REPAIR/ REPLACEMENT OF ROOF TREATMENT, PLUMBING, SANITARY FITTINGS AND OTHER MISC WORK AT AGE B/R-IV UNDER GE (MCTE) MHOW

Amount

Easing of door shutters for easy closing/ opening by tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts etc with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutters, drawers incl fixing of screws, adjusting handles, knobs, tightening piano hinges incl misc small adjustments complete all as specified and directed.

Fixing only in repair loosed wooden pelmet boxes in position by using plug/ wooden gutties embedded in wall, making good in CM (1:3), fixed with suitable MS holder clips complete incl tightening of screws etc in all respect length of each pelmet n exc 2.5m complete all as specified and directed.

S&F, in repair 25mm dia curtain rod of mild steel chromium plated,with fixing brackets stops rollers etc complete all as specified and directed.

S&F, in repair MS chromium plated bracket holders for curtain rod 25mm dia and fixed with screws to pelmet boxes complete all as specified and directed.

S&F, in repair fancy type mild steel prepainted decorative type rods 20-25mm bore, cut to length as required, of colour as approved complete all as ssspecified and directed.

S&F, in repair mild steel painted brackets with fancy type end knobs suitable for draprery rod of same colour of suitable dia complete all as specified and directed.

S&F, in repair double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

S&F, in repair aluminium anodized hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate, fixed with screws, of 100mm size complete all as specified and directed.

S&F, in repair door closer aluminium (Die Cart) body hydraulically regulated designation No-2 suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed

S&F, in repair 150mm dia CP Towel Ring complete all as specified and directed.

S&F, in repair corner shelf assembly 300mm consisting of 8mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and directed.

S&F, in repairs butt hinges 100mm size, medium weight, mild steel cold rolled, welded to angle iron or pressed steel chowkat complete all as specified and directed.

S&F, in repair 18/19mm thick prelaminated particle board of exterior grade prelaminated decorative one side and other side balancing white laminated fixed with screws as in cupboard shutters, shelves and pelmet boxes incl 6mm thick teak wood liping all around complete all as specified and directed.

S&F, in repair mild steel helical door spring 300mm long stove enamelled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F, in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed.

S&F, in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples or wooden beads or with pins in steel window complete all as specified and directed.

S&F, in repair aluminium anodized barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and directed.

S&F, in repair extruded aluminium alloy handles, fabricated type, 150mm size complete all as specified and directed.

Hacking out old broken glass (any size, quality or description) from wooden or steel frames at any height fixed with beads or putty complete all as specified and directed.

S&F, 3mm thick plain sheet glass ordinary quality and galzing with oil putty or wooden beads in squares, n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F, 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.Jaquar Cat Part No CON-CHR-107KN & techno communally equivalent tlid/ Marc, Plumber, Cera

S&F in repair 15mm dia brass chromium plated long neck pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed.

S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. Make : Jaquar Cat Part No CON-CHR-273KNUPR & techno communally equivalent tlid/ Marc, Plumber, Cera

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. Make : Jaquar Cat Part No CON-CHR-273KNUPR & techno communally equivalent tlid/ Marc, Plumber, Cera

S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed.

S & F in repairs Stop/angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S&F, in repair 15mm bore PVC stop valves complete all as specified and directed.

S&F, in repair 15mm bore PVC bib taps complete all as specified and directed.

S & F in repairs two way Bib cock/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S&F, in repair PVC cover for Over head water tank of capacity 500 Ltr and 1000 Ltr complete all as specified and directed.

S&F, in repair 15mm bore brass CP spreader for urinal suitable for 15mm bore pipe complete all as specified and directed.

S&F, in repair PVC waste pipe for WHB 32mm dia 1150mm long complete all as specified and directed.

S&F, in repair PVC waste pipe for Sink 40mm dia 1150mm long complete all as specified and directed.

S&F, in repair rubber or PVC door seal 900mm long complete all as specified and directed.

S&F, in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density polyethylene ball screwed for 15mm bore pipes complete all as specified and directed.

All as per Srl item No. 39.00 here in before, but suitable for 20mm bore pipe complete all as specified and directed.

All as per Srl item No. 39.00 here in before, but suitable for 25mm bore pipe complete all as specified and directed.

S&F, in repair PVC connection 15mm size with PTMT nuts at both ends, of length 450mm complete all as specified and directed.

All as per Srl item No. 42.00 above, but of length 600mm complete all as specified and directed.

S&F, in repair 75mm dia chromium plated shower rose, fancy type, fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long Flexible Tube & ABS Wall Hook complete all as specified and directed.

S&F, in repair waste fitting brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

All as per Srl item No. 46.00 above but 40mm dia for sinks complete all as specified and directed.

S&F, in repair waste fitting 40mm dia of PTMT suitable for stainless steel kitchen sink complete all as specified and directed.

S&F, in repair 10 Ltr capacity PVC low level flushing cistern complete with syphon, handle, lever, float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

S&F, in repair 125mm/ 100mm dia mild steel chromium plated grating fixed on floor trap/ nahni trap in cement mortar 1:6 complete all as specified and directed.

S&F, in repair vitreous china squatting pan, white, Orissa pattern, size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap, connected to outgoing pipe and flush pipe, making good floor portion to match with the existing surface of floor complete all as specified and directed.

S&F, in repair vitreous china wash down water closet pan (pedestal pattern), white, excluding flushing cistern & flush pipe incl connection to out going pipe and flush pipe complete all as specified and directed.

S&F, in repair plastic water closet seat with cover, white/ black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F, in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed.

S&F, in repair fitting of galvanized iron medium grade such as socket, elbow, nipple of different sizes, equal or unequal Tee, union, reduce etc for 15mm bore pipe complete all as specified and directed.

S&F, in repair fitting of galvanized iron medium grade such as socket, elbow, nipple of different sizes, equal or unequal Tee, union, reduce etc for 20mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal from site for 20mm bore pipe complete all as specified and directed.

S&F in short lengths 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in short lengths 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F, in repair brass spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed.

S&F, in repair CP Toilet paper holder complete all as specified and as directed.

Supply only Integral water proofing compound (BIS Marked) complete all as specified and directed.

S&F, in repair brass chromium plated jet spray with flexible pipe length not less than one metre (min) fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair glass shelf 8mm 60cm long thick including bracket complete all as specified and directed.

S&F in repair WHB brackets cast iron, prepainted of required size complete all as specified and directed.

S&F in repair PVC low level flushing cistern internal kit fitting with syphon, handle, lever, float valve complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and as directed.

S&F in repairs PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and as directed.

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as specified and as directed.

S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified and as directed.

S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.Brothers, Diamond

S & F in repairs Stainless Steel Wall Mount Case with Soap Holder & Brush Holder fixed to wall complete all as specified and as directed.

S&F in repairs 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed.

S& F in repairs 100mm size MS mat/ glossy finish handle complete all as specified and as directed.

S&F in repairs modular type stainless steel basket of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.

S&F in repair heavy duty wall mixer legs,brass elbow,brass socket, short pices, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed.

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc. 1 Sqm but n. exc 2 Sqm each of any description complete all as specified and directed.

S&F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side) : supplied and fitted to chowkat complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc. making good holes and distrub area in cement mortar (1:3) complete all as specified and as directed.

S&F Pressed steel door frame for single door, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc. making good holes and distrub area in cement mortar (1:3) complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with reinforced with MS square tube, S&F in opening as per specification & drawing with prelam sheet all as on drawing on Srl page No 178 of SSR Part-II complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles and top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour Prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site complete as per specification & drawing

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles, complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 25mm thick plain cement concreat 1:2:4 type B-0 using 12.5mm graded stone aggregate as in base floor or maintain to even surface complete all as specified and directed.

All as per Srl item No. 102.00 but on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No. 104.00 but on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land, complete all as specified and directed.

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per Srl item No. 110.00 but on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough to receive the tiles complete all as specified and directed.

M & L for mirror polising of old kota stone complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty all as directed by Engr-in-Charge.

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling,chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash all as directed by Engr-in-Charge.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

Dismantling PVC water tanks 1000 litres capacity, complete all as specified and directed.

Dismantling PVC water tanks 500 litres capacity, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F powder coated anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremesh including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finishes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc all as specified and directed by Engr-in-Charge.

S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter - 01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber - 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work of water tank and similar works conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description etc. complete all as specified and directed.

S&F rolled sections as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar grade FE-410, (gde-E-250) quality complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including Nainital or similar pattern Roof covering, complete all as specified and directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and directed.

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc. complete all as specified as directed.

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as specified and directed by Engr-in-Charge manufactures specification.

S&F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. complete all as specified and directed.

Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed.

M&L for 10mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 40mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical mixed in proportion of 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chhaja and roof kerbs/ benching complete all as specified and directed.

M&L for water proofing treatment on non approachable/ non accessible roof surfaces (Horizontal/ vertical) in following sequences through manufacturer/ authorised applicator of the manufacturer complete all as specified and directed complete. (a) Properly cleaning and drying cemrnt surfaces. (b) Applying one coat of oxidized bitumen based solvent primer @ 0.3Kg/sqm. (c ) Laying 3mm thick APP modified water proofing membrane with 100mm over laps sealed & bonded to the surface by torchon method. (d) Applying two coats of bituminous aluminium paint @ 200 gram/sqm(minimum).

M&L for cement concrete tiles 25cm x 25cm x 22mm thick machine pressed, set jointed and pointed with neat cement slurry on roof and cut and polished over and including 15mm thick screed bedding in cement mortar (1:4), complete all as specified and directed.

BHATIA ASSOCIATES (BID ID -3509480)

M/s. Shubh constructions (BID ID -3510492)