Maintenance of Sluice and wier in Nanjankulam at Nanjankulam Panchayat

Amount

Earthwork excavation for foundation in all soils and depositing on bank inclusive of shoring, strutting and bailing out water wherever necessary, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers wi

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Centering charges for all concrete works including all cost and conveyance of all materials and all labour charges etc., complete.

Cement concrete 1:3:6 mix using 20mm ISS HBG metal including cost and conveyance of all materials and all labour charges etc., complete.

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials and all labour charges etc., complete.

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Pointing the RR Masonry with cement mortar 1:3 mix including cost and conveyance of all materials to site and all labour charges etc complete

Fabrication, Supply and erection of Screw Gearing Steel Shutter of size 0.50x0.50, made out of 8mm thick Mild Steel plates and 65 x 65 x 6mm Mild Steel Channels for outer frame with each 1 No of vertical and horizontal stiffeners at equal spacing made out of same section and 8mm Mild Steel plate for Gusset plate 2 Nos. of size 0.30 x 0.23m with required bolts and nuts and shutter Groove Angle made out of 100 x 100 x 10mm Mild Steel angle with required height including welding of Holdfast of size 40x40x6mm Mild Steel angle 3 Nos and Screw Rod 50mm dia Mild Steel Round Rod duly machined and fully threaded to suit the Capstan Head Assembly with required bolt and nut and Top beam made out of 150x75mm (ISMB 150) duly drilled to suit the Head Set Assembly with required bed bolt made out of 25mm Mild Steel Round Rod duly threaded with suitable anchorage arrangements to a height of 0.9m with necessary Fish Plate made out of 12mm Mild Steel plate of size 0.23 x 0.30m, 2 Nos and the Cast Iron Head Set Assembly medium duty with hexagonal nut (approximate 50Kg) duly machined with nut, threading to suit the Screw rod with including cost of ball bearings for smooth operation cost of grease, one coat of Anticorrosive black paint over the one coat Red Oxide primer etc., The cost shall include required handle for shutter operation and conveying loading and unloading charges including petty civil work and trail operation etc., complete.

shuttering 0,90*1,50m

shuttering 0,90*0.80m

MR.A.MOHANRAJ, CONTRACTOR (BID ID -1316212)