Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.3 L+₹38,404.15 (0.89%)Rejected-Finance 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹44.4 L+₹1.5 L (3.39%)Rejected-Finance JAISALMER | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹46.3 L+₹3.4 L (7.91%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹47.5 L+₹4.6 L (10.7%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹50.0 L
EMD Value
₹99,900
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
REPAIR TO CERTAIN B/R WORKS IN TECH AREA IN ZONE-1 AND COMPHRENSIVE MAINT TO CERTAIN BLDGS IN OTM ACCN AT MIL STN JAISALMER
2022_MES_570896_1
8246/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹99,900
Yes
11 Mar 2023
23 Dec 2022
23 Jan 2023
23 Dec 2022
21 Jan 2023
6 Jan 2023
Amount
M & L for taking down of Shutters of any description exc 2.00 sqm each and refixing in same opening after doing of necessary repair work such as greasing in hinges, wheels of shutters with other necessary repairs such as repairs/replacement of handles, locking system, hinges, bottom wheels etc whatever accessories are required for smooth functioning of gates complete all as specified and directed by Engineer-in-charge. Note : - The Rate quoted by the tenderer shall deemed to inclusive of greasing to hinges of shutters whatever required to make Steel shutters fully functional (Opening and closing properly) upto the satisfaction of Engineer-in-charge.
Taking down chowkats or frames (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including making good the disturbed surface in PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) or CM 1:3 and to match with existing specifications complete all as specified and directed by Engineer-in-charge.
Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) or CM 1:3 and to match with existing specifications complete all as specified and directed by Engineer-in-charge.
Taking down of shutters of any description of area exc 1.00 sqm but n. exc 2.00 Sqm each complete all as specified and directed by Engineer-in-charge.
Taking down of shutters of any description of area exc 2.00 sqm each complete all as specified and directed by Engineer-in-charge.
Resecuring without taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.
Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified and directed by Engineer-in-charge.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 and n exc 2 sqm each complete all as specified and directed by Engineer-in-charge.
S&F running welding in repair thickness of metal to be welded n.exc 6mm complete all as specified & directed by Engineer-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-charge.
S&F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-charge.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed by Engineer-in-charge.
M&L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge.
S & F Anodised Aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, 03 hinges, mortice lock 6 levers, anodised aluminum snap beading screws etc, complete all as specified and directed by Engineer-in-charge.
S & F in repair Brass type 4 lever Mortice lock, vertical type, size 100 mm, complete all as specified and directed by Engineer-in-charge.
S&F in repair 4 lever mild steel mortice lock, vertical type, size 100 mm complete all as specified and directed by Engineer-in-charge.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge.
S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-charge.
S&F Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed by Engineer-in-charge.
S & F 4.8mm thk Sheet glass, ordinary quality and glazing with beadings/glazing clips in square n exc 0.5sqm in each pane complete all as specified and directed by Engineer-in-charge.
S & F in repair, Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed by Engineer-in-charge.
S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engineer-in-charge.
S & F 35mm thk Factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge.
S&F 35 mm thick Glazed and skeleton shutters second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.
S&F 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required complete all as specified and directed by Engineer-in-charge.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-charge.
S&F in repair aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed by Engineer-in-charge.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-charge.
S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-charge.
S&F in repair, Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-charge.
S&F aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-charge.
S&F 12 mm Prelaminated Particle board, exterior grade, prelaminated both side with decorative choice laminations fixed with screws to timber frame work and alumunium frame complete all as specified and directed by Engineer-in-charge.
S&F 18/19mm thick pre-laminated particle board, exterior grade, with decorative choice lamination & other side balancing white lamination with and including 6mm thick teak with wood beading fixed in kitchen CB or pelmet including dismantling existing board of any description with scews complete all as specified and directed by Engineer-in-charge.
M&L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.
M & L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.
M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat etc complete all as specified and directed by Engineer-in-charge.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.
M&L for chequered ceramic tiles exterior grade 300 x 300 x 7 to 8mm including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engineer-in-charge.
M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 including dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.
M& L for Providing precast cement concrete Type C1 (1:3:6) by using 20mm graded aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6, complete with joints to match complete all as specified and directed by Engineer-in-charge.
M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A with dismantling of existing structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Engineer-in-charge.
M&L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete including demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zine coating GI based corrugated steel sheeting 0.50mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws including dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified & directed by Engr-in-charge. Note : The rate quoted by the tenderer shall deemed to inclusive of the followings :- (i) The fixing of Galvalume roof sheet as in sun-shades & in walls at certain places to be fixed by making of grooves cutting 75mm minimum and making good to match with existing specifications (ii) The pattern and design of sunshades shall be complete all as specified and directed by Engineer-in-charge.
S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms /20 mm- 210 gms/ 25mm-455gms/ 40mm - 690 gms) , all as specified in SSR Part-I, including dismantling of existing tank complete all as specified and directed by Engineer-in-charge.
S&F 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms /20 mm- 210 gms/ 25mm-455gms/ 40mm - 690 gms) , all as specified in SSR Part-I, including dismantling of existing tank complete all as specified and directed by Engineer-in-charge.
S & F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm- 210 gms/ 25mm-455gms/40mm - 690 gms), complete all as specified and directed by Engineer-in-charge.
S&F in repair of harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engineer-in-charge.
S & F anodised aluminium alloy Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.(Curtain rods ) complete all as specified and directed by Engineer-in-charge.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
M&L for Non asbestos cement building board 6 mm thick in ceiling fixed with screw with GI frame work snap grid frame work of 605x605mm including dismantling of old false ceiling, complete all as specified & directed by Engineer-in-charge.
S & F in repair, 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed by Engineer-in-charge.
S & F in repairs, Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down of existing wall panelling and similar work complete all as specified & directed by Engineer-in-charge.
S&F, rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed by Engineer-in-charge.
S&F 75mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed by Engineer-in-charge.
S&F in repair 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed by Engineer-in-charge.
S&F 125 mm size aluminium handle, cast type, anodiesed complete all as specified & directed by Engineer-in-charge.
S&F in repair aluminum handles cast type, anodised, 150mm size complete all as specified & directed by Engineer-in-charge.
S&F, 300mm long mild steel sliding door bolts plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed by Engineer-in-charge.
S&F, glavanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified & directed by Engineer-in-charge.
S&F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glass of any thickness size,quality or description from metal frames and supply and fixed 3mm thick glass with glazing clips and oil putty complete all as specified & directed by Engineer-in-charge.
M&L for 50 mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified & directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar complete all as specified & directed by Engineer-in-charge.
Demolition of cement concrete (reinforced) in roof, roof projection, chajja and similer works in any position complete all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick plain cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in flooring complete all as specified & directed by Engineer-in-charge.
M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified & directed by Engineer-in-charge.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.
M&L sand stone slabs 5cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified & directed by Engineer-in-charge.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.
M & L rendering 15mm thick on surface of stone masonry or other than fair face of brickwork in CM (1:6), finished the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.
M&L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work or one side of lathing in cement mortar (1:4), finished the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for rendering 5 mm thick on fair faces faces of brick work or concrete surfaces of ceilings in cement plaster 1:3 & finished the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.
M & L preparation of new plastered surfaces of walls and applying two coat of oil bound distember over a coat of primer complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified & directed by Engineer-in-charge.
M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified & directed by Engineer-in-charge.
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in subbase of floors complete all as specified & directed by Engineer-in-charge.
M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, joint free non skid tiles, laid over and including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles not exceeding 0.36 Sqm (including 600mmx600mm size), in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed by Engineer-in-charge.
M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for 2nd class hard wood fillets square, rectangular as in lippings fixed with nails of area exc 3Sqcm but n.exc 6sqcm complete all as specified & directed by Engineer-in-charge.
S & F 40mm width of flaps (when open) continuous (piano) hinges, mild steel bright finish or electroganised fixed to wooden or angle iron frame complete all as specified & directed by Engineer-in-charge.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified & directed by Engineer-in-charge.
S&F in repair 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate with screws complete all as specified & directed by Engineer-in-charge.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified & directed by Engineer-in-charge.
S&F in repairs Floor door stopper of aluminium alloy body 140mm long complete all as specified & directed by Engineer-in-charge.
M and L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and providing 10 mm thick cement plaster in CM (1:3) using water proofing compound @ 3 % by weight of cement and applying one coat of bituminous primer @ 200 gms per Sqm and then laying 3mm thick APP modified bituminous membrane (mineral finish) weighing not less than 3.5 Kg/Sqm reinforced with non woven polyster mat as reinforced weighing not less than 160 gms/Sqm laid by torch application method overlap while torching shall be 75 mm on length and 100 mm width side ,all angles and bituminous should sealed with extra care to ensure full bondage all joints and changes should covered with CM 1:3 with water proofing chemical as per manufacturer's instructions and cured well before laying membrane complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 15mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 20mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.
S&F in repair 15mm dia bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair 15mm dia pillar taps cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair 15mm dia stop valves fancy type cast copper alloy chromium plated screwed down high pressure with crown or capstan head screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair brass chromium plated shower rose with swivel joints 125mm dia with 18mm dia chromium plated pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as specified & directed by Engineer-in-charge.
S&F in repair 10 ltrs capacity PVC low level flushing cistern with inlet, ball valve, float, handle including fitting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the existing fittings complete all as specified & directed by Engineer-in-charge.
S&F in repair vitreous china wash down water closet pedestal pattern including connecting to flush tank complete all as specified & directed by Engineer-in-charge.
S & F in repair for pressure jet for western type water closet with PVC connection 600 to 900 mm long including brass head screw and suitable washer complete all as specified & directed by Engineer-in-charge.
S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified & directed by Engineer-in-charge.
S&F in repair plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete all as specified & directed by Engineer-in-charge.
S&F in repair vitreous china wash basin, white, flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as specified & directed by Engineer-in-charge.
Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
MARUDHARA CONSTRUCTION COMPANY
M/s Shri Inder Construction Company
GEMRARAMCONTRACTOR
M/S MAYA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .