MAINT/REPAIRS TO FENCING, COMPOUND WALL, FOOT PATH, HARD STANDING, REPAIR TO DRAIN ETC AT PARUNDU AND RAMNAD UNDER GE TIRUNELVELI

Amount

SCHEDULE 'A' (PART -I B/R Portion)

Material and labour in repairs razor blade galvanised barbed Concertina coil 900mm dia meter made out of 2.59mm thick galvanised wire having weight of each coil @ 15.2 Kg+/- 5% stretched to a length of 10 to 12 m to achieve 800 mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fasteners such as J clips, C clips, U clips etc fixed in position complete all as specified and as directed by Engineer-in-charge.

Material and labour in repairs Reinforced punched barb tape, with short barbed profile made out of GI reinforced core steel wire 2.5 mm dia and 0.5 mm cold clenched strip barbs around the core wire including 12 gauge spring steel GI wire having minimum tensile strength of 1650 kg/sqmm including fixing to concertina coil/steel posts/frames complete all as specified and as directed.

Material and labour in repairs razor blade galvanised barbed Concertina coil of 1050 mm diameter made out of 2.59 mm thick galvanised wire having weight of each coil @ 15.2 kg ± 5% of coil, stretched to a length of 10 to 12 m to achieve 950 mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fasteners such as J clips, C clips, U clips all as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick or stone walls etc., including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

Material and labour for 10mm thick rendering in cement mortar 1:6, on fair faces of brick/concrete surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered surface and applying two coat of cement base paint over a coat of primer on plastered surfaces complete all as specified and directed.

Material and labour for preparation of old plastered surface and applying one coat of cement base paint on plastered surfaces complete all as specified and directed.

Material and labour for preparing old steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified

Dismatling fencing wiremesh, any type complete all as specified and as directed.

S&F 4mm dia GI steel wire PVC coated 75mm X 75mm mesh as in chain link fencing including straining and fixing to posts and to straining bolts including securing with and provision of galvanised iron,PVC coated,tying with wire etc complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete

Material and labour for brick work with sub class 'B' old size built in CM 1:4, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate cast in situ as in copings and the like including weathering, slightly rounded or chamfered or chamfered angles as directed including use of form work as necessary all as specified and as directed.

Material and labour for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate, in surface channel and drains including necessary form work complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc 15 cm thick below or above GL complete all as specified and as directed.

Material and labour for 100 mm thick PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in floor, laid in panel, surface finished fair and even without using extra cement including necessary formwork complete all as specified and as directed.

Material and labour Forming Contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

Material and labour 100 mm thick plain cement concrete Type D2 1:4:8 (using 40 mm grtaded stone aggregate) as in sub floors all as spcifed and as directed.

Material and labour chequred Cement concrete tiles 20cm x 20xm x25mm thick, with grey cement and pigment machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished inluding Screed bed or bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed.

MURUKAN BUILDERS

JR ENTERPRISES

VVM CONSTRUCTIONS

Vinayaga constructions

sri manikandan enterprises

HARI HARA INFRASTRUCTURES