Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹38.3 LAccepted-AOC 15 JOGENDRA NATH GHOSAL ROAD P S BELGARIA KOLKATA 700 057 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700057 | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹39.2 L+₹21,296.80 (0.55%)Rejected-Finance ADARSHAPARA EAST BIDYADHARPUR SHYAMNAGAR DIST 24 PARGANAS N PIN 743 127 | SHYAMNAGAR | 24 PARGANAS N | WEST BENGAL | 743127 | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹39.3 L+₹29,811.96 (0.77%)Rejected-Finance 27 WESTERN STREET ROOM NO 307 KOLKATA 700012 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700012 | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | 4₹40.0 L+₹1.0 L (2.63%)Rejected-Finance 35 P C MUKHERJEE STREET PO KONNAGAR DIST HOOGHLY PIN 712235 | KONNAGAR | HOOGHLY | WEST BENGAL | 712235 | 4 | Rejected-Finance Not L1 Bidder | |
| 5 | 5₹40.1 L+₹1.1 L (2.84%)Rejected-Finance | 5 | Rejected-Finance Not L1 Bidder |
Tender Value
₹36.1 L
EMD Value
₹72,180
Closing Date
14 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
SPL REPAIR TO BLDG NO PB 49 AT 17 CORPS OMC AND CERTAIN MINOR WORKS UNDER GE NORTH KOLKATA
2022_MES_545680_2
8188/22-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
DAKSHINESWAR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹72,180
Yes
16 Sept 2022
5 Sept 2022
15 Sept 2022
6 Sept 2022
14 Sept 2022
7 Sept 2022
Amount
Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed
Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified as directed.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
Material and labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirting/dados etc over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.
Material & labour for providing 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floor, complete all as specified and as directed
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing liquid admixture for concrete and mortar.
Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for applying 3mm thick wall care putty and appling two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.
Dismantling wrought iron or mild steel work for any description not otherwise provided for complete all as specified and directed.
Dismantling timber scantling 40sqcm and over in section in any position.
Dismantling of steel sheeting ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .
Supply and fix steel work erection in position in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.
Supply and fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified nad directed.
Supply and fix 2 mm thick Fibre Glass reinforced Translucent corrugated or semi corrugated/plain sheeting conforming to IS: 12866-1989 ( Colour ) with two corrugation side lap fixed with 'L'type or 'J' type or cranked hook bolts and washers in roof , walls etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .complete all as specified and as directed .
Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc.
Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction
Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified & directed.
Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and as directed.
All as per item No. 23 above but 20mm dia.
Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.
All as per item No. 25 above but 20mm dia.
Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed
Supply and fix in repair Vitreous china wash down water closet pan ( pedestal pattern ) , white with necessary seat cover including connection to drain ( or out going pipe ) and to flushing pipe , antisyphonage pipe complete all as specified .
Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed.
Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix in repair stop cock/ angular stop cock of 15mm bore fancy type, chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for brass ferrule complete all as specified and directed.
Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed.
S&F in repair CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed in repairs.
Supply and fix Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
Supply and fix in repairs vitreous China wash basin white flat back, size 550 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore CP pillar tap,chain and plug and porcelain stopper etc. complete all as specified and as directed.
Supply and fix in repair Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed.
Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip and including taking down existing rain water pipes complete all as specified and as directed.
Supply and fix UPVC bend/shoe/Tee 110mm dia all as specified and as directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.
All as per item No. 41 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.
Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
Material and labour for treating ends of posts, backs of chowkats, etc., with tar or coal tar black paint area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed.
Supply and fix 30mm thick flush shutters solid core construction with particle board core and plywood face panels, one face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed.
Supply and fix 35mm thick 2nd class hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.
Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.
Supply and fix sliding powder coated anodised aluminium window shutters for gauged/ gauged, aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)
Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangular exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed.
Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..
Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
Supply and fix in repairs pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed.
S&F 30mm width stainless steel Continous (piano) hinges, bright finish and all as specified and directed.
Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed.
Supply and fix 4mm thick frosted glass ordinary quality, in square/rectangular not exceeding 0.5 Sqm in each pane fixed to wooden frame complete all as specified and as directed.
Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fix 3mm thick sheet glass, ordinary quality and glazing in square n exc 0.5 sq. m in each pane fixed to steel frame(fixed with oil putty and clips)/wooden frame(fixed with Iind cl hard wood beads) including hacking out old broken glass from metal frmae/wooden frame complete all as specified and as directed
Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.
Material and labour for applying one coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth incl preparation of old steel surfaces complete all as specified and directed.
Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.
Supply and fix in repair 25mm dia powder coated aluminium curtain rod fancy type( length from 0.90m to 1.8m)with fancy type end side brackets and fancy type hanging brackets complete all as specified and as directed.
Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams(reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Material and labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Chajja and like complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed
Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
M&L 20mm thick Granite(of any type)work(table rubbed and polished) in steps, jambs,pillars,window -cills, cooking plateforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite ,complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed
Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L Hardcore of gauge exc.63mm but not exc. 100mm ,deposited,spread and levelled in layers n.exc. 15cm thick,watered/rammed to a true surface complete all as specified and directed.
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Material and labour for 75mm thick PCC type D2 (1:4:8) using 40mm garded stone aggragate as in, sub base of floors etc complete all as specified and as directed.
M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floorscomplete all as specified and directed.
Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.
Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
M&L Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
Surface excavation n.exc 30cm deep and avg 15 cm deep and getting out in soft/loose soil
Excavating over areas, n exc 1.5m deep and getting out in soft/loose soil complete all as specified & directed.
Excavating trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation of manhole etc and getting out as in Soft/loose soil complete all as specified & directed.
Returning filling insoil, incl spreading, levelling, watering and well ramming in layers n.exc 25cm
Removing excavatged material (soil) to a dist n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point
M & L for PCC 1:4:8 (40mm graded stone aggregate) type D2 as in fdn of footings, filling and mass concrete
M&L reinforced cement concrete (nominal mix)type A1 1:1.5:3 (20mm graded stone aggregate) in foundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete , all as specified and directed..
M&L Reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings ; including attached pilaster and buttresses ,all as specified and directed.
M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.
M&L Formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as specified and directed.
Supply and fix framed work such as grills etc with ends of bars shouldered barred iron doors and work framed and hung as gates/ doors including pintle hinges, stops, hand-made sliding bolts etc
Cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) 80mm thick finished even and smooth w/o using extra cement
Material and labour for providing 100 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and as directed
Excavation in post holes ( or similar holes) each n exc 0.5cum, getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil.
Material and labour for providing cement concrete in foundations 1:2:4 type B2 (nominal mix using 40 mm graded stone aggregate) filling and mass concrete for securing/ fixing of fencing post/ strut in under water including necessary formwork and dewatering as required at site complete all as specified and directed.
Material and Labour PCC 1:3:6 Type C1(using 20 mm graded stone aggregate) as in bed block for fixing holdfast , coping , kerbs, rounded or chamfered on edge including necessary form work complete all as specified and as directed .
Supply and fix rolled mild steel Fe-410 (Grade E-250A) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 Nos gaps/cuts/holes in each post for providing/laying barbed wire and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed. (Note :- Supply and fix barbed wire shall be measured and paid separately)
Supply and Fix mild steel 10 mm diameter of shank screw bolts (machine made) with hezagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm and n.exc 10 cm long complete all as specified and directed. (Bolt to be embeded into RCC fencing post while casting)
Supply only MS 10 mm dia round bars (Fe-410-W (Gde E-250 quality-A or Fe 290 (Gde - E-165)) as line wire for holding chain link mesh including applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and directed.
Supply and fixing Galvanized, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type or standard rails. Straining bolts. Including, securing or tying at crossings with and provn of galvanized mild steel wire staples or steel pins etc complte all as specified and directed (Note : Each line of wire to be measured seperately)
Supply only chain link fencing 50 mm x 50 mm mesh 4 mm thick, made out of mild steel galvanised hot drip wire including provision of binding wire completed all as specified and directed.
Fixing only chainlink fencing including line wires , any mesh , size and type to any type of standards , rails , straining bolts etc including provision of binding wire complete all as and as directed .
Supply and fix mild steel wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire,etc.; flat iron fillets( for securing wire mesh etc.) including all necessary dilling , bolting or riveting etc; and similar work conforming to Fe-290 Gde E-165.
Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying 1.50mm thik birla wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed for One light point controlled by one switch complete all as specified and directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting for wiring shall bemeasured and paid separately. One light point controlled by one one way 5 Amp switch
All as per item No. 114 above but, One fan point controlled by one , one way 5 Amp switch
All as per item No. 114 above but, One 5 pin socket outlet 05 Amp on independent board .
All as per item No. 114 above but, One 5 pin socket outlet 05 Amp on same board .
All as per item No. 114 above but, One bell/buzzer point controlled by one push button same board with other switch or independent
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting for wiring shall be measured and paid separately.
M & L concealed sub main wiring complete with 2 runs of 6 sq mm,single core,PVC insulated,unsheathed FRLS cable,1100 volts grade,multi standard with copper conductor drawn through and including PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated 6 sq mm copper conductor for earth continuity conductor including taking down old US wiring all as specified and directed Note :- Two runs of cable one run of conduit and one run of copper wire shall be measured as one unit length.
Supply & fix switch piano flush button, single pole, one way 5 Amp
Supply & fix socket outlet, 2 in 1,5 pin 5 Amp flush type
Supply & fix switch socket combination 2 in 1, 2 and 3 pin 5 Amp flush type
Supply & fix switch socket combination, 5 in 1, multipurpose 5/15 Amps flush type universal .
Supply & fixing ceiling fan regulator,electronic type,step type 5 speed A/C, 230 volts on the existing laminated sheet complete all as specified and directed.
Supply & fix ceiling rose, 3 terminals, surface bakelite / PVC / Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and directed.
Supply & fixing PVC poly carbonate round blocks 10 cm dia complete all as specified and directed.
S & F Bell push, flush type, 5 amp single pole, complete all as specified and directed.
Supply & fixing calling bell SP 230 volts and taking down U/S call bell.Musical type Make Anchor/Havells.
Supplying & fixing LED tube light fitting, 1 x 18 watt bipin holders, connector block etc. complete with all accessories internally pre-wired with and including 18 watt tube rod retrofit and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified & directed Make: Havells/crompton/phillips/bajaj or equivalent
S&F lamp Holder insulated body with back plate angle/straight type suitable for batten complete all as specified and directed.
S&F LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and directed.Make: Havells/crompton/phillips/bajaj or equivalent
supply and fixing led luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Havells/crompton/phillips/bajaj or equivalent
Supply and fixing round shape 15 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make :- Havells/Crompton/Philips/Bajaj or equivalent
S&F single pole and neutral DB wall mounting type,240 Volts,12 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch all as specified and directed. MAKE : L&T/HAVELLS/ABB/LEGRAND/INDOASAIN OR EQUIVALENT
S & F MCB SPN 6 Amps to 32 Amps 240 volts. Make: MAKE L&T/HAVELLS/ABB/LEGRAND/INDOASAIN OR EQUIVALENT
S & F MCB SP 6 to 32 Amps 240 volts. MAKE :- L&T/HAVELLS/ABB/LEGRAND/INDOASAIN OR EQUIVALENT
S & F LED building security light fitting 25W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having seperate driver compartment with IP65 protection and impact resistance of IK07 including mounting bracket of suitable size complete. Make: Havells/crompton/phillips/bajaj or equivalent.
Supply & Fix in replacement modular type power unit 25 amps complete with 4 module plate, starter plug and socket . Make -Crabtree (Sapphire) / Havells / C&S/ Bajaj / Havells
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep, 35 watt. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make :- BAJAJ/CROMPTON/HAVELLS/USHA or equivalent
Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc. Make :- BAJAJ/HAVELLS/V GUARD OR Equivalent
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and connection complete. Make:- BAJAJ/CROMPTON/HAVELLS/USHA or equivalent
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.
Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 10 cm thick after laying of cable in trenches complete all as specified.
Material and labour for brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable all as specified and directed.
Taking down old unserviceable any size of LT cable and Supply and laying, jointing, testing and commisioning LT XLPE/PVC cables, PVC insulated, PVC Sheathed armoured LT 1100 volt grades 35 Sqmm 3.5 core heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc.
Supply and laying 40 mm bore GI tubing light grade laid in trenches for cable protection.
Supply and fix in replacement vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100 A)as incomer including MCCB+12 modules incoming and outgoing make good of damaged surface/wall including re-connection with existing earth wire to DB all as specified and as directed.Note:- MCCB shall be measured and paid seperatly. Make: Havells/ l&t/ABB/INDOASAIN or equivalent
Supply and fix in replacement MCCB triple pole & neutral 40-100 amps,,16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed . Make :- Havells / L&T /ABB/INDOASAIN.
Cutting existing steel tubing for alterations or additions (Each cut measured) of 40 mm bore all as specified and directed.
Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of 20 mm bore all as specified and directed.
S&F GI water tubing, medium grade, 25 mm dia, incl fittings/accessories like sockets, bend, elbow, union etc laying in trenches all as specified and directed.
M&L for gunmetal globe/gate valve with iron wheel head, screwed both ends of sizes 25 mm ISI marked all as specified and directed.
M&L for gunmetal globe/gate valve with iron wheel head, screwed both ends of sizes 40 mm ISI marked all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size.Make havells, cromptom, bajaj or equivalent
Supply and fixing ceiling fans complete with blades, down rods, electronicregulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE, 35 watt with brushless direct current motor (BLDC). Make crompton, Havells, Bajaj or equivalent
SHRI MILAN CHANDRA DAS
ELECTRO COMMERCIAL CO
M/S MAHENDRALALL DUTTA
M/S KARTICK DUTTA
NANDYENTERPRISES
RADHA ENTERPRISE
The Planters Engineering Corporation
SENCO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .