8895/GWL/E8 CERTAIN REPLACEMENT/REPAIR TO ROOF TREATMENT AT TPT LINE, 3rd LANCER AND OTHER CERTAIN LOCATION IN THE AREA OF AGE B/R-I UNDER GE GWALIOR

Amount

Dismantling of asbestos cement (corrugated, semi-corrugated) etc sheets in roof covering including ridges etc complete all as directed.

S & F for pre-painted galvalume aluminum zinc coating GI based double ribbed trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified directed.

M&L for 6mm thick asbestos cement, corrugated or semi - corrugated sheets in roofs, walls and fixed with L-type or screws J-type bolts etc complete all as specified and as directed.

M&L for Asbestos cement one piece plain angular ridge 6mm thick fixed with L-type bolt complete all as specified and as directed.

Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F rolled sections Fe-290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates, wind tie, trush etc complete all as specified and as directed.

M&L for Dismantling of AC ceiling board any descrition complete all as specified and directed.

S& F in repair, E grid frame work for false ceiling consists of GI angle 25x25x1.5 mm and Tee 38x25x1.5 mm of size and grid 605x605 mm complete all as specified and directed.

S&F, in repair 4 mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic) decorative finish, fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.

Supply and laying 15 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

Supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

S&F, 15mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and as directed

S&F, 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and as directed

S&F, 25 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and as directed

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc, laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L for vitrified, light coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in CM (1:4 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for vitrified, light coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for non skid ceramic tiles, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:4) complete all as specified and directed.

M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms, urinal partition etc includigng rounding off the exposed edges and polishing all as specified and directed.

M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20mm -25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) in any postion complete all as specified and as directed.

M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) Type C2 using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 over brick wall, concrete surfaces, finished even and smooth (without using extra cement) all as specified and as directed.

M&L for 15 mm thick rendering on brick wall surfaces in CM 1:4 finished fair and even with WPC treatment all as specified and as directed.(Note:- WPC shall be measured separtly)

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

S&F chicken wire mesh with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperature 1.18mm all as specified and directed.

Cutting out cracks to 'V' section in existing roofs or tarracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coat of oil bound distemper on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coat of cement based paint over a coat of primer complete all as specified and directed.

Taking down exiting tarfelt with cement plaster on roof including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed

M&L 10 mm thick rendring with CM (1:3) over roof etc surface surface even and smooth complete all as specified & directed.

M & L Plain cement concrete (1:2:4) type B0 using 12.5 mm graded stone agg as levelling course/mass concrete/edge of pathway etc complete all as specified and directed.

M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions)

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified complete all as specified and directed with following descriptions : - (a) Applying evenly a coat of bitumen primer confirming to IS 3384-1965 @ 0.30 kg/sqm. (b) Laying of APP modified membrane with 100 mm over lap in longitudinal direction and 100 mm in transverse direction.

M& L for applying aluminium paint for roof top surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed

M & L for cement concrete tiles 25cm x 25xm x20-22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished, rubber moulded with grey cement and no pigment over and including 15 mm thick scrred bed in CM 1:4 complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes bends any radious \ complete all as specified and directed.

S&F for 75 mm dia PVC(SWR)pipes bends any radious. complete, complete all as specified and directed.

S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.

S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in positioncomplete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for as in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F for in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed.

S&F for in repairs PVC Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms complete all as specified and directed.

S&F in repair for in repairs15mm,pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed .

S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in repair for 15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

M/S YOGANSH CONSTRUCTION CO.

BHAGIRATH CONSTRUCTION COMPANY

M/S SANJAY AGARWAL

M/s Ratan Lal Jain and Co.

M/s Subhash Construction Co.

M/s Anjali Construction

Babatia super works

M/s Tirupati construction

Arkay Instrumentation