WBPHED/EE/CMD/eNIT14/S01

Amount

Supply and delivery of Residual Chlorine Measurement (Clear Water) Analyzer : Electrode, Digital functionality with Inductive Data Transmission from Sensor to Transmitter Diaphragm: PTFE , Signal transmission: Digital. Reference system: Gel., Conductivity: min 50uS/cm Temperature sensor integrated. Transmitter liquid analysis for Chlorine Digital sensors; Memosens protocol, In built Digital Display, Input: 1x Memosens Sensor, Supply: 230VAC/24V DC Plug &Play for sensors modules, SD-slot data logger, alarm relay, Protection: IP66 Input: 1x Digital Sensor, Output: 1x 4-20mA , Supply: 24V DC Flow Fit Assembly along with Standing Sample Handling Panel Make: ABB/ Endress+Hauser India Pvt. Ltd / approved make

Installation of the above mentioned Chlorine Measurement analyzer with supplying of fixing materials all complete as per direction of EIC.

Supply and installation of the following items for installation of Actuator operated butterfly valve at Delivery Line of OHR.

Electrically gear operated, double flanged cast Iron butterfly valves conforming to IS: 13095, having body, disc and end cover in graded cast Iron to IS:210 Gr FG 260, Nitrile rubber face ring secured on disc by a SS AISI 304 retaining ring with stainless steel screws, the rubber ring seating on a corresponding SS AISI 304 seat in body, stub shaft of SS AISI 410 riding in teflon bearings. Flanges drilled to IS 1538 Table 4 & 6. Valves suitable for a working pressure of 10 kg/cm² (seat test) & body tested to 15 kg/cm². Valves are complete with Rotork/ Syncropak/AUMA/ Epak Electrical Actuator with starter.make-IVI/approved make

MS Short piece, double flanged (DN 200 to 250) suitable size to match Dismantling joint & the newly supplied BFV all complete set as rewired

Head stock complete within the extension Rod & coupling as per direction of EIC

Pressure Gauge 0-10 kg/cm2 , 6" dia complete with necessary piping

Hardwares as required including earth strip & gaskets

12 core 1.5 sq. mm copper cable for actuator motor. (Make: Gloster/Havells/Polycab/approved)

Supply, delivery at site and storage wall mounted PLC operated Panel (for operating 3 nos Actuator) made of sheet steel fabricated 2 mm for load bearing &1.6 mm for non load bearing, indoor type, dust & vermin proof, lP-54 degree of protection, powder coated painted with rubber gaskets cover, front lockable hinged door with all Switchgear and other items duly wired up and tested as per specification. Consisting 16 Amp TP MCB-3 Nos, 6 Amp DP MCB-3 Nos, Push Button Switch with NO, NC Contact- 9 nos, Indicating light- 12 nos, Auto/ manual Switch, SMPS, PLC, UPS 600VA, Logic contactor etc. (Panel make, all spare & components as per vendor list of PHED).

Installation of the all supplied items,fitting & fixing after welding of all head stock by fastners,cable laying, termination, panel fixing and earthing all complete.

Supply & fitting fixing necessary GI medium pipe (dia of pipe not less than 32mm) protection for actuator cable from control panel to actuator including supply of all specials and complete the job.

Labour Charges for boring throught any kind of soil by auger boring horizontally with water zet system including hire and labour charges with supply of suitable dia cashing pipe upto a depth of 1mtr.below G.L.and laying including necessary joints,tools& plants,staging tank ,pump set and making necessaryarrangment for boring and cost of withdrawing the same and laying in bore hole G.I/C.I pipes etc. all complete as per direction of EIC.

i) 80mm dia and upto 100mm dia.

Commissioning of the entire installation after testing the same in all variable and normal mode as per direction and to the entire satisfaction of EIC.

Supply and installation of Flowmeter.

Supply, delivery and storage at site Full Bore Electromagnetic Flowmeter DN 200,Protection IP 68 (Minimum inbuild 20 meter cable,factory potted) ,Full bore type Electro Magnetic Flow meter with smart Transmitter (Volume Flow rate output : 4-20mA HART Output and totalizer pulse output:0.05 cum/Pulse) with LCD 4 line backlit display ,calibration lab as per ISO 17025,Accuracy .5% +/- 2mm/sec,measuring,reference & empty pipe detection electrode with Polyurethane/Hard rubber liner,supply: 24 v DC or 230VAC.(Make-E ndress Hauser/ approved make).

Supply, delivery and storage at site, 10kg/cm2 rating M.S. delivery Pipes with required bends, reducer, tee, fittings, specials, flanges, bolts, nuts, gaskets etc. as required to make the installation complete in all respects.

DN-200 mm (thickness 10 mm)

Supply, delivery and storage at site suitable M.S. dismantling joints as per NIT Specification.

DN-200 mm., PN-1.0 rating.

Construction of inspection chamber with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for inspection of flowmeter all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified] i)200 mm Dia pipe

Installation of the above mentioned electromagnetic flow meter with laying of cable and supplying of other fixing materials as per direction and to the entire satisfaction of EIC.

Supply and installation of Pressure Transducer.

Supply, delivery and installatation of Pressure Transducer along with PLC with controlling programme to Operate Pump motor by sensing signal of water level in OHR including making all electrical connections & testing complete as per direction of EIC. (Panel make: ECS/ PHE approved make.)

Supply and Installation of TATA make including necessary sockets,

G. I. pipes (25 mm dia). (Medium quality)

galvanised iron socket with I.S.I. mark (25 mm dia.).

G.I. plug (25 mm dia.)

G.I. reducing socket (25 mm dia.)

G.I. bend. (25 mm dia.)

G.I. plain equal elbow (25 mm dia.)

G.I. plain tee (25 mm dia.)

25 mm dia G.M Gate valve (Make : Leader / Zollata)

Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete (Make- H. Guru)

Yard Lighting arragement at head works site-

Supply & delivery of following materials at sites :-

GRP street light pole in conical shape using thermoset resign having minimum 65% glass content with following specifications : Length – 7 mtr. Top I.D – 85 + 2 mm. Bottom I.D – 176 + 2 mm. Thikness – 5 + 0.5 mm. Type – Non buried (above ground) The above pole is provided with suitable size MS base plate, foundation bolt & nut set, internal junction box & MS ring arm [Make -Fibro Plastichem / EPP/ PHE approved] (Test certificate will be submitted at the time of delivery) [Installation will be done based on the site condition]

16 sq. mm 2 core 1.1 KV grade XLPE insulated Al. armoured Cable conforming to IS:7098 (Part-I) 2011 with upto date amendments. [Make- Gloster/ Mescab/ Currency/ Crystal/ Polycab/ PHED approved Make] (materials should be supplied as per actual site condition)

100W LED flood light luminarie with IP 65 protection. [Make: Philips (Type- BVP)/ Havells/ PHED approved make]

Making RCC foundation (as per drawing & measurement provided by GRP Pole manufacturer) for pole erection by using suitable reinforcement & concrete grade M20 inlcuding making provision looping cable line, excavation & refilling of earth pit with shifted soil & ramming properly as per specification & direction of EIC .

Laying of one no 16 sq.mm. PVC Al. Ar. cable in underground trenche 460mm. wide X 760mm. average depth, with brick protection on the top of the cable with 8 (eight) nos. bricks per mtr, including filling the space between the brick & cable & also the trench with shifted soil, levelling up & restoring surface duly rammed.

Laying 16 sq.mm. PVC Al. Ar. Cable through pump house wall including supply of sockets for clamping and grouting the above cable in each pole foundation (Approx 10 mtr length)

Supply & delivery of outdoor type Kiosk box (Size: 10"x 6"x12") with suitable gauge M.S. sheet along with hinged type front door with locking arrangement including M.S leg angle frame covered consisting 3 way Aluminium busbar 63 amp. fixed on a Porcelain material and grouting its legs in rick piller.

Installation of above supply Kiosk bok (item no.-6) and making brick/PCC foundation (Size: 14"x 10"x 18") with supplying bricks/stonechips, sand, cement etc including plastering and neat cement & making electrical connection complete as per direction EIC

Supply & drawing of 2 X 2.5 sq. mm and 1 x 1.5 sq. mm (for earthing) FR PVC insulated 1.1 KV grade single core copper cable (PHED. approved make) from pole junction box to LED fixture at the top of the pole and making electrical connection complete

Erection of GRP pole on RCC foundation with help of MS base plate, foundation bolts, nuts, washers etc. and fitting & fixing of four (4) nos. flood light luminaris on pole ring arm with necessary inter connection and jointing of cable and testing complete of entire set as per direction EIC

Earthing of Loop Box by spike earhing (20mm X 2 mtr.) with drawing 8 SWG GI wire as per IE rule.

Supply & fitting fixing 16 Amp. SPN MCB (Make-Havells/ Siemens/ ABB/L&T) with enclosure & 16 Amp Piano key type Switch with pvc box inside the pump house wall and making connectin with supply cable for operating the compund light with supply necessary materials all complete as per direction of EIC.

Supply and fitting fixing of 45 watt. LED light fixture set [Make: Philips (Type- BRP)/ Havells/ PHED approved make] with 40 mm dia x 1.5 mtr. long G.I pipe fixed on the top of the iron structure frame with clamping arrangement including making power connection with supply & drawing 2.5 sq. mm FR grade flexible copper wire through PVC casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), S&F of 15 amp switch with pvc board including electrical connection & testing complete as per direction of EIC.

Sign Board work -

Supply, delivery, fitting fixing of nomenclature made from improted acrylic sheet letter of different sizes with different colours as per choice of EIC. The subject matter as directed by EIC shall be fixed on iron structure of size (10' x 6') and should be fitted on MS Angle (Size- 65 mm X 65 mm X 6 mm ) and ISMC 100 with epoxy coated including all necessary civil work after grountig the MS frame on the roof of the buildung and making necessary pillers, plasters, neat cement finissing & painting of iron structure etc to complete the work as per direction of EIC including supplying all required electrical materials. Colour type and colour letter & graphics will be as per direction of EIC. [Each board 60 sq. ft. for H.W site]

Supply and fitting fixing of 45 watt. LED light fixture set [Make: Philips (Type- BRP)/ Havells/ PHED approved make] with 40 mm dia x 1.5 mtr. long G.I pipe fixed on the top of the iron structure frame with clamping arrangement including making power connection with supply & drawing 2.5 sq. mm FR grade flexible copper wire through PVC casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), S&F of 15 amp switch with pvc board including electrical connection & testing complete as per direction of EIC.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 30 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

iii) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) by fine sand

Cement concrete with graded Stone ballast (40 mm size) excluding shuttering. a) 6:3:1 proportion in ground floor & foundation.

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material.[Border concrete if necessary to be paid separately].Note: Sub-grade CBR should not be less than 5 . 60 mm thick interlocking designer concrete paver block M 35 grade for light-traffic zone, comme rcial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course &250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base,sub-base course & subgrade prepa ration.) Coloured Decorative

Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]. Red Variety. i) 25 mm. thick

Add. GST@18%

Add. Cess@1%

C M ENTERPRISE (BID ID -5720764)

MITRA ENTERPRISE (BID ID -5731875)