Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹38.5 L+₹5.6 L (17.1%)Rejected-Finance | L2 | Rejected-Finance Other than L1 bidder | |
| 3 | L3₹39.1 L+₹6.3 L (19.1%)Rejected-Finance MOHANPUR PT LL HOUSE NO 00 CITY TOWN SILCHAR P O KATIRAIL P S KATIGORAH DISTRICT CACHAR PIN 788804 | CACHAR | ASSAM | 788804 | L3 | Rejected-Finance Other than L1 bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
PROVN OF ENTRANCE GATE AT DEPOT ENTRANCE ALONG WITH ALLIED ACCESSORIES AT ABOD UNDER GE NARANGI.
2023_MES_604474_2
8669/NAR/E8
Open Tender
Civil Works
Item Rate
180 days
Narangi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Narangi
₹70,000
Yes
26 Oct 2023
26 Aug 2023
18 Sept 2023
26 Aug 2023
16 Sept 2023
2 Sept 2023
Amount
Excavation over areas not exceeding 1.5 deep and getting out in soft/loose soil complete all as specified and directed.
Excavation over area each additional 1.5m or part thereof in depth beyond the first 1.5 m and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.50M deep and not exceeding 1.50 M width for foundation, etc or for shafts well and getting out in soft/loose soil complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.
Material and labour for hardcore of broken stones or boulders of gauge not exceeding 63mm, deposited, spread & levelled in layers n exc 15cm thick, watered & rammed to a true surface all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6, type C-2, (using 40 mm graded stone aggregates) as in plinth protection, path, hard standing etc, finished even and fair without using extra cement all as specified and directed.
Material and labour for cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
Material and labour for brick work with sub class "B" bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:4 complete all as specified and directed.
Material and labour for brick work with sub class "B" bricks, straight or curved on plan exceeding to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Material and labour for rendering 15mm thick in two layers (10+5mm) in CM 1:4 on fair faces of brick/concrete surfaces finished even and fair without using extra cement with using WPC @200ml/50kg of cement on top layer of plaster (on 5mm) complete all as specified and directed. Note: WPC shall be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified and directed.
Material and labour for forming square grooves in plaster not exceeding 12mm deep and not exceeding 15mm on face all as specified and directed.
Supply and fixing rolled mild steel as in doors or gate of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door and fastening and fixing complete of Fe-410-W(Gde E-250) quality-A complete all as specified and directed.
Supply and fixing of framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw including bending and welding angels as necessary. Gussets plates, riveting etc. not exceeding 10 Kg each brackets, conforming to Fe-290 Gde-E-165 (Brackets over 10 Kg each to be measured under 'Structural Steel).
Supply and fixing mild steel plates (Plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Material and labour for Painting of iron surfaces of any description over 10 cm in width or girth, not otherwise described, including preparation of new surfaces with red oxide primer and two coats of synthetic enamel (ordinary tint) paint complete all as specified and directed.
Material and labour for Painting of iron surfaces of any description, not exceeding 10 cm in width or girth, not otherwise described, including preparation of new surfaces with red oxide primer and two coats of synthetic enamel (ordinary tint) paint complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of walls, chajjas, parapets, pilasters etc and applying two coats of acrylic emulsion exterior weather proof paint (100% Acrylic) on external surfaces over a coat of primer complete all as per manufactures instruction and as specified and directed.
Material and labour for RCC M-25 (design mix) (using 20 mm graded stone aggregates) as in foundation including rafts, footings, foundation beams, plinth beams, base for columns, etc. complete all as specified and directed.
Material and labour for RCC M25 (design mix) (using 20 mm graded stone aggregates) as in columns, pillar, piers, posts and struts etc complete all as specified and directed.
Material and labour for RCC M25 (desing mix) (using 20 mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels, chajja over 5m span complete all as specified and directed.
Material and labour for RCC M25 (design mix) (using 20mm graded stone aggregates) as in wall, retaining wall, basement wall and the like in any thickness above top of footing including attached pilasters and buttresses complete all as specified and directed.
Material and labour for RCC (1:1½:3) of 450mm dia type Al as in bored pile 6m length from cut off level complete all as specified and directed.
Material and labour for formwork to fair finished flat surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.
Material and labour for formwork to rough finished flat surfaces to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.
Material and labour for formwork to rough finished flat surfaces to sides & soffits of floor or roof beams, beam haunchings, girders, bresumers, lintels, cantilevers, shelves including supports, overhangs etc., also splays between floors & beams etc all as specified and directed.
Material and labour for formwork to rough finished flat surfaces to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc., vertical or to batter all as specified and directed.
Material and labour for formwork to rough finished flat surfaces to soffits of suspended slabs, floor slabs, landings and similar work, not exceeding 200 mm thick (Horizontal or sloping) all as specified and directed.
Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape as required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0 90 mm dia all as specified and directed.
Material and labour for TMT bars 6 mm to 8 mm dia, cut to length, bent to shape as required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia all as specified and directed.
All as per Item No. 30.00 here in above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders all as specified and directed.
Supply and fixing stainless steel letter or figure ( block, roman, italic or Indian) up to 60 cm high with LED light & SMPS complete all as specified and directed.
Material and labour for interlocking tiles glossy finish coloured of approved design/ pattern, 100 mm thick conforming to IS 15658-2006 of 100 mm thickness M-50 Grade laid over and including fine sand cushion not less than 25mm thick to a line surface, slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and as per manufacturer’s instructions and directed. Note: Sand cushion shall be paid separately under relevant Item.
Material and labour for sand filling under interlocking tiles, sand cushioning to cable trenches or in foundation including watering and consolidation complete all as specified and directed. Note:- Sand cushioning under cable trenches shall be 150mm below the cable and 80mm above the cable and punned down to a thickness of 180mm which shall be measured and paid.
Material and labour for providing precast cement concrete solid blocks as in kerb stone in PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) exc. 10 cm in width setting in CM 1:4 complete all as specified and directed.
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.
Returning, filling in, including spreading, leveling, watering & well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.
Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil complete all as specified and directed.
Supply and fixing of post top fitting, aesthetically designed with symmetrical light distribution with LED 20 watt, should have luminaries efficacy ≥70 lumens/watt, CCT= 5700K, PF>0.9, P65 with inbuilt surge protection complete all as specified and directed.
Supply and fixing LED bulkhead light of 12W with pressure die-cast housing along with polycarbonate diffuser and LED's IP-65 protection of watt, PF>0.95 complete all as specified and directed.
Material and labour for sub main wiring with two single core PVC insulated unsheathed cable 1100 volts grade, 2.5 Sqmm size with multistranded copper conductor FRLSH cable (with colour code), drawn in but including PVC conduit not less than 25 mm ISI marked including all accessories, including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed. Note:- 2 run of 2.5sqmm cable+ 1 run of 2.5sqmm earthed cable+ 1 run of PVC conduit shall be measured as one unit.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric underground cable with solid aluminum conductor, 1100 Volts grade of size 10 Sqmm 2 core laid in trenches /floor or fixed on wall/pole including brass compression cable glands, terminal lugs etc, complete all as specified and directed. Note:- Sand cushioning shall be measured and paid seperately under relevant item.
Supply and fixing street light junction box of size 250 x 200 x 105mm made of high quality sheet moulding compound with IP-66 protection (Dust and vermin proof according to IEC-60529). Totally insulated with MCB, DP, 10KA, 16 Amps to be fixed on Din rail with locking arrangement with cable gland suitable upto 16 Sqmm cable and necessary fixing arrangements such as clamps, nuts, bolts etc all as specified and directed.
Material and labour for erection of steel tubular swaged pole type 410 SP-31 (9.00 metres long) including cast iron base plate, finial taper plug and painted with two coats of synthetic enamel paint over a coat of red oxide primer including PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation and PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping complete all as specified and directed.
Material and labour for street light bracket made out of 40mm bore medium grade GI pipe (minimum length 1.50 mtr) with two sets clamps with nuts and bolts, bend to shape for fixing LED street light fitting complete duly painted with two coats of synthetic enameled paint over a coat of red oxide primer on steel surfaces all as specified and directed.
Supply and fixing LED street light of capacity 60 Watt made up of pressure die cast aluminum housing with high power LED as light source and lens embedded PC cover including electronic driver, should have system luminaries efficacy ≥110 lumens/watt, CRI>70, PF> 0.95, CCT≥5500, IP66, impact resistance IK 07, inbuilt protection against lightning, over voltage, short circuit and surge/spike protection device upto 5kV complete all as specified and directed.
Material and labour for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors complete all as specified and directed.
Material and labour for Sub class ‘B’ old size well burnt brick laid flat in trenches over the LT cable for protection complete all as specified and directed.
M/S M Ahmed and Co.
M/S Bharat Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .