CA NO GE/ND16/202223 REPAIR/ MAINTENANCE OF CERTAIN E/M FITTINGS/ FIXTURES AND INTERNAL WIRING, CEILING FAN, EXHAUST FAN,GEYSER WITH CONNECTED ITEMS AT SP MARG MD OFFRS ACCN UNDER GE NEW DELHI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch, sockets or piano type switch socket, including modular plates or hylum sheet of suitable size as per site requirement for the following Note: Cutting & chasing, if required, shall be measured/paid under relevant items.

One light/ceiling fan/exhaust fan point controlled by one no., one way switch 5/6 amps.

One light point controlled by two no's, two way switch 5/6 amp

One bell / buzzer point controlled by one bell push

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 2.00 here-in-before but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 amp socket outlet point on independent board complete all as specified and directed.

All as per item No 2.00 here-in-before but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core cable on independent circuit as specified and directed by Engineer in Charge

All as per item No 2.00 here-in-before but point wiring with 1.5 Sqmm single core copper cable and earth continuity wire with 1.5 Sqmm single core cable on 5Amp Socket point independent circuit but below the switch board of light points in the same vertical plane, as specified and directed by Engineer in Charge

All as per item No 2.00 here-in-before but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable on 15Amp Socket point independent circuit but below the switch board of light points in the same vertical plane, as specified and directed by Engineer in Charge

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth on brick walls complete all as specified and directed.

S&F Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and directed.

S&F Modular switch 6 amps 250 V AC two way with ISI mark including 6 amps switch frame complete all as specified and directed.

S&F modular switch 16 A SP one way 240 volts complete all as specified and directed.

S&F modular socket 6 A Multi socket for 2/ 3 pin 240 volts complete all as specified and directed.

S&F modular bell push 6 A with Neon 1 module 240 volts complete all as specified and directed.

S&F modular socket 15 A Multi socket for 2/ 3 pin 240 volts complete all as specified and directed.

S&F switch piano flush button single pole one way 6 amps complete all as specified and directed.

S&F switch piano flush type 15 amps single pole one way complete all as specified and directed.

S&F socket outlet 5/6 amps 2 in 1, 3 pin flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and directed.

S&F switch piano flush button single pole two way 6/15 amps complete all as specified and directed.

S&F bell push, flush type 5 A 240 volts complete all as specified and directed.

S&F electric bell Ding-Dong AC 230 Volt complete all as specified and directed.

S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and directed.

Taking down DB of SPN 8/12 way type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and directed.

S&F sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 12 way with 200 amps rated busbar complete all as specified and directed.

S&F sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt,8 way with 200 amps rated busbar complete all as specified and directed.

Taking down MCB 6-32/40-63 Amps SP/SPN and 40-63 Amps TPN type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and directed.

S&F in replacement of MCB SPN 40 to 63 Amp 240 volt rupture capacity 10 kA, series 'C' complete all as specified and directed.

S&F in replacement of MCB SPN 6 to 32 Amp 240 volt rupture capacity 10 kA, series 'C' complete all as specified and directed.

S&F MCB SP 6 Amp to 32 Amp 240 volts rupture capacity 10 kA, series 'C' complete all as specified and directed.

Taking down Metal clad enclosure with plug and socket 10/20 Amps removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and directed.

S&F sheet Metal enclosure with plug and socket 10 Amp 240 volts with one MCB single pole, complete all as specified and directed.

S&F sheet Metal enclosure with plug and socket 20 Amp 240 volts with one MCB single pole complete all as specified and directed.

S&F in replacement LED batten of 20 Watt 230Volt (size 4 ft), box type complete with LED Tube Light 18 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement of Endura Linear LED batten of 10 W (2 ft.), extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver in AC complete all as specified and directed.

S&F in replacement aesthetically designed Wall mounted decorative wall LED light of 16 W fixture with opal diffuser to give glare free light including material of body floral blown glass metal ,suitable LED lamp of 2x8 W having Lamp base E27 complete all as specified and directed.

Supply & fix in in replacement aesthetically designed Wall mounted decorative mirror LED light of 3.6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 3.6 W having Lamp base E27 complete all as specified and directed.

S&F in replacement of cast aluminium housing, powder coated LED bulkheads light fitting 10watts with frosted diffuser complete with suitable driver complete all as specified and directed.

Supply and fix in replacement Metal clad plug top of capacity 20 Amp, 240 volts complete all as specified and directed.

Supply and fix in replacement Metal clad socket of capacity 20 Amp, 240 volts complete all as specified and directed.

Supply and fix in replacement decorative laminated sheet 3mm thick of size 8'' X 12'' including necessary cutting of sheet for fixing switch / socket complete all as specified and directed.

Supply and fix in replacement decorative laminated sheet 3mm thick of size 8'' X 5'' including necessary cutting of sheet for fixing switch / socket complete all as specified and directed.

Supply and fix in replacement only decorative laminated sheet 3mm thick of size 7'' X 4'' including necessary cutting of sheet for fixing switch / socket complete all as specified and directed.

Supply and fix in replacement decorative laminated T cover sheet 3mm thick of size 2/3 inch dia complete all as specified and directed.

S&F in replacement STEP type electronic fan regulator flush type 230 volts complete all as specified and directed.

S&F electronic fan regulator modular type 100 Watt step type Double Modular as per existing complete all as specified and directed.

Supply and fix in replacement fan capacitor of the following capacity :-

Supply and fix in replacement non stepped type fan regulator ISI Mark complete all as specified and directed.

Supply and fix in replacement non metallic rigid PVC casing caping, ISI Mark complete all as specified and directed.

Taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to workshop and carrying out for rewinding, transportation to site, reinstallation and testing complete all as specified and directed.

M&L for Rewinding of ceiling fan 1200/1400/1600 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing wherever required complete all as specified and directed.

All as per ser item No 49.00 here-in-before but exhaust fan 230/300 mm sweep

S&F ceiling fan Ball bearing of suitable size & model (as per sample)

M&L for replacing 'U' clamps with rubber reel, bolts, nuts, washers and safety pin ceiling fan of any size complete all as specified and directed.

M&L for Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white synthetic enamel paint complete all as specified and directed.

S&F of Canopy of Ceiling fans of 1200/1400/1600 mm swipe size heavy duty duly painted with one coat of white synthetic enamel paint complete all as specified and directed.

M&L for spray painting (white colour) with synthetic enamel paint to Ceiling fans/Exhaust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No. with black synthetic enamel paint complete all as specified and directed.

Supply & fixing flat ceiling fan blade of aluminium, 1mm thickness suitable for 1200mm sweep ceiling fan, 12-15 degree tilted, having 3 Nos in each set complete all as specified and directed.

Supply & fixing flat exhaust fan blade of aluminium, 1mm thickness suitable for 230/250/300mm sweep exhaust fan, 12-15 degree tilted, having 3 no. in each set complete all as specified and directed.

S&F Frame of 230/250/300 mm metallic exhaust fan including taking down of old frame complete all as specified and directed.

Supply & fixing flat ventilation fan blade of PVC, 1mm thickness suitable for 230/250/300mm sweep exhaust fan,12-15 degree tilted, having 3/4 in each set complete all as specified and directed.

S&F ventilation fan motor of size 230/250/300 including taking down of old ventilation fan motor complete all as specified and directed.

S&F PVC Frame of 230/250/300 mm ventilation fan including taking down of old frame complete all as specified and directed.

Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc. complete all as specified and directed.

M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Litres capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed.

M&L for heating element of 2.0 KW (Circular) as required at site including rubber washers (ISI marked) etc complete all as specified and directed (As per sample).

M&L for heating element of 2.0 KW (triangular) as required at site including rubber washers (ISI marked) etc complete all as specified and directed

S&F storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure complete all as specified and directed.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure complete all as specified and directed.

M&L for replacement of insulating material (Glass wool) for 25/ 50 litre capacity Geysers complete all as specified and directed.

S&F base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed.

S&F base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed.

M&L chromium plated copper connection pipe 600/1000 mm long with two brass adopters washers and connecting up complete all as specified and directed.

M&L safety nut for high pressure release (As per sample).

S&F top cover for geysers of 25/50 ltrs capacity of any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) complete

S&F bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and directed.

S&F outer cover for geyser made out of MS sheet suitable for 50 ltrs capacity geyser vertical/horizontal type complete all as specified and directed.

S&F of outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horizontal type complete all as specified and directed.

S&F thermostat (ISI Marked) for 25/50 Litres capacity Geyser.

S&F indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample)

Supply and fix mild steel hole fastener 10mm dia, 100mm long including nut and washer complete all as specified and directed.

Supply only lamp holder, PVC /polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply only LED Bulb inverter type, 15 watt, suitable for fitting in pendant holder complete all as specified and directed.

Supply only PVC gang box with Cover plate 2/3 module suitable for fitting one 5 A switch/socket complete all as specified and directed.

Supply only PVC gang box with cover four module suitable for fitting one15A switch and one socket complete all as specified and directed.

Supply only PVC gang box with cover 6 module suitable for fitting switch and socket complete all as specified and directed.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 1.5 sqmm 1100 volt grade complete.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 2.5 sqmm 1100 volt grade complete.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 4.0 sqmm 1100 volt grade complete.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 6.0 sqmm 1100 volt grade complete.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 10 sqmm 1100 volt grade complete.

Supply only stranded copper Cable(thimbal) lugx of size 10.0 sqmm.

Supply only stranded copper Cable(thimbal) lugx of size 6.0 sqmm.

Supply only modular switch 6 amps 250 V ACone way with ISI mark complete all as specified and directed.

Supply only modular switch 16 A SP one way 240 volts complete all as specified and directed.

Supply only modular socket 6 A Multi socket for 2/ 3 pin 240 volts complete all as specified and directed.

Supply only modular socket 15 A Multi socket for 2/ 3 pin 240 volts complete all as specified and directed.

Supply only MCB SP 10 KA,230 Volts 6-32 Amps capacity

Supply only MCB SPN 10 KA,230 Volts 40-63 Amps capacity

Supply only MCB TPN 415 Volts 100 Amps capacity

M&L in replacement building security LED 18 watt fitting complete with accessories made of aluminium housing having minimum system efficiency 100 lm/watt operating at full load at AC supply including house service bracket complete all as specified and directed.

M&L for taking down ceiling fan & taking out old unsv ceiling fan motor & replacement with new copper winding motor one by fixing nut bolts complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arrangement to hanging of fan to ceiling with proper hook nut bolts with approved make all as specified & directed all as specified and as directed by Engr-in-Charge

S & F Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with approved make

Supply and fix Rigid non-metallic PVC conduit 20 mm dia including of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for lan/ telephone circuits. Note : Work includes cutting of chases on wall and making good disturbed surfaces.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed.

NAVDURGA BUILDERS

NEERU ELECTRICALS

SANJEEV ENTERPRISES

Haryana EngineerService

S.R. Constructions

J B Electricals

M/S ANIL KUMAR

Grid Infratech Pvt Ltd