Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 CrAccepted-AOC | ₹15.5 Cr | L1 | Accepted-AOC Being lowest bidder |
| 2 | L2₹16.0 CrRejected-Finance 35 B BHERU VILLAS SARDAR CLUB SCHEME AIR FORCE JODHPUR 342 011 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342011 | ₹16.0 Cr | L2 | Rejected-Finance Other than lowest bidder |
| 3 | L3₹16.5 CrRejected-Finance | ₹16.5 Cr | L3 | Rejected-Finance Other than lowest bidder |
| 4 | L4₹16.9 CrRejected-Finance STREET NO 11 SECTOR NO 04 TILAK NAGAR SAGAR ROAD BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | ₹16.9 Cr | L4 | Rejected-Finance Other than lowest bidder |
| 5 | L5₹17.4 CrRejected-Finance | ₹17.4 Cr | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹19.4 Cr
EMD Value
₹13.0 L
Closing Date
12 Aug 2021, 6:00 pmClosed
CE Jodhpur Zone
HQ CE Jodhpur Zone
AUGMENTATION OF WATER STORAGE FACILITY INCL NEW WATER SUPPLY PIPE LINE FROM PHED AND ALLIED INFRA AT MIL STN JAISALMER
2021_MES_445362_1
800519/JSLR/2021-22/E8
Open Tender
Civil Works
990 days
Jaisalmer
Please refer tender documents
9 documents required · 9 mandatory
₹3,000
GE (A) Jaisalmer
₹13.0 L
Yes
HQ CE Jodhpur Zone
20 Sept 2021
24 May 2021
14 Aug 2021
24 May 2021
12 Aug 2021
5 Aug 2021
3 Jun 2021
Amount
Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 26 (R)
Lump sum price worked out by the contractor for "EXCAVATION & EARTH WORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 27 (R)
Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 28 (R)
Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 31 (R)
Lump sum price worked out by the contractor for "ROAD & FOOTPATH" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 33 (R)
Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 34 (R)
Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 35 (R)
Lump sum price worked out by the contractor for "SECURITY FENCING AND GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 36 (R)
Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 37 (R)
Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 41
Lump sum price worked out by the contractor for "DISMANTLING" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No 42 (R)
Sch 'A' Sec-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-II (Excavation and earthwork schedule).
INTERNAL ELECTRIFICATION S & F Energy saving 9 watt LED bulb all as specified and directed
S & F LED wall security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 Sqmm fixed with & including bracket made of GI pipe 40 mm bore light grade, 1.5 mtr long bend to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and directed Note : (a) The LED lights shall have guarantee for 5 years from date of completion of contract, any defects noticed duirng this period shall have be rectified/parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (b) LED light manufacturer lab shall be accredited to NABL.
M&L for Sub main wiring with two runs of 6.0 sqmm and one run of 6.0 sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLSH cable multi stranded copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/accessories all fixed to the surface of wall/ceiling complete all as specified. Note : The two runs of signle core cable and one run of earth contunity conductor with relevant conduit & accessories shall be measured as one run length. The similar extra lengths required for loops etc for connection in DBs are deemed to the included in the rate and the cable only covered in conduit shall be measured
ROAD, PATH AND CULVERT M&L 150 mm thick (compacted thickness) WMM in two layers, 75mm thick each layer with coarse stone aggregate of sand stone flint or quartzite of grading 2 (63 mm to 40 mm size) conforming to grading given in table 400-13 & physical requirement given in Table 400-12 spread with mechanical means rolled and consolidated to required gradient and camber with 8 to 12 tonne vibratory power roller.
SEWAGE DISPOSAL Construction of septic tank 10 users designed to carry sewage and sludge water including excavation and earth work in soft/disintegrated rock/normal rock by mechanical means (with hydraulic paver) foundation in PCC (1:3:6), brick work in CM (1:4), RCC M-25 including CI manhole cover, vent shaft and sludge chamber complete as specified and shown on drawings. (Drg No CEJZ/TD/30 sheet No 1/3 to 3/3)
Construction of Soakage well of size 1.8 mtr dia and 3 mtr depth including excavation and earth work in soft/disintegrated rock/normal rock by mechanical means (with hydraulic paver) foundation in PCC (1:3:6), including intercepting chamber brick work in CM 1:6 RCC cover slab in M-25/RR masonry in CM 1:4 filling with brick bats complete all as specified and directed and as shown on drawing No CEJZ/TD/29/Sheet No 1/3 and 3/3
EXTERNAL WATER SUPPLY Supply, laying, connecting, jointing and testing ductile iron pressure pipe ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, Class K-9 with socket and with cement mortar linng inside the metalic zinc coating with finishing layer of bituminious paint on outside the pipe without polythelene sleeves but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed of the following sizes :-
400 mm dia (16").
350 mm dia (14").
300 mm dia (12").
250 mm dia (10").
200 mm dia (8").
150 mm dia (6").
Supply and fix cast iron sluice valve (flanged ends) of class 1.6 PN with brass spindle ISI marked and installed complete for following sizes :-
(a) 400 mm bore dia pipe
(b) 350 mm bore dia pipe
(c) 300 mm bore dia pipe
(d) 250 mm bore dia pipe
Supply, fixing and testing cast iron reflex valve (NRV) flanged with by pass arragnement suitable for following sizes flanged pipe with nuts, bolts and washer complete all as specified and directed
(a) 300 mm bore dia pipe
(b) 250 mm bore dia pipe
Supply install and fix Foot valve cast iron assembly conforiming to IS-4038 of 350 mm (14") dia valve all as specified and directed
Supply installing, testing and commissioning electric driven centrifugal pumping set capable of discharge 100 LPS at 70 meter head factory assembled comprising of horizontal split casing pump CI body (CI IS210-FG260) with Impellers( ST ST ASTM A351/M-CF8M), Efficiency 83.02%, pump weight 972 Kg, suction 300 mm, delivery 250 mm, Impeller diameter rated 479 mm , Impeller diameter max. 510 mm , pump size SCT250/51, Material of construction 24 MOC-CI260(012)/ASTMA351 CF8M (232)/SS410(253), Max. allowable working pressure 12 Bar.g, operating at 1487 RPM mounted on common MS base plate including PCC foundation 1:2:4 type B1 as per manufacturer's recommendation with MS bolt,Nuts bolts & anti vibration pads complete all as specified and directed by Engineer in Charge/GE. Make: - Kirloskar Brothers Ltd. Note:- Foundation drawing to be submitted by contractor as recommended by manufacturer before commencement of work for approval from Engineer in Charge/GE.
M&L for construction of valve pit chambers of size 1200 x 1200 x 900 mm with brickwork in cement mortar 1:4 (1/2 brick wall) using old size sub class 'B' bricks including 15 mm thick plastering to internal surfaces in CM (1:6) with 3 mm thick MS sheet cover & angle iron frame 40 x 40 x 6 mm with locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer with and including neccessary excavation and earth work in normal/soft disintegrated rock all as specified and as directed by Engineer-in Charge.
Supply and fixing cast iron air release valve with two air outlet, conforming to IS 14845 and fixing up in water supply main of size 150mm dia all as specified and directed
Supply and fixing cast iron air release valve with single air outlet, conforming to IS 14845 and fixing up in water supply main of size 80 mm dia bore all as specified and directed
M & L for cutting of DI water mains raising pipe line 700 mm dia in existing position for branch connection including insertion of Tee DI 700 x 700 x 400 mm with lead joints,collors,rubber coupling,nuts,bolts of suitable size including necessary accessories complete all as specified.
Supply and fixing Electromagnetic flow meter with DC pulsed SS 316 electrodes , SS 316 flanges, fully welded SS 304 sensor construction and housing, Flow transmitter microprocessor based , LD indication for flow rate, forward reverse sum totaliser display , one current (4-20 mA)/one scalable pulse, one status output, IP-67/68, Housing material - Aluminium/ NPT1/2, Liner material- PTFE, process connection material- carbon steel, measuring electrode material- stainless steel 316Ti (1.4571), Calibration certification- ABB standards, signal cable- 20 m long, calibration type - 0.4% factory calibration, No of test points- 03 Nos, Housing type/material - Field mount/single compartment/Aluminium/NPT1/2 complete all as specified and directed by Engr-In-Charge suitable for the pipe :- Make:- ABB/GE (ABB model No.- FEP632.YO.A2.0400.A1.T1.B.1.S.2.A.76.Y.O.Y0A-CMA)
(a) 400 mm bore dia pipe
STANDBY POWER SUPPLY (DG SET) Supply & installation of silent Diesel Engine driven generating set 415 Volts, 3 phase 4 wire as per IS-10002 complete with standard control panel of capacity continuous rating 400KVA/320 KW at NTP conditions with acoustic enclosure and canopy cover including AMF panel as per manufacturer/OEM design and base of size 6m x 2.1m x 80cm considering all derating factors and comprising complete all as specified and as directed of the following : (Note :- (i) Contractor will satisfactorily conduct load test of each DG set for 12 hours including run on 10% ovreload for 1 hour at his own cost.) (ii) Foundation drawing to be submitted by contractor as recommended by manufacturer before commencement of work for approval from EIC. (a) Alternator : Self regulated with brushless self excitation 415 V, 3 Phase, 4 wire 50 Hz, 0.8 PF, 1500 RPM with voltage variation plus or minus 2.5% of rated voltage from no-load to full-load foot mounted screen protected drip proof type with class 'F' insulation, steel ball/roller bearings at both ends of the alternator shaft with necessary controls as recommended by manufacturers confirming to IS-13364, capable of supplying unbalanced load, alternator make Stamford / Crompton / Kirloskar Electric Co. (b) Engine : Multi Cylinder compression Ignition, heavy duty, turbocharged, compact diesel engine water cooled through radiator with water pump, hydraulic governing mechanism, all as per BS - 5514/ IS - 3046 : 1500 RPM class A-1, governing/control guages, RPM / Hours meters etc. shaft H.P suitable for generating application and capable of giving an output of 400KVA/320 KW for coupled alternator under NTP conditions, complete with following : - (i) Flywheel housing with flywheel to suit double bearing coupled alternator. (ii) Flexible coupling set directly mounted to engine and alternator with coupling guard. (iii) Air cleaner dry type with vacuum indicator. (iv) Fuel pump and fuel piping 15 mm M.S pipe with bends, flanges etc. (v) Fuel filter with water separator and filter element. (vi) Lub - Oil filter with filter element. (vii) D.C starter 12 Volts. (viii) Storage Batteris of suitable voltage and ampere - hours as recommended by the manufacturers.
(ix) Industrial type silencer including M.S exhaust pipe rope extended upto 0.5 m outside the bldg fully legged with asbestos 5mm dia all around, over this 50mm thick flat mineral wool insulator sheet cover and then, 24 SWG Aluminium sheet cladding with rivets, all over the length. (x) Support / fixing arrangement for muffler with ceiling through anti vibration pads. (xi) Engine overspeed stop / trip switch. (xii) Radiator with fan. (xiii) Dynamo for battery charging. (xiv) Corrosion inhibitor coolant. (xv) Engine control panel electronic, digital display type consisting of battery voltage indicator, lube oil temp and pressure guages, coolant water temp guage, RPM indicator-cum-hour meter etc. (xvi) Safety controls for alarm due to high water temp (HWT) and low lub oil pressure (LLOP) (xvii) Any other devices /accessories recommended / supplied by the manufacturers as standard eqpt. (xviii) Battery of suitable rating and quantity as recommended by OEM. Make : - Cummins / Greaves / KOEL
(c) Skid : The engine and alternator will be coupled, aligned and mounted on a specially designed common base frame fabricated from M.S channels of suitable cross sectional area and length with bottom drilled holes suitable for and including supplying and fixing anti vibration pads.Make : - Dunlop / Polybond of required size and numbers as recommended by the manufacturers for mounting of 400KVA/320 KW D.G set.
(d) Diesel tank of adequate capacity for 12 hours continuous run on full load with caliberated scale (fuel level indicator) dip stick, fuel inlet / outlet, Air vent, drain plug and inlet arrangement for direct filling, including suitable size gate valve in outlet, tank to be fitted at suitable height. (e) Acoustic enclosure with canopy cover to be provided as per latest CPCB norms. (f) PCC/RCC foundation complete as per manufacturers own design. (g) Documents : Three sets of following documents to be submitted : - Maintenance and operation manuals for engine and alternator, spare parts catalogue, warranty / test certificates, schematic diagrams of control panels. (h) List of tools and three Nos free services by OEM after date of completion as per manufacturers recommended lists, duly priced, item wise. Notes : (i) Testing eqpt will be arranged by the contractor. (ii) Fuel / Oil shall be provided by contractor for load/pre commissioning test. The rate shall be deemed included for this provision.
EXTERNAL ELECTRIFICATION Supply and fix drop out expulsion fuse HT 11 KV grade rating above 50 Amp up to 100 Amps mounted on insulator and steel frame complete all heavy fuse barrel with fuse element complete set conforming to IS: 1818 as specified and as directed by Engineer - in - Charge.
M & L for XLPE insulated,armoured heavy duty electric cable with copper conductor,1100 Volts grade,cross sectional area 120 Sqmm 3.5 core in pipe/trenches/wall/duct including GI clamps with nut, bolt etc complete all as specified
M & L for bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground level connected to galvanized iron strip 32 x 6 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel upto 7.5 from earthing point including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed. Note : Rate quoted shall include the following provisions :- (a) The concrete pit in PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC M-25 reinforced with 8mm TMT bars @10 cm c/c both side with suitable CI handle shall be provided in lieu of CI cover shown in electrical plate No 5 of MES SSR Part-I. (b) Item includes cost of 7.5m GI protection pipe 40mm dia &gi earth strip 32 x 6mm 7.5 m frame earth pit
Supply and fixing Integral LED Street Light Luminaire 35 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 40mm GI Pipe complete with accessories all as specified here-in-after
M&L bracket made of GI pipe 40 mm dia light grade bend to shape not less than 1.5 mtr with 02 Nos of MS clamps fabricated out of MS flat of size 25x4mm including nut, bolts, washers etc complete.
Supply and fix hot pressed moulded SMC junction box light weight suitable for pole mounting including MCB SP 6 Amps single pole and necasry connector for loop in loop out cable connection and suitable size glands of size 250 x200x100mm.
Supply &fix timer switch box fabricated out of 16SWG CRCA sheet with mounting arrangement duly powder coated consisting of following :- (a) Timer FM QT-1 Make L&T/Havells- 01 No (b) Power contactor 80 Amps L&T/Havells- 01 No (c) Connector 100 Amps rating 230 volts -03 Nos (d) MCB 4 pole 100 Amps 415 Volts-01 No
Supply & fix PVC insulted sheathed wire with copper wire flexible 3 core 1.0 Sq mm for connecting street light fitting from pole sintex box to street light complete all as specified
Supplying and laying reinforced precast concrete cable cover class LV, type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed
Supplying and laying reinforced precast concrete cable cover class LV, type 1, flat, size 300mm x 180mm x 40mm complete all as specified and directed
Supply, install erect in true vertical position steel tubular swaged welded poles complet with MS base plat of 6mm thick of size 450mmx450mm finial taper plug pole cap bolt nut and screwed, pole made out of ERW MS tubing conforming to IS-2713 Part-II of 11.00 mtr long 410 SP-55 including drilling of holes of required size and Nos for fixing of cross arms bracing support / taking out of cables etc with inbuilt junction box for 3 phase 4 wire AC supply and painting with one coat of red oxide primer and two coats of aluminium paint for exposed surface and two coats of black bituminious paint for the portion embeded in concrete painting three singal black colour band and two white colour band at lower portion of exposed pole starting from coping alternatively of size 300mm strip at 300 mm spacing complete all as specified and directed by Engineer in Charge Note : Excavation and earth work and PCC shall be measured separately.
Dismantling the existing PCC pole complete all as specified
S&F telephone socket outlet including MS box of size 100 x 100 x 65 mm with cover plate complete all as specified and directed
S&F cable route indicator made out of CI of standard size embedded in PCC (1:3:6) LT/HT engraved complete all as specified
M&L for cutting of road/hardstanding for crossing of DI water pipe line in trenches and making the surface good with PCC (1:2:4) type B-1 using 20mm graded aggregate complete in all respect all as specified and directed
Supply chlorine test kit with colour sample complete with all testing fitment and OT solution in Rexene finished
RAGHUSONS INFRA ENGINEERING PVT. LTD
SHRI GURMUKHDAS CONTRACTORS PVT. LTD.
FRIZO INDIA PVT LTD
ASHISH JINDAL BUILDERS PVT. LTD.
DHARIWAL TRADERS PRIVATE LIMITED
SOOD ASSOCIATES PVT LTD
Vishnu Prakash R Punglia Ltd
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid