REPAIR TO WOODEN, ALUMINIUM, JOINERY, PARTIONS, WALL PANELLING, CEILING AND ALLIED WK AT UPPER LEIMAKHONG

Amount

Schedule 'A'

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed.

S&F in repairs existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper complete all as specifeid and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repair 3mm thick, figured sheet glass pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Ditto all as per Item No-8.00 here-in-above but exceeding 0.5 Sqm in each pane.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames or steel frame, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminum beading and gaskit to aluminum frame work complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F for Anodised aluminium frame for doors,windows, ventilators and partation with one or more rebates including joining cleat for fixing etc , Add extra for Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L for Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron) sliding window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc including all fittings complete all as specified and directed.

M&L for Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron)sliding window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc including all fittings complete all as specified and directed.

Supply and fixed in repair aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair Mortice lock , brass body 4 levers, vertical type, size 100 mm complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified.

Fixing with running welding in repair of ms hinges, helical door springs, rolling shutter spare parts heavy MS garrage doors etc. thickness of material n. exc. 6mm complete all as specified and as directed.

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd Class H.W Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) complete all as specified and as directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair 150mm long Aluminium handles, fabricated type, anodised complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F in repair 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fixing in repair double action floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as complete all as specified and directed..

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type hook bolt and washer or self tapping screws in roof, wall etc.with grade of zinc coating 275 complete all as specified.

Ditto all as per Sl item No. 35.00 here-in-above but except sheet any thickness (NOTE: Seviceable sheet any thickness obtained from dismantling under Sl item No 32.00 here-in-above shall be reused under the item)

S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.(Note:- Qty incl ventilator weight)

S&F structural steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

S & F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed.

S&F structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.

Erection fixing only structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. (NOTE: Seviceable structural steel obtained from dismantling under Sl item No 38.00 here-in-above shall be reused under the item)

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.

S&F in repair 18/19mm thick Perforated particle board / tiles for insula-tion and accoustic purposes,60x60 cm in size, fixed with nails to timber frame workorwith staples on snap grid in ceiling complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB fixed with nails or screws to timber frame work complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed.

Ditto but in fillets in framed work under 40 sq.cm in section complete all as specified and directed.

M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed.

Ditto all as per Sl item No. 50.00 here-in-above but except timber scantling (NOTE: Seviceable timber scantling obtained from dismantling under Sl item No 48.00 here-in-above shall be reused under the item)

S&F 2nd class hard wood plain fillets, square, rectangular in section, sectional area exe 3 sqcm & n. exe 6 sqcm clean sawn, secured with nails or brads complete all as specified and directed.

Ditto all as per srl item No 52 here-in-before but except battens of sectional area exc 13 & n.exc 25 sqcm complete all as specified and directed.

M&L for Preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed.

M & L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and even without extra using cement complete all as specified and directed.(Note:- Using Dimapur sand)

M&L for preparation of surfaces plastered or unplastered new surface on wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors decorative doom holders fixed to wall with screwcomplete all as specified and directed.

M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminum beading and gaskit to aluminum frame work complete all as specified and directed.

S & F 30 mm wide continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F for Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Fixing with welding only in repairs n. exc 2.5cm in length & n. exc 6mm thickness of metal existing sliding door bolt / tower bolt / handle of any size & material by welding M/C at any location complete all as specified and directed by Engineer-in-Charge.

Fixing with running welding in repair of ms hinges, helical door springs, rolling shutter spare parts heavy MS garrage doors etc. thickness of material n. exc. 6mm complete all as specified and as directed.

Manipur Steel Industries(INDIA)

M/s Nongmaithem Construction