Repair Renovation of body Dissection Room in Sharir Rachna Department and Furniture Interior works of Guest House Building at National Institute of Ayurveda Jaipur

Amount

B. Civil Non Schduled Items

NS-1 Providing and laying polished granite stone in dado, pillars, wall lining laid on 12mm (avarage) thick cement mortar 1:3 (1 cement: 3coras sand) and joited with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

NS-2 Providing and fixing kitchen sink cock with swinging casted spout (Wall mounted model)

NS-3 Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS 5382 leving 10mm gap for thermal expansion Floor trap 100 x 75

Bidder Name

Amount

CREATORS ENGINEERS AND INTERIORS(GSTN-07AAGFC0762R2Z1)

bhavya construction company(GSTN-08AAIFB5338A1ZS)

Description of Work / Item(s)

Amount

D. Non DSR Electrical Items

NS-1 SITC of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 10 Mtr (IDU to ODU), copper power cable upto 10 Mtr (IDU to ODU), R-22 Refrigerant, wireless Remote, drain pump,suitable for 400/230V +10% of 50 Hz ,1 /3 phase AC supply capable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll / reciprocating / rotary compressor as specified. 2.0 Ton

NS-2 P & F of IP20 LED batten type light fixture made from CRCA sheet steel housing, suitable for LED tube system (Integral driver), Power Consumption of 18W / 36W / 1500 - 3000 lumens, System lumen efficacy of 80 lm/Watt output life time of 50,000 burning hours with 70% initial lumens maintained. CCT 3000°K, 4000°K & 6000°K. 36W LED light fixture 2'x2' with acrylic / prismatic front cover.

NS-3 P & F of IP20 LED batten type light fixture made from CRCA sheet steel housing, suitable for LED tube system (Integral driver), Power Consumption of 18W / 36W / 1500 - 3000 lumens, System lumen efficacy of 80 lm/Watt output life time of 50,000 burning hours with 70% initial lumens maintained. CCT 3000°K, 4000°K & 6000°K. 4 LED Tube shape fixture 18/22W (Make Phillips)

NS-4 P & F of IP20 LED batten type light fixture made from CRCA sheet steel housing, suitable for LED tube system (Integral driver), Power Consumption of 18W / 36W / 1500 - 3000 lumens, System lumen efficacy of 80 lm/Watt output life time of 50,000 burning hours with 70% initial lumens maintained. CCT 3000°K, 4000°K & 6000°K. Focus Light 100W

NS-5 Providing and fixing of wall bracket fan /Ceiling Fan/ Exhaust Fan. of approved make and type with all required accessories, connector etc. as reqjuired testing and commissioning (Crompton Greaves) 1200mm Ceiling Fan

Exhuast Fan 300 MM

Description of Work / Item(s)

Amount

1(a) Single Bed With Box Single bed with overall size 38"Wx88"LX38"H. The box all four sides and top made of 19mm ISI narked compressed ply board faced with 0.8mm thick laminate on both sides of approved shade with teakwood beading on the edges. The height of box will be 15". The box having open able lid with full length hinges with center wooden support and holder for lid and the bottom of bed made of 12mm ISI Marked compressed ply with 1mm thick laminate on one side. The bed having designer 4" sloped head side made in combination of 8 and 18mm laminated board with slope and supported with 25mm thick vertical supports at the back. The foot side made of laminated board with 32mm thickness.

(b) Outer facia remaining same without storage box

2(a) Double Bed With Box Single bed with overall size 38"Wx88"LX38"H. The box all four sides and top made of 19mm ISI narked compressed ply board faced with 0.8mm thick laminate on both sides of approved shade with teakwood beading on the edges. The height of box will be 15". The box having open able lid with full length hinges with center wooden support and holder for lid and the bottom of bed made of 12mm ISI Marked compressed ply with 1mm thick laminate on one side. The bed having designer 4" sloped head side made in combination of 8 and 18mm laminated board with slope and supported with 25mm thick vertical supports at the back. The foot side made of laminated board with 32mm thickness.

(b) Outer facia remaining same without storage box

3(a) Side Tables/Unit Side table to be made of 18mm thick medium density board. All the eedges provided with machine pressed 0.8mm thick PVC edge bands glued with hot melt EVA glue. The side unit having two drawers fitted on full length ball based telescopic channels and SS handles. size 450x400x400mm

(b) Bed Size Table Supply of bed size table of size 450x400x400mm made out of 18mm thick commercial board and sides covered with 1mm thick laminate with one drawer ride of telescope channels, back with 6mm commercial ply and edges covered with TW/Rubberwood/ lipping finished with polish etc. all cpomplete as per the direction of Engineer-In-Charge.

4 Modular Kitchen Supply and Installation of Modular Kitchen (of Godrej Make) with 16mm marine ply shutters profile handle and 1mm laminate on both sides with the components as follows: List of Components 1. Hinged Unit below Sink-Profile handle Shutter Qty size 600mm 2. Profile Shelf unit- Profile Handle Shutter Qty 1 size 1000mm 3. Filler- Profile Handle Shutter Qty 1 Size 50mm 4. Grocery Unit- Serene-Profile handle Shutter Qty 1 size 500mm 5. Gas Cylinder Unit- Profile handle Shutter Qty 1 Size 500mm 6. 3 drawer unit with Tranquil- Profile handle shutter Qty 1 size 600mm 7. Filler - Profile Handle Shutter Qty 1 Size 30mm 8. Top Plain Shelf unit - Profile handle shutter Qty 1 size 600mm 9. GTPT unit with Pllain Shutter- Profile handle shutter qty 1 size 600mm 10. Bifold gas lift up Unit - Profile handle shutter qty 2 size 600mm

5 Single Bed Mattress Providing single bed mattress of size W78"xL36" , doctor recommended with 5-zoned orthopedic support, signature quilted fabric, naturally cooling coir with durable construction. Make - Duroflex, Levanto, Sleepwell, equivalent.

6 Mattress Protector Providing water proof mattress protector (72X36) with elastic for tucking in the corners. Machine washable soft and textured. Make- Wakefit/Signature/Duroflex.

7 Pillows Providing soft microfiber Pillow 1 size 69cm x 43cm for snug support, Breathable & lightweight with Anti-microbial cover weight around 1 kg. Make - Duroflex, Sleepwell, Vivanto, equivalent.

8(a) Blanket Providing 2 ply Reversible mink Blanket (220cmX155cm) super soft and Extra Warm suitable for extreme cold. Make Signature/ Ddecor.

(b) Providing Mink Blanket (220 cm X 155cm) super soft suitable for mild winters. Make Signature/D decor/equivalent.

9 Bedsheets Providing 100% cotton premium single bedsheet (90"X60") minimum 200 TC of basic colours super soft and durable. Make- Wakefit/Signature/Ddecor/Bombay dyeing/ equivalent.

10 Pillow Covers W78"xL36"Providing 100% premium cotton of minimum 200 TC pillow covers of size 18X27 inches of basic colours super soft and durable. Make : Wakefit/ Signature/Ddecor/Bombay dyeing/equivalent.

11 Dressing Table Supply of dressing table of size 740mmX330mmX1070mm made out of 50X30mm molded teak wood frame with 5mm mirror fixed to 6mm commercial ply backing to fix mirror and fittings to till the mirror all as per drawing including finishing with spirit polish etc., complete as directed by Engineer-In-Charge.

12 Pillow Protectors Providing pillow protectors, soft and textured, machine washable with zip closures. Make: Wakefit/Signature/Duroflex

13 Dining Table Supply of Dining table made out of teak wood frame work and 60X60mm decorative teak wood legs and 90X30mm teakwood side rails and top edging will be 38X15mm thick half round molding commercial board with 1mm thick decorative laminate all edge converter with spirit polish etc all complete as directed by engineer-in-charge (a) 10 Seater (2100mmX1200mmX750mm)

(b) 8 Seater (1800mmX1200mmX750mm)

( c) 6 Seater (1500mmX1200mmX750mm)

14 Dining Chair Supply of Dining Chair with arm of size 430X490X860mm made out of teak wood frame work of size 70X30mm section with 12mm ply wood with 50mm thick high density foam for seat of approved shade of fabric with spirit polish to exposed face etc., all complete as directed by engineer-in-charge. Make- Featherlite, Godrej, Durian/equivalent.

15 Sofa Supply of sofa made out of 50X30mm second class hard wood frame and 100mm thick high density foam on seat & back with 50mm thick rubber foam quilting with 20mm thick U foam 32 density including upholstery with fabric approved shade & quality having with 100X22mm thick teak wood and finish with melamine polish etc. all complete as directed by engineer-in-charge. Make - Godrej/DUrian/featherlite. (a) Single Seat

(b) Two Seater

(c ) Three Seater

16(a) Corner Table Supply of corner table of size 450X450X400mm made out of 48X48mm tapered teak wood legs and side rail 70X25mm thick teak wood and top to have 10mm thick glass with teak wood molding including melamine polish etc., all complete.

(b) Supply of corner table of size 1050X525X400mm made out of 48X48mm tapered teak wood legs and side rail 70X25mm thick teak wood and top to have 10mm thick glass with teak wood molding including melamine polish etc., all completed as directed by engineer-in-charge.

17 TV Cabinet Supply of TV cabinet laminated in colour with matt finish 0.6-0.8mm thickness conforming to IS 2046 latest with having balancing laminated of 0.5mm thick on other side 25mm thickness flat single layer MDF board of grade SBG II of IS 12406 latest L1200mmXD450mmXH750mm (with one shelf), complete as directed by engineer-in-charge.

18 Sofa Chair Supply of sofa chair wooden made out of TW frame work of size 650mmX650mmX750mm with 12mm plywood for seat and back cushioned with 50mm thick foam with fabric of approved shade etc, all complete as directed by engineer-in-charge.

19 Study Table Supply of study table of size 1200X525X750mm made out of 19mm thick commercial board with 1mm thick laminate, having two no's drawers ride telescope sliding channels back to have 19mm thick commercial board with 1mm thick laminate and nail exposed edges covered with teak wood leaping and finish with melamine polish etc., all complete.

20 Study Chair Supply of study chair of size 450X460X880mm made out of teak wood frame work of size 70X30mm section with 12mm plywood with 50mm thick high density foam for seat of approved shade of fabric with spirit polish to exposed facesetc., all complete

21 Fridge Providing 45 ltr direct cool single door refrigerator. Make- Godrej/LG/Sumsung or Equivalent

22 Sanitizer Dispenser Providing and installing auto- sanitizer dispenser of minimum 12 Ltr capacity, fully automatic with LED light for illuminating hands. Adjustable Volume of spray-mist. Removable tank for easy cleaning and refilling, lockable tank to prevent theft and pilferage. Works indoor and outdoor. Make- Kent/Atlantis/Maikcq or equivalent.

23 Kettle Providing Electric Kettle capacity 1.22 Ltr , 1350 watts SS Body and Durable Heating Plate. Make- Prestige/Havells/Philips/Equivalent.

24 Canvas Wall Paintings Providing and fixing canvas wall paintings with wooden frame for room decoration. High quality canvas wooden frame to be used. Size 59X2X59cm. Theme Foral and Multi-colour.

25 Clothes Drying Rope Providing and fixing SS Retractable clothe line adjustable lockable hanging washing line. Maximum Weight capacity 5 to 7 kg, Rope opens upto 9 foot

26 Dustbins Providing SS Zero To Infinity Perforated Round Dustbin 8"X 12" for Dry waste. Cylindrical Shape, Open Top.

27 Rubber Mats Providing non slip black rubber mats with open circular or hexagonal pattern, absorbant made of natural rubber. Size 60cmX40cm. Quality to be approvede by EIC.

28 SS Planters

29 Plastic Emulsion Paint Finishing with Deluxe Miltisurface Paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls/ceiling @1.25 litre/10 sqm over and including one coat of special nprimer applied @0.75 litre/10sqm. Paint to be used - Nerolac/Asian Paint royale.

30 Sun Control Film Make- Garware

31 Panelling Providing and fixing wall panelling using soft wood frame of size 50X25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using: ISI 9mm teak ply one side BWR

32 Providing and fixing designer wallpaper (MRP shall not be less than Rs 1000/ sqm) over wall/partition including preparation of surface etc. as EIC.

33 Providing and fixing stainless steel door silencer on the back of door to protect from striking to wall, complete as per entire satisfaction of EIC.

34 Melamine polishing on veneer and woodwork by scrapping the veneer/wood surface by sand paper for preparing the surface for malamine polish by applying spirit, thinner, sealer, laquer polish and applying approved colour on the prepared surface to give the uniform and desired colour by air compressor and for final finish applying melamine polish by air compressor complete as per direction of EIC

35 Providing and applying of RAFFAELLO Décor vapour premeable polished smooth marble finish for interior/ OTTOCENTO vapour permeable velvet tapestry finish (D-9951) by OIKOS India or equivalent brand, after the cleaning of surface and removing any loose or flacking materials, apply three coat of RAFFAELLO DECOR/OTTOCENTO in approved color and shade on one coat of quartz primer and finish with CERA protective coat to achieve desired finish excluding the cost of surface preparation and scaffolding, apply by trowel and scraper and appropriate tools, all completes as per manufacturer's specification with the direction of EIC.

36 Roller Blinds Providing and fixing Vertical Blinds of Mac/Douglas/ Aerolux/Vista of 100mm wide with extruded powder coated headrail housing control units, spacers, runners, etc all components complete as per directionand satisfaction of EiC. (Mrp shall not be less than Rs 2500/sqm)

37 Supply and fixing of single name plate made of 2mm thick SS with embedded colour alpha numeric signage with provision of adequate holes for fixing on the wall or door and to be fixed with the help of 4nos. Screw/ pvc fastener or as directe by the Eic

38 Supply and fixing of single name plate made of 3mm thick plastic sheet with message and graphics duly plotter cut with provision of adequate holes for fixing on the wall or door and to be fixed with the help of 4nos. Screw/ pvc fastener or as directe by the Eic

39 Supplying and fixing Pin -up board of minimum 10 mm thick and required size with edges covered with minimum frame and surface of board should be covered with velvet pin up cloth (Mrp of the velvet cloth should not be less than Rs 300/m) as per the directions and satisfaction of EiC.

40 Supply and installation of Visitor chairs, mesh back chair of Model Astro of Featherlite/ Jordan of Durian/ Aveo of Godrej with adjustable arms, lumbar support and chrome base complete as per the manufacturer specification, directionand satisfaction of EiC. The agency shall have to submit one year guarantee certificate from the manufacturer,

41 Providing and fixing aluminium extruded section body tubular typeuniversal door clooser (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36kg to 80 kg and door width from 701mm to 1000mm ) with double speed adjustment with all necessary accesories and screws, etc complete.

42 Supply of luggage steel sheet 1mm thick grade 0-1079 and mild steem sheet 1.25mm thick grade 0-1079, overall width 915mm and over all depth 410mm, with necessary accessories and screw etc., complete as directed by E.i.C

43 Providing and fixing Hassian cloth of approved colour and texture over soft wood frame glass wool & fibre glass tissuse paper

44 Providing and fixing 50mm thick resin bounded glass whool 32kg/cum density wrapped in julities cloth bag (box type) and held in position using chicken mesh

45 Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect: New Surface

46 Supplying/making and erecting in position 4mm thick decorative veneer on existing wooden frame of wall as per drawing and design of EIC.

47 Providing and fixing 8mm thick PERGO/Vista or equivalent brand Laminated wooden Flloring (Europian grade classic in light brown colour or as approved)/Skirting having Abrivasion class AC-5, Impact Residence-IC 3, (as per EN 13329), Top surface having a MLC (Multi Layer Composite) High pressure Laminate, top surface treated with Aluminium Oxide surface guard & on the top of High Density fiber board substrate specially development core having smart lock Tounge and Groove joints to secure long lasting joint. The edge of tounge and groove of planks duly impregnated with paraffin. The approved decor planks planks to be placed on combi underlay of 2mm consisting 0.2mm thick Alkali resistant Polyethelene sheet and 1.8mm EPU foam to resist any moisture movement from the sub floor and secure floating floor installation as per the manufacturer specifications and directions, satisfaction of Engineer-In-Charge. (The contractor will have to submit warranty from the manufacturer of flooring for a period of minimum 3 (Three) years or more as per companies norms testing of flooring as per EN13329 is to be carried out from the approved lab.)

48 Providing and placing at site PERGO/VISTA or equivalent brand wooden moulding/beading to cover the junction of floor and wall panelling as per manufacture specification and direction of Engineer-In-Charge

49 Providing and Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595X595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24X38 mm made from 0.33 mm thick (minimum) sheet spaced 1200 mm centre to centre, cross "T" of size 24X28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm centre to centre to form a grid of 1200X600 mm and secondary cross 'T' of length 600 mm and size 24X28 mm made of 0.33 mm thick (Minimum) Sheet to be inter locked at middle of the 1200X600 mm panel to from grid of size 600X600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24X24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main'T' runners to be suspended from ceiling using G.I slotted cleats of size 25X35X1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85X30 X0.8 mm, spaced at 1200 mm centre to centre along main 'T' bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights as per specifications , drawings and as directed by Engineer-in-Charge.

50 Providing and fixing in position 600mm wide built-up cabinet, internal framework, shelves, drawers, lay on slides partitions and shutters 19mm thick pre-laminated particle board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3mm thick teak wood lipping at all edges of the board with polish/enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including concealed soft closing hinges, best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass towerbolt, knobs, SS brush finish handles, locks, etc., all complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.

51 Providing and fixing low Height Storage made out of 19 mm thick MR Grade Ply 45cm deep, 6mm thick MRR Grade Ply for the back, 19 mm thk openable shutters in MR Ply finished with 1mm thk laminate on both sides, hinges as recommended & in Laminate of approved colour. 18 mm thk removable shelves with 1 mm thk laminate on both sides, edges shall be provided with PVC leaping patties on all sides, at 40 cm spacing. All hinges, tower bolts, S.S Brush finish handles, ball-catches shall be of brass heavy duty. Complete with approved make Locks etc complete as per design/instructions. External Surface finished with 1mm thk laminate of approved make & shade, as per design/instructions etc complete.

52 Providing and fixing Full Height Storage made out of 19 mm thk MR Grade Ply 45 cm deep, with internal division as per EIC & 6mm thk MR Grade Ply for the back, 19 mm thk openable shutters in MR Ply finished with 1 mm thk laminate on both sides, hinges as recommended & in Laminate of approved colour. 18 mm thk removable shelves with 1 mm thk laminate on both sides, edges shall be provided with PVC leaping patties on all sides, at 40 cm spacing. All hinges, tower bolts, S.S. Brush finish handles, Ball-catches shall be of brass heavy duty. Compleete with approved make locks etc complete as per design/ instructions. External surface finished with 1mm thk laminate of approved make & shade as per the design/ instructions etc, complete.

53 Door Curtain Supply & fixing of Door Curtain without liining with bottom folding of 100 mm and top folding of 50 mm with provision of 3 pleats in each length 2.15 mts.

54 Window Curtain Supply & fixing of Window Curtain without lining with bottom folding of 100 mm and top folding of 50 mm with provision of 3 pleats in each length 1.5 mts.

55 Drapery Rods Supply and fixing of Drapery Rods including rings brackets with all fixttures and fittings as approved.

56 Reception Table Providing & Construction of Reception Table, Size 2100 L x 750 W x 1050 H mm average dimension, fabricated out of 20mm CBB, flexible ply, recycled veener membrane, veneer in teak finish and corian band counter.

57(a) Television Providing and Installing HD Ready Smart LED TV 32inch Wall mount with 1 year warranty. Make- Samsung/LG/Sony.

(b) 55 inch Full HD LED Display Screen Size 55 (139.7cm) diagonal Aspect Ratio 16:9 Brightness 400cd/m2 Panel Technology IPS Native Resolution 1920X1080 (FHD) Response Time 12ms (G to G BW) Viewing Angle (HxV) 178X178 Dynamic CR 500,000"1 Contrast Ratio 1,300:1 Digital (With HDCP2.2) HDMI2.0(1) Digital (With HDCP2.2) HDMI Yes (1) DVI-D Yes (1) Analog (RGB) Yes (1) Audio in RGB/DVI(1) USB Yes (2) External Control (RS232 C IN) Yes (1) RJ45 Yes (1) HDTV Formats HDMI: 720p, 1080i, 1080p IR Receiver Yes (1) Audio Out Yes External Speaker Out Yes (L/R) External Control Yes (1) Balance Yes Audio Power 20W(10Wx2) for External Speaker On/Off Yes Sound mode Standard, News, Music, Cinema, Sport, Game Clear Voice II Yes Virtual Surround Plus Yes Equalizer Yes Tile Mode Yes (Up to 15x15) Contents Scheduling USB Energy Saving Yes (Minimum, Medium, Maximum, Screen Off) Wi-Fi Dongle ready File Play with USB Yes Installation Wall mount format Warranty 3 Years (Approved Make : Panasonic/ Samsung/LG/Sony

58 Corian Panelling Providing and fixing in position wall/column cladding consisting of 8mm thk CORIAN sheet mounted on solid ply ribbing of 2" X 1" dimension, back lit with LED sripl lights. the entire assembly will be mounted on 12mm thick ply board with veneer finished in approveedd shade. The rest of the panel is to be texture/heritage painted. The item is to be complete in all respects as per design, direction & approval of the EIC.

59 Green Wall (Vertical Garden) Providing and installation of green wall (vertical garden) system, with planter pockets, mounted over 2'X2' aluminium framing, with drip irrigation system , complete in all respects including providing a proper drain channel for the water.

CREATORS ENGINEERS AND INTERIORS

CREATORS ENGINEERS AND INTERIORS

CREATORS ENGINEERS AND INTERIORS

CREATORS ENGINEERS AND INTERIORS

bhavya construction company