Construction of Trauma Centre at IGMC Shimla SH Providing VRV HVAC system therein

Amount

Supply, Installation, testing & commissioning of ceiling mounted ductable air discharge indoor units of following capacity suitable to operate from 230+10% volt, 50 HZ, 1 phase power supply, with conpact cooling coil, electronic expansion valve and multispeed fan motor, with min canvas Connection, corded remote, fittings & required cable to connect indoor unit to socket. Refrigerant Pipe size and gas quantity should suit to the copper pipe length at actual.The capacity guarantee should be ensured by the vendor.he blower shall be dynamicaly balanced and designed for silent operation, built in drain pump, the drain pan shall be fabricated out of heavy sheet steel insulated with 6mm' expanded polythylene sheet. Make:- Daiken, Bluestar,Toshiba etc.

Ducted Unit 4.13 TR

Ducted Unit 4.63 TR

Ducted Unit 6.61 TR

Ducted Unit 8.27 TR

Supply, Installation, testing & commissioning of Wall Mounted Type Unit of following Nominal capacity suitable to operate from 230+10% volt, 50 HZ, 1 phase power supply with remote control complete with fittings, required cable connect indoor unit to socket etc. complete as required. Make:- Daiken, Bluestar, Toshiba etc.

Supply, installation, testing & commissioning of refrigerant for VRV IDU and ODU units complete as required. Make:- Daiken,Bluestar,Toshiba etc.

Installation, testing and commissioning of imported, ref nut joints/branch distributors, Y-joints fittings and header to all indoor units at all floors including alignments of joints complete as required. Make:- Daiken, Bluestar,Toshiba etc.

Installation, testing & commissioning of corded remote controller suitable for Indoor units (for all the ducted and cassette type units) and suitable to work on single phase 230 volt (+)(-) 10% 50 Hz AC supply. Make:- Daiken, Bluestar, Toshiba etc.

Providing, Installation, testing & commissioning of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 19/13 mm thick closed cell electrometric nitrile rubber tubular insulation between each set of indoor & outdoor units all exposed pipes as per specification. Make:- Daiken,Bluestar,Toshiba,Totaline etc.

41.3mm dia with 1 nitrile rubber insulation

34.9 mm dia with nitrile rubber insulation

28.6 mm dia with nitrile rubber insulation

22.2 mm dia with nitrile rubber insulation

19.1 mm dia with nitrile rubber insulation

15.9 mm dia with nitrile rubber insulation

12.7 mm dia with nitrile rubber insulation

9.5 mm dia with nitrile rubber insulation

6.4 mm dia with nitrile rubber insulation

Supply, installation, and commissioning of factory fabricated cable Tray for and sloted angle for laying and supporting copper pipe complete as required.

Supply, installation, balancing and commissioning of GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Make:- Tata, Sail, Jindal etc.

Thickness 24 G sheet

Supply and fixing of duct insulation with 10 mm thick nitrle rubber complete as required. Make:- Armaflex, aeroflex, Aflex etc.

Supplying & fixing of powder coated extruded aluminium supply air grills with damper complete as required. Make:-Uniair,Ventiair,Carriair etc.

Supplying & fixing of powder coated extruded aluminium return air grills dampers as per specifications. Make:- Uniair,Ventiair,Carriair etc.

Supplying & fixing of powder coated extruded aluminium diffusers with volume control as per specifications. Make:-Uniair,Ventiair,Carriair etc.

Providing & fixing of control wiring/signal wiring with copper conductor cable between indoor and outdoor units directly on surface of wall/ existing channel including making connection etc. as reqd.

2 core x 1.5 sq mm copper wire

Providing and fixing of following diameters rigid PVC heavy class drain piping for ductable/split units and cassette type units, complete with fittings, supports as per specifications. The pipes shall be insulated with 6mm thick closed cell nitrile rubber. Make:- Phenolex,Diplast,Sintex etc.

Supply, installation, testing and commissioning of Accoustic insulation with 12 mm thick insulation board covered with Rp Tissue & finally covered with 30gauge perforated al. sheet complete as required.Make:- PNIGA, Ecofly etc.

Comfort technologies