmm

4.0 C x 10 sqmm

4.0 C x 16 sqmm

MAIN PANEL & DISTRIBUTION BOARD

PANEL BOARD

NS 148 - Main Panel (Annex)

Incoming - 1 nos. (comprising of)

1 No.- 400A 4P, MCCB as incomer

2 Set - Single core CTs 400/5A of 15 VA burden and accuracy Class - 1.

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

400A Aluminium busbars, including making necessary connections.

Outgoing

1Nos.- 250A, FP MCCB, 36 KA

4Nos.- 160A, FP MCCB , 25 KA

9Nos.- 63A, FP MCCB , 25 KA

NS 149 - Floor Main Distribution Board (Annex)

Incoming - 1 nos. (comprising of)

1 No.- 63A 4P, MCCB as incomer

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

63A Aluminium busbars, including making necessary connections.

Outgoing

6Nos.- 40A, FP MCB

NS 150 - Floor Main Distribution Board (UPS) (Annex)

Incoming - 1 nos. (comprising of)

1 No.- 63A 4P, MCCB as incomer

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

63A Aluminium busbars, including making necessary connections.

Outgoing

10Nos.- 40A, FP MCB

NS 151 - UPS Main Panel (INCOMMING) (Annex)

Incoming - 2 nos. (comprising of)

2 No.- 160A 4P, MCCB as incomer ( with Mechanical inter lock, only one I/C WILL BE ON AT A TIME )

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

160A Aluminium busbars, including making necessary connections.

Outgoing

3 Nos.- 160A, FP MCCB

NS 152 - UPS Main Panel (OUT GOING)

Incoming - 1 nos. (comprising of)

1 No.-160A 4P, MCCB as incomer

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

160A Aluminium busbars, including making necessary connections.

8 Nos.- 63A, FP MCCB

P.F. Correction Panel (Annex)

NS 153 - Supplying, installation, testing and commissioning of automatic power factor correction panels (Fabricated out of 2/1.6mm thick(Gland plate shall be 2mm) CRCA sheet steel encloser) of following size(KVAR) of capacitors suitable for 440 Volts 3 phase,50Hz, floor or Wall mounted & having MPP (Metallized Polypropylene) type with 7% Detuned harmonic block reactor , self fusing, low loss, self healing, resin bonded without oil, single phase delta connected capacitors (confirming to IS : 2834 IS : 13346,IEC-61921, IEC-831/1-2, & IEC-439 (1 - 2), housed in alluminum cans & having current limiting contacts circuit to suppress switching in rush current & having 4 to 8 step microprocessor based APFC relay with digital display controlling capacitors of following rating for improvement of targeted P.F. of the system. Panel should be as per IEC 61439.

APFC Panel (50 KVAR - 2x12.5+ 2x10+1x5- 5step)

A) Incoming - 1 nos. (comprising of)

1 No.- 125A FP 36KA (Icu=Ics) MCCB with thermal magnetic releases, as incomer

1 Set - Single core CTs 125/5 A of 15 VA burden and accuracy Class - 1.

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

B) BUSBARS

125A Aluminium busbars, including making necessary connections.

C) Outgoing

4Nos.-32A 25KA (Ics=Icu), TP MCCB

2Nos.-16A 25KA (Ics=Icu), TP MCCB

4 Nos-32A TP power contactors and ON - OFF push buttons.

2 Nos-16A TP power contactors and ON - OFF push buttons.

D) Automatic power factor correction relay (APFCR)

Microprocessor based automatic power factor correction relay with all accessories for sensing of power factor of the system and initiating corrective action( for 'cutting in' or 'cutting out' of required number of capacitor banks) including step controller, reversing mechanism, time delay and following protection like over voltage, under current and loss of power.

1 Set - ON/OFF indicating lamps for each bank of capacitors.

E) Step of Capacitor banks (50KVAR)

5step -2x12.5+ 2x10+1x5

NS 154 - APFC Panel (200 KVAR - 2x12.5+ 1x25+3x50 - 6step) (Annex+Student H-II)

A) Incoming - 1 nos. (comprising of)

1 No.- 400A TP 36KA (Icu=Ics) MCCB with Microprocessor base, as incomer

1 Set - Single core CTs 400/5 A of 15 VA burden and accuracy Class - 1.

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

B) BUSBARS

550A Aluminium busbars, including making necessary connections.

C )Outgoing

2Nos.-32A 25KA (Ics=Icu), TP MCCB

1Nos.-63A 25KA (Ics=Icu), TP MCCB

3Nos.-125A 25KA (Ics=Icu), TP MCCB

2Nos-32A TP power contactors and ON - OFF push buttons.

1Nos63A TP power contactors and ON - OFF push buttons.

3 Nos-125A TP power contactors and ON - OFF push buttons.

D) Automatic power factor correction relay (APFCR)

Microprocessor based automatic power factor correction relay with all accessories for sensing of power factor of the system and initiating corrective action( for 'cutting in' or 'cutting out' of required number of capacitor banks) including step controller, reversing mechanism, time delay and following protection like over voltage, under current and loss of power.

1 Set - ON/OFF indicating lamps for each bank of capacitors.

E )Step of Capacitor banks (200KVAR)

6step- 2x12.5+ 1x25+3x50

NS 155 - Main Panel (Student Hostel-II)

Incoming - 1 no. (comprising of)

1 No.- 630A 4P, MCCB as incomer

2 Set - Single core CTs 630/5A of 15 VA burden and accuracy Class - 1.

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

800A Aluminium busbars, including making necessary connections.

Outgoing

5Nos.- 400A, FP MCCB

2Nos.- 100A, FP MCCB

2 Nos.- 63A, FP MCCB

NS 156 - SUB MAIN PANEL ( BLOCK- A,B & C) (Student Hostel-II)

Incoming - 1 no. (comprising of)

1 No.- 400A 4P, MCCB as incomer

2 Set - Single core CTs 400/5A of 15 VA burden and accuracy Class - 1.

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

400A Aluminium busbars, including making necessary connections.

Outgoing

6Nos.- 100A, FP MCCB

2Nos.- 40A, FP MCB

NS 157 - FLOOR MAIN DB (Student Hostel-II)

Incoming - 1 no. (comprising of)

1 No.- 100A 4P, MCCB as incomer

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

100A Aluminium busbars, including making necessary connections.

Outgoing

8Nos.- 40A, FP MCB

NS 158 - MAIN POWER DB (GEYSER) (Student Hostel-II)

Incoming - 1 no. (comprising of)

1 No.- 100A 4P, MCCB as incomer

1 Set - R,Y,B Phase indication LED lamp with 2 Amp back up HRC fuse.

BUSBARS

100A Aluminium busbars, including making necessary connections.

3nos.63 Amps. Rating, 2pole RCCB, 30mA

Outgoing

9Nos.- 40A, DP MCB

NS 159 - UPS ( (IGBT Based, parallel mode (PRS) )

Supply and Installation of 100 kVA UPS in parallel mode(PRS) with IGBT Based Rectifier and Inverter, 3 Phase , 415 V, AC , 50 Hz I/P and O/P,Unity output Power Factor , I/P THDi ≤ 3%, Complete with battery chargers, battery interlink cable,Battery rack, circuit breaker, indications(LED), interface etc. UPS should have back up time minimum of 30 minutes on full load along with 100 kVA Isolation Transformer with following accessories.

a) Rack

b) Battery for 30 Minutes back up-120AH * 60 Number battery in each UPS ( Total VAH-86400).

NS 160 - Lift-1

Supplying, installation, testing and commissioning of Capacity 1020 Kg, 15 persons with followings specifications.

SPEED (mps) : 1 mps

RISE (m): 10 m

STOPS : 3 Stops With (all opening on the same side)

CONTROLLER TYPE : ACD3-MR

DRIVE : VF Regenerative (Closed Loop)

POWER SUPPLY : 400/415 Volts (3 Phase AC)

OPERATION : Full collective operation

CAR GROUP : One car

MACHINE : PM Gearless (Located above shaft)

TRACTION MEDIA : Flat Coated Steel Belt

CAR FINISH :  Rear Mid Panel = Stainless Steel  Rear Corner Panels = Stainless Steel  Side Panels = Stainless Steel  Front Panels = Stainless Steel

FALSE CEILING TYPE : CD-41 of Otis or equiv.

FALSE CEILING FINISH : Stainless Steel

VENTILLATION : Cross flow fan

HAND RAILS : Stainless Steel Mirror Finish Handrails on all car panels(sideLH,sideRH&Rear)

FLOORING : Vinyl Tiles

CAR DOOR FINISH : Stainless Steel

LANDING DOORS FINISH : Stainless Steel

FIRE RATED DOORS : Fire rating-60mins

CAR & HOISTWAY DOOR TYPE : Telescopic 2 speed doors

DOOR OPERATOR : DC Door Operator

COP ; COP for stops <= 12 (950mm) in Stainless Steel

CAR POSITION INDICATOR : Required.

HALL BUTTON ARRANGEMENT : Hall Button with HPI

STANDARD FEATURES : Anti-nuisance Car Call Protection Overload Device Nudging, Emergency Firemen’s Service Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection, Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off

OPTIONS INCLUDED : Automatic Rescue operation, Voice Synthesizer, Intercom, Provision for CCTV and any other proprietary feature.

Above Lift

NS 161 - Lift-2

Supplying, installation, testing and commissioning of Capacity 1020 kgs, 15 persons with followings specifications.

SPEED (mps) : 1 mps

RISE (m): 10 m

STOPS : 4 Stops With (all opening on the same side)

CONTROLLER TYPE : ACD3-MR of Otis or equiv.

DRIVE : VF Regenerative (Closed Loop)

POWER SUPPLY : 400/415 Volts (3 Phase AC)

OPERATION : Full collective operation

CAR GROUP : One car

MACHINE : PM Gearless (Located above shaft)

TRACTION MEDIA : Flat Coated Steel Belt

CAR FINISH :  Rear Mid Panel = Stainless Steel  Rear Corner Panels = Stainless Steel  Side Panels = Stainless Steel  Front Panels = Stainless Steel

FALSE CEILING TYPE : CD-41 of Otis or equiv.

FALSE CEILING FINISH : Stainless Steel

VENTILLATION : Cross flow fan

HAND RAILS : Stainless Steel Mirror Finish Handrails on all car panels(sideLH,sideRH&Rear)

FLOORING : Vinyl Tiles

CAR DOOR FINISH : Stainless Steel

LANDING DOORS FINISH : Stainless Steel

FIRE RATED DOORS : Fire rating-60mins

CAR & HOISTWAY DOOR TYPE : Telescopic 2 speed doors

DOOR OPERATOR : DC Door Operator

COP ; COP for stops <= 12 (950mm) in Stainless Steel #4(Hairline)

CAR POSITION INDICATOR : Required.

HALL BUTTON ARRANGEMENT : Hall Button with HPI

STANDARD FEATURES : Anti-nuisance Car Call Protection Overload Device Nudging, Emergency Firemen’s Service Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection, Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off

OPTIONS INCLUDED : Automatic Rescue operation, Voice Synthesizer, Intercom, Provision for CCTV and any other proprietary feature.

Above Lift

FIRE ALARM AND DETECTION SYSTEM

Fire Alarm and Detection

NS 162 - Supply, Installation, Testing, Commissioning of Fiber optic communication interface card for FDA panel along with trans -receiver module enclosed.

PA SYSTEM

IP BASED TELEPHONE SYSTEM

NS 163 - Supply, Installation, Testing and Commissioning of SIP based 2-way IP Deskphone supporting Monochrome 128x32 pixel display and three context-sensitive soft keys. It should be POE Class-1 device.

Networking

Local Area Network

NS 164 - Supply, Installation, Testing and Commissioning of Indoor Access Point (4x4:4SS MIMO). Access Point should be 802.11ac Wave 2 ready from day one.Should have mounting kit from same OEM.

NS 165 - Supply, Installation, Testing and Commissioning of Indoor Access Point (3x3:3SS MIMO). Access Point should be 802.11ac Wave 2 ready from day one.Should have mounting kit from same OEM.

NS 166 - Supply, installation, testing and commissioning of 24 RJ-45 autosensing 10/100/1000 POE+ ports and 4x1/10G SFP+ ports (Populated with 2x 10G LR SMF module) from day-1. Minimum switching capacity of min 128 Gbps and 95 Mpps (Maximum packets per second) throughput. Fiber module should be from the same OEM.

NS 167 - Supply, installation, testing and commissioning of 8 RJ-45 autosensing 10/100/1000 POE+ ports and 2x1/10G SFP+ ports (Populated with 2x10G LR SMF module) from day-1.Minimum switching capacity of min 56 Gbps and 41 Mpps throughput. Fiber module should be from the same OEM.

NS 168 - Supply, Laying, testing and commissioning of CAT 6A U/UTP Cable 23 AWG , LSZH, UL Certified , performance requirement as per as per ANSI/TIA 568C.2, Yellow RAL 1018.

NS 169 - Supply, installation, testing and commissioning of CAT6A UTP 24 port loaded patch panel made up of galvanised steel sheet, Compliant with standards: ISO/IEC 11801 Edition 3.0 Contacts: gold/nickel, thickness of gold > 0.8 μm minimum ,Equipped with rear cable guide to hold cable during maintenance,The connectors are connected from the front without a special tool. Equipped with 4 cassettes of 6 RJ45 Cat. 6A connectors with toolless fast connection, Each connector can be removed individually, marked 568 A/B, Max. number of connections and disconnections: 5 without replacing the wire, Endurance: 2500 operations (plug-in/pull-out).

NS 170 - Supplying installation testing and commissioning of CAT6A UTP 12 port loaded patch panel made up of galvanised steel sheet, Compliant with standards: ISO/IEC 11801 Edition 3.0 Contacts: gold/nickel, thickness of gold > 0.8 μm minimum ,Equipped with rear cable guide to hold cable during maintenance, The connectors are connected from the front without a special tool. Equipped with 4 cassettes of 6 RJ45 Cat. 6A connectors with toolless fast connection, Each connector can be removed individually, marked 568 A/B, Max. number of connections and disconnections: 5 without replacing the wire, Endurance: 2500 operations (plug-in/pull-out).

NS 171- Supply, installation, testing and commissioning of CAT 6A UTP 2 MTR factory made or factory crimpped LSZH Patch cord Green colour.

NS 172- Supply, installation, testing and commissioning of Cat 6A UTP RJ 45 Sockets Tool Less Crimping, as per- ISO/IEC 11801 Edition 2; should have transparent shutter for protection against dust, Contacts :gold/nickel, minimum thickness of gold > 0.8 μm , Body made of high impact PBT Polycarbonate plastic material, Endurance 2500 movements (plug insertion / withdrawal). IK03, Maximum no of Connections/ Re connections 5 without refreshing the wiring.

NS 173- Supplying installation testing and commissioning of Single Port Face Plate 1 Module in white colour.

NS 174- Supply, installation, testing and commissioning of Two Module Metal Surface box.

NS 175- 6 Core , Multi Mode Loose Tube , Gel Filled 50/125 OM3 fiber optic cable along with LSZH sheath. (Note: Rack to rack connectivity)

NS 176- Supply, installation, testing and commissioning of 6 port Rack mount Sliding Metal 19" Fibre optic drawer (LIU) with trasperent cover, 4 cable entries, supplied with screw fixing kit, 4 cable glands (Ø 13.5 and 16 mm), coiling system, Sliding end stop at a 30° angle for easier wiring with lock with lock. Depth: 220 mm, height 1 U consist of MM SC Adapter, MM SC Pigtail 1 Mtr, Splice tray and blanking plate.

NS 177- Supplying installation testing and commissioning of Single Mode SC-LC Duplex Patch Cord, 2 Mtr.

NS 178- Supply, installation, testing and commissioning of 9U, 600 (W) x 500(D) Wall Mount Rack with 2 Nos of Fan, 1 Metal Cable Manager, 1 No 6 amp 6 Socket PDU and mounting hardware packet.

NS 179- Supply, installation, testing and commissioning of 12U, 600 (W) x 500(D) Wall Mount Rack with 2 Nos of Fan, 1 Metal Cable Manager, 1 No 6 amp 6 Socket PDU and mounting hardware packet.

IP BASE CLOSED-CIRCUIT TELEVISION [CCTV]

NS 180- Supply, Installation, Testing & Commissioning of Indoor Network Dome Camera, 120 dB Wide Dynamic Range, 3 IR LEDs with atleast 20 Metre IR Range, 1/2.7" Sensor, 2 MP Resolution, Focal Length of 2.7-12 mm, PoE, H.264,Triple Stream,Onvif S&G,UL(provision for 128 GB cards ).

NS 181- Supply, installation, testing and commissioning of CAT 6A UTP 1 MTR factory made or factory crimpped LSZH Patch cord Green colour.

ACCESS CONTROL SYSTEM

NS 182- Supply, installation, testing and commissioning of Biometric Fingerprint Reader with all accessories complete as required.

NS 183- Supply, installation, testing and commissioning of Access control management software with Time and Attendancxe Reports and Necessary Licences for Camera Integration with all accessories complete as required. The Software shall be integrated with BMS for transferring the critical alarms seamlessly.

NS 184- Supply, installation, testing and commissioning of ACS Workstation Intel® Quad Core, 2.8GHz or higher, 8 GB RAM, 100 GB free disk space, Dual Ethernet 10/100MBs, Software Requirements: * Microsoft Windows 10 (Enterprise) 64-bits * Microsoft .NET Framework v4.0 * Microsoft SQL Server. * SQL Server 2012 Enterprise Edition / SQL Server 2014 / SQL Server latest

FIRE FIGHTING WORKS

HYDRANT SYSTEM - PIPING WITH ACCESSORIES

NS 185- Providing, fixing, testing & commissioning of SS spring loaded air relief valve for pressure of 16 kg/sqm of approved quality with SS isolation valve, tapers, G.I. pipes and specials etc. including making necessary screwed/ flanged joints by providing all jointing materials including painting and testing the joints to hydraulic pressures specified for pipes all complete as per drawings and as directed by the Engineer-in-Charge.

a) 25 mm dia

NS 187 - Providing and fixing Cast Carbon Steel / forged brass CS Ball valve (Hyd. Test pressure body 30 kg/cm2 & seat 21 kg/cm2) of the following size: (Cost inclusive of providing necessary union / flange connection).

a) 50 mm dia

NS 188 - Providing and fixing inspectors test assembly complete with test valve, sight glass sectional drain valve, union with corrosion resistant orifice all complete strictly include with tender BOQ. Note:Test assembly with test valve, sight glass sectional drain valve, union with corrosion resistant orifice all complete work should be executed by specialized agency. The agency/contractor shall submit of shop drawings for Test assembly details of construction etc. for approval and according to the approved shop drawing a sample of each of system submitted for preliminary inspection for sample approval. After that the sample should be fixed at site to ascertain its performance. Large scale manufacturing should be taken up only after rectification of defects in sample as directed to the full satisfaction of the department / PMC and after obtaining formal approval of the same.

a) 50 mm dia

NS 189 - Providing & fixing indoor type hose lockable cabinet frames fabricated from 40 x 40 x 5 angle iron sections and 16 gauge MS sheet with full front glass door and locking arrangement, suitable to accommodate landing valves, 15 m long hoses, first-aid hose reel and branch pipe nozzle & fire mans’ axe. The cabinet frame shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade, as required (Approx 2.1 m (high) x 0.9 m (wide) ). The item shall be complete of MS housing with front door. (Cost shall be inclusive of providing break glass box containing key for the cabinet along with hammer).

NS 190 - Providing and fixing standard firemans axe with heavy rubber handle.

NS 191 - Supply, Installation, Testing and Commissioning of Electrical Control Panel in common cubicle with suitable compatmentation for Booster Pumps mentioned in sl.nos 2.01 above as per requirment of the drives and with auto on/off logic and operational sequence as per specifications with all meterial, accessories, instrumentation etc.complete.( GA drawing including circuit diagram shall be submitted by the contractor and to be approved by the Owner/consultant before fabrication of the control panel). Note : Cost shall be inclusive for approval of fire hydrant & sprinkler system from local fire authority and Fire Emergency services and any other relevant statutory authority at initial & various other stages of works, including preparation of report / drawings as per fire authority. Contractor shall include cost of all liaison works which are not explicitly mentioned above but are mandatory to have fire authority approval (any statutory charges will be reimbursed as per actual upon production of the invoice / challan informer of the owner..

NS 192 -Providing & fixing 150 mm dial type Pressure gauge of (0-16kg/cm2) range with gun metal shut off cock etc. duly calibrated before installation in MKS and FPS units and fixing the same where required as directed including all fittings, short piece, nipples, elbows testing the joints etc.all complete. (Quantity of this item will be payable only where it has not been included in the relevant composite items).

NS 193 - Fire Survival Cable (For Booster Pumps at Roof Level of Building) Supply and Termination of Fire Survival Cables as per BS 7846, Stranded Annealed Bare Copper Conductor /950° Mica Tape Wrapped/Cross Linkable Zero Halogen Insulation/Cores Laid up together/Fibre Glass Tape Wrapped/Zero Halogen Inner Sheathed/GI Wire Strip Armoured/ Zero Halogen Outersheathed of 1.1KV grade as required. 4 C x 16 sq.mm

NS 194 - Providing Fire stop mortar system, with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814 standards, for horizontal openings in floors or slabs after passing service lines like cables/cable bundles, cable trays etc. The mortar shall be a light weight cementitious product and shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall be age tested as per Dafstb and DIBT standards. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96. The product shall be age tested as per Dafstb and DIBT standards.The system shall be UL listed & classified and product shall bear the UL and FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer. A firestop submittal shall be produced by manufacturer , in accordance with approved passive fire protection method statement, for technical approval. Firestop Speciality Contractor needs to submitt work completition certificate along with installation report for periodic inspection & maintenance purpose. The gaps around inaccessible or complicated openings shall be sealed with exapnding firestop foam shall be paid under separate heads and as mentioned below.

NS 195 - Provide Acrylic Firestop Sealant in gaps between wall and slab made of concrete/masonary/gypsum on both sides of wall to provide minimum 2 hours fire rating when subject to the test conditions of UL 2079 & ASTM E 1966 standardswith Min. movement capability of +_12.5%. The product shall be age tested as per DafStb guidelines. Sealant should provide sufficient MAF, water and gas tight seal. Sealant shall also provide airborne sound transmission reduction (STC of 50) and shall be tested as per DIN 52210 for sound insulation. Sealant shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and should have a VOC content of approx. 75 g/l as per LEED 2009. The sealant shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The system shall be UL listed & classified and product shall bear the UL and FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with IFC guidelines shall be producted by manufacturer. A firestop submittal shall be produced by manufacturer , in accordance with approved passive fire protection method statement, for technical approval. Firestop Speciality Contractor needs to submitt work completition certificate along with installation report for periodic inspection & maintenance purpose.

a) 32mm dia

b) 40mm dia

c ) 50mm dia

d) 65mm dia

e ) 80mm dia

f) 100mm dia

g) 150mm dia

h) 200mm dia

PORTABLE CHEMICAL FIRE EXTINGUISHERS

Supply, installation, testing and commissioning of following types of Extinguishers with provision of wall bracket (fixed with anchor fastner).

NS 196 - 9 ltr. Water type stored pressure Fire Extinguisher filled with water of TDS 3 to 4 PPM, Applicable fire class A, UTGS Pressure Gauge, Gross Weight 12 Kg, empty weight 4.3 Kg, Can Height 575mm, Diameter 180 ± 10mm, Discharge Time 35 Sec, Controllable discharge mechanism, Jet Range 7 Meters, Average Discharge is 95%, applicable on Class A, Fire Rating- 2A, Can Construction : Deep drawn & CO2 Mig welded, Brass forged valve with safety Pin is of SS material, Controllable discharge mechanism with EPDM Hose & Nozzle, Internal Coating – Plastic Lining, External Coating - Pure Polyester Powder coating (UV Resistant), Sheet metal thickness : 2mm, construction as per IS 15683:2006 and ISI Marked.

NS 197 - 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI marked.

NS 198 - ABC Type Fire Extinguisher Cap. 4 kg Filled with Mono Ammonium Phosphate Powder 90% confirms to IS 14609, Stored Pressure Type, UGTS Pressure Gauge, Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 90%, applicable on Class A,B & C and electrically started Fire, A Rating- 3A, B Rating 21B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Sheet metal thickness : 1.8 mm, ISI Approved IS 15683:2006.

NS 199 - ABC Type Fire Extinguisher Cap. 9 kg Filled with Mono Ammonium Phosphate Powder 90% confirms to IS 14609, Stored Pressure Type, UGTS Pressure Gauge, Gross Weight 13.3 Kg, Empty Weight 4.3 Kg, Can Height 575 mm, Diameter 180 ± 10mm, Discharge Time 31 Sec, Controllable discharge mechanism, Jet Range 6 Meters, Average Discharge is 90%, applicable on Class A,B & C and electrically started Fire, A Rating- 4A, B Rating 89B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Sheet metal thickness : 2.0 mm, ISI Approved IS 15683:2006.

NS 200 - 45 ltr. Mechanical Foam type Fire Extinguisher filled with AFFF Foam (6%), Applicable fire class A&B, Gross Weight 87 Kg, Empty weight 37 Kg, Can Height 1285mm, Diameter 300 mm, Controllable Discharge mechanism, Discharge Time 40-180 Sec, Jet Range 10 Meters, Average Discharge is 90%, Fitted with EPDM Hose with SS spring of 300mm to avoid kink (3 meter long) & Air aspirated Nozzle, CO2 gas Cartridge of 300 gm. (Confirms to IS 4947), Can Construction : Deep drawn & CO2 Mig welded, External Pure polyester (UV Resistant) and Internal Epoxy polyester powder coated, Brass forged cap, construction as per IS 13386:1992 and ISI Marked.

NS 201 - Supplying and installing at approved location approved make pair of 4 nos.fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of supporting stand, hanging bars & hooks etc comply and painting providing MS stand duly painted over a coat of primer. (Distinctly identified as "WATER & SAND").

HVAC WORKS

GENERAL NOTES :

1. All items of work under this Contract shall be executed strictly to fulfill the requirements laid down under “Basis of Design” in the specifications. Type of equipment, material specification, methods of installation and testing and type of control shall be in accordance with the specifications, approved shop drawings and the relevant Indian Standards, however capacity of each component and their quantities shall be such as to fulfill the above mentioned requirement.

2. The rate for each item of work included in the Schedule of Quantities shall, unless expressly stated otherwise, include cost of :

a. All materials, fixing materials, accessories, appliances tools, plants, equipment, transport, labour and incidentals required in preparation for and in the full and entire execution, testing, balancing, commissioning and completion of work called for in the item and as per Specifications and Drawings.

b. Wastage on materials and labour

c. Loading, transporting, unloading, handling/double handling, hoisting to all levels, setting, fitting and fixing in position, protecting, disposal of debris and all other labour necessary in and for the full and entire execution and for the job in accordance with the contract documents, good practice and recognized principles.

d. Liabilities, obligations and risks arising out of Conditions of Contract.

e. All requirements of Specifications, whether such requirements are mentioned in the item or not. The Specifications and Drawings where available, are to be read as complimentary to and part of the Schedule of Quantities and any work called for in one shall be taken as required for all.

f. In the event of conflict between Schedule of Quantities and other documents including the Specifications, the most stringent shall apply. The interpretation of the Engineer incharge shall be final and binding.

3. All equipments, quantities and technical data indicated in this Schedule are for the Contractor’s guidance only, these are based on the documents prepared by the Services Consultant. This schedule must be read in conjunction with other documents. The Contractor shall be paid for the actual quantity of work executed by him in accordance with the approved Shop Drawings at the contract rates.

4. This Schedule shall be fully priced and the extensions and totals duly checked. The rates for all items shall be filled in INK including NIL items.

5. No alteration whatsoever is to be made to the text or quantities of this Schedule unless such alteration is authorised in writing by Client / Consultant. Any such alterations, notes or additions shall, unless authorized in writing, be disregarded when tender documents are considered.

6. In the event of an error occurring in the amount of the Schedule, as a result of wrong extension of the unit rate and quantity, the unit rate quoted by the tenderer shall be regarded as firm and the extensions shall be amended on the basis of rates.

7. Any error in totaling in the amount column and in carrying forward total shall be corrected. Any error, in description or in quantity, omission of items from this Schedule shall not vitiate this Contract but shall be corrected and deemed to be variation required by the Services Consultant/Project Manager.

8. The Contractor shall procure and bring Materials/Equipment to the site only on the basis of drawings approved for construction and shop drawings and not on the basis of Schedule of Quantities which are approximate only. This also applies to the Contractor’s requisition for Owner supplied materials.

9. The unit rate for all local equipment or materials in Indian Rupees shall include cost of equipment and materials including all taxes and duties and also including forwarding, freight, insurance and transport into Contractor’s store at site, storage, installation, testing, balancing, commissioning and other works required.

10.0 Rates shall be inclusive of all sundries whether it is mentioned in BOQ/ specification or not. Rates to be quoted for complete SITC for the purpose stated in the basis of design.

11.0 Rates shall be inclusive of breaking and opening of wall, chasing of wall & floor for drain and making them good including finishing and paintaing upto client satisfaction. Cost of sealing of all air gaps opening with UL/FM approved fire sealant rate for 250C for 2 hours shall also be considered.

NS 202 - Supply, Installation, Testing and Commissioning and handing over of AHRI / Eurovent certified Aircooled Water Chilling M/C of 130 TR actual capacity minimum at operating conditions given below with multiple screw compressor operating on refrigerant R-134A driven by suitable KW semi hermetic / hermetic motor complete. : each motor having independent VSD, Air-Cooled condenser shall be Cu-Al Fin / Uni Metal Microchannel with post dipped electrostatically charged epoxy coating from factory, insulated flooded chiller complete with antifreeze thermostat, flow switch at chiller outlet, refrigerant piping, refrigerant & oil (First Charge), microprocessor based control panel, 1 " deflection spring isolators, flexible coupling, matching flanges, all interconnecting unit control and power wiring, starter panel, of suitable capacity all mounted on M.S. frame. Chiller Unit and Compressor shall be of same make. The motors shall be suitable for 415 volts ±10%, 50 Hz ± 5 %, three phase AC supply. etc. as required & as per specification and drawings.

VFD starter suitable for each compressor motor complete with ammeter with CTs, over load protection, under voltage protection against phase reversal & independent single phase preventors etc complete as required.

1 Set- Lubrication device consisting of automatic electric oil pump oil cooler, oil strainer, automatic pressure regulating valve, oil heater, oil heater thermal switch etc.

1 Lot- Refrigerant piping fitting, valves and accessories to inter connect compressor, condenser, chiller and expansion valve.

1 Set - IP 54 Microprocessor based control panel complete with accessories as per specifications.

Lot- Water flow switches at inlet and outlet of chiller, water drain & air purge valves wherever required.

Lot- Suction line and chiller thermal insulation, flexible coupling etc. as required.

Lot-refrigerant gas & compressor oil

Air Entering Temp. to the Condenser - 35 ºC

Chilled water In/Out (12.22 C/ 6.66 °C)

Lot, RCC foundation for the Chiller.

Actual chiller capacity shall be as under:

Min COP at AHRI Conditions: 3.1, includig condenser fans

Max IkW/TR ( Including fan power) at full load : 1.2 inclusive of Condenser Fans

Chiller Foulning Factor - 0.0005 FPS

Sound pressure level at 3 m from the unit under operation : 77 db(A) maximum

Chiller manufacturer shall submit AHRI certified chiller performance sheet indicating above performance

Third party BMS Compatibility: Required Hardware & Software

PRIMARY CHILLED WATER VARIABLE SPEED PUMPING SYSTEM.

NS 203- Supply, installation, testing and commissioning of Primary chilled water variable speed pumping system, comprising of the following and complete as required and as per specification/drawings.

3 No. (2 W + 1 SB), Vertical in line Split Coupled (with rigid metal coupling between pump shaft and motor shaft) centrifugal pumps set with outside balanced mechanical seal, complete with suitable HP, TEFC IE2 induction motor with class ‘F’ insulation operating on 415 ± 10% volts, 3 phase, 50 cycles AC supply for each pump, with Integrated Motor Mounted VFD (IP 55 rated), complete with other accessories, suction guide, coupling Guard, High tensile steel shaft, Bronze impeller, Differential pressure sensor, flexible coupling, Supports and Corrosion-resistant finish, etc. & all necessary accessories as per relevant std. Pumps shall be insulated with insulation of same material & thickness as the connected pipe. All other parameters as per the technical specifications, tender drawings and given in the tender. complete pumpset should be tested at manufacturing facility & test certificates shall be provided by the manufacturer.

1 No. Primary variable controller to control 3 nos. Pumps. The Pump Logic Controller shall have parallel pumping software, sensorless control, including interfacing amongst all components. A Sensorless program shall be added to the controller and set up at the factory to operate in parallel Sensorless mode for controlling pumps in parallel. It shall be capable of controlling modulating valve at By pass line. Micro-processor / any other controller for the VSPS shall be communicable over MODBUS/BACNET / IP protocol with the IBMS system for mapping / information sharing purposes. Dedicated stand alone separate controller has to be supplied by the pump manufacturer to offer a redundant operation of the primary VSPS , Controller should be supplied separately and not as a part of VFD . Controller should be offered with IP 54 protection.

3 Nos. adjustable integrated Frequency drives mounted over the pump motor ( motor mounted VFD) IP55.

VFD shall be capable to operate on Sensorless Control application along wth PVF controller, VFD shall display flow, head, power & frequency at all times.

Suction guide, Triple duty valves to be supplied by pump manufacturer for unit responsibility.

Lot, thermal insulation on the pump, Flexible coupling etc. as required.

Lot, dial type pressure gauges.

Lot, RCC foundation for the pump.

Pump Capacity

Flow Rate : 1181 LPM

Head : 30 Meter

Pump Minimum efficiency shall be 75%.

Note- Pump head is indicative only, final head has to be calcualted by Implementation contractor and has to get approval from client/PMC/ Consultant.

NS 204 - Supply, installation, testing and commissioning of factory built, cabinet type, horizontal CS Direct/Belt driven air handling units in double skin construction of following capacity at required static pressure complete with factory fabricated independent sections, housing the various components e.g. AMCA certified Backward/plug fan for prformance and noise, IE 2 motor suitable for operation on 415 ± 10% volts, suitable for o 3 phase, 50 Hz AC supply, pre filter section , fire retarding canvass connection with volume control dampers, mixing chamber, copper tube, aluminium finned chilled water cooling coil,thermostat and control wiring, drain connections , 150 mm SS Dial type Temperature Gauge glycerine filled 0-50 deg C range with SS stem & all other mounting accessories, SS thermowell of Greystone Make or equivalent., 150 mm SS Dial type pressure gauges glycerine filled, range 0-8 bar with Ball Valve, syphon tube, required sensors, switches etc. for BMS integration,. All other parameters as per the technical specifications given in the tender. Hanging arrangement with anti-vibration mountings etc. as required and as per "Schedule of equipment", specifications and drawings.

Chilled Water Coil (Row) = 4 each

TAG No.

AB-AH-GF-03,06 , AB-AH-1F-02,04 (Cooling Load KW/(TR)=17/(5), Air Qty(LPS)=566).

AB-AH-2F-03 (Cooling Load KW/(TR)=33/(10), Air Qty(LPS)=607).

NS 205 - Supply, installation, testing and commissioning of TFA Cum AHU complete with below mentioned details and enclosed technical specifications.

Draw through type construction

Construction - Double skin sandwich panel in construction 250mm thick with PUF insulation Inner skin shall be 0. 8 mm thick GI and outer skin shall be 0.80 mm thick PPGI. The Casing of the unit shall be AHRI certified (As per AHRI 1350)

Supply and Exhaust AMCA certified Blower - Forward /Backward curve / Plug Fan with Motor of suitalble capacity, IP 44 VFD, IE 2 motor suitable for operation on 415 ± 10% volts, suitable for o 3 phase, 50 Hz AC supply

Filter section to have G4 (pr filter) as per specifications.

Heat Recovery Wheel for an effectiveness of minimum 75%. The performance of the HRW shall be AHRI certified and the HRW shall have and AHRI stamp. For single Point responsibility the complete unit I.e the casing and wheel shall be from single manufacturer.

Mixing Box, Inspection section 6 RD Chilled Cooling Coil with section to be provided as per specifications

Fire retarding canvass connection with volume control dampers, mixing chamber, copper tube, aluminium finned chilled water cooling coil,thermostat and control wiring, drain connections , 150 mm SS Dial type Temperature Gauge glycerine filled 0-50 deg C range with SS stem & all other mounting accessories, SS thermowell of Greystone Make or equivalent., 150 mm SS Dial type pressure gauges glycerine filled, range 0-8 bar with Ball Valve, syphon tube, required sensors, switches etc. for BMS integration,. All other parameters as per the technical specifications given in the tender. foundation arrangement with anti-vibration mountings etc. as required and as per "Schedule of equipment", specifications and drawings.

2 way PIBCV Valve with an equal percentage/linear flow characteristics with modulating actuators for cooling coils of Air handling units. Valves shall be duly insulated with same material as on pipe, PN16 rated, along with, necesary wirings and transformer, complete in all respect, as required and as per specification. The actuator versions should be directly mounting on valves without any adjustments. All the electrical actuator shall be operated through 24 V AC and should be modulated through control signals 0…10 VDC, 4….20 mA, or 0…1000 ohms The actuators should have stroke position indication and manual override mean to manual open and close the actuators when commissioning.

TAG No.

a) AB-AH-GF-01 (Cooling Load KW/TR=101/(29), Air Qty(LPS)=3757)

b) AB-AH-GF-02 (Cooling Load KW/TR=65/(19), Air Qty(LPS)= 1879)

c) AB-AH-GF-04 (Cooling Load KW/TR=103/(29), Air Qty(LPS)=3894)

d) AB-AH-GF-05 (Cooling Load KW/TR=64/(18), Air Qty(LPS)=1807)

e) AB-AH-1F-01 (Cooling Load KW/TR=139/(40), Air Qty(LPS)=4891)

f) AB-AH-1F-03 (Cooling Load KW/TR=145/(41), Air Qty(LPS)=5342)

g) AB-AH-2F-01 (Cooling Load KW/TR=139/(40), Air Qty(LPS)=4887)

h) AB-AH-2F-02 (Cooling Load KW/TR=143/(41), Air Qty(LPS)=5229)

NS 206- Supply, installation, testing and commissioning of Hi wall type split AC direct expansion indoor units of following capacities complete with evaporator, condenser, cooling coil, condenser coil, fans, Rotary compressor, control wiring, Refrigerant pipe with EPDM insulation on required width cable tray, remote control unit, suitable automatic voltage stabiliser(s), with high/low voltage cut-out and time delay relay, Auto Sequential panel for equal run time , insulated GI/UPVC condensate drain piping, unit mounting stands requisite power and control cable etc.as required and as per specification & drawings.

1.5 TR ( Minimum BEE 3 Star)

NS 207 - Supply, installation, testing and commissioning, of duct mounted Inline fans complete with direct/belt driven centrifugal fan, TEFC squirrel cage induction motor, heavy gauge sheet metal casing, rubber isolator mounts, concrete foundation/ hanging arrangement and other accessories, complete as required and as per specification. fan shall be AMCA certified for sound and performance. Inline fans shall be of following capacities:

a) 800 LPS, Static 15 mm of WG

b) 850 LPS, Static 15 mm of WG

c ) 200 LPS, Static 10 mm of WG

NS 208- Supply, installation, testing and commissioning of tube axial fan with adjustable pitched aluminium alloy impeller, TEFC squirrel cage induction IE2 motor with class 'F' insulation motor,1400 RPM direct drive arrangement, GSS/MS sheet metal casing, and other accessories as required and as per specification, drawings of following capacities as per Schedule of Equipment.:

Fan assembly shall be statically and dynamically balanced to G 2.5 grade as per ISO 1940.

Fan shall be AMCA certified.

LIFT WELL PRESSURIZATION

TAFP-T-01/02, 2442 LPS, Static 15 mm of WG

NS 209 - Supply, installation, testing and commissioning of tube axial fan with adjustable pitched aluminium alloy impeller, TEFC squirrel cage induction IE2 motor with class 'H' insulation high temprature motor,1450 RPM direct drive arrangement, with fire rated canvas connection, GSS/MS sheet metal casing, and other accessories as required and as per specification of following capacities as per Schedule of Equipment.

Smoke spill application (Exhaust fans) suitable for 250/300ºC operating temperature for 120 minutes as per standard BS EN12101-03,2015 and tested and certified by an independent international fire laboratory. The fan shall be CE marked/stamped.

Fan assembly shall be statically and dynamically balanced to G 2.5 grade as per ISO 1940.

Fan shall be AMCA certified.

Fan assembly shall be statically and dynamically balanced to G 2.5 grade as per ISO 1940.

Fan should be AMCA certified.

CORRIDOR AND LOUNGE PRESSURIZATION

a) TAFS-GF/1F/2F-01/02, 3966 LPS, Static 10 mm of WG

b) TAFE-T-01/02, 7932 LPS, Static 10 mm of WG

NS 210 - Supply, installation, testing and commissioning, of wall/window type exhaust propeller fan with mounting ring, arm, impeller, motor with class ‘B’ insulation, IP- 40 Motor, capacitor, support, pressed steel wall frame, vibration isolators, fixed type aluminium louvers with bird screen, nut bolts for use on 220/240 volts, single phase, 50 Hz, power supply with all accessories, ancillary work, Sound level should not exceed 36 dB(A) at 3m, epoxy powder coating etcas required and as per specifications.

250mm dia. RPM ≤ 1400

PIPING

NS 211 - Supply, laying/fixing, testing and commissioning of following sizes of chilled water MS ERW heavy class piping confirming to IS:1239/IS:3589 with necessary clamps, supports, anti-vibration mountings, hangers and fittings such as bends, tees, reducers etc. (but excluding valves, strainers, gauges, etc.) duly insulated with CFC free machine cut shiplap joint pipe section polyurethane foam of density 36± 2 kg/m³ with approved adhesive of low VOC, wrapped with imported glass cloth of 10 mil with two times protective coating as required and as per specifications & drawings.

a ) Dia 200 mm

b ) Dia 150 mm

c) Dia 125 mm

d) Dia 100 mm

e )Dia 80 mm

f) Dia 65 mm

g) Dia 50 mm

h) Dia 40 mm

i) Dia 32 mm

Burried Piping

NS 212- Supply, laying/fixing, testing and commissioning of following sizes of chilled water MS ERW heavy class piping confirming to IS:1239/IS:3589 with necessary clamps, supports, anti-vibration mountings, hangers and fittings such as bends, tees, reducers etc. (but excluding valves, strainers, gauges, etc.) duly insulated with CFC free machine cut shiplap joint pipe section polyurethane foam of density 48± 2 kg/m³ with approved adhesive of low VOC, claded with HDPE as required and as per specifications& drawings. The cost shall be including digging, laying and fixing make them good as required and per drawing and specifications.

a ) Dia 200 mm

b) Dia 150 mm

c ) Dia 125 mm

CONDENSATE DRAIN PIPING

NS 213 - Supply, installation, testing and commissioning of condensate drain UPVC piping as per BIS 4985 with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick class O NItrile foam as per the drawing and specifications.

a) 40 mm dia

b) 32 mm dia

c ) 25 mm dia

VALVES & STRAINERS

Supply, installation, testing and commissioning of following valves, strainer, in the chilled water piping complete with companion flanges/thread, nuts, bolts, gaskets, supports, etc. duly insulated, painted as required and as per specification & drawings.

BUTTERFLY VALVES

NS 214 - Supply,installation,testing and commissioning of wafer type butterfly valve of rating PN16 complete with insulation & all accessories and all other parameters as per the technical specifications given in the tender. Valves 150 and above dia shall be Gear operated. Seat shall be integral moulded with EPDM. disc shall be of SS304.

a) 125 mm dia

b) 100 mm dia

c ) 80 mm dia

d) 65 mm dia

e ) 50 mm dia

f) 40 mm dia

g) 32 mm dia

BALANCING VALVES

NS 215 - Supply,installation,testing and commissioning of balancing valve of rating PN16 with pressure test cocks only in SS -410 Stem, EN-3 Disc and EPDM sealing disc, complete with insulation & all accessories and all other parameters as per the technical specifications given in the tender.

a) 125mm dia

b) 100 mm dia

c ) 80 mm dia

d )40 mm dia

e ) 32 mm dia

CHECK VALVES

NS 216 - Supply,installation,testing and commissioning of Dual plate Non return valve of cast iron 210 Gr., Plates - SS410, Hinge/ Stop Pin SS- 316/304 with EPDM seal, PN 16 rating complete with insulation & all other parameters as per the technical specifications given in the tender

a ) 125mm dia

STRAINERS

NS 217- Supply,installation,testing and commissioning of CI 86-93 Grade A, Bolted Cover, SS -304 screen, Y-Type Strainer with permanent magnet. complete with insulation & all accessories and all other parameters as per the technical specifications given in the tender

a ) 80 mm dia

b) 65 mm dia

c ) 50 mm dia

d) 40 mm dia

e ) 32 mm dia

AUTOMATIC AIR VENT

NS 218 - Supply,installation,testing and commissioning of Automatic Air vents with required ancillaries. All other parameters as per the technical specifications & drawings.

a ) 10 mm dia

BALL VALVE

NS 219 - Supply,installation,testing and commissioning of Ball valves of PN 16 Rating with insulation. All other parameters as per the technical specifications given in the tender

a) 10 mm dia

b) 20 mm dia

GATE VALVE

NS 220 - Supply,installation,testing and commissioning of Gun metal gate valves as per IS -778, Pressure Class -2, screwed in Bonnet, Integral seat, solid wedge, with asbestos/ Hemp & Jute gland packing etc. of PN 16 Rating with insulation . All other parameters as per the technical specifications given in the tender

a) 25 mm dia

2 WAY VALVE

NS 221- 2 way PIBCV Valve with an equal percentage/linear flow characteristics with modulating actuators for By pass line. Valves shall be duly insulated with same material as on pipe, PN16 rated, along with, necesary wirings and transformer, complete in all respect, as required and as per specification. The actuator versions should be directly mounting on valves without any adjustments. All the electrical actuator shall be operated through 24 V AC and should be modulated through control signals 0…10 VDC, 4….20 mA, or 0…1000 ohms The actuators should have stroke position indication and manual override mean to manual open and close the actuators when commissioning.

a) 50 mm dia

EXPANSION BELLOW

NS 222- Supply,installation,testing and commissioning of Expansion Bellows with required insulation PN 16 rating . All other parameters as per the technical specifications given in the tender

a ) 125 mm dia

EXPANSION TANK

NS 223 - Supply, installation, testing and commissioning of 1200 lit. open type expansion tank unit in MS construction , thermal insulation and necessary valve and fittings with matching flanges, drain valve etc. as required and as per specification & drawings.

AIR SEPERATOR

NS 224 - Supply, installation, testing and commissioning of minimum 125 PSI Centriufugal / Micro bubble air and dirt seperator with matching flanges of 200 dia , valves, Auto Airvent, Insulation, as required and as per specification & Drawing. Air seperator shall be on tri pad stand grouted on PCC foundaton.

DUCTS, FITTINGS & AIR TERMINALS

DUCTING

NS 225 - Supply, installation, testing, balancing and commissioning of factory fabricated GSS Rectangular/Round ducting of following thickness including necessary supports, hangers, nut bolts, gaskets, splitter dampers, vanes, canvas connections etc. complete . as per SMACNA standard along with all accessories and fitings. The prices shall also include necessary galvanized duct supports consisting of fully threaded galvanized rods, galvanized angles or double-L bottom brackets, nuts, washers and anchor bolts (Hilti make) generally conforming to SMACNA/IS standards etc. as required and as per specification & drawings.

FLEXIBLE DUCTING

NS 226 - Supply, Installation testing & commissioning of Preinsulated flexible duct to be made with inner core of triple lamination of aluminum foil, polyester and Metalized Polyester film permanently bonded to a coated spring steel wire helix. Fiberglass insulation of minimum 16 kg/cu.m density, 25 mm thickness shall be wrapped over the inner core & covered with strong outer jacket cum vapour barrier made of fibre glass reinforced metalized polyester film laminate. The prices shall aslo include necessary duct supports, fittings and accessories for fixing of duct etc. as required and as per specification and drawing. The sizes of flexible duct as below.

a ) 250 mm dia

NS 227 - Supply and fixing of acoustic lining with 25 mm thick mineral wool density 48 kg/cum confirmimg to IS : 8183-1993 wrapped in glass cloth on the inner side of ducting including fixing in the aluminium frame work and finishing the same with Glass paper and covered with 0.63 mm perforated aluminium sheet etc. as required and as per specifications.

INSULATION

NS 228 - Supply and fixing of closed cell elastomeric self adhesive Nitrile rubber insulation on supply and return air duct as mentioned below:-

a ) Minimum 18 mm on Supply air duct

b ) Minimum 8 mm on Return air duct

AIR TERMINALS

NS 229 - Supply, installation, testing and balancing of box type GI Volume Control Damper 18 G Frame, 20 G Blades, with suitable links, levers and quadrants for manual control of volume of air flow for proper balancing of the air distribution complete as required and as per specification and drawings.

NS 230 - Supply, installation, testing and commissioning of GI Multi-leaf Fusible link Fire Dampers complete with chrome plated spindles in self lubricated bronze bushes, linkages etc. complete as required and as per specifications.

NS 231 - Supply installation testing and commissioning of Back draft dampers manufactured from Aluminium extrusions with blade pivot mechanism incorporates nylon bushes and stainless-steel pins etc. as required and as per specification and drawings.

NS 232 - Supply, installation, testing and commissioning of Motorised fire dampers with fire rated actuator, control panel approved by CBRI, Roorkee, as per UL -555, fire rating for 2 Hours.Price shall be inclusive of control module, related control wiring and stepdown transformer. Damper shall be with TDF flanges. Actautor shall be wired over MODBUS RS485/BACnet/Open protocol etc. as required and as per specification& drawings.

NS 233 - Supply, installation, testing, balancing and commissioning of square powder coated extruded aluminium Plaque air diffusers of various neck sizes complete as required and as per specifications.

a ) With Volume control damper

b ) Without Volume control damper

NS 234 - Supply, installation, testing, balancing and commissioning of Self adjusting exhaust vent valve in spinning steel construction etc. as required and as per specification.

a ) 125 mm dia

NS 235 - Supply, installation, testing, balancing and commissioning of powder coated extruded weather proof, aluminium Rain protection fresh/Exhaust air louvers with aluminium bird screen, as required and as per specifications and approved shop drawings..

i)76 mm depth (With Volume Control Damper)

ii)76 mm depth (Without Volume Control Damper)

NS 237 - Supply and fixing of acoustic treatment in AHU rooms and other areas as shown on drawings with 50mm thick resin bonded mineral wool of density 64 kg./m³ duly covered with glass paper & 26 Gauge perforated aluminium sheet complete as required and as per specifications.

NS 238 - Supply and fixing of underdeck roof insulation with 40mm thick polyisocyanurate machine cut shiplap joint slabs prelaminated with 0.05mm aluminium foil etc. as per specifications.

MECHANICAL SERVICES SWITCH BOARD

NS 239 - MSSB-01- Equipment Panel.

Supply, installation, testing and commissioning of following distribution boards totally enclosed compartmentalized, cubicle floor mounted, indoor type IP:42, fabricated with 2 mm thick sheet steel, with Aluminium bus bars (both for main and neutral bus bars), complete with switchgear/mountings cable terminations, inter-connections as required, for 415 volts, 3 phase, 4 wire 50 HZ AC supply as per specifications and single line drawings.

All Air Circuit Breakers shall be provided with Micro processor based Earth fault, short circuit and over current releases. Molded case circuit Breakers shall be thermal magnetic trip type. Fault level for all ACB and bus bar shall be 35 KA and MCCB fault level shall be 25 KA. ICU shall be equal to ICS=100%

Note : All metering current transformers shall be Class 0.5, 15 VA.

Incomer

a) 800 A 4P MCCB of 25KA– 1 No. withAPFC.

b) With MFM.with suitable rating of CT.

c ) ON/OFF/TRIP Indicating Lights with control fuses – 1 Set

d) ON/OFF push button with control fuses – 1 Set

e ) R, Y, B phase indicating light with control fuses - 1 set

Bus Bar

a ) 1200 A, 415V, 3ph, 4 wire Aluminium busbar

Outgoings

a) 630 A 4P MCCB - 02 No.

b )400 A 4P MCCB - 02 No.

c )100 A 4P MCCB - 02 No.

d ) 63 A 4P MCCB - 04 No.

NS 240 - MSSB-01A- Equipment Panel.

Supply, installation, testing and commissioning of following distribution boards totally enclosed compartmentalized, cubicle floor mounted, indoor type IP:42, fabricated with 2 mm thick sheet steel, with Aluminium bus bars (both for main and neutral bus bars), complete with switchgear/mountings cable terminations, inter-connections as required, for 415 volts, 3 phase, 4 wire 50 HZ AC supply as per specifications and single line drawings.

All Air Circuit Breakers shall be provided with Micro processor based Earth fault, short circuit and over current releases. Molded case circuit Breakers shall be thermal magnetic trip type. Fault level for all ACB and bus bar shall be 35 KA and MCCB fault level shall be 25 KA. ICU shall be equal to ICS=100%

Note : All metering current transformers shall be Class 0.5, 15 VA.

Incomer

a ) 630 A 4P MCCB – 01 No.

d ) ON/OFF/TRIP Indicating Lights with control fuses – 1 Set

e ) ON/OFF push button with control fuses – 1 Set

f ) R, Y, B phase indicating light with control fuses - 1 set

Bus Bar

a )1000 A, 415V, 3ph, 4 wire Aluminium busbar

Outgoings

a ) 630 A 4P MCCB - 04 No.

b ) 63 A 4P MPCB - 04 No.

c ) R,Y,B indication lamps with control fuses - 07 Sets

NS 241 - MSSB-01B- Equipment Panel.

Supply, installation, testing and commissioning of following distribution boards totally enclosed compartmentalized, cubicle floor mounted, indoor type IP:42, fabricated with 2 mm thick sheet steel, with Aluminium bus bars (both for main and neutral bus bars), complete with switchgear/mountings cable terminations, inter-connections as required, for 415 volts, 3 phase, 4 wire 50 HZ AC supply as per specifications and single line drawings.

All Air Circuit Breakers shall be provided with Micro processor based Earth fault, short circuit and over current releases. Molded case circuit Breakers shall be thermal magnetic trip type. Fault level for all ACB and bus bar shall be 35 KA and MCCB fault level shall be 25 KA. ICU shall be equal to ICS=100%

Note : All metering current transformers shall be Class 0.5, 15 VA.

Incomer

a ) 100 A 4P MCCB – 1 No.

d) ON/OFF/TRIP Indicating Lights with control fuses – 1 Set

e ) ON/OFF push button with control fuses – 1 Set

f ) R, Y, B phase indicating light with control fuses - 1 set

Bus Bar

a ) 150 A, 415V, 3ph, 4 wire Aluminium busbar

Outgoings

a ) 16 A TP MPCB - 13 No.

b ) 10 A TP MPCB - 04 No.

Star Delta / DOL starter with ON/OFF indicating light, ON/OFF push buttons, control fuses, timers, contractors, overload relay with built-in single phase preventer, control fuses, wiring, interconnections suitable for following rating motor.

a ) 2.2 KW Motor - 02 No.

b ) 1.1 KW Motor - 04 No.

c ) 0.08 KW Motor - 04 No.

d ) R,Y,B indication lamps with control fuses - 17 Sets

g) Space for VFD in panel for motors of folowing ratings

h) 5.5 KW Motor - 04 No.

NS 242 - MSSB-01C- Equipment Panel.

Supply, installation, testing and commissioning of following distribution boards totally enclosed compartmentalized, cubicle floor mounted, indoor type IP:42, fabricated with 2 mm thick sheet steel, with Aluminium bus bars (both for main and neutral bus bars), complete with switchgear/mountings cable terminations, inter-connections as required, for 415 volts, 3 phase, 4 wire 50 HZ AC supply as per specifications and single line drawings.

All Air Circuit Breakers shall be provided with Micro processor based Earth fault, short circuit and over current releases. Molded case circuit Breakers shall be thermal magnetic trip type. Fault level for all ACB and bus bar shall be 35 KA and MCCB fault level shall be 25 KA. ICU shall be equal to ICS=100%

Note : All metering current transformers shall be Class 0.5, 15 VA.

Incomer

a) 63 A 4P MCCB – 1 No.

b ) ON/OFF/TRIP Indicating Lights with control fuses – 1 Set

c ) ON/OFF push button with control fuses – 1 Set

d ) R, Y, B phase indicating light with control fuses - 1 set

Bus Bar

i) 100 A, 415V, 3ph, 4 wire Aluminium busbar

Outgoings

i )16 A TP MPCB - 08 No.

ii) 10 A TP MPCB - 02 No.

iii) Star Delta / DOL starter with ON/OFF indicating light, ON/OFF push buttons, control fuses, timers, contractors, overload relay with built-in single phase preventer, control fuses, wiring, interconnections suitable for following rating motor.

a) 2.2 KW Motor - 02 No.

b) 1.1 KW Motor - 02 No.

c) 0.08 KW Motor - 02 No.

iv) R,Y,B indication lamps with control fuses - 10 Sets

vii) Space for VFD in panel for motors of folowing ratings

a) 5.5 KW Motor - 02 No.

NS 243- MSSB-01D- Equipment Panel.

Supply, installation, testing and commissioning of following distribution boards totally enclosed compartmentalized, cubicle floor mounted, indoor type IP:42, fabricated with 2 mm thick sheet steel, with Aluminium bus bars (both for main and neutral bus bars), complete with switchgear/mountings cable terminations, inter-connections as required, for 415 volts, 3 phase, 4 wire 50 HZ AC supply as per specifications and single line drawings.

All Air Circuit Breakers shall be provided with Micro processor based Earth fault, short circuit and over current releases. Molded case circuit Breakers shall be thermal magnetic trip type. Fault level for all ACB and bus bar shall be 35 KA and MCCB fault level shall be 25 KA. ICU shall be equal to ICS=100%

Note : All metering current transformers shall be Class 0.5, 15 VA.

Incomer

a) 63 A 4P MCCB – 1 No.

b) ON/OFF/TRIP Indicating Lights with control fuses – 1 Set

c) ON/OFF push button with control fuses – 1 Set

d) R, Y, B phase indicating light with control fuses - 1 set

Bus Bar

i) 100 A, 415V, 3ph, 4 wire Aluminium busbar

Outgoings

i) 16 A TP MPCB - 07 No.

ii)10 A TP MPCB - 02 No.

iii) Star Delta / DOL starter with ON/OFF indicating light, ON/OFF push buttons, control fuses, timers, contractors, overload relay with built-in single phase preventer, control fuses, wiring, interconnections suitable for following rating motor.

a) 2.2 KW Motor - 01 No.

b) 1.1 KW Motor - 02No.

c ) 0.08 KW Motor - 02 No.

iv) R,Y,B indication lamps with control fuses - 09 Sets

vii) Space for VFD in panel for motors of folowing ratings

a) 5.5 KW Motor - 02 No.

NS 244- MSSB-01E- Equipment Panel. ( Emergency fire panel) Contractor to co-ordinate with fire contrctor for panel to energize in case of fire.

Supply, installation, testing and commissioning of following distribution boards totally enclosed compartmentalized, cubicle floor mounted, indoor type IP:42, fabricated with 2 mm thick sheet steel, with Aluminium bus bars (both for main and neutral bus bars), complete with switchgear/mountings cable terminations, inter-connections as required, for 415 volts, 3 phase, 4 wire 50 HZ AC supply as per specifications and single line drawings.

All Air Circuit Breakers shall be provided with Micro processor based Earth fault, short circuit and over current releases. Molded case circuit Breakers shall be thermal magnetic trip type. Fault level for all ACB and bus bar shall be 35 KA and MCCB fault level shall be 25 KA. ICU shall be equal to ICS=100%

Note : All metering current transformers shall be Class 0.5, 15 VA.

Incomer

a) 63 A 4P MCCB – 1 No.

b) ON/OFF/TRIP Indicating Lights with control fuses – 1 Set

c ) ON/OFF push button with control fuses – 1 Set

d) R, Y, B phase indicating light with control fuses - 1 set

Bus Bar

i) 100 A, 415V, 3ph, 4 wire Aluminium busbar

Outgoings

i) 16 A TP MPCB - 12 No.

ii) Star Delta / DOL starter with ON/OFF indicating light, ON/OFF push buttons, control fuses, timers, contractors, overload relay with built-in single phase preventer, control fuses, wiring, interconnections suitable for following rating motor.

a) 2.2 KW Motor - 02 No.

b) 1.1 KW Motor - 08 No.

iii) R,Y,B indication lamps with control fuses - 12 Sets

NS 245- Providing and fixing lockable type remote ON/OFF push buttons in suitable MS enclosure including mounting arrangement, etc. complete as required and as per specifications and drawings.

Bidder Name

Amount

Shree Gautam Construction Co. Ltd.(GSTN-NA)

GARG BUILDERS(GSTN-NA)

RDS Project Limited(GSTN-NA)

SOM PROJECTS PVT LTD(GSTN-NA)

RISHABH CONSTRUCTIONS PVT. LTD.(GSTN-NA)

Bidder Name

Amount

Shree Gautam Construction Co. Ltd.(GSTN-NA)

GARG BUILDERS(GSTN-NA)

RDS Project Limited(GSTN-NA)

SOM PROJECTS PVT LTD(GSTN-NA)

RISHABH CONSTRUCTIONS PVT. LTD.(GSTN-NA)

Bidder Name

Amount

Shree Gautam Construction Co. Ltd.(GSTN-NA)

GARG BUILDERS(GSTN-NA)

RDS Project Limited(GSTN-NA)

SOM PROJECTS PVT LTD(GSTN-NA)

RISHABH CONSTRUCTIONS PVT. LTD.(GSTN-NA)

RDS Project Limited

GARG BUILDERS

RISHABH CONSTRUCTIONS PVT. LTD.

Shree Gautam Construction Co. Ltd.

RDS Project Limited

GARG BUILDERS

RISHABH CONSTRUCTIONS PVT. LTD.

Shree Gautam Construction Co. Ltd.

GARG BUILDERS

RISHABH CONSTRUCTIONS PVT. LTD.

RDS Project Limited

Shree Gautam Construction Co. Ltd.

SOM PROJECTS PVT LTD

GARG BUILDERS

RISHABH CONSTRUCTIONS PVT. LTD.

Shree Gautam Construction Co. Ltd.

GARG BUILDERS

RDS Project Limited

Shree Gautam Construction Co. Ltd.

SOM PROJECTS PVT LTD

Shree Gautam Construction Co. Ltd.

SOM PROJECTS PVT LTD

RDS Project Limited

GARG BUILDERS