Special repair to Dr RKGMC Hamirpur HP

Amount

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable and disposal of unserviceable material within all leads complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dismantling roofing including ridges,hips, valleys, gutters, G.S. sheet etcetra stacking the serviceable materials and disposal of un-serviceable materials within all leads and lifts complete and stacking them including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within all leads including entire carriage of material within all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dismantling steel work in built up sections in angles, tees, flats and channels including gusset plates, bolts, nut cutting rivets, welding etcetra including dismembering and stacking complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete design mix concrete M-20 (M-Twenty) 20 mm (Twenty millimetre) nominal size in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera up to all floor level, including the cost of centering, shuttering and finishing as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/ SAIL/ Apollo/ JSW Make ) in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, door and window frames, guard bar, ladder, railings, brackets, gates and similar works complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised iron profile sheets (TATA/ SAIL/ Apollo/ JSW Make ) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( zero point five zero millimetre) + 0.05 % ( plus zero point zero five percentage) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Ridges plain (TATA/ SAIL/ Apollo/ JSW Make ) 500 - 600mm ( five hundred to six hundred millimetre) precoated galvanised steel sheet roofing accessories 0.50 mm ( zero point five zero millimetre) + 0.05 % (plus zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Crimp curve precoated galvanised steel sheet roofing accessories (TATA/ SAIL/ Apollo/ JSW Make ) 0.50 mm ( zero point five zero millimetre) + 0.05 % ( plus zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per sqm as per IS: 277, in 240 ( two hundred forty ) mpa steel grade, 5-7 (five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 15 cm (Fifteen centimetre) wide, 45 cm (Forty five centimetre) overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm (Forty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes 0.80 mm (Zero point eight zero millimetre) thick with zinc coating not less than 275 gm/m² (Two hundred sevventy five gram per square metre) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing mild steel Black sheet (1.66( one point sixty six) mm to 2.00 ( Two point Zero) mm thick)ornamental chhaja over standared steel section with bracket of hollow ornamental square bar of 50mm (Fifty millimetre) size including flushing with wall & chajja ,over M.S.BP sheet 20(Twenty ) mm size MS square bars at the rate 5 (five) centimeter centre to centre longitudinal complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/ Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC plain bends complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing 110 mm (One hundred ten millimetre) diameter unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes (Finolex/ Supreme) by means of 50x50x50mm (fifty into fifty into fifty) millimetres hard wood plugs, screwed with mild steel screws of required length,including cutting brick work and fixing in cement mortar 1:4 ( one cement: four sand) and making good the wall including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Galvanised iron clip in Metal ceiling system of 600x600mm (six hundred into six hundred) millimetres module which includes providing and fixing C. wall angle of size 20x30x20mm (twenty into thirty into twenty) millimetres made of 0.5mm (zero point five) millimetres thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm (three hundred) millimetre centre to centre suspending the main C carrier of size 10x38x10mm(ten into thirty eight into ten) millimetres made of galvanised iron steel 0.7mm (zero point seven) millimetre thick from the soffit cleat 37x27x1.6mm(thirty seven into twenty seven intoone point six ) millimetre rawl plugs of size 38x12mm(thirty eight into twelve) millimetre and C carrier suspension clip and main carrier bracket at 1000mm (one thousand) millimetre centre to centre inverted triangle shaped spring tee having height of 24mm(twenty four) millimetre and width of 34mm( thirty four) millimetre made of galvanised iron steel 0.45 (zero point four five) millimetre thick is then fixed to the main C carrier and in direction prependicular to it at 600mm (six hundred) millimetre centres with help of suspension brackets. Wherever the main C carrier and spring T have to join C carrier and spring T connections have to be used. All sections to be galvanised @ 120 gms/sqm ( one hundred twenty gramme per squaremetre) (both side inclusive) fixing with clip in tiles into spring T (Monard Profile) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

P/F thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3 ( twenty four kilogramme per cubic metre) 50mm thick ( fifty millimetre thick) wrapped in 200 ( two hundred) G Virgin Polythene bags, fixed to ceiling with metallic cleats 50x50x3 mm ( fifty into fifty into three millimetre) @ 60 cm ( at the rate of sixty centimetre) and wire mesh of 12.5 mm x 24mm ( twelve point five into twenty four millimetre) gauge wire mesh, for top most ceiling of building including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Demolition and dismantling of old roofing steel structures including trusses, purlins, rafter, CGI sheet etcetera complete in all respect. Disposal of serviceable and unserviceable material from the site including its carriage upto all leads and lifts. The site should be made clear from all the dismantled material before the execution of New roofing structure.The minimium reserve price for the dismantled material is Rs. 803513/ ( Rupees eight lacs three thousand five hundred thirteen) . The rates quoted by the bidder should not be less than the minimium reserve price.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

MAHIPAL GOVT CONT