Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹42.1 L+₹12.7 L (43.3%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (AF) THOISE
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
REPAIR AND ROUTINE MAINTENANCE OF 500 KVA AND 400 KVA DG SET INSTALLED AT OLD POWER HOUSE IN SUMMER SEASON UNDER GE (AF) THOISE
2023_MES_585800_4
GEAF/T-05/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GARRISON ENGINEER (AF) THOISE
As per Tender Document
7 documents required · 7 mandatory
₹500
GE AF Thoise
₹80,000
Yes
22 Aug 2023
15 May 2023
5 Jun 2023
15 May 2023
3 Jun 2023
16 May 2023
Amount
Carrying out servicing/maint of 500/400 KVA DG set, Make : 'Sudhir CS500D5P or As availalbe at site' including 'B' check as per manufacturers mannual through authorised dealer of DG set manufacturer of existing DG Make and testing of DG set complete all as directed by Engineer-in-Charge. Note :- All material/spares parts required for carrying out above maintenance/servicing shall be measured and paid separetely as 'Supply only' items as mentioned below and shall be of make- 'Sudhir CS500D5P or As availalbe at site' as per make of DG set and labour element required for replacing the spares parts including replacement of minor spare parts which are essential for carrying out servicing/maintenance of DG sets shall deemed to be included in the unit rate quoted by the tenderer against item No.1 above. (i) Any minor parts such as screws, washers, split pin , circlip etc shall be supplied by the firm, rate for the same shall be deemed to be included in the unit rate quoted. (ii) The Job shall be carried out after every two hundred hrs run of DG Set and shall be measured and paid separatly, no of times carried out during entire period of contract . (iii) The Item Include Servicing and cleaning of radiater and taking down fuel tank and cleaning and removel of scale and sludge.
Supply only Lub oil filter cartrige
Supply only Diesel filter insert
Supply only Diesel filter paper
Supply only Fuel pre filter
Supply only Air clean element primary
Supply only Air clean element secondary
Supply only Hose pipe & Flexible pipe complete set.
Supply only Fan belt for water pump (make-Fenner/Poly-F/ Roulunos).
Supply only Fan belt for alternator dynamo (make-Fenner/ Poly-F/Roulunos).
Repair/servicing of radiator assembly with intercooler of 500/400 KVA DG Set make Sudhir CS500D5P or As availalbe at site' after dismantling and removing cooling fans, guard plates and lowering the same from engine after draining out coolent from radiator and scrapping / removing sludge / scale inside tank with acid including replacement MS tank (botom portion) at rusted portion by cutting/ welding / brazing with 2mm thick copper plate including painting. Remounting the same at its original position and repalcement of pre mixed coolant as per the ratio fixed by manufacturer and testing complete all as directed by Enginer-in-Charge. Note- (i) Pre mixed coolent shall be measured and paid separately under relevant item of schedule (ii) The Job shall be carried out after every two hundred hrs run of DG Set and shall be measured and paid separatly, no of times carried out during entire period of contract.
Dismantling and opening of turbo charger assembly of 500/400 KVA DG Set and repair/overhauling and replacement of turbo charger kit and all type of spare parts including refixing, testing complete all as directed by Engineer in Charge. Note: The Job shall be carried out after every two hundred hrs run of DG Set and shall be measured and paid separatly, no of times carried out during entire period of contract.
Dismantling and taking down alternator assembly from existing engine and transporting to workshop and carry out servicing / maintenance of alternator unit of capacity 500/400 KVA DG set as per the phase work :- (a) Opening of Alternator and cleaning / remvoing dust from armature and field coil. (b) Cleaning of used / old lubricated substances drive/non drive end bearings. (c) Cleaning end cheeking of AVR unit (d) Cheking and tighting of coupling bolts and replacement of rubber inserts. (e) M&L for carrying out heat varnishing for field and armature coil and kept in heating chamber for 48 hours for drying properly. (f) Replacement of Bearings as per existing size. (g) Reassembling complete unit and carrying out testing at workshop and transportation to installation and coupling with DG Set including necessary alignment, cable connections all as specified and directed by Engr - in Charge.
Rewinding of armature with super enamelled copper of required size wire including varnishing, sleeves, cotton tape and heating etc. for DG Set of capacity 500/400 KVA, complete all as specified and directed by Engr-in-Charge.
Disconnecting & taking out of existing control panel of any description and in any position, of 500/400 KVA capacity DG set & opening of Panel, checking AC/DC circuits and replacement control wiring with exiting specification , single core, copper conductor, flexible, PVC insulated, unsheathed cable suitable upto 1100 volts confirming to IS-694, taking out, removing and replacement of unserviceable parts / spares / items, reassembling the panel & fixing the same in position and testing the panel on full load after completion of repairs complete all as specified and directed by Engr-in-Charge.
Taking out carefully unserviceable fuel injector Nozzle & Injection pump assembly of 500/400 KVA DG set , cleaning/ oiling/servicing fuel injector pump assembly, recalibration of Fuel Injector Pump and nozzle after repairing unserviceable nozzles, re-assembling and fixing the same in position and testing the Fuel Injector Pump assembly all as specified and directed by Engineer-in-Charge. Note: (i) Repairs/servicing / reassembling and testing of Fuel injector & injection pump shall be carried out through a authorised service center on fully automatic testing machine. (ii) The quoted rates against the item shall deem to includ for fixing and replacing of the serviceable parts in position and replacement of unserviceable parts with new parts, such as nuts, bolts, washers, locking nuts,’O’ rings, nozzle, plunger, barrel, governor plunger, pressure regulator, weight carrier assembly, spring pack assembly, gear pump repair kit etc.New spare parts deemed to be included rates. (iii) The quoted rates shall deemed to be included cost of transportation to and fro authorized service centre. (iv) The Job shall be carried out after every two hundred hrs run of DG Set and shall be measured and paid separatly, no of times carried out during entire period of contract
Disconnecting and taking out the exhaust system of DG set of any capacity and carrying out cleaning of chocked, carbonized exhaust pipe including exhaust .silencer with de-scaling solution, including soldering / gas welding of leakage of pipe. Cutting the rusted portion of pipes including gas welding of pipes assembling the complete exhaust assembly including replacement of gasket, metallic flexible pipe, nut bolts, and testing for making it leak proof and fixing the same in position and testing the system complete all as specified and directed by Engr-in-Charge. Note: The Job Can be Carried out After 200 Hrs.
S&F in repair/ replacement of Self starter/Cranking motor, auto lock, 12/24V of existing make Sudhir CS500D5P or As available at site on the 500/400 KVA DG Set and taking out u/s self starter from DG set complete all as specified and directed by Engr-in-Charge.
S&F in repair/ replacement of Alternater for battery charging, , 12/24V of existing make Sudhir CS500D5P or As available at site on the 500/400 KVA DG Set and taking out u/s self starter from DG set complete all as specified and directed by Engr-in-Charge.
S&F in repair/replacement of turbo charger assembly of 500/400 KVA DG Set make Sudhir CS500D5P or As available at site testing complete as directed by Engineer in Charge.
S&F in repair /Replacement of water pump and replacement of water kit and water seal and connected item of 500 KVA DG Set complete all as specified and directed by Engr-in-Charge.
S&F in repair/ replacement of control unit/ panel including all accessries and mounting incl base card of 500/400 KVA DG Set installed at Power House complete all as specified and directed by Engr-in-Charge. Make Sudhir or as available at site.
S&F in repair/Replacement AVR unit suitable for DG set upto 500/400 KVA capacity Make Sudhir CS500D5P or As availalbe at site complete all as specified and directed by Engr-in-Charge.
S&F in repair/ Replacement MCCB, three pole, 415 Volts, adjustable thermal and fixed magnetic setting, 500 Amps with breaking capacity 50 KA, having indicating lamp, Ics=100% Icu and as per IEC 60947-2, complete all as specified and as directed by Engineer-In-Charge. Make: L&T/ Legrand/ ABB/ Merlin Gerin/ Siemens/ Havells/HPL
S&F in repair/ Replacement MCCB, three pole, 415 Volts, adjustable thermal and fixed magnetic setting, 400 Amps with breaking capacity 36 KA, having indicating lamp, Ics=100% Icu and as per IEC 60947-2, complete all as specified and as directed by Engineer-In-Charge. Make: L&T/ Legrand/ ABB/ Merlin Gerin/ Siemens/ Havells/HPL
S&F in repair/Replacement Fuel injector /Fuel Nozzle suitable for DG set upto 500 KVA capacity Make Sudhir CS500D5P or As availalbe at site complete all as specified and directed by Engr-in-Charge.
Supply & filling of lubrication oil SAE-40 ( 15 W- 40 grade) complete all as specified and as directed by Engr-in-Charge. Note: (should be packing of 20 Ltrs bucket) Make: Mobile, Castrol, Volvoline.
Supply and filling of Antifreeze coolant of range 130⁰C to -30⁰C suitable for radiators of 20 KVA to 250 KVA capacity DG Set complete all as specified and as directed by Engr-in-Charge. Note: Should be in packing of 20Ltrs bucket. Make: Gainwell, Kohler, Castrol
S&F Exhaust gas muffler for 500 KVA for silent type catalitic converter complete all as specified and directed by Engr-in-Charge.
Repair/Attending break down of DG set to make completely functional in all respect to with out repalcing spare parts complete all as specified and directed by Engr-in-Charge. Note:- The Item include any type of breakdown and sundry item cost deemed to be include in the quated rate.
Shifting of DG set of 500 KVA from one location to other location in AF Station Thoise /site by means of Lifting machine including the taking down the eletrical connections and connections after shifting the DG sets will be provided by the contractor complete all as specified and directed by Engr-in-Charge.
Supply Jute cotton waste (as per sample) and cleaning & day to day maintainance of silencer & DG set installed at different location at this station complete all as specified and directed by Engr-in-Charge.
Taking down,repair and refixing to DGs soundproof doors broken hinges and handles of any make and size/Capacity including fixing with suitable size of broken door hinges with nuts,bolts or welding as per site requirements complete all as specified and directed by Engr-in-Charge.
M&L in repair for complete wiring harness of required size with sleeves thimbles, lugs indicator lamp, push button and starting switch etc for DG set of any capacity complete all as specified and directed by Engr-in-Charge.
S&F in replacement of sheet metal enclosure type change over switch on load front handle four pole 415 volts 50 Hz 630 Amps including mounting arrangement of metallic frame work of appropriate section and size on wallsor panels complete all as specified and directed by Engr-in-Charge. Make:- Havells/L&T/C&S
Supply and Fixing Battery 12 Volt 180 AH with Connecting Copper Lead & Clamp with color code complete all as specified and directed by Engr-in-Charge.
M&L for dismantling, opening of diesel engine cylinder block and Head , removal of unservieable worn out spare parts, cleaning of all components, reboring of cylinder on lathe machine, after reboring honning and all machine work process will be carrred out,replacement of all spare parts and gaskets as per manufacturer spare part kit, re-assembling of complete engine setting, timing setting for the capacity of 500 KVA DG set complete all as specified and directed by Engr-in-Charge. Note:- Sundry Item Deemed to be included in quoted rate.
S&F in repair/Replacement of Sump Heater/ Cold Starting Kit for DG set of Cap 500/400 KVA of Make Sudhir or as available at site complete all as specified and directed by Engr-in-Charge.
S&F in repair/ replacement of any type of sensor/relay viz-o-viz triping relay cooling sensor, lubrication sensor or any type required for 500 KVA DG of Sudhir make as per sample complete all as specified and directed by Engr-in-Charge.
Repair of of 500 KVA Sudhir CS500D5P or As availalbe at site installed at AF STN THOISE including dismantling and re-assembling of engine after replacement, repair of UNSV/defective parts with new parts as given below and supply and fix job work for complete DG sets parts here-in and Full load testing of DG set after complete overhauling work as per manufacturer recommendation after reassembling all parts complete all as specified and as directed to the full satisfaction of the Engr-in-Charge. Note:- (i) All new spare parts and job work shall be measured and paid for separately under respective items . Sundry items Such as nut,bolt washer,copper washer etc shall be deemed included in the rates quoted by the contractor. (ii) Repair and Transportation charge for the parts carrying out repair and after repair carrying back to Power House at AF STN THOISE including complete overhaul labour charges shall deemed to be included in the rates quoted by the contractor.
Supply of following spare part in replacement and fix new parts in DG sets Sudhir CS500D5P or As availalbe at site against BOQ Srl item No 31.00 here-in-before for replacement of U/S spare part for satisfactory functioning of engine (cost of fixing shall be paid against BOQ Srl Item No. 32.01 to 32.35 specified here in after) all as specified and directed by Engr-in-charge.
Engine Piston/cylinder Liner complete with Accessories for Sudhir CS500D5P or As available at site
Engine Piston complete with Accessories for Sudhir CS500D5P or As available at site
Engine Piston ring set complete with Accessories forSudhir CS500D5P or As available at site
Cylinder Head for One Cylinder of 500 KVA DG
Fuel Actuater with governor as per 500 kva DG Set Sample
Fuel pipe sets complete with connected accessries
All joint gasket set for complete DG sets as per requirements
All Head gasket set for complete DG sets as per requirements
Engine inlet valve set complete
Engine exhast valve seat set complete
Engine valve guide set complete
All coolant hose pipe set for complete DG sets as per sample
Exhaust Bellow
Oil Pump complete sets
Crank Shaft for 500 KVA as per site
Engine mounting AVM
Oil seal set complete
Steam seal sets
Magnet Pickup sets
Head water plug complete set for head block for Sudhir CS500D5P or As available at site
Thermostat Valve complete set
Engine Push Rod Set suitable for Sudhir CS500D5P or As available at site
connecting rod bush set
Tapered guide complete set
Cooling Nozzle
Oil cooler set for 500 KVA DG
connecting rod complete set for 500 KVA DG Engine as per sample
Exhaust Manifolds complete set for 6 cylinder 500 KVA DG engine as per sample
Complete radiator Assembly with intercooler with all connected Items suitable for coupling with500 KVA DG set engine complete all as specified and directed by Engr-in-Charge.
Current Sensor
coolant level sensor
Oil Pressure Sensor
Speed Sensor
Main bearing complete sets
CR bearings sets
M & L for cleaning of Diesel tank of 400/500 KVA DG sets by removing the sludge from the diesel tanks complete to the entire satisfaction of Engr in Charge.
M& L for fabrication of Day oil tank diesel storage tank complete made up of 5 mm thick MS sheet of capacity 1000 Ltrs at a height of 7 Ft from ground level with necessary level indicator of Diesel complete all as specified and directed by Engr-in-Charge. Note: the quoted rate includes the cost of necessary civil work, staging of Tank and the cost of MS tank duly supported by MS frame.
Note: The work under subject BOQ (item No. 1.00 to 34.00 ) is meant for maint and repair of DG Set in AF Stn Thoise under GE(AF) Thoise. The work shall be executed on ground on required basis but being remote station and extreme wheather condition contractor must stand by all the material and Engineer to rectify the breakdown of DG Set .Contractor shall deploy sufficient resources to keep smooth working of DG Set in the AF station. In addition any breakdown shall be communicated to contractor or his representative by concerned Engineer-in-charge/JE E/M through phone call, text message, complaint slip and or in writing through site order book or through other means. Non complying of attending breakdown by contractor within 24 hours after notify the complaint, recovery @ Rs 2000/- per day shall be recovered from contractor's payment for each breakdown so notified.
M/S NINDI BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .