Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 CrAccepted-AOC 491 28 4TH FLOOR TOWNE CENTRE MALL BEHIND D PARK MODEL TOWN NEAR POLICE CHOWKI ROHTAK 124001 | ROHTAK | HARYANA | 124001 | ₹39.0 Cr | L1 | Accepted-AOC Awarded |
| 2 | L2₹39.5 CrRejected-Finance 81 ARYA NAGAR ASSANDH ROAD PANIPAT HARYANA 132103 | PANIPAT | HARYANA | 132103 | ₹39.5 Cr | L2 | Rejected-Finance Rejected |
| 3 | L3₹46.2 CrRejected-Finance 37 205 A 2 A 1 BUNDHU KATRA GWALIOR ROAD AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | ₹46.2 Cr | L3 | Rejected-Finance Rejected |
| 4 | L4₹46.5 CrRejected-Finance 279 A 22 SONIPAT ROAD ROHTAK 124001 HARYANA | ROHTAK | ROHTAK | HARYANA | 124001 | ₹46.5 Cr | L4 | Rejected-Finance Rejected |
| 5 | L5₹46.8 CrRejected-Finance C 57 C 59 GROUND FLOOR RAMESH NAGAR DOUBLE STOREY OPP METRO STATION NEW DELHI 110015 | WEST | DELHI | 110015 | ₹46.8 Cr | L5 | Rejected-Finance Rejected |
Tender Value
₹41.6 Cr
EMD Value
₹83.3 L
Closing Date
12 Aug 2024, 2:00 pmClosed
PARVEEN KUMAR
Division - Sewerage
Providing and laying of Master sewer lines and construction of M.Hs etc. complete in Sector 99 to 115, Gurugram
2024_HRY_391765_1
20249EA7CEB7 D97D 4398 95D8 B08827B8277E717001
Open Tender
Civil Works
730 days
Gurugram
Providing and laying of Master sewer lines and construction of M.Hs etc. complete in Sector 99 to 115, Gurugram
2 documents required · 2 mandatory
₹1,180
₹83.3 L
Yes
Plot No. 3, Sec-44, Gurugram
13 Mar 2025
19 Jul 2024
12 Aug 2024
19 Jul 2024
12 Aug 2024
19 Jul 2024
25 Jul 2024
Amount
NS Item / Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 :2003(with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all dressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 600mm i/d RCC Np3 pipe
NS Item / Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 :2003(with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all dressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 800mm i/d RCC Np3 pipe
NS Item / Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 :2003(with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all dressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 1000mm i/d RCC Np3 pipe
Providing, lowering, jointing and testing of RCC Np3 pipe 3mm HDPE Lining with rubbering roll on joints confirming to in all respect to IS 458 : 2003 (with latest amendments if any) in to trenches for all depth laying out the same to correct alignment , gradient levels including all dressing ,trimming cutting of complete beds joints, holes ,supporting the pipes and specials incorrect positioning a suitable rigid manner which the same one being jointed with the surrounding benching hands involves are completed .The dimension of sewerage system for rubbering roll on joints shall be as per table 9,10,11,14 of ISI specification No. 458/2003. Each pipe shall bear the ISI certification work. The pipe shall on bed at all points through out their length to ensure this may should granted wherever necessary including carriage loading ,unloading, stacking at convent point, complete in all respect as per respective item of HSR to the entire satisfaction of Engineering-in- Charge. 1200mm i/d RCC Np3 pipe
Providing, lowering, cuttinhg, jointing and testing RCC pipe Class - Np3 with HDPE lining as per IS 458 - 2003 with spigot and socketted joints manufactured with ISI marked Sulphate Resistance Cement as per ISI 12330 with rubber rings ISI marked, antitermite as required at site, into trenches, for all depths and laying out the same to correct alignment, gradients and levels including dressing and trimming and cutting of concrete beds and sides of trenches, if required, jointing with rubber rings in trenches and jointing with 1: 11/2 cement sand mortar and with end dowels filled with 1:1 1/2 cement sand mortar and finishing the joints at an angle of 45 degree with faces of spigot of socket joints cutting and finishing the cut surface including cartage, loading and unloading and CCTV survey after laying of pipe line for inspection and checking the levels, straightness, jointing of pipe line complete in all respect. 900 mm i/d RCC pipe NP3
Making connection of proposed master sewer line to existing master sewer line including all material and labour etc. complete in all respect
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 4.5 m but not exceeding 6.00 m
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 6.0 m but not exceeding 7.50 m
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 7.5 m but not exceeding 9.00 m
Providing and laying of welded M.S pipe manufactured with M.S. sheet of Jindal / TATA / SAIL/ Welspun / SKS/PSL (P) Ltd and MAAN industries as per IS 2062, IS:3589-2001 including bituminous paint on outer side with thickness 120micron on inner side and anti corrosive epoxy paint on inner side as per relevant specification and IS code including welding and Laying the pipe through trenchless technology by pipe jacking to cross the carriage way including maintain level with the help of laiser guided equipment, excavation of thrust and receiving pit, side shoring, filling back, compaction, disposal of surplus earth including generator, JCB, cranes, pipe jacking machine etc. all material and labours as per requirement, direction of Engineer-in-Charge and complete in all respect including the cost of Ground Penetration Radar Survey including cost of stringing pipes jointing and cutting and CCTV survey after laying of pipe line for inspection and checking the levels, straightness, jointing of pipe line complete in all respect to the entire satisfaction of the Engineer -in -Charge. 1500mm i/d M.S. Casing pipe (15mm sheet thickness) for 1000 mm i/d RCC pipe NP3
Bidder Name
Amount
Subhash Infraengineers Pvt. Ltd. (GSTN-06AANCS5001K1ZB) BID ID -1133434
M/s K. R. ANAND (GSTN-06AADPA9956E1ZT) BID ID -1135489
Ram Narain Jain Contractor (GSTN-06ACLPJ0885F1ZK) BID ID -1136165
jain construction co. (GSTN-06AAEFJ4717B1ZT) BID ID -1137912
Narender Singh Contractor (GSTN-06AXBPS0272N1Z8) BID ID -1138687
kapil engineering company (GSTN-NA) BID ID -1135771
PULKIT PROJECTS PRIVATE LIMITED (GSTN-NA) BID ID -1137856
M/s Mahashiv Promoters Pvt. Ltd. (GSTN-NA) BID ID -1133426
M/s K. R. ANAND (BID ID -1135489)
M/s Mahashiv Promoters Pvt. Ltd. (BID ID -1133426)
jain construction co. (BID ID -1137912)
Narender Singh Contractor (BID ID -1138687)
kapil engineering company (BID ID -1135771)
Subhash Infraengineers Pvt. Ltd. (BID ID -1133434)
PULKIT PROJECTS PRIVATE LIMITED (BID ID -1137856)
kapil engineering company (BID ID -1135771)
M/s Mahashiv Promoters Pvt. Ltd. (BID ID -1133426)
jain construction co. (BID ID -1137912)
M/s K. R. ANAND (BID ID -1135489)
Narender Singh Contractor (BID ID -1138687)
PULKIT PROJECTS PRIVATE LIMITED (BID ID -1137856)
Subhash Infraengineers Pvt. Ltd. (BID ID -1133434)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid