Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.9 CrAccepted-AOC 65 MODEL TOWN 136026 | KAITHAL | HARYANA | 136026 | ₹1.9 Cr | 1 | Accepted-AOC ok |
Tender Value
Refer Docs
EMD Value
₹4.4 L
Closing Date
23 May 2022, 5:00 pmClosed
Executive Engineer
Executive Engineer, Jind Water Services Division, Jind
Providing Brick pitching on both side of Nizampur Bhairon Khera Ramkali Link Drain from RD 0-4000 including pucca structure at RD 4000
2022_HRY_221522_1
7468
Open Tender
Civil Works
Works
300 days
Jind
Please refer Tender documents.
3 documents required · 3 mandatory
₹15,000
₹4.4 L
Yes
Jind Water Services Division, Jind
23 Dec 2022
16 May 2022
24 May 2022
16 May 2022
23 May 2022
16 May 2022
20 May 2022
Amount
Excavating, supplying and filling of local earth (including royalty) cum by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.HSR item 4.33
Dressing bed and preparation of sub grade side slope for lining HSR 14.2
Centering and shuttering including strutting, propping etc. and removal of form work forFoundations, footings, bases for columns HSR 6.29.1
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix andM-15 grade plain cement concrete (cement content considered @ 240 kg/cum) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge HSR 6.22.1.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). 6.25.1 All works up to plinth level
Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc HSR 6.29.2
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts HSR 6.30.6
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up to 20 mm, covered with sealant complete as per drawing and MoRT&H specifications HSR Item No. 27.51.3
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1 :3 (1 cement : 3 coarse sand
Supply & Carrage of Stone boulder of requisite size from approved quarry to the site of work as per PWD specification No. 3.31 of with 23.8 and 23.9 loading & unloading rehandding of quantities
Brick work with common burnt clay bricks of class designation 7.5 in mud mortar
12 mm cement plaster 1:4 (1 cement : 4 stone dust) HSR 11..5.3
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer HSR 11.67.1
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade HSR 11.78
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level Cold twisted bars HSR 6.34.3
Providing and fixing in position caution iron board 4'x3', 500' U/s & D/s 500' from diversion of channel (NS item )
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1 :2 (1 cement : 2 fine sand) including testing of joints etc. 900 mm dia RCC pipes HSR ITEM no.21.95.8
Providing and laying 60mm thick factory made cement concrete inter1ocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge HSR 10.76
Providing and laying after material below lining Old HSR Item No. 28.5
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar HSR Old Item No. 8.5 (b)
Dismantling CC 1:2:4 roofing over wooden karries or R.C.C. cum battens (dismantling karries and battens to be paid for separately), including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Old HSR Item No. 8.6 (d)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per Nominal concrete 1: 1.5:3 or richer mix Old HSR item No. 8.6 (a)
Removing hume pipes-NP 2/NP 3/NP 4 including excavation and taking out the pipes manually/ by mechanical means and stacking the pipes within standard lead as per direction of Engineer-in-charge above 600 mm dia HSR item no 5.53.2
Supply and fixing 150mm dia perfoted pipe(In mtr.)
Supply and filling gravel 15 to 20 mm size in circular from 1.0' to 1.5' dia
Supply and fixing 90mm dia PRVS
Credit for surplus earth
Credit of old steel
Credit for old and dismentled brick work
Credit of RCC hume pipes
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .