REPAIR/MAINTENANCE INCLUDING PERIODICAL SERVICES TO BOUNDARY WALL, FENCING, GATE, PATHWAYS, STORM WATER DRAIN, HARD STANDING, OPEN COURTYARD, RAIN WATER HARVESTING SYSTEM AND MISC INFRA OF AOC CENTRE UNDER AGE B/R (SOUTH) NO II OF GE (SOUTH) SECBAD

Amount

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil complete all as specified and as directed..

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing the excavated soil to a distance exc 250.0 m and n.exc 500 .0m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Demolition of Brick or stone masonry built in cement mortar complete all as specified and as directed.

M/L brick work with Fly Ash bricks built in CM 1:4 straight or curved exceeding 6m mean radius complete all as specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and as directed.

All as per item above, but except stone complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble uncoursed or brought upto course in CM 1:4 complete all as specified and as directed.

S&F in repairs galvanised two strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including scuring tying at crossing with and provision of galvanisd mild steel wire taples or steel pins complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for drain, manhole cover, septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed. Note:- Reinforcement will be measured and paid seperatel

S&F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of walls, man holes, septic tank, filter bed etc incl removing of debrie complete all as specified and as directed.

Supply only intergral water proofing compound complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 with WPC on fair faces of brick/concrete finished even and fair without using extra cement complete all as specified and as directed. (WPC will be meausred and paid separately)

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground incl barbed wire complete all as specified and as directed .

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard or dence soil complete all as specified and as directed.

M&L for cement concrete in foundation filling and mass concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and as directed.

S&F for posts and struts in fencing including embedding in concrete and screwing etc. including securing bolts,cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0. complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, of any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.all as specified and directed.

M&L for 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm longcomplete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clipscomplete all as specified and as directed.

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as directed.

M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub basecomplete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in base/flooring nd finishing surface even and smooth without using extra cementcomplete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

M&L for PCC type B1 1:2:4 (20mm graded aggregate) as in copings, surface channel, plinth courses, bed plates, kerbs incl necessary formwork etc complete all as specified and as directed.

M/L rendering 15mm thick in M 1:4 on fair faces of brick or concrete surfaces finished even and fair completecomplete all as specified and as directed.

M&L for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and as directed.

M&L for providing Pre-cast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in 40mm thick jallies and louvers etc of design & pattern as directed with plain faces, including all necessary form work etc and reinforced at 100 mm c/c both ways with and including 4mm dia MS wire and set in cement mortar 1:4 , incl taking down in batch repairs complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for.complete all as specified and as directed.

Dismantling structural steel work incl doors, gates but exe framed truss etc complete all as specified and as directed.

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars(for windows), barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work cnforming to Fe 290. Gde E-165 complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete Fe-290(Gde E-165) complete all as specified and as directed.

M&L for two coats of cement base paint over a coat of primer on new surfaces of wall including preperation complete all as specified and as directed.

M&L for three coats of white wash including preparation of new plasted wall complete all as specified and as directed.

M&L for Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L for Preparation of plastered or unplastered old decorated surfaces and applying one coat of colour wash on walls. tecomplete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer including filling of cracks, holes and including leveling the surface wherever undulation found with cement putty etc complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M & L preparation of old surfaces of walls and applying one coat of anti fungal wether proof paint (Appex ultima or equivalent) including filling of cracks, holes and including leveling the surface wherever undulation found with cement putty etc complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

KIRAN CONSTRUCTIONS

harshraj and co

ATUL ENTERPRISES

Vara Enterprises

GUTHIKONDA BROTHERS

BEEGEE DESIGN SYSTEMS

PARDEEP AND CO