GE/ALP (8324B) KOLKATA OF 2024-25

Amount

Material and labour for preparation of old treated surfaces of wall by brooming down or steel wire brushing and applying one coat of white washing on wall surface etc complete all as specified and directed.

All as per item No 1 here-in-before but on ceiling.

Material and labour for preparation of old plastered surfaces and applying two coats of white wash on walls complete all as specified and directed.

All as per item No-3 here-in-before but on ceiling.

Material and labour for preparation of old plastered surfaces and applying one coat of acrylic washable distemper on walls complete all as specified and directed.

Material and labour for preparation of old plastered surfaces wall and applying two coats of acrylic washable distemper in wall complete all as specified and directed.

M&L for complete removal of existing treatment, preparatory to distempering, priming plastered and other surfaces with chalk whiting and applying two coats of OBD on wall complete all as specified and directed.

All as per above 7 abovebut on ceiling surfaces .

S & F for 2mm thick wall care putty on wall/ceiling complete all as specified and directed.

M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying one coat of cement base paint etc complete all as specified and directed.

M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying two coats of cement base paint etc all as specificed and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 12 above but two coats of synthetic enamel paint complete all as specified and directed..

M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint on steel surface complete all as specified and directed.

Material and labour for preparation of old painted surfaces on walls of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on wall surface complete all as specified and directed.

M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and applying multi colour texture with plastic paint to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.

M&L for one coat of plastic paint over old texture sruface to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed. (upto 04 storey high of building)

M&L for PCC 1:5:10,type E2 (using 40mm graded crushed stone aggregate) as in filling sunken floor complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4,type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

Supply and applying two coats of high performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. Coving of RCC joints with PCC (1:1.5:3) mixed with Integral water proofing compound. Applying one coat of Water proofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) (upto 12 storey high building).

Supplying and laying for 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening all as shown on drawing (upto 12 storied bldg) and specified and directed.

S&F for factory made solid PVC moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing (upto 12 storied bldg) complete all as specified and directed.

Taking down cement plaster of any discription on brick/stone wall including racking out joints, hacking for key scrubbing down with water, remove dust, debries/rubbish etc removing of rubbish out side MoD land/area complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar (1:6) on brick/concrete sufaces, plastered surface finished even and smooth without using extra cement including complete all as specified and directed.

Material and labour for 10mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on brick/concrete sufaces, plastered surface finished even and smooth without using extra cement including complete all as specified and directed.

M&L for preparation of newly plaster surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and directed.

Preparation of new plaster surface of walls and applying two coats of cement base paint etc over chalk whiting complete all as specified and directed.

M&L for preparation of newly plaster surfaces of ceiling surface and applying three coats white wash on walls complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat exterior acrylic emulsion paint on external surface including nescessary scaffolding complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats exterior acrylic emulsion paint on external surface including nescessary scaffolding complete all as specified and directed.

Supply only integral water proofing compound.

Taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm and resecuring or easing & adjusting and refixing in same opening.

Taking down shutters of any description n.exc. 1 sqm each and resecuring or easing & adjusting and refixing in same opening.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each.

All as per item 39 above but n.exc 1.5 sqm each.

Taking down shutters of any description n exc. 1 sqm each and removing from site.

Taking down shutters of any description exc 1 sqm but n. exc. 2 sqm each and removing from site.

S&F for second class hard wood (SAL), plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F in repair 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round complete all as specified and directed.

S&F in repair 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed..

S&F in repair factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing.

S&F in repair solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F for MS butt hinges, of size 100 mm.

S&F for 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed.

S&F for 100 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed.

S& F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fixing for extruded aluminium alloy handles, 150mm long fabricated type anodised complete all as specified and directed.

Supply and fixing for extruded aluminium alloy handles, 100 mm long fabricated type anodised complete all as specified and directed.

S&F for 3 mm thick figured glass, pin head type & glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Supply & fixing for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. .

S&F for mild steel of grade Fe-290 in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, clamps, hold fasts and similar small articles complete all as specified and directed. .

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S & F for 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 sqm in each pane.

S &F for figured glass 4 mm thick, pin head type & glazing with oil putty in squares n. exc. 0.5 SM in each pane

Supply & fixing for in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

Supply and fixing in repairs 0.56 mm thick plain, aluminium sheeting, alloy 31000 H4 drip and straight flashing.

Supply and fixing in repairs floor door stopper 150mm size of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate

S&F in repairs 300 mm long aluminium allow anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed .

S&F in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section .

M & L for two coats of synthetic enamel painting to wooden surfaces (frame & shutter) over a coat of primer including preparation of wooden surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

All as per item No 66 above but without glazing bars

S&F for steel ventilator with top hung shutter including hinges, steel peg stay, complete

M & L for two coats of synthetic enamel painting to steel surfaces (frame & shutter) over a coat of red oxide primer including preparation of steel surface of any description, not otherwise descri-bed, over 10cm width or girth

Repairing and welding to steel windows includign making functional (easy to opening and closing) and replacing the missing damaged parts complete, (Note : Spare parts required for measured and paid separately under respective items of BOQ)

Repairing and welding to steel box/projection type hinges to steel door/windows shutter, includign making functional (easy to opening and closing) and cutting existing projected hinges etc missing/damaged parts complete,

Repairing and welding to steel door includign making functional (easy to opening and closing) and replacing the missing damaged parts complete, (Note : Spare parts required for measured and paid separately under respective items of BOQ).

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M &L for framed work such as grills to window/ventilation, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

S & F in repair 2nd class soft wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 13.00 Sqcm but n exc 25.00 Sqcm complete all as specified and directed.

S & F in repair 2nd class soft wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3.00 Sqcm but n exc 6.00 Sqcm.

S&F in repair 18/19 mm thick prelaminated particle board,exterior grade, fixed with screws to timber frame work but prelaminated both sides with decorative choice laminations.

Supply and fixing for 18 / 19 mm thick veneered particle board, fix in cupboard shelves, interior grade, solid core, medium density general purposes type with commercial face veneers type ‘BB’

S&F for hasp and staple 100mm, alluminiun anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F as in repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 40mm ( when open)

S&F in repair 40 mm knobs of brass, polished fixed with nut screw &washer bright finished complete all as specified and directed .

S & F for ball catcher with 8 mm dia steel ball and brass body and skirting plate including leting in and fixed complete all as specified and directed.

S&F in repair CP curtain road 20mm dia including bracket and end knobs etc complete all as specified and directed.

Demolition of PCC in ground floor and paving n.exc 15 cm (below or above ground level) including removel of debries to out side MoD land complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8,type D-2 ( using 40mm graded stone aggregate) as in sub base for floors, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 ( using 12.5 mm graded stone aggregate) as in sub base of floor

Dismantling of floors hearth or walls tiling and stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbies of the premises

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 350 x 250x7mm /450x300x7 mm thickness as per manufacture on vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mmthick rendering in CM 1:3 complete all as specified and directed.

Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per item No 90 above here-in-before but fixed on vertical surface as on skirting including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

Material and labour for double charged vitrified coloured tiles (Premium Quality) of size (600x600mm) x 8-9mm thick in floor, etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick screed bed in CM (1 : 6 ) for laying of floor finishes complete all as specified and directed.

All as per item No 92 here-in-before but fixed on vertical surface as on skirting including 10mm thick cement plaster in cement mortar (1:3) complete all as specified and directed.

M&L for plain cement concrete 1:3:6,type C1 (using 20mm graded stone aggregate),as in copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed

Material and labour in repair for granite (of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

M&L in repair for green marble work 18 to 20mm thick ( table rubbed and polished ) in steps, jambs, pillers, window cills,cooking platform and like in cement mortor (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade

M&L in repair for white marble work 18 to 20mm thick ( table rubbed and polished ) in steps, jambs, pillers, window cills,cooking platform and like in cement mortor (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone for gas connection pipe

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

Taking down eaves gutter, rain water pipes (any size and pattern) including all fittings, bends, shoes, swan neck etc including cleaning, refixing and removing to store etc complete all as per specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

S&F in repair PVC (SWR) pipes of 110 mm dia, single socketed fixed laid in floor or tranches.

S&F in repair PVC (SWR) pipes of 75 mm dia, single socket in floor or tranches

S&F in repair PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls

S&F in repair PVC (SWR) pipes of 75 mm dia, single socket fixed to walls

S&F in repair PVC (SWR) junction single tee equal or unequal 110 mm dia. With access door

S&F in repair PVC (SWR) junction single tee equal or unequal 75 mm dia with access door

S&F in repair PVC (SWR) bends of 110 mm dia, any radius

S&F in repair PVC (SWR) bends of 75mm dia, any radius

S&F in repair PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal

S&F for 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F for 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F for 100 mm bore CI bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 75 mm bore CI bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 100 mm bore CI branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F for 100 mm bore CI Cast iron cowls.

Supply and fix in repairs health faucet with 1.5 mtr tube and hook complete all as specified and directed.

Supply and fix in repairs 15 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms/20mm-125gms)

Supply and fix in repairs 15 mm dia pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)

Supply and fix in repairs 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-112gms)

Supply and fixing in repairs 15mm bore piller taps of cast copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe complete all as specified and directed.

Supply and fix in repairs self-closing taps, cast copper alloy, chro-mium plated, screwed for iron pipe 15 mm dia and fixed complete all as specified and directed.

Supply and fix in repairs 15 mm bore bib taps, fancy type and chromoum plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repairs stop valves 15mm dia , cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S& F in repair wall mixtur brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete fixed.

Supply and fix in repairs brass chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe for kitchen sink , WHB , Urinal etc complete all as specified and directed.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450mm

S&F in repairs towel rail 600 mm long of brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats

Supply and fix in repairs 32 / 40 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing for high density polyethylene pipes (HDPE) 40 mm dia (bore) of pressure rating 6 kgf/cm2 laid in trenches

S&F in repair viterious china white wash hand basin includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting & 15 mm PVC connection pipe 450 mm long all as specified and directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed complete all as specified and directed.

S&F in repairs, stainless steel kitchen plate rack of size 3'x3' etc complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc all as specified and directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC (1:5:10), type E-2 and making good to floor including removing rubbish complete all as specified and directed. .

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm and bowl size 410mm x 330mm x 160mm all as specified and directed.

Taking up or down steel tubing & connections including cleaning for relaying of pipe 15 mm bore or removing.

Taking up or down steel tubing & connections including cleaning for relaying of pipe 20 mm bore pipes.

Taking up or down steel tubing & connections including cleaning for relaying of pipe 25 mm bore pipes.

S&F for 15mm bore steel water tubing "medium grade" GI with all fittings & fixed complete to walls & ceilings or laid on floors complete all as specified and directed.

Refixing of old 15mm bore steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) complete all as specified and directed.

S & F for 20mm bore steel water tubing medium grade GI with all fittings & fixed complete to walls & ceilings or laid on floors complete all as specified and directed.

Refixing of old 20mm bore steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) complete all as specified and directed.

S &F for 25mm bore steel water tubing medium grade GI with all fittings & fixed complete to walls & ceilings or laid on floors complete all as specified and directed.

Refixing of old 25mm bore steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) complete all as specified and directed.

supply and fixing in repairs 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

supply and fix in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed.

Supply and fix in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for PVC seat cover for EWC white/black colour complete with MS hinged chromium plated all as specified and directed.

Supply and fix in repairs aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws 100mm.

Demolition of brickwork or stone/boulder masonry, built in cement mortar all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan built in CM 1:4 all as specified and directed.

Supply and fix in repairs aluminium (extruded section body), door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed

S&F for powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including with necessary all fittings complete all as per manufacturer's instructions and all as specified and directed.

Dismantiling of asbestos cement ( Corrugated or semicorrugated, etc ) sheet in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and directed.

Dismantling of timber scantling 40 sq.cm and over in section, in any postion framed work completed all as specified and directed.

Dismantling of timber scantling in fillet, rails, posts, rafters, purlins, etc under 40 sq.cm in section, in any postion framed work completed all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Material and labour for 4mm thick non asbestus reinforcement gypsum (GRG) ceilling tiles of size 595 x 595 mm of approved design fixed with powder coating (powder coating on web bottom only) GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting ceiling tiles of 595 x595 mm with 4 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with grid size 60 x 120 cm complete all as specified and directed.

S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews all as specified and directed.

S&F for MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165 all as specified and directed.

NUPUR CONSTRUCTION (BID ID -3052505)

RADHA ENTERPRISE (BID ID -3053033)

TOTCO (BID ID -3056239)

GOODWILL AND CO. (BID ID -3049124)

SEN ELECTRIC WORKS (BID ID -3053252)

P N GUPTA AND SONS (BID ID -3050533)

M/S AVIJEET INTERNATIONAL (BID ID -3052709)