REPAIR / REPLACEMENT TO INTERNAL ELECTRIFICATION INCLUDING APPLIANCES / FITTING AND FIXTURES AND MCBS, DBS, SWITCH/SOCKETS AND CONNECTED WORKS AT HQTC BANGALORE

Amount

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets complete as directed and removing retrieved materials and making good the disturbed surface, complete all as specified and directed

Taking down existing light fittings of any description from wall/ ceiling including keeping in safe custody by making good the disturbed surfaces of walls, complete all as specified and directed.

Point wiring complete with 1100volts grade, single core, PVC insulated FRLS cable multi-stranded copper conductor of size 1.5 sqmm nominal area, concealed type drawn through and including PVC Conduit of suitable size, with all necessary fittings and accessories fixed in walls/ ceiling with one run neutral and one run of single core cable of same description above but green colour in continous earthing wire connected to common earth dolly including PVC junction / mounting boxes on / in the wall / ceiling for piano switches/ switch socket combination/ fan regulators etc and GI junction box duly covered with 3mm thick hylam sheet for the One light/ fan point controlled by one single pole 5 Amps switch, complete all as specified and directed.

All as per Srl item No 03 here in before but for one switch socket out let point 5 Amps on independent board

All as per Srl item No 03 here in before but for one switch socket out let point 5 Amps on same board with other switches

All as per Srl item No 03 here in before but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size

All as per Srl item No 03 here in before but for one bell point controlled by one single pole 5 Amps bell push

All as per item No 03 here in before but for PVC insulated FRLS copper conductor of size 2.5 sqmm for switch socket multipurpose 15 Amps including provision of 1.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

All as per item No 03 here in before but for PVC insulated FRLS copper conductor of size 4.0 sqmm for switch socket multipurpose 15 Amps including provision of 2.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

Point wiring complete with 1100volts grade, single core, PVC insulated FRLS cable multi-stranded copper conductor of size 1.5 sqmm nominal area, drawn through and including PVC Casing caping of suitable size, with all necessary fittings and accessories fixed on walls/ ceiling with one run neutral and one run of single core cable of same description above but green colour in continous earthing wire connected to common earth dolly including PVC junction / mounting boxes on / in the wall / ceiling for piano switches/ switch socket combination/ fan regulators etc and GI junction box duly covered with 3mm thick hylam sheet for the One light/ fan point controlled by one single pole 5 Amps switch, complete all as specified and directed.

All as per Srl item No 10 here in before but forne switch socket out let point 5 Amps on independent board

All as per Srl item No 10 here in before but for one switch socket out let point 5 Amps on same board with other switches

All as per Srl item No 10 here in before but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size

All as per Srl item No 10 here in before but for one bell point controlled by one single pole 5 Amps bell push

All as per item No 10 here in before but for PVC insulated FRLS copper conductor of size 2.5 sqmm for switch socket multipurpose 15 Amps including provision of 1.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

All as per item No 10 here in before but for PVC insulated FRLS copper conductor of size 4.0 sqmm for switch socket multipurpose 15 Amps including provision of 2.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

Modularswitch , 1 Module single pole one way 10 Amps, complete all as specified and directed.

Modularswitch , 1 Module single pole one way 16 Amps, complete all as specified and directed.

Modularsocket , 2 Module 6 Amps 240 volts Ac 2/3 pin combined suitable for inserting 2 pin 5 Amps/ 3 pin 5 Amps plug top, complete all as specified and directed.

Modular socket , 2 Module 6/16 Amps 240 volts Ac 6 pin combined suitable for inserting 3 pin 6/16 Amps plug top, complete all as specified and directed.

Modular type fan regulator 120W 2 Module type heavy duty, complete all as specified and directed.

PVC ceiling rose 65 x 50 mm surface type with 3 terminals, complete all as specified and directed.

Piano type switch single pole 5 Amps one way 230 volts, complete all as specified and directed.

Switch socket combination outlet 5pin multi purpose 5 Amps flush type, complete all as specified and directed.

Switch socket combination outlet 6 pin 5&15 amps multi purpose flush type universal pattern 230 v, complete all as specified and directed.

Lamp holder, insulated body with back plate for batten fittings including 09 watt LED bulb, complete all as specified and directed.

Socket out let 3 Pin , 15 Amps flush type, complete all as specified and directed.

Socket out let 2 in 1, 3 Pin , 5 and 15 Amps flush type, complete all as specified and directed.

Socket out let 2 in 1, 3 Pin , 5 Amps flush type, complete all as specified and directed.

Socket out let 3 Pin , 5 Amps flush type, complete all as specified and directed.

LED batten luminaire surface mounted, 4 feet long system wattage of 22 Watts , 2500 Lumens, System efficacy >110 lm/W, CCT 6500k , CRI > 80 , Wall / surface mounted , IP 20 aluminium extrusion housing with and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting, complete all as specified and directed. Make :- Bajaj cat Part BCLSB 20 WH or equivalent in (Make- Havells delite Plus LHEXBTP7IN1S022 / PHILIPS cat no BN021 LED 25S 6500 PSU GR S1 Wipro/Osram/GE)

Batten luminaire surface mounted, 2 feet long system wattage of 10 Watts , Efficacy > 100/W, CCT 6500k , CRI > 80 , Wall / surface mounted , IP 20 aluminium/PVC extrusion housing with and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting, complete all as specified and directed. Make : Bajaj cat part BCLSB 10 WH or equivalent (Make- Havells L.FIXT ELITE Cat ; LHEXBXPNIN1W010/ PHILIPS cat no BN021 LED 10S 6500 PSU GR S1 orWipro/Bajaj/Osram/GE)

LED surface mounted Luminaire system wattage of 12 watts , IP 56, Lumen output 1000 lm/10w , system efficency > 80 lm/ W, CCT 6500K , opuaqe polycarbonate housing moulded high quality diffuser with and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting, complete all as specified and directed. Make Bajaj cat part BGSLO SLEEK SURFACE 12 WH RD or equivalent (Make- Havells Cat No LHEXCFP7PN5W010/ Philips of Cat No. SM250C LED12S or equivalent in Wipro/Bajaj/Osram/GE)

LED surface mounted bulkhead Luminaire suitable for wattage of 10 watts , IP 66, system efficency > 70 lm/ W, color temp 6500K , with high pressure die cast aluminium housing and polycarbonate cover with and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire to fitting fixed complete Make Bajaj Cat Part BIBWP 10W LED or equivalent (Make-Philips of Catalogue No. WT202W LED6S CW PSU S2 PC or equivalent in Wipro/Bajaj/Osram/GE/Havells)

20W High efficient LED Security light fitting with pressure die cast Aluminum housing, IP66, Lumen output 2000 system efficiency 100, colout temp 5700 k ,CRI 70 , including provision of 40MM dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed, complete as specified and directed. (Make : Bajaj cat part No BRLEP 20W LED V2/Philips cat BRP 022 LED 20 CW MR S1 PSU GR or equivalent in Wipro/Crompton/GE)

LED recess mounted Luminaire system wattage of 12 watts , IP 20, Lumen output 1200 lm/12w , system efficency > 80 lm/ W, CCT 6500K , opuaqe polycarbonate housing moulded high quality diffuser with and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed, complete all as specified and directed. Make- Bajaj of Catalogue No. BGSLO SLEEK 12W WH RD or equivalent in Wipro/Philips/GM

Recessed 36W LED ceiling fitting with soft-light and glare free symmetrical illumination, suitable for 600x600mm modular grid ceiling fitting including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed, complete all as specified and directed. Make-BAJAJ Cat :BZRSQL 36W GZ1 CW or equivalent make in Philips/Wipro

Industrial box type Recessed luminaires (20W range) with efficient optics ensuring perfectly uniform illumination, optimised and unparalleled light distribution including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed, complete all as specified and directed. Make-Bajaj Cat :BRTX 2-20W LED 8F WH or equivalent make in Philips/Wipro

Square shaped surface mounted 18W LED flat panel with PDC aluminium housing and PMMA diffuser including taking down old unservecable light fitting, complete all as specified and directed. Make: Bajaj Cat No. BZSSQL 18W WH or equivalent makes Philips/ Wipro.

6 watt LED focus light fitting Recessed mounted deep recessed adjustable downlight for good-quality to enhance the display of retail showroom accent lighting, complete all as specified and directed. Make: Bajaj Cat No. BRDCSL 6W WW or equivalent makes Philips/ Wipro.

PVC insulated multistranded copper flexible cable of size 1.5 Sq mm 2 core, complete all as specified and directed Make : Anchor/Polycab/Havells/Finolex

Sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 1.5 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly including taking down of existing unserviceable cable, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 4sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 2.5sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly including taking down of existing unserviceable cable, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 6 sqmm in and including non-metallic rigid PVC conduit with all accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 4sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dollyincluding taking down of existing unserviceable cable, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including non-metallic rigid PVC conduit with all accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 6sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dollyincluding taking down of existing unserviceable cable, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

25W non-integral flexible LED striplight of length not less than 5Mtr spool with IP 20 protection, Range 220 V - 240 V, 50Hz including taking down of existing unserviceable cable, complete all as specified and directed. Make :Bajaj Cat : 25W PROFESSIONAL LED STRIP IP65 WW or equivalent in Philips/Havells

25W LED flexible strip for converting 220 V power supply to suitable Amp including taking down of existing unserviceable cable, complete all as specified and directed. . Make :Bajaj Cat : 112514 25W LED Strip Driver IP20 WW or equivalent in Philips/Havells

12W LED track light fitting Spot light luminiare suitable for 1 phase track with powder coated alluminium body, 240V 50Hz including taking down of existing unserviceable cable, complete all as specified and directed. Make : Bajaj Cat No 112358 or equivalent make in Philips/CG

Single phase 1 mtr track for fixing track lights with wiring if necessary and fixture including taking down of existing unserviceable cable, complete all as specified and directed. Make : Bajaj Cat : 169120 or equivalent make in Philips/CG

30 Watts LED Floodlight Luminaire with high pressure die cast housing and IP65 Protection including taking down of existing unserviceable cable, complete all as specified and directed. Make :112716 BJFL 30W LE or equivalent make in Phlips/Wipro

6 Watts LED bush light luminarie, IP 67 protection including taking down of existing unserviceable cable, complete all as specified and directed. Make : Wipro Cat No LF05-450-024-27XX or equivalent make in Phlips/Havells

LED tube 1200mm 20W865 T8 IND I-2100lm (glass Body), efficiency > 110, CCT 6500k , CRI > 80 including taking down of existing unserviceable cable, complete all as specified and directed. . Make-Philips/CG/Wipro

LED bulb 9 watt suitable for threded type/ pin type holder including taking down of existing unserviceable cable, complete all as specified and directed. . Make-Philips or equivalent make in CG/Wipro/Havells

Vertical TPN MCB DB 4way double door, suitable for housing 4+12 modules with insulated bus bar assembly with flexible connecting link including taking down of existing unserviceable cable, complete all as specified and directed. Make : LEGRAND/L&T/Siemens)

Sheet metal enclosure for DB's double door 08 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V including taking down of existing unserviceable cable, complete all as specified and directed.

Sheet metal enclosure for DB's double door 12 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V including taking down of existing unserviceable cable, complete all as specified and directed.

MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA including taking down of existing unserviceable cable, complete all as specified and directed.

MCB SPN, 40 Amps, 240/415 V, B- series with breaking capacity of 10KA including taking down of existing unserviceable cable, complete all as specified and directed.

MCB SP, 6-40 Amps, 240V, B- series with breaking capacity of 10KA including taking down of existing unserviceable cable, complete all as specified and directed. Cat Part No - 81108 to 811015 of Make Indo Asian or equvalent of Havells/ Legrand/ C&S

Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with single pole MCB 20 Amps 240 Volts AC including taking down of existing unserviceable cable, complete all as specified and directed.

Taking down old aluminium/ copper strip from existing location making good disturbed surfaces of walls, floor to match with existing specification, complete and all as specified and directed.

Copper strip 32 x 6mm buried in ground ,Run on wall with shaddle, complete all as specified and directed.

Single pointed air termination Copper rod, 12 mm dia, 300 mm long including taking down the existing air termination, complete all as specified and directed.

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and with screwed 3 Nos 8mm dia 25mm long hex head screw including takingdown the old termination from siite, complete all as specified and directed

High Density Polymer (HDPE) earth pit chamber of dimension 308mm x 308mm x 214mm with locking cover & seal by replacing with existing unserviceable chamber for earth pits, complete all as specified and directed.

Testing of Advanced Protector active Lightning Arrester LAP-BX-125 of LIVA make, working on strike voltage test between the values of positive & negative, Early streamer warning time test as per IEC 61083-1, IEC 60060-1, NFC 17-102, Lightning rod strike voltage heavy current strike test with 115 kA current strikes at TS EN 50164-1 standards at SIGMA lab and should have submit company test certificate by the OEM.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for building earthing etc,as required of 4mm GI wire and removing retrived materials and making good the distrurbed surface of wall, floor ceiling etc., complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60x60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including using of 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised steel as shown in electrical plate No. 3, connected to earthing test point, all as specified & indicated, including testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric weight hot less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore, medium grade wire mesh and lugs, GI protection pipe of 15mm bore medium grade upto 7.50 mtr long test point etc., complete all as specified and directed.

Taking down carefully ceiling fan / exhaust fan / cabin fan / wall mounted fan by disconnecting electric connection for repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, and connecting, complete all as specified and directed. Note:- (i) Servicing and Repairing such as rewinding, replacement of defective spare part, connecting wire etc will be measured & paid separately as supply & fix in repair (ii) Over hauling and painting will be measured & paid separately.

Dismantling the ceiling fans complete of any size/any make and carrying out servicing the fans including greasing/ oiling/ repairs and replacing the gutter pin and checking of safety pin , replacing unserviceable/rusted nut bolts, split pins rubber wheel etc.re-connecting the fans to ceiling rose/connector complete with two core copper conductor cable of size 1 Sqmm from fan to ceiling rose/connector, complete all as specified and directed.

Rewinding of ceiling fan of any sweep and make by dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing, complete all as specified and directed.

Bush suitable for ceiling fan of size 1200/1400 mm sweep, fixed as in repairs, complete all as specified and directed.

Ball bearing suitable for ceiling fan of size 1200/1400 mm sweep, fixed as in repairs, complete all as specified and directed.

Replacement of old/ unserviceable capacitors 2.5 MFD for the fans in position, complete all as specified and directed.

All as per Srl item No 74 here in before but 4MFD

Down rods 450 mm long fabricate out of 15 mm dia GI tubing light grade duly threaded for check nut and drilled hole for split pin and U clamp bolts, nuts, washers, rubber split pin check nut etc suitable for ceiling fan 1200 to 1400 mm sweep, fixed as in repairs, complete all as specified and directed.

Down rods 1500 mm long fabricate out of 15 mm dia GI tubing light grade duly threaded for check nut and drilled hole for split pin and U clamp bolts, nuts, washers, rubber split pin check nut etc suitable for ceiling fan 1200 to 1400 mm sweep, fixed as in repairs, complete all as specified and directed.

Replacement of fan clamp suitable for fixing down rod for ceiling fan including rubber reel ,bolt ,nut ,washers,split pin, complete all as specified and directed

Fan hook on RCC ceiling made of mild steel back plate , hook and mounting with two Nos expandable anchor bolts and tightening nuts including making necessary holes, fixed as in repairs, complete all as specified and directed

Canopies for ceiling fan 1200/1400 mm sweep, complete all as specified and directed.

Spray painting to ceiling fans of size 1200/1400 mm sweep complete with one coat of synthetic enamel paint of approved colour after cleaning and making good the surface and numbering with black paint, complete all as specified and directed.

Rewinding of exhaust fan motor with super enamelled copper winding of same gauge and weight after cutting and removing the existing burnt windings including varnishing, heating and providing fresh insulating materials, cleaning, oiling, greasing and tightening all the bolts, nuts, washer, screws, camps for the 225mm sweep to 300mm sweep, complete all as specified and directed.

All as per Srl Item No 82 here in before but for 375/380mm sweep to 450mm sweep.

Bush suitable for exhaust fans of any make/size, fixed as in repairs, complete all as specified and directed.

Ball bearing suitable for exhaust fan of any size and make, fixed as in repairs, complete all as specified and directed.

Replacing the unserviceable mounting brackets, nuts, bolts, rubber set bush / pad suitable for any size of exhaust fan, complete all as specified and directed.

Spray painting to Exhaust fans of any size and sweep complete with two coat of synthetic enamel paint of approved colour after cleaning and making good the surface and numbering with black paint, complete all as specified and directed.

Taking down exhaust fan of any size/make from wall, dismantling blades and cleaning the fan, refixing the same duly tightining the blades and replacing unserviceable bolts/nuts and making good the disturbed surface of wall, complete all as specified and directed.

Exhaust fan blades of metal body up to 300 mm sweep size, fixed as in repairs, complete all as specified and directed.

All as per Srl Item No 89 here in before but for more than 300mm sweep

Exhaust fan blades of PVC body of any size, fixed as in repairs, complete all as specified and directed.

Exhaust fan louvers of any size to be fixed in replacement/taking down of unserviceable one from any height of building, complete all as specified and directed.

Rewinding of 400mm sweep wall mounting fan motor with super enamelled copper winding wire of same guage and weight of existing winding including cutting and removing the exiting winding, cleaning of rotor/ starter, varnishing, heating and provision of fresh insulating material, complete all as specified and directed.

Taking down wall mounting fan of any size/make/material from wall, dismantling blades and cleaning the fan, refixing the same duly tightining the blades and replacing unserviceable bolts/nuts and making good the disturbed surface of wall, complete all as specified and directed.

M/S J S PRAKASAM

RAMSON TRADERS

PATEL CONSTRUCTION

RRK PROJECTS

RAINBOW ELECTRICALS