Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC ROOM NO A 46 GALI NO 11 GANESH MURTHY NAGAR PART NO 3 CAPT PRAKASH PETHE MARG CUFFE PARADE COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹10.9 L+₹1.5 L (15.9%)Rejected-AOC F 402 AMBIKA APARTMENT PLOT A 9 SECTOR 20 NERUL W NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-AOC Rejected being other than L1 | |
| 3 | Rejected-Technical | - | Rejected-Technical Bid is not in order | |
| 4 | Rejected-Technical 018 GROUND FLOOR LEKHRAJ ENCLAVE LEKHRAJ PANNA SECTOR 2 VIKAS NAGAR LUCKNOW UTTAR PRADESH 226022 | LUCKNOW | UTTAR PRADESH | 226022 | - | Rejected-Technical Bid is not in order |
Tender Value
₹11 L
EMD Value
₹22,000
Closing Date
30 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (CG) RATNAGIRI
Military Engineer Service Garrison Engineer I CG Ratnagiri SLUY Shed Plot, W19 23 MIDC Mirjole Ratnagiri 415 639
PROVISION OF ADDITION / ALTERATION TO VIJAY BLOCK (BUILDING No. P3) AT ICGS RATNAGIRI.
2024_MES_635426_1
8194
Open Tender
Civil Works
Item Rate
120 days
RATNAGIRI
As per tender documents
8 documents required · 8 mandatory
₹500
GE (I) (CG) RATNAGIRI
₹22,000
Yes
6 Apr 2024
2 Jan 2024
1 Feb 2024
2 Jan 2024
30 Jan 2024
16 Jan 2024
Amount
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
Demolition of stone slabs and tiles of any thickness or description in floors, aprons etc laid bedded and pointed in any mortar.
Demolition of concrete of any description and in any position not otherwise specifically provided as in roof padding.
Taking down chowkhats or frames not exc. 1.5 sq. m each without taking off shutters from frames.
Taking down chowkhats or frames but with shutters (without taking off shutters from the frame)exc 1.5 sq. m but n exc 4 sq. m each.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Dismantling water tanks of capacity exc 250 and not exc 500 litres.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Taking up or down steel tubing and connections of dia 20 mm , including cleaning for refixing or removal to store.
Taking up or down steel tubing and connections of dia 15 mm , including cleaning for refixing or removal to store.
M&L for 75 mm thick cement concrete type B- 2, 1:3:6 (40mm graded aggregate) and finishing surface even and smooth with using extra cement.
S&F stainless steel (Grade 304) hand railing with 50mm bore dia pipe and 1.5 mm thickness as handrail welded to baluster of bore dia 25mm and 1.5mm thickness of length 20cm and embedded in floor to a depth of 100mm at 1 m c/c with cement grouting and welded to mild steel anchor plate of dimension 50x50x6 mm and other necessary fixtures, making good with existing surface complete all as specified and directed by Engineer-in-charge.
M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar 1:4.
M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3.
M&L for double charges vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M&L for double charges vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M&L for coloured glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match
M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each
S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane
S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
S&F steel for hold fasts of doors.
S&F 30 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match.
S&F glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.
S&F stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks of galvanised wire staples.
S&F SS 100 mm long butt hinges, heavy weight, cold rolled mild steel, and fixed.
S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed.
S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F Aluminium handles, cast type, anodised of size 150 mm.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F 150 mm long cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.
M&L for preparation of new or previously untreated suface and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F aluminium grill for windows and ventilators.
S&F Rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.
S&F in repair Ball brass valves 25 mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.
S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F Tubes of 20 mm dia , 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.
S&F Tubes of 15 mm dia , 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.
S&F in repair angle valves 15 mm dia fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm.
Supplying PVC valveless, syphonic action type, flushing cistern of 10 litres , low level, white, with inlet, ball valve, float, handle and flush pipe of polyethylene of low or high density or PVC. 32 mm including brackets.
S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests.
S&F vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)
Supplying Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
S&F in repair bib taps 15 mm dia fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F two way bib tap fancy type chromium plated 15 mm dia.
S&F health faucet 15 mm dia with accessories for wall fixing.
S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).
S&F in repair Waste coupling of PTMT suitable for urinals (half or full threaded) . (Minimum weight 32mm- 45gms).
S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms).
S&F in repair grating round 140 mm size of PTMT. (Minimum weight 50gms).
S&F in repair Vitreous China Urinal, Half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).
S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding taps,waste, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
S&F in repair pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S&F in repair PVC (SWR)110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.
S&F in repair 110 mm dia PVC (SWR) bends any radius.
S&F 100 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal.
S&F in repair 110 mm dia PVC (SWR) 'S' trap.
S&F 110 mm dia PVC (SWR) 'P’ trap.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement.
S&F in repair 75 mm dia PVC (SWR) bends any radius.
S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms).
M&L for priming surfaces and applying heavy treatment (for severe conditions), using bitumen primer for use in [email protected] litres/sqm.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
M&L for rendering 15mm thick on fair faces of stone masonry or concrete surfaces in cement mortar 1:3 and finishing even and smooth without using extra cement with integral waterproofing compound @3% by weight of cement.
M&L for rendering 10mm thick on fair faces of stone masonry or concrete surfaces in cement mortar 1:4 and finishing even and smooth without using extra cement.
Supplying integral waterproofing compound.
M&L for rendering 5 mm thick on fair faces of stone masonry or concrete surfaces in cement mortar 1:4 and finishing even and smooth without using extra cement.
M&L for preparation of newly plastered surfaces of walls and applying two coats of acrylic weather proof paint over a coat of primer.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over a coat of putty.
M&L for 40mm thick cement concrete type B- 0, 1:2:4 (12.5 mm graded aggregate) as in roof padding finished even and smooth with using extra cement.
M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/disintegrated rock.
M&L for hardcore broken stones/boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
M&L for 75 mm thick cement concrete type C- 2, 1:3:6 (40mm graded aggregate) and finishing surface even and smooth without using extra cement.
M&L for screed bed or bedding layer of cement mortar (1:4) 15 mm thick for laying floor finishes.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat grey cement slurry and pigment in floors .
M&L for RCC NP3 150 mm diameter Pipes laid on150 mm thick PCC 1:4:8 bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.
M&L for on site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 users
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, bell,bell push,regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc.
Taking down unservicable/partly unservicable street light /light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to match with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes, for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)
Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces
Point wiring with PVC insulated unsheathed FRLS stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 25 mm dia.concealed in walls/roof/floors with MS sheet metal sunken modular switch/Terminal box 1.0 mm thick and Modular plate and brass screws with cup washers all as directed and specified Note : (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling (2) Sub Circuit shall be 2.5 sqmm from D.B to switch Board. (a)One light point controlled by one, one way switch
(b) One ceiling /exhaust fan point controlled by one switch and regulator
(c) one 3 pin 5 amp socket out point on the same board with other switches.
(d) One3 pin 5 amps socket out let point on independent board
All as per same in item No 88.03 above but for one socket outlet 15/16 Amp on independent board with 2.5 Sq mm cable and 2.5 Sq mm earth wire. ( power point 15/16 Amps sockets) Note : (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling (2) Sub Circuit shall be 4.0 sqmm from D.B to switch Board.
All as per same in item No 89 above but for one socket outlet 15/16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire. Note (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling (2) Sub Circuit shall be 4.0 sqmm from D.B to switch Board.
S &F Modular switch 1 way 5A/6A,1 module
S &F Socket, 5A/6A - 2/3 pin combined 2module
S &F Socket 6A/16A - 6 pin combined 2 module
SHEET METAL ENCLOSURES WITH SOCKET PLUG TOP AND MCBs Double pole and neutral enclosure with a two pin and earth plug and socket complete with one Double pole MCB
S &F Modular switch 1 way 15/16A,1 module
S &F Electronic regulator 100/120 Watt step type
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack ,1x10 Watt ,2 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block etc with all assoceries internal prewired & including connecting up with 2 core flexible copper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nosetc.
Supply and fixing LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed by Engr-in-charge. (Note : Old Fan will be taken on Charge)
Supply and fix exhaust fan, METAL body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as directed by Engr-in-charge
MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection grade,L&T / LEGRAND / equivalent of ABB
MCB SP 20 A Volts, 'C' series, breaking capacity 10 KA
MCB SP 16 A Volts, 'C' series, breaking capacity 10 KA
MCB SP 6 Amps 'C' series, breaking capacity 10 KA of rating
S & F ISI marked RCBO 40 A, 30 mA, 230 V DP for AC applications, conforming to IS 12640 (Part-2)- 2016, having front face indication for earth leakage fault, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters complete all as specified and directed (for incoming SPN DB )
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out in soft/disintigrated rock for cable, pole etc complete all as specified and directed.
Returning, filling in ,including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soft/disintegrated rock complete all as specified and directed.
Removing excavated material soft/disintigrated rock to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for cutting of Extg GI Pipe line of size 150 mm to 200 mm bore with 80/100 mm brass ferrule for taking branch connection including all necessary fittings complete all as specified.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/trenches complete of size outer dia 25 mm all as specified and directed by Engr-in-charge.
Taking up or down old existing G I Pipe 25/32mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed
Taking up or down old existing Gate valve 25/32mm including cleaning for refixing or removal to store complete all as specified and directed
Supply and fix PP-R Gate Valves (Brass Insert) of 25 mm bore outer dia.
M&L for construction of stone masonry valve pit as per of size 60 x 60 x60 cm (internal dimesion complete with 30 x 30 x6 mm MS angle iron frame, 3mm thick MS Top cover with locking arrangement including two coat of black bitumionous paint over a coat of red oxide primer on steel surface all as specified and directed by Engr-in-charge
Taking down/Dismantling of cable XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of any size complete all as specified and making good disturbed sufaces to match with the existing surfaces.
Supply and laying DWC (Double wall Corrugated ) duct pipe outer dia 63 mm and inner dia 50 mm conforming IS 16205 (Part 24 ) for protection of electric cable complete all as specified and directed.
Steel tubing GI light grade 50 mm dia for cable protection passing under road /floor or for fixing to poles all as specified and as directed .
Supply,laying and testing of cable XLPEinsulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sq mm 2 core.note- rate is inclusive of cable gland & cable lugs.
Advait Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .