Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC PLOT NO 407 HIMSHIKHA PINJORE PANCHKULA HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹29.6 L+₹64,460 (2.23%)Rejected-AOC H NO 816 NEAR GANDHI CHOWK KALKA 133302 HARYANA | KALKA | PANCHKULA | HARYANA | 133302 | L2 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹29.2 L
EMD Value
₹58,420
Closing Date
29 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE JUTOGH
GE JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
SPL REPAIR TO BLDG NO. P-82 (SINGLE OTHER RANK ACCN) FOR 102 INF BN (TA) PUNJAB AT MIL STN KALKA UNDER GE JUTOGH
2022_MES_549545_1
GE/JUT-39 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KALKA
CLASS D CATEGORY a (i)
7 documents required · 7 mandatory
₹500
GE JUTOGH
₹58,420
Yes
18 Oct 2022
2 Sept 2022
1 Oct 2022
2 Sept 2022
29 Sept 2022
15 Sept 2022
Amount
Taking down of cement plaster incl raking out of joints hacking for key scrubbing down with water complete all as specified and directed.
Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..
M&L for brick work with sub class 'B' bricks, (Except bricks) straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..
M&L for brick work with sub class 'B' bricks,straight or curved on plan any radius, built in CM (1:4) in half brick thick wall complete all as specified and directed..
M & L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth complete all as specified and directed.
M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over and incl a coat of primer, complete all as specified and directed.
M & L for applying two coats of cement base paint incl preparation of surfaces complete all as specified and directed.
M&L for applying three coats of white wash on new surface of ceiling incl preparation of surfaces, complete all as specified and directed.
M&L for preparation of previously treated old surface of wall and applying two coats of dry distemper complete all as specified and directed.
M & L for complete removal of existing treatment from wall and applying two coats of cement base paint incl preparation of surfaces complete all as specified and directed.
M&L for applying two coats of white wash on old treated surface of ceiling incl preparation of surfaces, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises all as specified and directed .
M&L 18-20 mm thick machine cut prepolished kota stone slab, edge cut by machine as in skirting/dado fixed over and including 10mm thick rendering in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges complete all as specified and directed.
M & L for joint filling of existing Kota stone slab/terrazo tile flooring in coloured cement to match including rubbing and polishing etc complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick square/ rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.
M&L for Glazed ceramic colored tiles on vertical surface such as in skirting/dado of size 350x250x7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles.over Including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing of rubbish outside premices as directed by Eng-in-charge complete all as specified and directed.
M&L for PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in filling and mass concretes in sunken floor complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth with using extra cement, complete all as specified and directed.
Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.
Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.
Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from site complete all as specified and directed.
S & F pressed steel frames (made of 1.25 mm thick sheet) for door 125x60mm with one or more rebates incl necessary fixing lugs hinges lock strike plate etc including filling with PCC 1:3:6, Type C-0, complete all as specified and directed.
S & F pressed steel frames (made of 1.25 mm thick sheet) for door 105x60mm with one or more rebates incl necessary fixing lugs hinges lock strike plate etc including filling with PCC 1:3:6, Type C-0, complete all as specified and directed.
Dismantling of brick tiles or terracing tiles, single layer on roofs, incl cleaning of bricks/ tiles and removal of unserviceable from site, incl wire brushing and cleaning the roof surface with water, incl flashings and junction of parapets, etc., complete all as specified and directed.
S&F 2nd class H.W factory made panelled shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces the size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.
S&F 35mm thick (factory made) glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F PTMT butt hinge, 200mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.
S&F 125mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and directed.
S&F 200mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified.
S&F in repair 18/19mm thick prelaminated particle board, exterior grade, both side decorative choice lamination , fixed with screws to timber frame work complete all as specified and directed.
S&F 6mm thick teak wood lipping for fixing on edges of pre laminated particle board/block board complete all as specified and directed.
S&F Hasp and staple 100mm safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 300 mm, MS ordinary rat tail rod pattern spring incl roller& roller plate & welding if necessary complete all as specified.
S&F in repair 300 mm, MS ordinary rat tail rod pattern spring incl roller& roller plate & welding if necessary complete all as specified.
S&F 300mm long aluminium alloy anodised , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F steel windows of profile rectangular tube section with side hung shutters incl hinges with steel handles, MS stopper with glazing bars, complete all as specified and directed.
S&F steel windows of profile rectangular tube section with side hung shutters incl hinges with steel handles, MS stopper without glazing bars, complete all as specified and directed.
S&F steel window or ventilators, fixed type, with galzing bar complete all as specified and directed.
Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.
S& F stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.
S& F in repair stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.
M&L for framed work such as grills, gratings etc., with ends of bars shouldered or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work complete all as specified and directed.
M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over shop coat of red oxide primer complete all as specified and directed.
Demolition of (reinforced) cement concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
Use and waste of form work to soffit of chajjas, shelves troughs and similar items including edges for fair finished surface complete all as specified and directed.
M&L for RCC 1:1.5:3, type A-1, using 20mm graded crushed stone aggregate as in chajja/ shelves and the like complete all as specified and directed.
M&L for RCC 1:1.5:3, type A-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and the like complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for rough finish surface complete all as specified and directed.
M&L RCC 1:1.5:3, type A-1, using 20mm graded crushed stone aggregate as in beams, cantilevers, bressumers lintels over 1.5 m span etc.complete all as specified and directed.
Use and waste of form work to sides & soffits of floor or roof beam beam haunchins girders bressumers lintels cantilevers shelves including over hang supports etc. for rough finish surface complete all as specified and directed.
S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F MS TMT bar 6 to 8mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L MS TMT bars, 5mm dia and over upto and incl 10mm dia as in stirrups, spacers, binders etc cut to shape requred, incl cranking spirally for hooping for columns, hooking ends binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.
M & L for 5mm thick rendering in CM 1:3 on ceiling finishing the surface even and smooth complete all as specified and directed.
M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface mixed with liquid water proofing compound as per manufacturer's instruction finished even and fair complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ.
Supply only Integral water proofing compound complete all as specified and directed.
M&L for roof treatment, cleaning of old roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under:- (a) Preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) Applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required and dorected. (d) Applying aluminium paint @ 0.20Kg/Sqm.
Dismantling water tanks exc. 500 ltrs & n. exc. 1000 ltrs capacity and removing from site complete all as specified and directed
S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.
Refixing of rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed. Note: Tank obtained from dismentling shall be refixed.
S&F ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed 20mm bore complete all as specified and directed
S & F 20mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S & F 15mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.
Taking up or down 15mm bore steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.
Taking up or down 20mm bore steel water tubing and connections incl cleaning for refixing or removal from site o complete all as specified and directed.
S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.
Re-fixing old steel tubing 15 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.
S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.
Re-fixing old steel tubing 20 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.
S & F stop valve concealed of 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repair 15mm bore bib tap fancy type chromoim plated long body cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580x450 mm white with integral foot rest or back inlet and making good the floor with PCC 1:2:4 type B-1 complete all as specified and directed.
S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) incl PVC 'P' or 'S' trap complete all as specfied and directed.
S&F in repair PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S & F in repair brass chrominum plated shower rose 125mm size and 30cm long CP brass pipe with or without swivel joint incl fixing to steel pipe of size 15mm bore complete all as specified and directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, urinal pipe, spreader, grating and union for discharge pipe complete all as specified and directed..
S & F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including brackets complete all as specified and directed.
S&F in repair chromium plated brass, Tubler towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.
S&F in repair 60 cm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.
S&F in repair 45 cm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.
S&F in repair PVC(SWR) pipes, 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with PVC clamp and holder bats complete all as per specified and directed .
S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.
S&F in repair 110 mm dia PVC (SWR) bends complete all as specified and directed.
S&F in repair stainless steel grating openable type 100mm dia with/ without hole complete all as specified and directed
S & F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in tranches or in floor etc complete all as specified and directed.
S&F in repair 75 mm bore, PVC (SWR), floor trap, plain with grating including jointing with solvent, cement, complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) bends with access door complete all as specified and directed.
S&F salt glaged stoneware gully trap 150x150mm square or round mouthed, type P, setting and jointing with solvent cement complete all as specified and directed
S&F in repair 110 mm bore, PVC (SWR), Junction, (Single T/Y), equal or unequal with access door complete all as specified and directed.
Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m deep along the existing sewage lines carefully for replacing/taking out SGSW pipe for puncturing of lines for cleaning and getting out in hard/dense soil complete all as specified and directed.
M&L for providing concrete bed to 150mm dia drain pipe in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
Demolition and breaking up drain pipes 150mm dia (salt glazed ware, AC or reinforced concrete) jointed in cement mortar and taking out of trenches or wall if required, complete all as specified and directed.
Returning filling in including spreading, levelling watering & well ramming in layers nexc. 25 Cm thick in each layers complete all as specified and directed.
Removing excavated material to a distence n exc 50m and depositing where directed at a level n exc. 1.50 M above the starting point for any type of soil complete all as specified and directed.
M&L for precast cover slab in RCC 1:2:4, B-1, using 20 mm graded crushed stone aggregates for man holes set in CM 1:4 complete all as specified and directed. Note: Re-inforcement shall be measured and paid separately.
S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 440mm including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.
Taking down existing wash hand basin any type and kept at site in safe custody and refix the same with and including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe, CI brackets, complete all as specified and directed.
S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.
S & F 4mm dia Plain mild steel wire, galvanised class 3, in for mosquito net and for cloth drying including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified and directed. (each line of wire to be measured)
S&F rolled mild steel section Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. complete all as specified and directed.
S&F in repair stainless steel tubing of 25mm dia chromium plated min 1mm wall thickness as in curtain rod complete incl supply and fix 02 Nos stainless steel brackets and finials fency type, stops fixed with as screws etc complete all as specified and directed.
M&L for aluminium sheet 0.5 mm thick fixed with aluminium alloy screws at construction joint, complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
m/s jupiter builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .