Construction of Farm Implement shed, Meteorological observatory area, Left out Landscaping work, solar car parking area and other misc work

Grand Total 33,408,395.15

Bill of Quantity

Sl No. DSR2018 Description of Items unit Quantity Rate DSR Non DSR

1 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, sqm 13100.00 12.55 164,405.00

trees and saplings of girth up to 30 cm measured at a height of 1 m above

ground level and removal of rubbish up to a distance of 50 m outside the

periphery of the area cleared.

2 2.28 Surface dressing of the ground including removing vegetation and

inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to

50 m and lift up to 1.5 m.

3 2.6 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in

width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

4 1.1A Carriage of materials By Mechanical Transport including loading,unloading cum 1666.61 131.17 218,609.23

and stacking upto 1km

5 1.1B Carriage of materials By Mechanical Transport including loading,unloading cum 450.00 149.43 67,243.50

and stacking from 1km to 2km.

6 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 cum 150.00 5,789.60 868,440.00

mm nominal size)

7 11.5 62 mm thick cement concrete flooring with concrete hardener topping, sqm 1500.00 854.30 1,281,450.00

under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick

cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded

stone aggregate, 6mm nominal size) by volume, hardening compound

mixed @ 2 litre per 50 kg of cement or as per manufacture’s

specifications. This includes cost of cement slurry, but excluding the cost

of nosing of steps etc. complete.

8 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth level :

4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone cum 12.15 7,210.55 87,608.18

aggregate 20 mm nominal size)

9 5.9 Centering and shuttering including strutting, propping etc. and removal of

9.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 48.00 284.85 13,672.80

9.2 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 36.00 733.70 26,413.20

10 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, kg 270.00 83.50 22,545.00

bending, placing in position and binding all complete upto plinth level .

Thermo-Mechanically Treated bars

11 9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to

windows and clerestory windows using wire gauge with average width of

aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

9.135.2 With 12 mm mild steel U beading sqm 80.00 1,001.50 80,120.00

12 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes

etc.) trusses etc., including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer, including welding and bolted with

special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes kg 18000.00 143.45 2,582,100.00

13 12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface

fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with

bitumen and G.I. limpet washers or with G.I. limpet washers filled with

white lead, including a coat of approved steel primer and two coats of

approved paint on overlapping of sheets complete (up to any pitch in

horizontal/ vertical or curved surfaces), excluding the cost of purlins,

rafters and trusses and including cutting to size and shape wherever

12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² sqm 675.00 1,061.80 716,715.00

14 13.61 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

13.61.1 Two or more coats on new work sqm 1350.00 121.55 164,092.50

15 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 131.10 7,590.45 995,108.00

12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly

light weight calcium silicate false ceiling tiles of approved texture of

size 595 x 595 mm in true horizontal level, suspended on inter

locking metal grid of hot dipped galvanised steel sections (galvanising

@ 120 grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and of size

24x38 mm made from 0.33 mm thick (minimum) sheet, spaced

1200 mm centre to centre, and cross “T” of size 24x28 mm made

out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between

main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm

and secondary cross ‘T’ of length 600 mm and size 24 x28 mm sqm 60.00 1,643.95 98,637.00

made of 0.33 mm thick (Minimum) sheet to be inter locked at middle

of the 1200x 600 mm panel to from grid of size 600x600 mm, resting

on periphery walls /partitions on a Perimeter wall angle pre-coated

steel of size(24x24X3000 mm made of 0.40 mm thick (minimum)

sheet with the help of rawl plugs at 450 mm centre to centre with 25

mm long dry wall screws @ 230 mm interval and laying 15 mm

thick densified edges calicum silicate ceiling tiles of approved texture

in the grid, including, cutting/ making opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever

required. Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with

galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at

1200 mm centre to centre along main ‘T’, bottom exposed with 24

mm of all Tsections shall be pre-painted with polyster baked paint,

for all heights, as per specifications, drawings and as directed by

Engineer-in-Charge

16 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:

17 13.41 Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :

13.41.1 New work (two or more coats) over and including water thinnable priming sqm 350.00 153.45 53,707.50

coat with cement primer

18 16.8 Brick edging laid lengthwise with half brick depth including excavation,

refilling and disposal of surplus earth lead upto 50 metres :

16.8.1 With common burnt clay F.P.S. (non modular) bricks of metre 204.00 46.75 9,537.00

class designation 7.5

19 16.71 Providing and fixing G.I. chain link fabric fencing of required width in mesh sqm 300.00 909.60 272,880.00

size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with

2 mm dia wire or nuts, bolts and washers as required complete as per the

direction of Engineer-in-charge.

20 16.68 Providing and laying 60mm thick faciory made cement concrete sqm 200.00 859.35 171,870.00

interlocking paver block of M -30 grade made by block making machine

with strong vibratory compaction, of approved s;ze, design & shape, laid in

required colour and pattern over and including 50mm thick compacted

bed of coarse sand, filling the joints with line sand etc. all complete as per

the direction of Engineer-in-charge.

21 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid

on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

cement and matching pigments etc., complete.

22 11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sqm 600.00 (677.55) (406,530.00)

sand) bedding in laying of floor tiles and jointing with grey cement slurry @

23 11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer sqm 600.00 587.20 352,320.00

modified quick-set tile adhesive (Water based) conforming to IS: 15477, in

average 3mm thickness.

24 0020 Hydraulic Excavator (3D) with driver and fuel day 40 7,000.00 280,000.00

25 0039 Tractor with trolley day 30 1,350.00 40,500.00

26 0050 Motor Grader 3.35 metre lade hour 95 2,450.00 232,750.00

27 0052 Front end loader 1 cum bucket capacity (incl POL) hour 240 900.00 216,000.00

28 0056 Tandem Road Roller hour 40 1,200.00 48,000.00

30 9.18 Providing and fixing Pre-laminated flat pressed 3 layer (medium density)

particle board or graded wood particle board IS : 3087 marked, with one

side decorative and other side balancing lamination Grade I, Type II

exterior grade IS : 12823 marked, in shelves with screws and fittings

wherever required, edges to be painted with polyurethane primer (fittings

to be paid separately).

31 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow kg 250 575.45 143,862.50

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side of waist slab

with suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners

Non schedule items

30 NS1 Supply, installation, testing and commissioning of desert air cooler of tank each 150.00 6,438.10 965,715.00

capacity min. 30 lit.,, power consumption not more than 500 watt, with

three speed setting, dimension minimum 40x40x60 cm, body plastic and

other suitable material including three pin plug, socket, holder, wire MS

frame of 900 mm height (or as per window height) complete in all respect

as per direction of engineer-n-charge. The vendor should complete the

electification arrangement from the nearby source and nothing extra such

as cost of wire, socket etc. shall be payable.

31 NS2 Providing and fixing polycarbonate sheet multiwall 10mm as per direction sqm 360.00 1,228.50 442,260.00

32 NS3 Supply of Multipurpose Chairs with Back Finish in Plastic Moulded/PP & each 25.00 3,577.40 89,435.00

Seat finish in Plastic Moulded/Leatherite as per approved shade with

powder coated pipe frame work/base.Chairs shall be with arms rest and

note pad base for writing assitance complete in all respect as per direction

of engineer-in-charge.

33 NS4 Pest/rodent control service for Academic and Administrative building for job 1.00 121,632.30 121,632.30

period of one year with the following:

First line of Control: Tamper-proof Rodent Bait Stations (Rodabox) to be

installed along with the inner side of the boundary wall .

Second line of Control: Tamper-proof Rodent Bait Stations (Rodabox) to

be installed along with the external periphery of the production /

warehouse facility.

Third line of Control: Rodent Bait Stations to be installed in some sensitive

areas in the facitity. Only Trubble Gum traps to be used in these stations.

No rodenticide (rodent bait) to be applied inside the facility.

Total of civil works 11,017,335.35 1,619,042.30

34 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors wherever

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with Each 2 5421.50 10843.00

integral type foot rests

35 17.2 Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device

(handle lever), conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 2 5260.95 10521.90

36 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:

13983 with C.I. brackets and stainless steel plug 40 mm, including painting

of fittings and brackets, cutting and making good the walls wherever

17.10.1 Kitchen sink with drain board

37 17.16A Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter Each 2 297.55 595.10

long with S.S. Triangular plate to european type W.C. Of approved quality

and make as approved by engineer in charge.

38 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:

17.7.4 White Vitreous China Flat back wash basin size 550x Each 4 2510.45 10041.80

400 mm with single 15 mm C.P. brass pillar tap

39 17.22A Providing and fixing CP Brass 32mm size bottle trap of approved quality & Each 4 883.05 3532.20

make and as per the direction of engineer in charge.

40 17.28 Providing and fixing P.V.C. waste pipe for sink including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

41 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling Each 1 45.00 45.00

of approved municipal design.

42 17.32 Providing and fixing mirror of superior glass (of approved quality) and of

required shape and size with plastic moulded frame of approved make

and shade with 6 mm thick hard board backing :

17.32.2 Rectangular shape 453x357 mm Each 4 1120.25 4481.00

43 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 Each 4 228.20 912.80

mm wide with minimum distances of 37 mm from wall face with concealed

fittings arrangement of approved quality and colour, weighing not less

44 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width Each 2 595.50 1191.00

78 mm and effective height of 88 mm, weighing not less

45 18.18 Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

46 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore Each 10 83.00 830.00

47 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931.

48 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading

the pipe and making long screws etc. complete (New work) :

49 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to

18.49.1 15 mm nominal bore Each 8 418.95 3351.60

50 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighting not less than 810 gms.

18.50.1 15 mm nominal bore Each 1 618.80 618.80

51 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

18.53.1 a) 15 mm nominal bore Each 10 532.00 5320.00

52 18.65 Providing and fixing PTMT soap Dish Holder having length of Each 4 130.50 522.00

138mm,breadth 102mm, height of 75mm with concealed fitting

arrangements, weighing not less than 106 gms.

53 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

54 12.43 Providing and Fixing on wall face unplasticised - PVC pipe clips of

approved design to unplasticised - PVC rain water pipes by means of 50 x

50 x 50 mm hard wood plugs, screwed with M.S. screws of required length

including cutting brick work and fixing in cement mortar 1:4 (1 Cement: 4

Coarse sand) and making good the walls etc. complete

55 18.8 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having

thermal stability for hot & cold water supply including all CPVC plain &

brass threaded fittings including fixing the pipe with suports, clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good

the same including testing of joints complete as per direction of Engineer-

Concealed work including cutting chases and making good the walls

56 18.12 Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching

and refilling etc.

56.1 18.12.6 50 mm dia nominal bore Metre 35 565.25 19783.75

56.2 18.12.7 65 mm dia nominal bore Metre 65 716.00 46540.00

57 18.16 Providing and fixing brass stop cock of approved quality

58 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) :

58.1 18.17.1 25mm dia nominal bore Each 2 497.15 994.30

58.2 18.17.2 32mm dia nominal bore Each 1 581.25 581.25

58.3 18.17.3 40mm dia nominal bore Each 1 678.40 678.40

58.4 18.17.4 50mm dia nominal bore Each 1 869.20 869.20

59 18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two

coats over a ready mixed priming coat, both of approved quality for new

18.38.6 50 mm dia nominal bore Metre 100 39.80 3980.00

60 18.48 Providing and placing on terrace (at all floor levels) polyethylene water Litre 13500 8.8 118800.00

storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

61 2.10 Excavating trenches of required width for pipes cables etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m ncluding getting out the excavated soil , and then returning the

soil as required , in layers not exceeding 20 cm in depth including

consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed , within a lead of 50 m.

2.10.1 All kind of soil

2.10.1.1 Pipes, cables etc. not exceeding 80mm dia. Metre 300 223.00 66900.00

62 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete

with C.I. grating brick masonry chamber with water tight C.I. cover with

frame of 300 x300 mm size (inside) the weight of cover to be not less than

4.50 kg and frame to be not less than 2.70 kg as per standard design :

19.4.2 150 x 100mm size P-type

19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation Each 4 2317.40 9269.60

63 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc. complete :

64 19.7 Constructing brick masonry manhole in cement mortar 1:4 (1cement : 4

coarse sand) with RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand

4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8

mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal

size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) finished with a floating coat of neat

cement complete as per standard design.

19.7.1 Inside size 90 x 80 cm and 45 cm deep including pre-cast R.C.C. manhole

cover and frame of required shape and approved quality H D - 20 Circular

shape 560 mm internal diameter.

19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 4 10915.65 43662.60

65 8.10.2 Providing and fixing stone slab with table rubbed, edges rounded and sqm 2 3216.90 6433.80

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter and

embedding the stone in the chase with epoxy grout or with cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6

mm nominal size) as per direction of Engineer-in-charge and finished

Granite Stone of approved shade

66 17.23 Providing and fixing white vitreous china flat back or wall corner type each 2 1299.75 2599.50

lipped front urinal basin of 430x260x350 mm or 340x410x265 mm

sizes respectively.

67 NS5 Providing and fixing chrome plated grating with ring and two S.S screws of Each 4 302.20 1,208.80

approved design with grating screwed down to the ring with s/s screws

and embedding and setting ring into the floor with cement mortar .(As per

approved make or equivalent)

68 NS6 Providing and fixing uPVC pipes type -B conforming to IS: 13592 for soil, -

waste and vent pipes including all fittings rubber ring type (plain or with

access door) e.g. bends, junctions, cowls, offsets, access pieces, jointing

with rubber ring joints with lubricant etc. fixed with clamps to walls.

For soil, waste and vent pipes -

110 mm OD (6 kg pressure) Metre 70 553.50 38,745.00

70 NS7 Providing, fixing, jointing and testing in position the following uPVC pipes -

conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings,

solvent weld joints, testing complete for drainage system cut to required

length to be laid under floor and making good the same complete as

For waste pipes -

70.1 7.1 40mm OD (6 kg pressure) Metre 20 128.40 2,568.00

70.2 7.2 50mm OD (6 kg pressure) Metre 6 181.30 1,087.80

70.3 7.3 63mm OD (6 kg pressure) Metre 12 294.60 3,535.20

71 NS8 Providing and fixing uPVC cleanout plug with openable cap for uPVC Each 2 309.70 619.40

72 NS9 Providing and fixing 110x110 mm uPVC 'P' trap with 2-3 inlets required -

size ftting with seal 50 mm of self cleansing design floor/urinal trap without

vent suspended with supporting clamp or in sunken portion including

cutting and making good the walls and floors wherever required complete

in all respects.

73 NS-10 Providing & fixing PVC inlet fitting with one or more inlets fabricated from Each 2 581.70 1,163.40

110 mm outer dia UPVC pipe and solvent welded sockets and fixed to

UPVC Trap and as per drawing complete

74 NS-11 Providing and fixing P.V.C. WC Connector (Straight/ or bend Type) with Each 2 506.20 1,012.40

rubber lip ring, including 110mm dia PVC Pipe/ Bend of required length

and proper connection with M seal to C.I./PVC Pipe Complete as required

75 23.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable

method prescribed in IS: 2800 (part I), including collecting samples from

different strata, preparing and submitting strata chart/ bore log, including

hire & running charges of all equipments, tools, plants & machineries

required for the job, all complete as per direction of Engineer -in-charge,

up to 90 metre depth below ground level.

23.1.1 All Types of Soil

23.1.2 Rocky strata including Boulders

76 23.3 Supplying, assembling, lowering and fixing in vertical position in bore well,

unplasticized PVC medium well casing (CM) pipe of required dia,

conforming to IS: 12818, including required hire and labour charges,

fittings & accessories etc. all complete, for all depths, as per direction of

23.3.3 200 mm nominal size dia Metre 60 1066.05 63963.00

77 23.4 Supplying, assembling, lowering and fixing in vertical position in bore well

unplasticized PVC medium well screen (RMS) pipes with ribs, conforming

to IS: 12818, including hire & labour charges, fittings & accessories etc. all

complete, for all depths, as per direction of Engineer-in-charge.

23.4.3 200 mm nominal size dia Metre 60 1135.80 68148.00

78 23.13 Providing and fixing suitable size threaded mild steel cap or spot welded

plate to the top of bore well housing/ casing pipe, removable as per

requirement, all complete for borewell of:

79 23.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of

pipe assembly of tubewell as per IS:2800 (part I).

80 NS-12 Supply, installation testing & commissioning of submersible pumping set

suitable to operate on 410 volts 3 phase 50 HZ A.C. power supply

including water proof joint free flat submersible cooper cable,of 6 sqmm

including earthing connection motor control panel complete in all respect

as per details given below : (For Borewell)

Discharge 175 LPM.

81 18.18 Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

81.1 18.18.1 15 mm dia nominal bore metre 8.00 338.70 2,709.60

81.2 18.18.2 20mm dia nominal bore metre 2.00 386.40 772.80

82 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) :

18.17.2 32 mm nominal bore each 1.00 581.25 581.25

Total Plumbing work 788,471.70 100,965.40

Horticulture & Landscaping work

83 2.4.1 Supplying and stacking at site dump manure from approved source, cum 450.00 229.95 103,477.50

including carriage upto 5 km lead complete (manure measured in stacks

will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 20 mm

84 2.8 Spreading of sludge, dump manure and/or good earth in required cum 450.00 46.15 20,767.50

thickness as per direction of officer-in-charge (cost of sludge, dump

manure and/ or good earth to be paid separately).

85 2.25 Supplying and stacking of well decayed cattle manure at site including cum 120.00 230.45 27,654.00

royalty and carriage upto 5 k.m. lead complete (Cattle manure measured

in stacks will reduced by 8% for Payment).

86 2.28 Preparation of mounds of various size and shape by available excavated / cum 150.00 401.30 60,195.00

supplied earth in layers not exceeding 20 cm in depth, breaking clods,

watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5

m complete as per direction of Officer-in-charge.

87 2.33 Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to Sqm 5000.00 211.25 1,056,250.00

60mm thickness of existing ground prepared with proper level and

ramming with required tools wooden (Dhurmos) and than rolling the

surface with light roller make the surface smoothen and light, watering with

sprinkler and maintenance for 30 days or more till the grass establish

properly as per direction of officer incharge.

88 6.12 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty each 13500.00 21.55 290,925.00

shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic

Pot & as per direction of the officer-incharge..

89 5.11 Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well each 50.00 1,937.25 96,862.50

developed 12 and above good color fresh and healthy leaves in 40 cm

Cement Pot as per direction of the officer-in-charge.

90 2.57.1 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of each 1000.00 6.20 6,200.00

unsaverieable material’s as per direction of officer in charge (excluding

cost of plant & water)

Cost of plantation per Tree

91 2.57.3 Cost of plantation per Hedge/Ground cover each 13050.00 2.15 28,057.50

92 8.28 Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 each 250.00 225.00 56,250.00

branches and healthy foliage, well formed in cement pots of size 30 cm as

per direction of the officer-in-charge.

93 8.46 Providing and stacking of Murraya exotica of height 45-60 cm. in poly each 3000.00 15.00 45,000.00

bags of size 15 cm as per direction of the officer-in-charge.

Total Horticulture and Landscaping work 1,791,639.00

ELECTRICAL WORKS

1 SUB HEAD-1: WIRING & SUBMAIN

94 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface

/ recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC

copper conductor single core cable etc. as required.

95 1.54 Wiring for group controlled (looped) light point/fan point/exhaust fan point/

call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/ recessed steel

conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

96 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper Metre 30.00 200.00 6,000.00

conductor single core cable in surface/ recessed medium class PVC

conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor

single core cable for loop earthing as required.

97 1.13 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper Metre 20.00 308.00 6,160.00

conductor single core cable in surface/ recessed medium class PVC

conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor

single core cable for loop earthing as required.

98 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FRLS PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit as required.

99 1.25 Supplying and fixing stepped type electronic fan regulator on the existing Each 3.00 342.00 1,026.00

modular plate switch box including connections but excluding modular

plate etc. as required.

100 1.26 Supplying and fixing modular blanking plate on the existing modular plate Each 4.00 32.00 128.00

& switch box excluding modular plate as required.

101 1.31 Supplying and fixing suitable size GI box with modular plate and cover in Each 10.00 401.00 4,010.00

front on surface or in recess, including providing and fixing 3 pin 5/6 amps

modular socket outlet and 5/6 amps modular switch, connection etc. as

102 1.32 Supplying and fixing suitable size GI box with modular plate and cover in Each 8.00 495.00 3,960.00

front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 amps modular socket outlet and 15/16 amps modular switch,

connection etc. as required.

103 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ Each 3.00 65.00 195.00

wooden block including connection etc as required.

104 1.45 Installation, testing and commissioning of ceiling fan,including wiring the Each 10.00 203.00 2,030.00

down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable, including providing and

fixing phenolic laminated sheet cover on the fan box etc. as required.

105 1.50 Installation of exhaust fan in the existing opening, including making good

the damage, connection, testing, commissioning etc. as required.

106 1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan Each 3.00 168.00 504.00

107 2.3 Supply and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper

bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But without

MCB/RCCB/Isolator).

108 2.4 Supplying and fixing following way prewired TP&N MCB distribution board

of steel sheet for 415 volts on surface/ recess complete with loose wire

box, terminal connectors for all incoming and outgoing circuits, duly

prewired with suitable size FR PVC insulated copper conductor up to

terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar,

detachable gland plate, interconnections, powder painted including

earthing etc. as required.(But without MCB/ RCCB/ Isolator)

109 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning

etc. as required.

110 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB Each 4.00 8.00 32.00

complete etc. as required.

111 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the

existing MCB DB complete with connections, testing and commissioning

etc. as required.

112 2.14 Supplying and fixing following rating, double pole, (single phase and

neutral), 240 volts, residual current circuit breaker (RCCB), having a

sensitivity current upto 300 milliamperes in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

113 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all Each 10.00 98.00 980.00

sizes and shapes containing upto two GLS/CFL/LED lamps per fitting,

complete with all accessories including connections etc. as required.

114 NS-13 Supply & erection of 20 watt LED Tube Light rod, 4' long suitable with Each 20.00 822.80 16,456.00

40000 burning hours for rated voltage 220-240V AC working range:- 140-

270 V A'c , 50 Hz +_ 5%, AC supply with aluminium alloy base,, frosted

polycarbonate diffusers with power factor >0.90, Total Harmonic Distortion

(THD) < 20%, system current - 0.085A, system efficiency > 85% , with

operating temp. -10° C to 45° C, Lumen output for LED tube should be >

2000 lumen and overall lumen/watt of luminaire should be greater than

80%, C.R.I. of LED>80% with correlated colour temperature (CCT) of

6500K , minimum burning hour life >40000 hours,LED viewing angle 120

Degree complete in all respect with the entire satisfaction of the Engineer-

in-incharge. Supply of Industrial General Purpose 4' long tube fitting

suitable to house 1x20w LED tube rod 4' long, Polycarbonate housing ,

rated voltage 240 V and Ingress protection IP-20 complete in all respect

with the entire satisfaction of the Engineer-in-incharge.

115 NS-14 Supply of 1200mm ceiling fans complete with double ball bearing, motor, Each 5.00 2,244.00 11,220.00

blades, canopies, capacitor etc. suitable for operation on 230 volts, 50

Hz., 1 phase, AC supply with 5 star rating complete as required. ceiling

fan, including wiring the down rods of standard length (upto 30 cm) with

1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable,

including providing and fixing phenolic laminated sheet cover on the fan

box etc. as required.

116 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including Each 1.00 6,216.00 6,216.00

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 metre long etc. with

charcoal/ coke and salt as required.

117 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for Metre 60.00 44.00 2,640.00

conductor earth electrode, including connection/ termination with GI

thimble etc. as required.

118 5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from Metre 60.00 483.00 28,980.00

earth electrode including connection with G.I. nut, bolt, spring, washer

excavation and re-filling etc. as required.

119 NS-15 SITC of micro processor based air cooled precision type packaged air job 1.00 1,057,943.50 1,057,943.50

conditioning unit (comprising of outdoor & indoor), self contained floor

discharge and top suction type with high technology scroll compressors, fan

section complete with dynamically balanced centrifugal/ plug type EC fan driven

by TEFC squirrel cage induction motor, multirows deep cooling coil of

copper tubes and aluminium fins, remote air cooled condenser with copper

tubes and aluminium fins and thermostatic expansion valve. Enclosure shall be

fabricated out of 1.6mm MS sheets supported on a fabricated steel structure or in

double skin construction. The unit shall be equipped with synthetic fibre filters,

micro- processor based programmable logic controller,CEMS (Computer

Environment Monitoring system) & inbuilt sequential controller, insulated drain

pan, Humidifier & Heaters (dehumidification cycle) for RH control, thermostat

all complete in a unit as per the specifications. The enclosure shall be factory

painted to a smooth finish. The precision unit shall also be complete with

electrical panel comprising of indication lights,Star-delta/DOL starter, over load

protection,necessary relay to be hooked up with fire & smoke detection

system to facilitate auto trip of PAC and copper control wiring.The packaged

units shall be complete with auto sequencing arrangement as required and

shipped out of factory with full refrigerant charge. Each unit shall be provided with

BMS integration card & master card to communicate all relevant data with

BMS. The PAC units shall be suitable for operation on 415+10% volts, 50 Hz

three phase AC power supply. Fan outlet velocity shall not exceed 300

MPM.Quoted price shall be inclusive of MS base frame duly painted with the

black enamel paint for mounting of remote air cooled condensers. Outdoor unit

shall be an over sized unit to account for high ambient of 50°C & indoor temp. of

20±2°C, 50% RH. 2*6 TR Actual Capacity Floor Discharge Type PAC Unit

120 NS-16 SITC of 30 KVA Stand Alone, IGBT Inverter/Rectifier UPS (Transformer- job 1.00 893,195.50 893,195.50

Supply of SMF Batteries (12Volt VRLA, 42 Ah, 32 Numbers to provide 30

Min Backup in Total for Each 30 kva UPS at 0.8PF and ECV=1.7V. Supply

of Local Accessories (like Cabling between UPS and the Battery for each

UPS considering cable Routing ,Battery Interlinks ,Battery Rack etc)

Installation and commissioning of 30 kVA UPS, battery and Accessories

Total of electrical works 163,981.00 1,978,815.00

Solar Grid System

121 NS-17 Design SITC of Grid interactive solar car shed at desired location within kw 170.00 80,315.20 13,653,584.00

the campus. Total capacity to be max. 220 KW of 3 phase solar system

power plant complete with all equipment including poly crystalline modules

and inverter as per direction of EIC.

The solar shed structure shall be made up of column ISMB 225, rafter

ISMB 225, purlin of suitable size, ISMC 150 alond with reinforced

pedestal 400x600mm., structure shall be anchored with 550 mm anchor

bolt. The structure shall be vetted by third party structural consultant and

cost for the same shall be borne by the contractor. The structure of car

parking shed shall be got approved by EIC before starting the execution.

Total of solar works - 13,653,584.00

Poly house system

122 NS-18 Supply, erection and commissioning of one naturally ventilated poly house job 1.00 1,605,229.40 1,605,229.40

for seedling production of minimum dimension as: size 1000 sqm, side

height 4.0 m and central height 5.5 m at RLBCAU campus as per the

design, drawing and technical specification provided by the Engineer-in

charge complete in all respect as per the direction of Engineer-in-

Total Poly house Work - 1,605,229.40

Sports items -

123 NS-19 Basketball Pole set: set 1.00 413,638.50 413,638.50

Providing and fixing movable pole set made from channel frame with

17cm dia round pipe with acrylic board, dunking ring and net with

protective frame cushion complete in all respect as per direction of EIC.

124 NS-20 Badminton Pole set: pair 1.00 52,853.80 52,853.80

Providing and fixing movable pole heavy set with wheels competition with

extra weight system complete in all respect as per direction of EIC.

125 NS-21 Volleyball Pole set: pair 1.00 34,595.20 34,595.20

Providing and fixing movable pole set with PVC weight 200 Kgs system

complete in all respect as per direction of EIC.

126 NS-22 Football goal post set: pair 1.00 68,870.10 68,870.10

Providing and fixing post set made up of 100mm pipe with black support

(width 7.32 Mtr x height 2.44 Mtr) complete in all respect as per direction

Cricket pitch sports ground roller of 1.0 ton capacity heavy complete in all

respect as per direction of EIC.

128 NS-24 Supply and fixing of Signages as per the approved colour, shape and sqft 200.00 381.00 76,200.00

content made up of Aluminium particle board base of minimum thickness

2mm with radium letters including accessories complete in all respect as

per direction of EIC.

Total of sports works - 689,332.00