Construction of New Building of S.S. Memorial College Ranchi under Ranchi University, Ranchi

J. S. B. C. C. L.

1 . Providing and fixing Roller Blind as per approved material as per following detailed specifications including all fittings and labour, complete job. (Approved Brand - Roller Blind/ D'Décor/ Asian Paints)

Control unit: The Control unit is made of high strength reinforced plastic. The clutch is of wrap spring design. High carbon steel springs are provided to transmit motion from driving to driven members of clutch mechanism. Clutch is operated directionally by the use of endless beaded chain. Clutch never needs any adjustment. Idler: Idler is of high strength reinforced plastic, consisting of a centre shaft. The idler is mounted on the bracket by using a plastic lock. The metal sleeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and long wearing operation. Head rail: It is an aluminum extruded rail Powder coated in white. Control unit and Idler are mounted on the Head rail with powder coated M.S. brackets. Roller tube: It is an anodized extruded tube of high strength alloy. Control unit and Idler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail: It is an aluminum extruded rail with a groove for fixing the fabric and power coated in white. It is fixed to the bottom of the fabric and the purpose of it is, to keep the fabric in tension and straight. The fabric is fitted to the tube using plastic insert. The end caps of the tube are ABS. Operating chain: This is made of 4.5mm plastic beads molded on 2.2mm thick polyester chord. The pitch of the beads is 6mm. The chain drives the sprockets of the control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation.

Fixing brackets & clamps: These are used to fix the blind to the wall or ceiling. 'L' bracket is made of mild steel and zinc plated. The clamp is made up of spring steel of thickness O.7mm and zinc plated. Roller tube: It is Aluminum alloy Extruded grooved tube, which is anodized. Size‐ 32mm‐ O.D.; weight ‐ 0.27 kg/mtr Size‐ 38mm‐ O.D.; weight ‐ 0.38 kg/mtr Size‐ 50mm‐ O.D.; weight ‐ 0.60 kg/mtr Alloy & temp‐ 6063‐T6 Fabric is fitted on the tube with double sided tape. Bottom Rail: Extruded Aluminum grooved section‐ powder coated in white Size: 21mm O.D. Alloy‐HE9WP Weight‐0.28 Kg/mtr. Fabric is fitted to the bottom rail with plastic insert. Bottom rail end cap‐ made of ABS. Fabric: Constuction 3 Ply PVC + 1 Ply Fiber Glass Blackout Polyester, Fabric Thickness 0.36 Mm, Fabric Weight +5% 520 GSM, Fabric Width 244 Cms, Tearing Strength 64 N Warp, 57 N Weft, Tensile Strength 260 ON/ 5 Cm‐Warp 212 ON/ 5 Cm‐Weft, Fire Resistance NFPA 701 AATCC 16‐2003 4.5, Environmental Certification Green Guard Certified, Other Properties Anti Fungal & Anti BActerial Fabric. Slighcolour aberration may exist and it is no reason for claims. Technical properties are based on average data and may exist deviation technical properties are used for reference and are not contractual. 58.064822500000005 SQ.M

2 . Design, Supplying & Fixing of Manufacture, Supply, of polycarbonate multi-layered, Multicell Connectible modular panel system, a complete assembly of coextruded UV protected polycarbonate panels incorporated into a complete system. Standing seam polycarbonate panel system of minimum 16mm thick (Min.) Panels shall be with grip lock double tooth locking mechanism with interlocking connectible connectors running lengthwise at both sides of the panel. Panels shall be fixed on Purlins of MS structure (will be paid Separately) with 3 numbers of self-drilling screws and trapezoidal SS fasteners. The Trapezoidal SS fasteners shall have a base coverage of minimum 40mm and top holding of 80mm across length on polycarbonate panel to ensure a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005.

Color: As per Approval. Approved Make: Flux/ DPI Daylighting over false ms structure with 72 mm x 72 mm / 60 mm x 60 mm square hollow pipe , 100mm x 100mm post with all fitting fixtures like plates, bolts, complete. 81.29 SQ.M

3 . Providing and Fixing Armstrong Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm or as required by the Architect/ approving engineer, made of a Moisture Resistant fibre board with minimum 595 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 13mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.59. The panels shall be mounted on special aluminium splines (keel) using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.

INSTALLATION ;- Install wooden battens (provided by others) of section 50x50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks provided by Armstrong over the lowest and second wooden batten at an on-centre distance of 600mm. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. (APPROVED BRAND - ARMSTRONG/ ANUTONE) 128.3959880094652 SQ.M

4 . Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per the choice of the Architect of size 600X600 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer.

INSTALLATION: 4nos. Armstrong wall panel Impalers of shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Armstrong Optra wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. (APPROVED BRAND - ARMSTRONG/ ANUTONE) 192.5939820141978 SQ.M

5 . Providing, Supplying and installing Potable water purification system with inbuilt water cooler RO system with minimum 25 ltrs per hour output including all complete. (Brand Eureka Forbes/ KENT) 0.0 EACH

6 . Providing and fixing C.P. brass concealed Stop valve of standard design and of approved make conforming to IS:8931. - 20 mm nominal bore. (Approved brand - ESCO/ Jaquar/ Equivalent) 0.0 EACH

7 . Supplying, Installing, commissioning and testing of outdoor type copper wound transformer continuosly rated for 3ph 50Hz at full load and temp.rise not exceeding 450 c by thermometer in oil and 500c by the resistance in winding after continuous run at full load rating ,the transformer should have oil unmersed winding having vactor group DY11 HT side connected in delta and LT sideconnected in star with neutral brought out connected to provide separate earthing .The transformer shall have power terminal arrangenent bushing / cable end box on HT side and cable end box on LT side 2 nos channels with stoppers shall be provided and fix on the provided plinth for mounting the transformer .The transformer should have following standard fitting.Transformer shall be latest manufacturing standards as per amended IS specification and the load & No load losses shall be limited to the values given below or as per IS 2026 or norms issued by SEB which ever are lower.

a Oil conservator with filling hole with cap and plain oil level gauge.

b Silica gel dehydrating breather charged with silica gel

c oil drain valve

d Lifting eyes / hooks

e Two earthing terminals

f Digram and rating plate

h Explosion vent

i 100 mm dia thermo meter with thermometer pocket

j Four bi directional plain rollar

k Power transformer 11000/433V with off load tap changer -12.5% to +2.5% in steps of 2.5% per BIS leveel-2

200KVA (No load loss 500w and load loss 3000w) 2 Each

11 . Providing and fixing 25 / 15 mm nominal gun metal gate valve class I with CI wheel of approved quality with union (Screwed end) 30 Each

12 . Supplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect. 26 Each

13 . Providing , fixing Dry Chemical Powder (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 20oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (4 Kg Capacity) 60 Each

14 . Carbon Di-oxide Type , Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ & PESO approved ,Controllable Discharge Mechanism, Discharge Hose & Horn As per ‘IS 15683’ & ‘IS 2878’ ISI mark Fire Extinguishers (Wheel Type or Squeeze Grip Type). Operating Temperature :- (-)20oC to (+)55oC Suitable for ‘B’ ‘C’ Class of FIRE (4.5 Kg Capacity) 12 Each

15 . Providing , fixing Modular type Fire Extinguishers for electrical rooms (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 10oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (5 Kg Capacity) 8 Each

16 . Supplying and fixing of Senior Executive Table with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. . Overall Dimention: 1500x750x750 mm Ht. Top made of Postformed MDF board with pvc edge beading. Understucture also made up of pre laminated particle board with pvc edge beading. Top- Size :- 1500x750x25 MM thk. Postformed MDF Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Modesty- Modesty made up of 18 MM thk. Pre Laminated MDF Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Under Structure- Side Leg made with a Combination of 25 MM thk. Pre Laminated MDF Board with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. Cable duct made up of 0.8 mm CRCA Sheet. Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of MDF board covered by 2 mm thick PVC Edge beading by Through Feed Machine. Side Table- 1200x500x715 mm. Storage Size:- W:450xD:450x600 mm Ht. Top made of 25 mm thick Postformed MDF Board. Under structure made of 18 mm thick Pre Laminated Particle Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Wooden Pedestal- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated MDF Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated MDF Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. Filing drawer and other 2 drawer with teliscopic channel for smooth movement. Cap & Levellers- Flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 9 EACH

17 . Supplying and fixing of Dining/ Cafeteria Chair with following specification, Approved Brand - Godrej/ Durian/ Featherlite/ Bonton. The overall size of dinning chair shall be 520mm (B) x 550mm(D) x 840mm total height x 450mm sear height. The seat and back are made of injection moulded high impact strength polypropylene polymer compound with indoor grade UV Resistance. The Powder coated (DFT50+microns) welled tubular frame is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tube. The Shoes are made of high impact strength polypropylene polymer compound with indoor grad UV Resistance and pressed fitted with tubular frame. 54 EACH

18 . Supplying and fixing of Two Seater Sofa with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. . Providing and placement of 2 seater sofa with Overall Size 1360mm(W) 850mm(D) 890(H). Seat Ht 450mm. Handle Ht- 650mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free). Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 32mm thick U foam, Density : 28. 32mm thick U foam, Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 75mm. 4 EACH

19 . Supplying and fixing of Three Seater Sofa with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. . Providing and placement of 3 seater sofa with Overall Size 1860mm(W) 850mm(D) 890(H). Seat Ht 450mm. Handle Ht- 650mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free). Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 32mm thick U foam, Density : 28. 32mm thick U foam, Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 75mm. 2 EACH

20 . Supplying and fixing of Centre Table with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Featherlite/ Bonton, as per approved colour and design. Overall Size: 1200 x 600 x 450 mm Legs shall made out of 7 5 x7 5 mm teal rood section. Top rail shal1 be made of 7 0x22mm as per photograph. Top shall be made of 18mm veneer faced MDF board. Teak wood beading of 18mm shall be fitted as per approval. Polish- PU polish shall be done. 3 EACH

21 . Supplying and fixing of Regular Office Table with Side Unit with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Overall Dimention: 1500x600x750 mm Ht. Top made of pre laminated MDF board with pvc edge beading. Understucture also made up of pre laminated particle board with pvc edge beading. Top- Size :- 1500x600x25 MM thk. Pre Laminated MDF Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Modesty- Modesty made up of 18 MM thk. Pre Laminated PMDF Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Under Structure- Side Leg made with a Combination of 25 MM thk. Pre Laminated MDF Board with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. Cable duct made up of 0.8 mm CRCA Sheet. Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of MDF board covered by 2 mm thick PVC Edge beading by Through Feed Machine. SDU with Drawer- Size: Height:750mm,Width:900mm,Depth:450mm. Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-laminated MDF Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Superior Quality make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Cap & Levellers- Flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 63 EACH

22 . Supplying and fixing of Office Chair with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size: Total Height-1000mm, Depth 660mm, Width-640mm Seat Height: 510mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. 12 mm Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Two position Lockable synchrony tilt mechanism with Single piece integral skin. 2-D Up & down height adjustable PU arm rest. Quality tapestry. High density Moulded PU cushion. Upholstery 1.5 Mtr. 113 EACH

23 . Supplying and fixing of Chair for Computer Operatorswith following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size-H:970-1070mm, Seat ht: 480-580mm, D-490mm, W-490 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening. Back with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable Centre Tilt Mechanism and with Single piece Die castes Fixed PP arm rest . Quality Mesh Febric. High density Moulded PU cushion. 16 EACH

24 . Supplying and fixing of Chair for Visitors, AV room, Library, Seminar Hall , with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size:-Overall H: 890mm,D:580mm,W: 545mm: - Back & Seat Moulded Cushion, Non-revolving • Back Outer PPCP • Crape Tapestry • PU Handle • Hot pressed Ply • Frame Oval Tube 13*31 mm-16g With Powder Coated. 484 EACH

25 . Supplying and fixing of Multipurpose Table, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size - 1800x1200x750mm. Top made of 25 mm thick Pre laminated Particle Board. Under structure made of 40x40x1.6 mm thick Square Tube. The product comes in knock-down conditional for ease of transportation. No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 16 EACH

26 . Supplying and fixing of Work Station, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Overall Dimention 1200mm W X 600mm D X 750mm H. Top-Made from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC edge band all around, Understructure - Made of 18 mm thick pre laminated particle board. with Fixed Pedestal. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 27 EACH

27 . Supplying and fixing of Steel Almirah, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size:-height:1980mm width:910mm depth:485mm Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication.4 adjustable shelf. Three way locking device with six levers superior quality lock for Door. Doors are mounted on steel hinge brackets. Body 22 Gauge, Door 20 Gauge. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 26 EACH

28 . Supplying and fixing of Computer Table (computer lab & digital library), with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. 4 Seater Workstation Overall Dimension - 2463x1270x1215 mm Ht. Worktop Ht:- 750 mm. Made Up Of combination of 70 mm thick Tile Base & 21 mm thick Panel base Partition System. Individual work top size - 1200x600x25 mm thick. Middle Partition - 70mm Thick Tiles Base Partition. Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coated Sections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also available in Fabric and Steel option. Frame structure are fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium. Side Partition - 21mm thk Partition Panel. Modular panel based partition frame are made of Extruded Aluminium sections. The different types of Aluminium profiles used in frame structure of modular partition 21 mm width. Side Panels are made of PLPB 18mm. Panel are available in PLPB and Fabric / White Writing Board. Worktop- are made of 25mm thick Pre-laminated Particle Board . All exposed edges are covered with 2mm thk PVC edge bend by machine. fitted to the partition with necessary M.S. cold rolled close annealed duly Powder Coated brackets. Mobile Pedestal unit PLPB- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. provision of Casters for mobility. Special drawer slides for filing drawer. Other drawers on roller slides. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 6 EACH

29 . ࠁ畓灰祬湩⁧湡⁤楦楸杮漠⁦瑓敥慂杧条⁥慒正‬楷桴映汯潬楷杮猠数楣楦慣楴湯†楷桴㌠礠慥獲眠牡慲瑮ⱹ䄠灰潲敶⁤牂湡⁤‭潇牤橥 畄楲湡 效浲湡䴠汩敬⽲䈠湯潴Ɱ愠⁳数⁲灡牰癯摥挠汯畯⁲湡⁤敤楳湧‮††††††††††††††††††††††††††癏牥污楓敺‭㜹‵⁸㔴‰⁸〲〰洠⹭圠瑩⁨‵潮⁳景䰠慯楤杮䰠癥汥⹳䴠摡⁥灵漠⁦㠮洠桴捩慰敮汳⁳…湁汧獥洠摡⁥景ㄠ㘮洠桴捩⹫¾ ٘Ȉ匀灵汰楹杮愠摮映硩湩⁧景删慥楤杮吠扡敬⠠楌牢牡⥹‬ 13 EACH

30 . 灯☠戠瑯潴档湡敮牃慣瀠敲獳映牯敭⁤敳瑣潩景㌠砰〵ㅸ㘮洠桴⹫䰊癥汥敬獲‭‴潮⁳景映慬⁴祴数氠癥汥敬⁲慨⁳敢湥瀠潲楶敤⁤瑡戠瑯潴潦⁲敭瑮楡楮杮氠癥汥‮瑉愠獬牰癥湥楴杮猠牣瑡档獥漠汦潯⁲…牐摯捵⁴獡眠汥⹬䌊湯瑳畲瑣潩⵮吠敨瀠潲畤瑣挠浯獥椠湫捯⵫潤湷挠湯楤楴湯污映牯攠獡⁥景琠慲獮潰瑲瑡潩⹮䘊湩獩⁨‭潎栠牡⁰摥敧⁳湩琠敨瀠潲敤瑣‮汁瑳敥潣灭湯湥獴愠敲攠潰祸瀠睯敤⁲潣瑡摥映汯潬敷⁤祢猠癥湥琠湡獫愠瑮⁩潣牲獯潩牴慥浴湥⁴景猊牵慦散ਮ¹ ՔȈ匀灵汰楹杮愠摮映硩湩⁧景䌠湯敦敲据⁥慴汢ⱥ眠瑩⁨潦汬睯湩⁧灳捥晩捩瑡潩眠瑩⁨″敹牡⁳慷牲湡祴‬灁牰癯摥䈠慲摮ⴠ䜠摯敲⽪䐠牵慩⽮䠠牥慭楍汬牥 潂瑮湯‬獡瀠牥愠灰潲敶⁤潣潬牵愠摮搠獥杩⹮††††††††ㄠ‶敓瑡牥䌠湯敦敲据⁥慔汢⁥‭癏牥污楄敭瑮潩㩮㘠〰砰㈱〰㝸〵洠瑈‮潔⁰慭敤漠⁦牐汥浡湩瑡摥瀠牡楴汣⁥潢牡⁤楷桴瀠捶攠杤⁥敢摡湩⹧唊摮牥瑳捵畴敲洠摡⁥灵漠⁦牰⁥慬業慮整⁤慰瑲捩敬戠慯摲眠瑩⁨癰⁣摥敧戠慥楤杮ਮ潔⵰㈠‵䵍琠歨倠敲慬業慮整⁤慐瑲捩敬䈠慯摲‮楓敤攠杤獥挠癯牥摥戠⁹′浭琠楨正倠䍖䔠杤⁥敢摡湩⁧祢吠牨畯桧䘠敥⁤慍档湩⁥‮吨敨洠湩畭楳敺漠⁦桴⁥潴⁰潦⁲′敐獲湯猠潨汵⁤敢ㄠ㔳砰〶⤰䴊摯獥祴‭潍敤瑳⁹慭敤甠⁰景ㄠ‸䵍琠歨‮牐⁥慌業慮整⁤慐瑲捩敬䈠慯摲‮灏湥攠杤獥挠癯牥摥戠⁹′浭琠楨正倠䍖䔠杤⁥敢摡湩⁧祢吠牨畯桧䘠敥⁤慍档湩⹥唊摮牥匠牴捵畴敲‭楓敤䰠来洠摡⁥㔲䴠⁍桴⹫倠敲䰠浡湩瑡摥倠牡楴汣⁥潂牡⁤‮牐癯獩潩景䌠扡敬洠湡条牥愠⁳数⁲⹌⹈漠⁲⹒⹈猠摩⁥敲畱物浥湥⹴传数摥敧⁳景倠牡楴汣⁥潢牡⁤潣敶敲⁤祢㈠洠桴捩噐⁃摅敧戠慥楤杮戠⁹桔潲杵⁨敆摥䴠捡楨敮‮慃⁰…敌敶汬牥⵳㈠渠獯漠⁦汦瑡琠灹⁥敬敶汬牥椠慥档琠扡敬栠獡戠敥牰癯摩摥愠⁴潢瑴浯映牯洠湥慴湩湩⁧敬敶⹬䤠⁴污潳瀠敲敶瑮湩⁧捳慲捴敨⁳湯映潬牯☠倠潲畤瑣愠⁳敷汬ਮ潃獮牴捵楴湯‭桔⁥牰摯捵⁴潣敭⁳湩欠潮正搭睯潣摮瑩潩慮潦⁲慥敳漠⁦牴湡灳牯慴楴湯ਮ楆楮桳‭潎猠慨灲攠杤獥椠桴⁥牰摯捥⹴䄠汬猠整汥挠浯潰敮瑮⁳牡⁥灥硯⁹潰摷牥挠慯整⁤潦汬睯摥戠⁹敳敶慴歮⁳湡楴挠牯潲楳湯琠敲瑡敭瑮漠⁦畳晲捡⹥ ܀묀଀ࠀ畓灰祬湩⁧湡⁤楦楸杮漠⁦桗瑩⁥潂牡Ɽ眠瑩⁨潦汬睯湩⁧灳捥晩捩瑡潩眠瑩⁨″敹牡⁳慷牲湡祴‬灁牰癯摥䈠慲摮ⴠ䜠摯敲⽪䐠牵慩⽮䠠牥慭楍汬牥 潂瑮湯‬獡瀠牥愠灰潲敶⁤潣潬牵愠摮搠獥杩⹮††圠楨整䈠牯摡㠠砧✴䠠⁃潃敲丠湯洠来敮楴⹣´ ʞĈ匀灵汰楹杮愠摮映硩湩⁧景䰠睯䠠楥桧⁴瑓牯条ⱥ眠瑩⁨潦汬睯湩⁧灳捥晩捩瑡潩眠瑩⁨″敹牡⁳慷牲湡祴‬灁牰癯摥䈠慲摮ⴠ䜠摯敲⽪䐠牵慩⽮䠠牥慭楍汬牥 潂瑮湯‬獡瀠牥愠灰潲敶⁤潣潬牵愠摮搠獥杩⹮†††††††匠穩㩥圠摩桴ㄺ㔰洰Ɑ䐠灥桴㐺〵浭‬效杩瑨㜺〵浭吠灯洠摡⁥景ㄠ洸桴捩牐ⵥ慬業慮整⁤慐瑲捩敬䈠慯摲‮桗汯⁥瑳畲瑣牵⁥…潄牯猧愠敲洠摡⁥祢ㄠ洸桴⹫倠敲氭浡湩瑡摥倠牡楴汣⁥潂牡⹤匠摩⁥摅敧⁳潣敶敲⁤楷桴倠䍖攠杤⁥慢摮漠摥敧戠湥楤杮洠捡楨敮䌮湯瑳畲瑣潩⵮吠敨瀠潲畤瑣挠浯獥椠湫捯⵫潤湷挠湯楤楴湯污映牯攠獡⁥景琠慲獮潰瑲瑡潩⹮䘊湩獩⵨丠桳牡⁰摥敧⁳湩琠敨瀠潲敤瑣‮汁瑳敥潣灭湯湥獴愠敲攠潰祸瀠睯敤⁲潣瑡摥映汯潬敷⁤祢猠癥湥琠湡獫愠瑮⁩潣牲獯潩牴慥浴湥⁴景猠牵慦散쨮଀砀ࠃ畓灰祬湩⁧湡⁤楦楸杮漠⁦楓⁸敓瑡牥䐠湩湩⁧慔汢⁥䌨晡瑥牥慩Ⱙ眠瑩⁨潦汬睯湩⁧灳捥晩捩瑡潩眠瑩⁨″敹牡⁳慷牲湡祴‬灁牰癯摥䈠慲摮ⴠ䜠摯敲⽪䐠牵慩⽮䠠牥慭楍汬牥 潂瑮湯‬獡瀠牥愠灰潲敶⁤潣潬牵愠摮搠獥杩⹮†牐癯摩湩⁧湡⁤汰捡浥湥⁴景䌠湡整湥琠扡敬‮楓敺猠慨汬戠⁥㜱㐳圠摩桴洠⁸ㄱ㔷䐠灥桴洠⁸㔷‰效杩瑨洠‮潔⁰桳污敢㈠‵浭琠楨正戠獡⁥慭整楲污猠慨汬戠⁥㔲洠䑍⁆潢牡⁤‮湏琠灯倠⁕慰湩楴杮漠⁦業楮畭䠲栠牡湤獥⁳楷桴㜠┵朠慬獳愠⁳数⁲潣潬牵挠慨瑲圮楨整䰠浡湩瑡⁥湯戠瑯潴灳捥慩汬⁹牰景汩摥攠杤獥映牯挠浯潦瑲⸠吠敨唠摮牥猠牴捵畴敲猠慨汬戠⁥慨楶杮戠湥⁤楰数猠牴捵畴敲漠⁦卍瀠睯敤⁲潣瑡摥⸠倠灩⁥楤⁡㠳洠‬′浭琠楨正愠摮椠⁴桳污敢映瑩整⁤楷桴琠灯戠⁹卓洠捡楨敮猠牣睥⁳‮敌獧猠慨汬戠⁥景䴠⁓潰摷牥挠慯整⁤湡⁤㠳洠楤⹡瀠灩⁥敬獧愠敲映硩摥眠瑩⁨湵敤⁲瑳畲瑣牵⁥湡⁤慴汢⁥潴⹰䜠楬敤猠慨汬戠⁥景倠慬瑳捩映硩摥愠⁴桴⁥湵敤⁲瑳畲瑣牵⁥潴瀠敲敶瑮琠敨搠浡条⁥景琠扡敬琠灯搠牵湩⁧瑳捡楫杮Ì ޚȈ匀灵汰楹杮愠摮映硩湩⁧景倠楲据灩污吠扡敬‬楷桴映汯潬楷杮猠数楣楦慣楴湯†楷桴㌠礠慥獲眠牡慲瑮ⱹ䄠灰潲敶⁤牂湡⁤‭潇牤橥 畄楲湡 效浲湡䴠汩敬⽲䈠湯潴Ɱ愠⁳数⁲灡牰癯摥挠汯畯⁲湡⁤敤楳湧‮†††††††癏牥污楄敭瑮潩㩮㈠〱砰ㄲ〰㝸〵洠瑈‮潔⁰慭敤漠⁦牰⁥慬業慮整⁤䑍⁆潢牡⁤楷桴瀠捶攠杤⁥敢摡湩⹧唠摮牥瑳捵畴敲愠獬慭敤甠⁰景瀠敲氠浡湩瑡摥䴠䙄戠慯摲眠瑩⁨癰⁣摥敧戠慥楤杮‮潔⵰匠穩⁥ⴺ㈠〱砰〹砰〵䴠⁍桴넨‵浭⸩倠敲䰠浡湩瑡摥䴠䙄䈠慯摲‮楓敤攠杤獥挠癯牥摥戠⁹′浭琠楨正倠䍖䔠杤⁥敢摡湩⁧祢吠牨畯桧䘠敥⁤慍档湩⹥䴠摯獥祴‭潍敤瑳⁹慭敤甠⁰景㈠‵䵍琠歨‮牐⁥慌業慮整⁤䑍⁆潂牡⹤传数摥敧⁳潣敶敲⁤祢㈠洠桴捩噐⁃摅敧戠慥楤杮戠⁹桔潲杵⁨敆摥䴠捡楨敮‮湕敤⁲瑓畲瑣牵ⵥ匠摩⁥敌⁧慭敤漠⁦㔲䴠⁍桴⹫倠敲䰠浡湩瑡摥䴠䙄䈠慯摲‮牐癯摩湩⁧灳捥慩灳捡⁥潦⁲数敤瑳污眠楨档洠歡⁥⁡潢祸瀠瑥整湲搠獥杩湯戠瑯⁨湥⁤牦浯映潲瑮猠摩⹥䌠扡敬搠捵⁴慭敤甠⁰景ㄠ‸浭琠楨正䴠䙄‮牐癯獩潩景䌠扡敬洠湡条牥愠⁳数⁲⹌⹈漠⁲⹒⹈猠摩⁥敲畱物浥湥⹴传数摥敧⁳景䴠䙄戠慯摲挠癯牥摥戠⁹′浭琠楨正倠䍖䔠杤⁥敢摡湩⁧祢吠牨畯桧䘠敥⁤慍档湩⹥匠摩⁥慔汢ⵥ㤠〰㕸〰㝸〵洠⹭吠灯洠摡⁥景㌠‶浭琠楨正倠敲慬業慮整⁤䑍⁆潂牡⹤唠摮牥猠牴捵畴敲洠摡⁥景ㄠ‸浭琠楨正倠敲䰠浡湩瑡摥䴠䙄䈠慯摲‮灏湥攠杤獥挠癯牥摥戠⁹′浭琠楨正倠䍖䔠杤⁥敢摡湩⁧祢吠牨畯桧䘠敥⁤慍档湩⹥圠潯敤敐敤瑳污‭楓敺›效杩瑨㘺〵浭‬楗瑤㩨〴洰Ɑ䐠灥桴㐺〵浭吠灯洠摡⁥景ㄠ洸桴捩牐ⵥ慬業慮整⁤䑍⁆潂牡⹤匠摩⁥戬捡湡⁤牤睡牥映潲瑮愠敲洠摡⁥祢ㄠ洸桴⹫倠敲氭浡湩瑡摥䴠䙄䈠慯摲‮敍慴汬捩映湩獩⁨敨癡⁹畤祴栠湡汤⹥匠灵牥潩⁲畱污瑩⁹慭敫映潲瑮洠畯瑮摥氠捯⹫匠数楣污搠慲敷⁲汳摩獥映牯映汩湩⁧牤睡牥‮瑏敨⁲牤睡牥⁳湯爠汯敬⁲汳摩獥‮慃⁰…敌敶汬牥⵳ㄠ′潮⁳景映慬⁴祴数氠癥汥敬⁲慨⁳敢湥瀠潲楶敤⁤瑡戠瑯潴潦⁲敭瑮楡楮杮氠癥汥‮瑉愠獬牰癥湥楴杮猠牣瑡档獥漠汦潯⁲…牐摯捵⁴獡眠汥⹬䌠湯瑳畲瑣潩⵮吠敨瀠潲畤瑣挠浯獥椠湫捯⵫潤湷挠湯楤楴湯污映牯攠獡⁥景琠慲獮潰瑲瑡潩⹮䘊湩獩⵨丠桳牡⁰摥敧⁳湩琠敨瀠潲敤瑣‮汁瑳敥潣灭湯湥獴愠敲攠潰祸瀠睯敤⁲潣瑡摥映汯潬敷⁤祢猠癥湥琠湡獫愠瑮⁩潣牲獯潩牴慥浴湥⁴景猊牵慦散.܀렀଀鴀ࠃ畓灰祬湩⁧湡⁤楦楸杮漠⁦牐湩楣慰晏楦散䌠慨物‬楷桴映汯潬楷杮猠数楣楦慣楴湯†楷桴㌠礠慥獲眠牡慲瑮ⱹ䄠灰潲敶⁤牂湡⁤‭潇牤橥 畄楲湡 效浲湡䴠汩敬⽲䈠湯潴Ɱ愠⁳数⁲灡牰癯摥挠汯畯⁲湡⁤敤楳湧‮††††††††††††††††††††††††癏牥污楓敺ⴠ䴠硡䴯湩‮效杩瑨ㄭ㠲⼵ㄱ㔶浭‬楗瑤⵨㤶洰Ɑ䐠灥桴ⴠ㜠〰浭‬敓瑡䠠楥桧⵴㐶⼰㈵洰Ɑ匠慥⁴楓敺圭㔭〶浭砠䐠ਭ㌵洰Ɑ䈠捡楓敺䠭㜭〷浭砠圠㔭〳浭‬ⴵ牐湯⁧祮潬慢敳映牯猠慴楢楬祴‮睔湩圠敨汥栠慥祶䐠瑵⁹慃瑳牯映牯攠獡⁹潭楢楬祴甠摮牥氠慯⹤䠊瑯瀠敲獳摥瀠祬眠潯⁤楷桴猠整汥吠中瑵⁳潦⁲楲楧⁤慦瑳湥湩⹧匠畴摲⁹瑳敥潣畬湭朠獡氠晩⁴潦⁲散瑮敲猠灵潰瑲愠摮猠慥⁴敨杩瑨愠橤獵浴湥⹴吊汥獥潣楰⁣䉁⁓潣敶⁲癯牥猠整汥挠汯浵⹮䰠捯慫汢⁥散瑮敲琠汩⁴敭档湡獩湡⁤楷桴匠湩汧⁥楰捥⁥楤⁥慣瑳獥丠汹湯愠浲爠獥⁴楷桴䌠獵楨湯ਮ畑污瑩⁹慌桴牥瑩⁥慴数瑳祲眠瑩⁨楳杮敬愠摮搠畯汢⁥瑳瑩档‮楈桧搠湥楳祴倠⁕畣桳潩⹮伊敶⁲污灡数牡湡散漠⁦牰摯捵⁴獡猠潨湷椠楰瑣牵⹥䄊慶汩扡敬椠湯祬䈠慬正䰠瑡敨楲整.܀뼀଀됀ࠂ
畓灰祬湩⁧湡⁤楦楸杮漠⁦潂歯猠慴正⠠牦湯⁴灯湥湩⥧‬楷桴映汯潬楷杮猠数楣楦慣楴湯†楷桴㌠礠慥獲眠牡慲瑮ⱹ䄠灰潲敶⁤牂湡⁤‭潇牤橥 畄楲湡 效浲湡䴠汩敬⽲䈠湯潴Ɱ愠⁳数⁲灡牰癯摥挠汯畯⁲湡⁤敤楳湧‮††††††癏牥污楓敺ⴠ㤠〰㑸〰ㅸ〸‰浭䠠⹴䈠摯⁹瑓畲瑣牵㩥䴠摡⁥灵漠⁦牰浩⁥畱污瑩⁹潣摬爠汯敬⁤汣獯⁥湡敮污摥䴠⁓桳敥⁴⸱洰桴″潦摬猠摩੥慰敮楷桴搠慩㤠浭栠汯⁥湩洠摩汤⁥景攠捡⁨慰敮桴潲杵潨瑵琠敨栠楥桧⁴瑡㈠洵楰捴⁨潦⁲敨杩瑨愠橤獵慴楢楬祴漠⁦桳汥敶⹳䄠橤獵慴汢⁥業摤敬猊敨晬洠摡⁥畯⁴景倠楲敭儠慵楬祴挠汯⁤潲汬摥挠潬敳愠湮慥敬⁤⸱洰桴⹫匠敨瑥‮潃灭敬整欠潮正潤湷愠獳浥汢⹹䄠汬猠整汥挠浯潰敮瑮⁳牡੥灥硯⁹潰摷牥挠慯整⁤潦汬睯摥戠⁹敳敶慴歮⁳湡楴挠牯潲楳湯琠敲瑡敭瑮漠⁦畳晲捡⹥Ð ŶȈ匀灵汰楹杮愠摮映硩湩⁧景䴠条穡湩⁥慒正‬楷桴映汯潬楷杮猠数楣楦慣楴湯†楷桴㌠礠慥獲眠牡慲瑮ⱹ䄠灰潲敶⁤牂湡⁤‭潇牤橥 畄楲湡 效浲湡䴠汩敬⽲䈠湯潴Ɱ愠⁳数⁲灡牰癯摥挠汯畯⁲湡⁤敤楳湧‮††††††††潂歯删捡⵫匠穩⁥㈱〰浭圠砠㌠〵浭䐠砠ㄠ〲洰ੈ瑓畲瑣牵⁥慭敤漠⁦牰⁥慬業慮整⁤慰瑲捩污戠慯摲ㄠ洸桴捩湫獥⹳䔊杤獥琠敢猠慥敬⁤楷桴㈠浭琠楨正倠䍖攠杤⁥慢摮湩⁧慭档湩⁥慰瑳摥.܀뜀଀甀ࠅ畓灰祬湩⁧湡⁤楦楸杮漠⁦敌瑣牵⁥慨汬㌠匠慥整⁲敄歳愠摮䌠慨物映牯攠捡⁨敳瑡‬楷桴映汯潬楷杮猠数楣楦慣楴湯†楷桴㌠礠慥獲眠牡慲瑮ⱹ䄠灰潲敶⁤牂湡⁤‭潇牤橥 畄楲湡 效浲湡䴠汩敬⽲䈠湯潴Ɱ愠⁳数⁲灡牰癯摥挠汯畯⁲湡⁤敤楳湧‮†††††††††††††††††††††††††††㌠匠慥整⁲敌瑣牵⁥敄歳‭癏牥污楄敭瑮潩㩮‭楓敺㨠‭ⵌ〲㔲砠䐠㘭〰砠䠠㜭〵‮䤨摮癩摩慵慔汢⁥潔⁰㜶砵〶⤰吊灯洠摯獥祴☠匠敨晬洠摡⁥景ㄠ‸浭琠楨正倠敲氠浡湩瑡摥䴠䙄‮潍敤瑳⁹瑈‮〶‰浭‮楓敤氠来洠摡⁥灵漠⁦潣扭湩瑡潩景䌠䍒⁁桳敥⁴ਦ敒瑣湥畧敬⁲畔敢㔠砰㔲ㅸ㈮‮慂敳猠捥楴湯洠摡⁥景ㄠ㘮洠桴捩卍䌠䍒⁁ 12 EACH

31 . heet. Side leg covered with 1.2 mm thick MS CRCA sheet. Tie member made of 25x25x1.2 mm thick Square tube. Front modesty support made of 25x25x1.2 mm thic Square tube. The desk grouted with high quality Anchor Fastners. Floor must be minimum 100mm thick RCC slab to grout the desk. Chair (for 3 seat) - Specification- Size-H:970-1070mm, Seat ht: 480-580mm, D-490mm, W-490 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening. Back with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable Centre Tilt Mechanism and with Single piece Die castes Fixed PP arm rest . Quality Mesh Febric. High density Moulded PU cushion.Þ î;
]o LIFTL
PRODUCT- DETAIL- OTIS GeN2-Nova_MRL-1MPS/ Schindler 3000/ Johnson Nextra %
CAPACITY(Kgs) - 884 kg 13 persons. 
SPEED(mps) - 1mps. 
CONTROLLER TYPE - ACD5-MRL (
DRIVE - VF Regenerative (Closed Loop) ,
POWER SUPPLY - 400/415 Volts (3 phase AC) )
OPERATION - Full collective operation. 
CAR GROUP - One car (simplex) A
MACHINE - PM Gearless (Located in shaft on top of guide rails) ,
TRACTION MEDIA - Flat Coated Steel Belt. CAR FINISH - .Rear Mid Panel= Stainless Steel # 4 (Hairline)1Rear Corner Panel= Stainless Steel # 4 (Hairline)+Side Panel= Stainless Steel # 4 (Hairline)+Front Panel= Stainless Steel # 4 (Hairline)
FALSE CEILING TYPE - CD-41 6
FALSE CEILING FINISH - Stainless Steel # 4 (Hairline) 
VENTILLATION - Cross flow fan. H
HAND RAILS - Stainless Steel Mirror Finish Handrails on rear car panels 
FLOORING - Vinyl Tiles 4
CAR DOOR FINISH - Stainless Steel # 4 (Hairline) 7
LANDING DOOR FINISH - Stainless Steel # 4 (Hairline) #FIRE RATED DOORS - Not Available
PIT DEPTH - 1350 4
CAR & HOISTWAY DOOR TYPE- Central opening (CO) doors -
DOOR OPENING (W x H- MM )- 900mm W x 2000mm H 
DOOR OPERATOR- DC Door Operator ;COP for stops <= 12 (950mm) in Stainless Steel #4(Hairline)f
CAR POSITION INDICATOR- Monochrome LCD-Blue Background & White font Dot matrix (LED) Scrolling Display '
HALL FIXTURES- O2000 Pan Type Fixture , 6
HALL FIXTURES FACE PLATE- Stainless Steel #4(Hairline) ,
HALL BUTTON ARRANGEMENT- LCD Monochrome type Q

STANDARD FEATURES- Anti-nuisance Car Call Protection Independent Service (for Duplex only) Overload Device Nudging Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off 6
STOPS - 9 Stops with (all opening on the same side) 
Providing and Installing, Testing & Commissioning of 13 Passenger automatic (machine room less) Lift , including one year free maintenance which will be start from handing over the lift, all taxes and all complete as per following detail specifications. APPROVED BRAND - OTIS/ SCHINDLER/ JOHNSON5e u

OVER HEAD - 4500 ¤
OPTIONS INCLUDED- Grounding Switch, Automatic Rescue operation, Voice Synthesizer, Audible Car Call Button, Emergency Power Operation, Parking Key Switch, Intercom. I)2Nature of effluent - Effuluent from Waste areas%Daily average flow - 20 KLD / Per Day‹PH : 2.93PPM Total Suspended Solids : 75 ppm Biological Oxygen demand : 1008 ppm Chemical Oxygen demand : 2279.4 ppm Oil & Grease : 9.5 ppm-Effluent discharge standard after treatment :SPH : 6-7.5PPM Biological Oxygen demand : < 50 ppm Chemical Oxygen demand : <200 ppmLIST OF MECHANICAL EQUPMENT- $01 Bar Screen 0.5m x 0.5m 2nos SS/MSL02 Defused Aerating system 1 lot PVC /PP Pipe, Make - ASTRAL /SUPREME/FINOLXW03 Valves & inter connector pipe work 1 lot PVC /PP Pipe, Make - ASTRAL /SUPREME/FINOLX04 Tube modules 1 lot PPX05 Accessories for primary and secondary clarifier 1 lot MS/PVC Pipe, Make - TATA/JINDALc06 Alum solution tank with agitator 100 ltrs 0.5 - 1 HP (FRP/eqv) 1 No., Make - TATA/ PAINTAIR/EQVc07 Lime solution tank with agitator 100 ltrs 0.5 - 1 HP (FRP/eqv) 1 No., Make - TATA/ PAINTAIR/EQVT08 Poly electrolyte tank with agitator 100 ltrs 0.5 - 1 HP (FRP/eqv) 1 No., Make - V409 Blower 5 HP 2 Nos. (1W+1S)., Make - A1/ AKASH/EQVI10 Dosing Pump 100 L/Hr, 5Kg/cm2(Metering pump)3 Nos., Make - E-DOSE/EQVU11 Dosing pump 5 L/Hr, 5Kg/cm2 1 No., Make - E-DOSE/EQV, Make - KIRLOSKAR/KSB/WILLO @12 Effluent transfer pump capacity 3m3/hr 20M Head 2Nos (1W+1S).Q13 Slag recirculation pump 2m3/hr 20M Head 1 No (1W), Make - KIRLOSKAR/KSB/WILLO Y14 Filter feed pump capacity 3m3/hr 20M Head 2 Nos. (1W+1S)., Make - KIRLOSKAR/KSB/WILLO 15 MBBR Media 1 Lot.N16 Two stage Filters (FRP vessels) 2 Nos.(DMF/ ACF), Make - TATA/ PAINTAIR/EQV
Contractor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, Schematic flow diagram for the above mentioned components and additional components such as inserts, puddle flanges, vent pipes etc. if so required for the complete work.LIST OF INSTRUMENTS 71. Pressure gauges 3 nos./ All Pumps, Make - H.GURU/EQV82. Float switch -3 Nos for all pumps, Make - DANFOSS/EQV 3. Rota meterLIST OF ELECTRICAL ITEMS F01 Control panel with automation system 1no., Make - L&T/SCHNEIDER/EQV+02 Power cable, Make - POLYCAB/HAVELLS/ EQV BAR SCREEN .Main Frame - MS Flats, 25 wide x 5 thick min./Bars - SS round bars 4 mm dia.or as per Vendor#Bar Spacing - 8 mm or as per VendorpAccessories - Anchor Fasteners for fittings, matching comber with long handle (MS) for removing floating solids.&Float switch with Automatic Operation gAll pumps will be operated with float switch with Automatic Operation connected with the control panel ¶UPVC puddle flanges as required to be provided (in the structural slab and wall) of various diameters. Puddle flanges shall be provided for all the structural component of the ETP. ¢Supply of vent pipes of 100 mm dia UPVC pipe with mosquito proof grating suitable for the ventilation purpose of the various tanks., Make - ASTRAL/SUPREME/FINOLEXDEFUSED AERATING SYSTEMAir diffusion system
Air piping shall comprise of pipes droppers/ laterals with MS (epoxy coated) Header and all drop pipes in PVC or GI complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good. 7EQT - 1 No., AERATION TANK - 1 No., MBBR Tank - 2 Nos.öNon clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid in SS304 shall be assembled in modular form so that they can be replaced / repaired BFine bubble diffusers in SS304 (Capacity 4 m3/hr or as per Vendor)1For EQT - 1 No., SHT - 1 No., MBBR Tanks - 2 Nos.hNote : Air dispersion system shall be provided for Equalisation Tank, Sludge holding Tank and MBBR Tank.qProviding and fixing all piping (as described below) and isolation control valves for making the system complete.9GI/PVC piping :Pumped effluent & tank overflow pipe line&MS Epoxy : Non Submerged Air piping TUBE MODULES$Supply installation of Tube Modules./ACCESSORIES FOR PRIMARY AND SECONDARY CLARIFIERMSupply installation of Accessories like MS and PVC pipe fitting, valves etc. ALUM SOLUTION TANK WITH AGITATOR6Supply installation of 100 ltrs FRP Tank with AgitatorIX) LIME SOLUTION TANK WITH AGITATOR8Supply & installation of 100 ltrs FRP Tank with AgitatorX)#POLY ELECTROLYTE TANK WITH AGITATORXI)BLOWER TWINLUBE3Supply & installation of twin Blower 1 w /1 std by XII) DOSING PUMP , Make - E-DOSE /EQV$Supply & installation of Dosing PumpXIII)Å
Providing and fixing chemical dosing system with all accessories, suitable to doze chemical soluktion upto 1 ppm doze (of Sodium Hypo-chloride solution) to a filtered water flow of 4000 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified.System : Metering TypeCapacity : 0-5 LPHFeed Solution : HypochloriteConc. Of Solution : 0.1,MOC and Capacity of Tank : HDPE - 100 LitresXIV)3EFFLUENT TRANSFER PUMP, Make - KIRLOSKAR/KSB/WILLO XV)5Raw Sewage Lifting Pumps, Make - KIRLOSKAR/KSB/WILLO Ø
Providing and fixing compact monoblock dry motor submersible pumps of suitable rating, with non-clog free flow open CI impeller, CI casing and SS Shaft, suitable for operation on 415 volts ± 10% , 3 Phase motor, 50Hz, A.C supply, speed 2900 RPM, including oil chamber, guide wire for lifting & lowering of pump, M.S. galvanized lifting chain, duck foot bend complete. The pump sets shall be supplied with required accessories & as per specification with the following : ,Pump Headers and other interconnecting pipesdComplete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 LotHButterfly valve and Dual Plate NRV of appropriate dia and rating - 1 Lot>Necessary cables from pump sets to pump starter panel - 1 Lot Discharge : 3 m3/Hr Head : 20 mSolid Handling : 30-35 mmNote :APumps shall be operated on cyclic timing with automatic timer setJ
One set consist of 2 nos. of pumps - 1 working & 1 stand by (Complete set as above no. pumps including cost for valves, piping, Control Panel, Cabling, contactors, breakers, overload relay, float switch, level indicators, pressure gauges etc as required and as specified and any other additional items to make the system complete); XVI)4SLAG RECIRCULATION PUMP, Make - KIRLOSKAR/KSB/WILLO 5Providing and fixing vertical multistage centrifugal clear water pump set with SS casing, SS impeller, SS-316 shaft, CI base with CED coating, complete directly coupled with TEFC induction motor of class "F" insulation, 2900 RPM, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply (with cartridge type mechanical seal), pressure gauges with gunmetal isolation cocks, vibration elimination pads, etc. mounted on a MS base frame bolted to cement concrete foundation complete in all respects and as per specification with the following capacities:Capacity : - 3.0 m3/hr Head : - 20 m+Note-CIP pumps can be common with item no.cMotor Efficiency Class - IE3XVII)ÈSupplying, Installation, testing and commissioning of chlorine dosing system compromising of Sintex Tank with inlet/ outlet connection, piping and valves alongwith metering pump of 0-5LPH for dosing. XVIII)ÄSupplying, Installation, testing and commissioning of CIP Dosing system compromising of Sintex Tank with inlet/ outlet connection, piping and valves alongwith metering pump of 0-5 LPH for dosing. XIX)ÃSupplying, Installation, testing and commissioning of CEB Dosing system compromising of Sintex Tank with inlet/ outlet connection, piping and valves alongwith metering pump of 0-5LPH for dosing. XX)tSupply, installation & commissioning of HDPE backwash tank of 500 Litre capacity including required level controllerXXI)Ì

Supply, installation, testing and commissioning of top discharge Stainless Steel bucket type Centrifuge of Suitable Capacity suitable for 20 KLD ETP capacity with feed pump (Monoblock Centrifugal Self Priming Type)  2 No. (1 working + 1 standby) with 1 No. standby stator, associated valves, pressure guage, level switches, polymer dosing tank, interconnecting piping and poly dosing system and other associated piping, valves and items as per approved P&I.XXII)

Providing & fixing on line pH meter digital type for Monitoring the online pH after Ultrafiltration. Including electrical wiring from panel to flow meter. Complete with all type of Plumbing & Electrical connections, accessories, wiring, conduits & supports complete with all respect.T XXIII)At Sewage InletXXIV)$At Raw Sewage Pump Outlet Rotameter XXV)$At Filter Feed Pump outlet RotameterXXVI)FILTER FEED PUMP‹Supply & installation of mono block pump with the capacity of 3m3/hr @20 meter head- 01 working & 01 stand by., Make - KIRLOSKAR/KSB/WILLO 1Providing and fixing vertical multistage centrifugal clear water pump set with CS casing, CS impeller, CS shaft, CI base with CED coating, complete directly coupled with TEFC induction motor of class "F" insulation, 2900 RPM, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply (with cartridge type mechanical seal), pressure gauges with gunmetal isolation cocks, vibration elimination pads, etc. mounted on a MS base frame bolted to cement concrete foundation complete in all respects and as per specification with the following capacities:?Complete inlet, outlet and header piping of suitable dia -1 LOTNo. of Pumps : 2 (1W+1S)½The cement concrete foundation shall be 200 mm high and 150 mm projection on all sides of M.S. base frame shall be designed by the STP Contractor and executed by the Main Civil Contractor.XXVII) MBBR MEDIAi)XXVIII)DMF FILTER/ MF FILTER¾Dual media filter FRP vessel with multi port valves accessories and filter media 600 mm dia with height of 1800 mm flow rate @3000 LPH back wash flow rate 200 LPH operating pressure 3kg/cm2 Ç The filter shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (heavy) and butterfly valves designed on 1.50 m / sec velocity.XXIX) ACF FILTERXXX)fELECTRICAL INSTALLATION FOR ETP, CONTROL PANEL WITH AUTOMATION SYSTEM INCLUDING CABLE TRAY WITH CABLE ž
Design, manufacture, assembly, wiring, testing at works and supply to site of following electrical panels/distribution boards/switch boards. The boards shall be designed and fabricated as per general specifications, technical details, specifications and notes as part of this tender /BOQ and relevant BIS codes. Quoted rates shall be including necessary cable trays, cabling, earthing, wiring, control cabling etc.BAlso, refer to General Notes and Specifications for Panels/ BoardsGENERAL NOTES FOR MCCB's:=ACB's & MCCB's shall be of 3P or 4P as called for in the BOQ./Ics = Icu = 100% for the MCCB's, MPCB's & ACB's,MCCB's shall be with extended rotary handle.£Exact rating (Amps), Poles, Type/Duty, Short circuit rating of MCCB is to be selected by the contractor as per load, fault and requirement and also approval taken.HAll Switchgear selections shall be as per manufacturer's recommendation.BContractor to submit manufacturer's selection charts for approval.9Only one make of switchgear to be used in a board /panel.All communicable meters should be looped inside the panels and this loop has to be brought to one terminal point in the panel for connectivity.=All energy meters shall be dual source and communicable type.eThe power factor capacitors shall be of inert gas type and shall be suitable for 525 volts operation.IP Rating : IP54Incomer:<
" 1 No. 63A, 3P, MCCB, 25 KA of suitable rating as per load.F
" MCCB shall be with inbuilt micro-processor based O/C & S/C releases.;
" Both the releases shall be with adjustable trip settings.E
" MCCB with 1NO + 1NC contacts and an auxiliary trip contact for BMS.Incomer Indications:
" R,Y,B phase indication lamps
" ON/OFF, Trip indication lamps*
" Indication lamps shall be LED type (63V)Incomer Metering:"
" 1 No. combined Digital VAF meter.
" Meter shall be (110V) and communicable type.
CT for Incomer Metering :3
" CT metering Class-1 accuracy CT s (one per phase)I
" CT shall be cast resin type & shall be of suitable burden (VA) & ratio.+PT for Incomer Metering & Indication Lamps:=
" 415V / "3 / 110V / "3 PT for metering and indication lamps.
" PT shall be Class-1 accuracy.
" PT shall be cast resin type.&
" PT shall be of suitable burden (VA).Protection for Metering PT:N
" TP MPCB of suitable rating & fault withstand capacity on primary side of PT.4
" TP MCB of suitable rating on secondary side of PT. Bus Bars:Z
" 100A, 3P, 25 KA, Aluminium Bus Bars of electrolytic grade with heat shrinkable sleeves.W
110V Control Transformer for Contactor Coils of Starters & out goings Indication lamps:-9
" 1 No. 415V / 55-0-55 V, cast resin control transformer.'
" Transformer to be of adequate burden.I
" Transformer with primary taps at ± 2.5%, ±5%, 50HZ, centre tap earthed.
" 110V control bus.z
" TP MPCB of suitable rating & fault withstand capacity at Primary side & DP MCB at secondary side of control transformer. OutgoingsDOL Starter Feeders for:/
" 2 Nos. for Sludge Recirculation Pumps (1W+1S).
" 2 Nos. 3.73 KW for Filter Feed Pumps (1W+1S)
" 2 Nos. for Screw Pump (1W+1S)
" 2 Nos. for Air Blower (1W+1S)Spare DOL Starter Feeders for:
" 1 Nos. 3.7 KW motor.
" 1 Nos. 5.6 KW motor.cFeeder for Sewage Sump Pump Panel / Panels (within pump room) (without starter): No. of feeders - 1@
" 1 No. 3P, MCCB, 25 KA of uitable rating as per load of 4.5 kW.R
" MCCB shall be with inbuilt adjustable thermal magnetic based O/C & S/C releases.2
" ON / OFF / TRIP Indication lamps LED type 110 V.
" Digital Ammeter.N
" 3 Nos. metering Class 1 accuracy cast resin CT's of suitable ratio & burden.`Feeder for etp Sump Pump Panel / Panels (within pump room) (without starter): No. of feeders - 18Feeder for ETP Bypass Sump Pump Panel (without starter):A
" 0 No. 3P, MCCB, 25 KA of uitable rating as per load of 11.2 kW.cFeeder for Soft Water Transfer Pump Panels (within pump room) (without starter): No. of feeders - 1gFeeder for Flushing Water Transfer Pump Panels (within pump room) (without starter): No. of feeders - 1A
" 1 No. 3P, MCCB, 25 KA of uitable rating as per load of 11.2 kW.iFeeder for Irrigation Water Transfer Pump Panels (within pump room) (without starter): No. of feeders - 11Spare Feeder similar to above (without starter): B
" 1 No. 3P, MCCB, 25 KA of uitable rating as per load of 11.2 kW.*20 KLD ETP PLANT EFFULUENT TREATMENT PLANTðPlastic manhole step or foot rest 30mm reinforcing bar. of the foot in various tanks/ components of the ETP for the purpose of accessability. The installation of the foot rest shall be done by the civil contractor as per civil GA drawing. ! ŸSupply installation of Defused Aerating System. Supply installation of PVC, EPVC, GI pipe fitting including valves, fittings with inter connecting piping work.`
Supply, installation, testing and commissioning of PVC MBBR media to be installed in MBBR Tanks PRIMARY CLARIFIER AND SECONDARY CLARIFIER (2 Nos.) and PVC tube deck settling media to be installed in Secondary Settling Tank alongwith suitable sludge removal arrangement either by pumps or air lifting pumps. Vendor to specify Surface area and flow rateLABORATORY FURNITUREAChemistry Lab 9 EACH

32 . oviding and Fixing wall bench ,dimension {W 750mm x L 12600mm x H 900mm} Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = {W 750mm x L 12600mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet. Over all Dimension of Table: W 750mm x L 12600mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L= 07 Nos 2 Shutter Sink Cabinet : 600mm L= 01 Nos Foot Space=600mm L=13 Nos Electric Race way: 16/6 amp switch and socket Anchor Make or equivalent = 01 Pair or more as required = 20 Nos Sink of SS304/PP 450*550mm, Work mounted three way water tap with swan neck spout = 01 Eye Washer table top on corner unit=01 Nos Made up of PU or GI pipe, SS gas pipe connection and distribution
 # Providing and Fixing Island bench ,dimension W 1500mm x L 10200mm x H 900mm Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = W 1500mm x L 10200mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet. Over all Dimension of Table: W 1500mm x L 10200mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L=12 Nos Foot Space=600mm L = 20 Nos Electric Race way: 16/6 amp switch and socket Anchor Make or equivalent = 24 Pair or more as required Sink of SS304/PP 450*550mm, Work mounted three way water tap with swan neck spout = 02 Nos with 2 Shutter Two Tier Reagent Rack = 600(H)X1200(L)X300(D) = 06 Nos
Providing and Fixing Cupboard with glass shutter Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick GI Sheet. Over all Dimension of Table: 2100mm H x 850mm L x 450mm D 5 Rack and 2 Shutter Cabinet: 850mm L
Providing and Fixing Laboratory Stool SS Frame with castor wheel, Seat dia: 350mm Height: 520mm (Adjustable) Expended height : 650mm Hydraulic air pressure based Base dia : 500mm.‚Fume Hood Make: Relicon Technologies Model: RT-126/ Equivalent (i). Over all Dimension: 1500 Lx850 D x900 H (mm) Approx. (ii). Design: Aerodynamic Floor mounted constant air volume Airflow type : Horizontal airfoil mounted on the worktop made of 0.6mm thick SS 304 sheet. (iii). Material of Construction Outer : The cabinet is fabricated using 0.6 mm thick powder coated 22 SWG CRCA Powder Coating Finish : Epoxy polyester type powder will be avoided for better chemical resistance and wear resistance Material of Construction Inner: Interior SS 304 sheet Construction Chemical and Heat resistant, Fire retardant, Smooth finish, Easily Cleanable Panels. (iv) Under storage : Should be provided with Drawer and shutter 02 Nos, with slab (v) Sash: The sash will be toughened glass with vertical rising frame. The bottom of the sash frame will have a full-length with handle. The sash will be counterbalanced with a weight to prevent titling and binding during operation. (vi) Baffle : A stable, non – adjustable baffle with a single slot on the back baffle to aid in distributing the flow of air into and through the hood. The baffle will be spaced out from the back liner and will be removable for cleaning. (vii) Centrifugal Blower In-Built Blower: CENTRIFUGAL BLOWER 1000 CFM Chemical &amp; heat resistant aerodynamically balanced impeller, with drain plug. Conforming to fume hood face velocity as required. Electrical motor ~1 HP, 220 V single phase. (viii) Suction Expected : 800-1000 cfm (ix) Ducting : 100mm pipe (x) Lighting : 230V, LED light with vapour proof housing and fitting for proper illumination (xi) Electrical Arrangements: Electrical Utilities 3 Nos. of 5/15 amp electrical points will be provided with tube light switch. Push button starter and electrical connector will be fixed on the top of the fume hood with all internal connections, Socket &amp xii. 1 Water, 1 Vacuum 1 Nitrogen 1 Compressed air.ҍ̈䈀瑯湡⁹慌⁢牐癯摩湩⁧湡⁤楦楸杮眠污敢据⁨搬浩湥楳湯笠⁗㔷洰⁸⁌㌱〲洰⁸⁈〹洰絭䜠慲楮整吠灯›片湡瑩⁥楷桴栠污⁦潲湵⁤潮楳杮‬捡摩爠獥獩慴瑮‬污慫楬爭獥獩慴瑮㴠笠⁗㔷洰⁸⁌㌱〲洰Ɑㄠ洸녭洲桴捩Ⱬ戠慬正䤊瑮牥潩⁲…硅整楲牯眠汩敢瀠潲楶敤⁤楷桴瀠睯敤⵲潣瑡摥映湩獩⹨㔨ⴰ〷楍牣湯⥳䴊瑡牥慩景䌠湯瑳畲瑣潩潦⁲潗歲䈠湥档㈺䜰琠楨正䌠䍒⁁桓敥⹴伊敶⁲污楄敭獮潩景吠扡敬›⁗㔷洰⁸⁌㌱〲洰⁸⁈〹洰††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††‱牄睡牥愠摮㈠匠畨瑴牥䌠扡湩瑥›〶洰㵌〠‷潎ੳ′桓瑵整⁲楓歮䌠扡湩瑥㨠㘠〰浭䰠‽㄰丠獯䘊潯⁴灓捡㵥〶洰㵌㐱丠獯䔊敬瑣楲⁣慒散眠祡›㘱㘯愠灭猠楷捴⁨湡⁤潳正瑥䄠据潨⁲慍敫漠⁲煥極慶敬瑮㴠〠‱慐物漠⁲潭敲愠⁳敲畱物摥㴠㈠‱潎ੳ楓歮漠⁦卓〳⼴偐㐠〵㔪〵浭‬潗歲洠畯瑮摥琠牨敥眠祡眠瑡牥琠灡眠瑩⁨睳湡渠捥灳畯⁴‽㄰䔊敹圠獡敨⁲慴汢⁥潴⁰湯挠牯敮⁲湵瑩〽‱潎⁳慍敤甠⁰景倠⁕牯䜠⁉楰数匊⁓慧⁳楰数挠湯敮瑣潩湡⁤楤瑳楲畢楴湯††††††††††††††††††††††††††††††††††††††††††††††††  ̭倀潲楶楤杮愠摮映硩湩⁧景䤠汳湡⁤敢据⁨搬浩湥楳湯圠ㄠ〵洰⁸⁌〱〲洰⁸⁈〹洰††††††††††††††††††††††††‮†††††††††††䜠慲楮整吠灯›片湡瑩⁥楷桴栠污⁦潲湵⁤潮楳杮‬捡摩爠獥獩慴瑮‬污慫楬爭獥獩慴瑮㴠圠ㄠ〵洰⁸⁌〱〲洰Ɑㄠ洸녭洲桴捩Ⱬ戠慬正䤊瑮牥潩⁲…硅整楲牯眠汩敢瀠潲楶敤⁤楷桴瀠睯敤⵲潣瑡摥映湩獩⹨㔨ⴰ〷楍牣湯⥳䴊瑡牥慩景䌠湯瑳畲瑣潩潦⁲潗歲䈠湥档㈺䜰琠楨正䌠䍒⁁桓敥⹴伊敶⁲污楄敭獮潩景吠扡敬›⁗㔱〰浭砠䰠ㄠ㈰〰浭砠䠠㤠〰浭ㄊ䐠慲敷⁲湡⁤′桓瑵整⁲慃楢敮㩴㘠〰浭䰠ㄽ′潎ੳ潆瑯匠慰散㘽〰浭䰠㴠㈠‰潎ੳ汅捥牴捩删捡⁥慷㩹ㄠ⼶‶浡⁰睳瑩档愠摮猠捯敫⁴湁档牯䴠歡⁥牯攠畱癩污湥⁴‽㐲倠楡⁲牯洠牯⁥獡爠煥極敲੤楓歮漠⁦卓〳⼴偐㐠〵㔪〵浭‬潗歲洠畯瑮摥琠牨敥眠祡眠瑡牥琠灡眠瑩⁨睳湡渠捥灳畯⁴‽㈰丠獯眠瑩⁨′桓瑵整ੲ睔楔牥删慥敧瑮删捡‽〶⠰⥈ㅘ〲⠰⥌㍘〰䐨 ‽㘰丠獯椀⁩⸱Ě倀潲楶楤杮愠摮映硩湩⁧畃扰慯摲眠瑩⁨汧獡⁳桳瑵整⁲湉整楲牯☠䔠瑸牥潩⁲楷汬戠⁥牰癯摩摥眠瑩⁨潰摷牥挭慯整⁤楦楮桳⠮〵㜭䴰捩潲獮਩慍整楲污漠⁦潃獮牴捵楴湯映牯圠牯敂据㩨〲⁇桴捩䥇匠敨瑥ਮ癏牥愠汬䐠浩湥楳湯漠⁦慔汢㩥㈠〱洰⁈⁸㔸洰⁌⁸㔴洰੄‵慒正愠摮㈠匠畨瑴牥䌠扡湩瑥›㔸洰݌楩⹩ㄠ刮潚汯杯⁹慌Ɫ倠潲楶楤杮愠摮映硩湩⁧慗汬戠湥档Ⱐ楤敭獮潩坻㜠〵浭砠䰠ㄠ㈳〰浭砠䠠㤠〰浭੽片湡瑩⁥潔㩰䜠慲楮整眠瑩⁨慨晬爠畯摮渠獯湩Ⱨ愠楣⁤敲楳瑳湡ⱴ愠歬污⵩敲楳瑳湡⁴‽坻㜠〵浭砠䰠ㄠ㈳〰浭‬㠱浭㊱浭琠楨正‬汢捡੫湉整楲牯☠䔠瑸牥潩⁲楷汬戠⁥牰癯摩摥眠瑩⁨潰摷牥挭慯整⁤楦楮桳⠮〵㜭䴰捩潲獮਩慍整楲污漠⁦潃獮牴捵楴湯映牯圠牯敂据㩨〲⁇桴捩剃䅃匠敨瑥ਮ癏牥愠汬䐠浩湥楳湯漠⁦慔汢㩥圠㜠〵浭砠䰠ㄠ㈳〰浭砠䠠㤠〰浭ㄊ䐠慲敷⁲湡⁤′桓瑵整⁲慃楢敮㩴㘠〰浭䰠‽㜰丠獯㈊匠畨瑴牥匠湩慃楢敮⁴›〶洰㵌〠‱潎ੳ潆瑯匠慰散㘽〰浭䰠ㄽ‴潎ੳ汅捥牴捩删捡⁥慷㩹ㄠ⼶‶浡⁰睳瑩档愠摮猠捯敫⁴湁档牯䴠歡⁥牯攠畱癩污湥⁴‽㄰倠楡⁲牯洠牯⁥獡爠煥極敲⁤‽ㄲ丠獯匊湩景匠㍓㐰倯⁐㔴⨰㔵洰Ɑ圠牯潭湵整⁤桴敲⁥慷⁹慷整⁲慴⁰楷桴猠慷敮正猠潰瑵㴠〠਱祅⁥慗桳牥琠扡敬琠灯漠潣湲牥甠楮㵴㄰丠獯䴠摡⁥灵漠⁦啐漠⁲䥇瀠灩੥卓朠獡瀠灩⁥潣湮捥楴湯愠摮搠獩牴扩瑵潩†††††††††ʹ倀潲楶楤杮愠摮映硩湩⁧獉慬摮戠湥档Ⱐ楤敭獮潩⁗㔱〰浭砠䰠ㄠ㈰〰浭砠䠠㤠〰浭††††††††††††††††††††††⸠†††††††††††††††††††††††††††††††††††††††††††††††††††片湡瑩⁥潔㩰䜠慲楮整眠瑩⁨慨晬爠畯摮渠獯湩Ⱨ愠楣⁤敲楳瑳湡ⱴ愠歬污⵩敲楳瑳湡⁴‽⁗㔱〰浭砠䰠ㄠ㈰〰浭‬㠱浭㊱浭琠楨正‬汢捡੫湉整楲牯☠䔠瑸牥潩⁲楷汬戠⁥牰癯摩摥眠瑩⁨潰摷牥挭慯整⁤楦楮桳⠮〵㜭䴰捩潲獮਩慍整楲污漠⁦潃獮牴捵楴湯映牯圠牯敂据㩨〲⁇桴捩剃䅃匠敨瑥ਮ癏牥愠汬䐠浩湥楳湯漠⁦慔汢㩥圠ㄠ〵洰⁸⁌〱〲洰⁸⁈〹洰੭‱牄睡牥愠摮㈠匠畨瑴牥䌠扡湩瑥›〶洰㵌㈱丠獯䘊潯⁴灓捡㵥〶洰⁌‽〲丠獯䔊敬瑣楲⁣慒散眠祡›㘱㘯愠灭猠楷捴⁨湡⁤潳正瑥䄠据潨⁲慍敫漠⁲煥極慶敬瑮㴠㈠‴慐物漠⁲潭敲愠⁳敲畱物摥匊湩景匠㍓㐰倯⁐㔴⨰㔵洰Ɑ圠牯潭湵整⁤桴敲⁥慷⁹慷整⁲慴⁰楷桴猠慷敮正猠潰瑵㴠〠′潎⁳楷桴㈠匠畨瑴牥吊潷吠敩⁲敒条湥⁴慒正㴠㘠〰䠨堩㈱〰䰨堩〳⠰⥄㴠〠‶潎ݳ癩‮‱瀮ࠃ桐獹捩⁳慌Ɫ倠潲楶楤杮愠摮映硩湩⁧慷汬戠湥档Ⱐ楤敭獮潩坻㜠〵浭砠䰠ㄠ㈳〰浭砠䠠㤠〰浭⁽††††††††††††††††††††††††䜠慲楮整吠灯›片湡瑩⁥楷桴栠污⁦潲湵⁤潮楳杮‬捡摩爠獥獩慴瑮‬污慫楬爭獥獩慴瑮㴠笠⁗㔷洰⁸⁌㌱〲洰Ɑㄠ洸녭洲桴捩Ⱬ戠慬正䤊瑮牥潩⁲…硅整楲牯眠汩敢瀠潲楶敤⁤楷桴瀠睯敤⵲潣瑡摥映湩獩⹨㔨ⴰ〷楍牣湯⥳䴊瑡牥慩景䌠湯瑳畲瑣潩潦⁲潗歲䈠湥档㈺䜰琠楨正䌠䍒⁁桓敥⹴伊敶⁲污楄敭獮潩景吠扡敬›⁗㔷洰⁸⁌㌱〲洰⁸⁈〹洰੭‱牄睡牥愠摮㈠匠畨瑴牥䌠扡湩瑥›〶洰㵌〠‷潎ੳ′桓瑵整⁲楓歮䌠扡湩瑥㨠㘠〰浭䰠‽㄰丠獯䘊潯⁴灓捡㵥〶洰㵌㐱丠獯䔊敬瑣楲⁣慒散眠祡›㘱㘯愠灭猠楷捴⁨湡⁤潳正瑥䄠据潨⁲慍敫漠⁲煥極慶敬瑮㴠〠‱慐物漠⁲潭敲愠⁳敲畱物摥㴠㈠‱潎ੳ楓歮漠⁦卓〳⼴偐㐠〵㔪〵浭‬潗歲洠畯瑮摥琠牨敥眠祡眠瑡牥琠灡眠瑩⁨睳湡渠捥灳畯⁴‽㄰䔊敹圠獡敨⁲慴汢⁥潴⁰湯挠牯敮⁲湵瑩〽‱潎⁳慍敤甠⁰景倠⁕牯䜠⁉楰数匊⁓慧⁳楰数挠湯敮瑣潩湡⁤楤瑳楲畢楴湯  ͆倀潲楶楤杮愠摮映硩湩⁧獉慬摮戠湥档‬楤敭獮潩⁗㔱〰浭砠䰠ㄠ㈰〰浭砠䠠㤠〰浭††††††††††††††††††††††††‮††††††††††††††††††††††††††††††††††††片湡瑩⁥潔㩰䜠慲楮整眠瑩⁨慨晬爠畯摮渠獯湩Ⱨ愠楣⁤敲楳瑳湡ⱴ愠歬污⵩敲楳瑳湡⁴‽⁗㔱〰浭砠䰠ㄠ㈰〰浭‬㠱浭㊱浭琠楨正‬汢捡੫湉整楲牯☠䔠瑸牥潩⁲楷汬戠⁥牰癯摩摥眠瑩⁨潰摷牥挭慯整⁤楦楮桳⠮〵㜭䴰捩潲獮਩慍整楲污漠⁦潃獮牴捵楴湯映牯圠牯敂据㩨〲⁇桴捩剃䅃匠敨瑥ਮ癏牥愠汬䐠浩湥楳湯漠⁦慔汢㩥圠ㄠ〵洰⁸⁌〱〲洰⁸⁈〹洰੭‱牄睡牥愠摮㈠匠畨瑴牥䌠扡湩瑥›〶洰㵌㐱丠獯䘊潯⁴灓捡㵥〶洰⁌‽〲丠獯†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††汅捥牴捩删捡⁥慷㩹ㄠ⼶‶浡⁰睳瑩档愠摮猠捯敫⁴湁档牯䴠歡⁥牯攠畱癩污湥⁴‽㐲倠楡⁲牯洠牯⁥獡爠煥極敲٤⹶ㄠ⸠̾Ȉ䴀瑡⁨慌Ɫ倠潲楶楤杮愠摮映硩湩⁧慷汬戠湥 12 EACH

33 . h ,dimension {W 750mm x L 13200mm x H 900mm} . Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = {W 750mm x L 13200mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet. Over all Dimension of Table: W 750mm x L 13200mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L= 07 Nos 2 Shutter Sink Cabinet : 600mm L= 01 Nos Foot Space=600mm L=14 Nos Electric Race way: 16/6 amp switch and socket Anchor Make or equivalent = 01 Pair or more as required = 21 Nos Sink of SS304/PP 450*550mm, Work mounted three way water tap with swan neck spout = 01 Eye Washer table top on corner unit=01 Nos Made up of PU or GI pipe 'Island bench ,dimension W 1500mm x L 3795mm x H 900mm Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = W 1500mm x L 3795mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet. Over all Dimension of Table: W 1500mm x L 3795mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L=6 Nos Foot Space=500mm L = 08 Nos"
Providing and fixing Over Head Cabinet with glass shutter Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick GI Sheet. Over all Dimension of Table: 600mm H x 600mm L x 450mm D 1 Rack and 2 Shutter Cabinet: 600mm Lvi. 1.vPsychology Lab, Providing and fixing wall bench ,dimension {W 750mm x L 13200mm x H 900mm} . Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = {W 750mm x L 13200mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet. Over all Dimension of Table: W 750mm x L 13200mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L= 07 Nos 2 Shutter Sink Cabinet : 600mm L= 01 Nos Foot Space=600mm L=14 Nos Electric Race way: 16/6 amp switch and socket Anchor Make or equivalent = 01 Pair or more as required = 21 Nos Sink of SS304/PP 450*550mm, Work mounted three way water tap with swan neck spout = 01 Eye Washer table top on corner unit=01 Nos Made up of PU or GI pipe  %Providing and fixing Island bench ,dimension W 1500mm x L 3795mm x H 900mm . Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = W 1500mm x L 3795mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet Over all Dimension of Table: W 1500mm x L 3795mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L=6 Nos Foot Space=500mm L = 08 Nos$
Providing and fixing Over Head Cabinet with glass shutter Interior & Exterior will be provided with powder-coated finish (50-70Microns). Material of Construction for Work Bench:20G thick GI Sheet. Over all Dimension of Table: 600mm H x 600mm L x 450mm D 1 Rack and 2 Shutter Cabinet: 600mm Lvii. 1 .VGeography Lab, Providing and fixing wall bench ,dimension {W 750mm x L 13200mm x H 900mm} Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = {W 750mm x L 13200mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet. Over all Dimension of Table: W 750mm x L 13200mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L= 07 Nos 2 Shutter Sink Cabinet : 600mm L= 01 Nos Foot Space=600mm L=14 Nos Electric Race way: 16/6 amp switch and socket Anchor Make or equivalent = 01 Pair or more as required = 21 Nos Sink of SS304/PP 450*550mm, Work mounted three way water tap with swan neck spout = 01 Eye Washer table top on corner unit=01 Nos Made up of PU or GI pipe  Providing and fixing Island bench ,dimension W 1500mm x L 3795mm x H 900mm . Granite Top: Granite with half round nosing, acid resistant, alkali-resistant = W 1500mm x L 3795mm, 18mm±2mm thick, black Interior & Exterior will be provided with powder-coated finish.(50-70Microns) Material of Construction for Work Bench:20G thick CRCA Sheet. Over all Dimension of Table: W 1500mm x L 3795mm x H 900mm 1 Drawer and 2 Shutter Cabinet: 600mm L=6 Nos Foot Space=500mm L = 08 NosVRF AC¬Providing and fixing 15" to 18" ht. stainless steel text & logo of college (as approved by college authority) with radium finish and including all taxes, etc. complete job.'
Providing and finishing wall with Tribal art work (as per approved) with weatherproof plastic emulsion paints for Sohrai, Kohbar, Saura, Paithkar, Jadupetiya, Kalighat and Madhubani artwork, Etc. as per approved deign and required including all materials and scaffolding, etc. all complete job."2 CD †Providing Artistic glass mosaic Murals (as per approved) , including designing, all materials, labours, scaffolding with all complete. & Design, Supply Installation, Testing & Commissioning of modular type Variable Variable Refrigerant Volume air cooled Outdoor units with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 49°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads. The unit should have refrigerant-cooled PCB for better life of system.Compressor motor should have more than 4 poles.The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation, auto address setting, auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc. ODU having 100% inverter OEM make advanced hermetically sealed type compressor including following details :- (Note - All design & drawing should be submitted for approval by Architect), approved Brand - (Hitachi/ Daikin/ Samsung/ Voltas) VOut Door Unit- Top Discharge (50HP -System 01 (26HP+24HP) with follwing specifications24HP -System 01 26HP System-02á
Model 24HP, cooling 1 (67.2.0kw),cooling 229152.0btu/h),cooling1 (40.0kw),Heating 1(45.0)153450.0btu/h) cooling 1 (10.68) Heating 1 (11.08) cooling 1 (16.8) Heating 1 (16.9)ERR(nominal cooling 3.75),External Static pressure (80pa), liquid pipe (12.60 mm), gas pipe (28.58mm), installtion max lanth (mm 220,110) transmission cable (0.75mm) Refrigerant type (R410A), Factory charing (7kg),Sound pressure (db(a)2) 63) net dimensions (WxHxD)(mm1,295*1,695*765) cooling (*C-5-53)Ó
Model 26HP, cooling 1 (72.8.0kw),cooling 248248.0btu/h),cooling 1 (18.86kw), cooling 1(35.5a) Heating 1 78.4Kw)267344.0btu/h) cooling 1A (30kw)Heating 17.19.5Kw ERR(nominal cooling 3.86),External Static pressure (80pa), liquid pipe (19.05mm), gas pipe (34.92mm), installtion max lanth (mm 220,110) transmission cable (0.75mm) Refrigerant type (R410A), Factory charing (12.5kg),Sound pressure (db(a)2) 66) net dimensions (WxHxD)(mm1,860*1,695*765) cooling (*C-5-53).VRF Indoor Unit, VRF HSP DUCTABLE unit, 5.0TR Y - JOINTCORDLESS REMOTEnVRF Outdoor Installation with Proper Vibration isolation , testing & commissioning of the system complete job.HP6VRF copper Piping of required length all complete job.ASuction Ling wiith closed cell nitrile rubber & necessary support@Liquid Ling wiith closed cell nitrile rubber & necessary support敒湦瑥樠楯瑮椠獮慴汬瑡潩扮畓灰祬湩Ⱨ琠獥楴杮琠獥楴杮愠摮挠浯業獳潩楮杮漠⁦䌲堠〠㜮‵煓浭䌠灯数⁲桳汩敤⁤潣浭湵捩瑡潩慣汢⁥M匀灵汰楹杮‬整瑳湩⁧整瑳湩⁧湡⁤潣浭獩楳湯湩⁧景倠䍖䐠慲湩倠灩湩⁧楷桴猠灵潰瑲椀⥩椀楩਩〴洠楤⹡ ㈀‵浭搠慩央畓灰祬湩Ⱨ琠獥楴杮琠獥楴杮愠摮挠浯業獳潩楮杮漠⁦㐲䜠畡敧䜠⁉畄瑣湩⁧楷桴爠煥極敲⁤畳灰牯晴牐癯摩湩⁧洹桴捩汣獯摥挠汥楮牴汩⁥畲扢牥琠敨浲污椠獮汵瑡潩楷桴爠煥極敲⁤摡敨楳敶挠浯汰瑥⁥潪⹢9䐀捵⁴捡潣獵楴⁣湩瑳污慬楴湯眠瑩⁨灯湥挠汥楮牴汩⁥畲扢牥䌀湡慶⁳潃湮捥楴湯2䔀瑸慲删晥楲敧慲瑮挠慨杲湩⁧楷桴瀠潲数⁲慶捣浵獩湩嵧畓灰祬湩Ⱨ琠獥楴杮琠獥楴杮愠摮挠浯業獳潩楮杮漠⁦畓灰祬☠删瑥牵愠物䜠楲汬䐯晩畦敳獲眠瑩⁨䍖ф㘴⸠㐀‷Ю㠴⸠㤀‷Ԯ〱‴Ԯ〱‵Ԯ〱‶Ԯ〱‷Ԯ〱‸Ԯ〱‹Ԯㄱ‱Ԯㄱ′Ԯㄱ″Ԯㄱ‴Ԯㄱ‵Ԯㄱ‶Ԯㄱ‷Ԯㄱ‸̮䤨Щ䤨⥉⠀䥉⥉⠀⥩ԡ倀湡汥⁳桳污敢猠汯灯煡敵琠灹⁥湩漠慰畱⁥湡⁤牴湡汳捵湥⁴汣慥⁲潣扭湩瑡潩楷桴猠硩氠祡牥⁳潴朠瑥爠煥極敲⁤畬⁸敬敶污湯⁧楷桴愠汬映硩湩⁧捡散獳牯敩⁳潴攠獮牵⁥敢瑳瀠牥潦浲湡散映牯眠湩⁤灵楬瑦‬楶牢瑡潩Ɱ漠汩挠湡楮杮愠摮瘠獩慵灡数牡湡散‮慐敮獬眠瑩⁨潭敲氠祡牥⁳楷汬戠⁥牰晥牥敲⁤潦⁲敢瑴牥椠獮汵瑡潩湡⁤浩牰癯摥猠慨楤杮挠敯晦捩敩瑮‮⁕慶畬⁥桳污潮⁴敢洠牯⁥桴湡㈠ㄮ圠瑡⽴㉭⁋獡瀠牥䔠⁎卉⁏〱㜷㈭㈺㄰‸湡⁤敲灳捥楴敶琠楨摲倭牡祴琠獥⁴散瑲晩捩瑡⁥桳污敢瀠潲畤散⁤敢潦敲瀠潲畣敲敭瑮‮慐敮獬洠獵⁴慳楴晳⁹慄瑲搠潲⁰浩慰瑣琠獥⁴獡瀠牥䤠⁓㐱㐴ⴳ㜹猠慨汬猠潨⁷潮猠杩景戠敲歡条⁥湯倠汯捹牡潢慮整猠敨瑥⁳桷捩⁨慨敶戠敥硥潰敳⁤潴唠⁖潦⁲⁡業⹮漠⁦〵‰潈牵⁳獡瀠牥䄠呓⁍⁇㔱⸵慐敮獬猠慨汬渠瑯栠癡⁥教汬睯敮獳䤠摮硥愠⁳数⁲十䵔䐠ㄠ㈹‵景ㄠ‵湵瑩⁳桷湥琠獥整⁤湯愠猠浡汰⁥硥潰敳⁤潴唠⁖潦⁲〵‰潈牵⁳獡瀠牥䄠呓⁍⁇㔱⸵倠湡汥猠慨汬戠⁥楷桴愠摤瑩潩慮湅⁤慣⽰汁浵湩浵唠䘯瀠潲楦敬 汇穡湩⁧慂⁲愨汬愠畬業楮浵猠慨汬戠⁥慦瑣牯⁹ 業汬映湩獩⥨映牯攠摮⁳獡爠煥極敲⹤倠湡汥猠慨汬戠⁥楦數⁤癯牥䴠⁓瑳畲瑣牵污猠整汥䴯⁓異汲湩⠠慰摩猠灥牡瑡汥⥹挠湯潦浲湩⁧潴琠敨搠瑥楡整档楮慣灳捥晩捩瑡潩獮愠⁳数⁲灡牰癯摥愠捲楨整瑣牵污搠慲楷杮⹳吠慲湩摥愠摮映捡潴祲愠瑵潨楲敺⁤慬潢牵眠瑩⁨畳数癲獩潩潴挠浯汰瑥⁥桴⁥湥楴敲瀠湡汥椠獮慴汬瑡潩獡瀠牥搠慲楷杮愠摮搠物捥楴湯漠⁦桴⁥湥楧敮牥湩⁧湩挠慨杲⹥⠠牤睡湩⁧畭瑳戠⁥灡牰癯摥Ⱙਊ_倀潲楶楤杮愠摮猠灵汰楹杮漠⁦牐獥畳敲䜠畡敧䄠獳浥汢⁥楷桴䜠瑡⽥慂汬嘠污敶椠据畬楤杮愠汬挠浯汰瑥⹥B倀潲楶楤杮䄠物爠汥慥敳嘠污敶⼠䐠慲湩嘠污敶†湩汣摵湩⁧污潣灭敬整꠮牐癯湩⁧慦牢捩瑡湩⁧湡⁤慭楫杮䴠⁓瑓畲瑣牵⁥畳灰牯⁴獡瀠牥爠煥極敲敭瑮⁳楷桴爠摥漠楸敤瀠楲敭⁲湡⁤′潣瑡⁳景猠湹桴瑥捩攠慮敭慰湩⹴映牯瀠灩湩⁧椠据畬楤杮愠汬挠浯汰瑥⹥̰䐀獥杩Ɱ猠灵汰楹杮‬湩瑳污楬杮‬整瑳湩⁧…潣浭獩楳湯湩⁧景䔠晦汵敵瑮吠敲瑡敭瑮倠慬瑮‮桔⁥晅畦畬湥⁴牔慥整敭瑮猠慨汬戠⁥慢敳⁤湯䴠䉂⁒整档潮潬祧‮桔⁥慮畴敲漠⁦晥汦敵瑮椠⁳潤敭瑳捩圠獡整眠瑡牥†牦浯眠獡⁨愠敲獡眠楨档猠慨汬戠⁥楤捳慨杲摥椠瑮桴⁥呅⹐倠慬瑮ਮ桔⁥捳灯⁥桳污湩汣摵⁥敤楳湧愠摮攠數畣楴湯漠⁦污汥捥牴捩污‬敭档湡捩污‬汰浵楢杮‬牰捯獥楳杮‬湡楣汬牡⁹煥極浰湥獴愠摮眠牯獫攠捴爠煥極敲⁤潴挠浯汰瑥⁥桴⁥慰正条⁥污湯⁧楷桴朠瑥楴杮愠灰潲慶牦浯琠敨猠慴整瀠汯畬楴湯挠湯牴汯戠慯摲‬瑯敨⁲瑳瑡瑵牯⁹潢楤獥愠⁳敷汬愠⁳牦浯琠敨搠獥杩潣獮汵慴瑮‮桔⁥捳灯⁥污潳椠据畬敤⁳桴⁥敤楳湧漠⁦汅捥牴敭档湡捩污†汥浥湥獴‮硅捥瑵潩景挠癩汩眠牯獫猠慨汬戠⁥湩琠敨猠潣数漠⁦桴⁥楃楶潣瑮慲瑣牯愠⁳数⁲桴⁥敤楳湧漠⁦桴⁥呅⁐敶摮牯‮敄楳湧琠慴敫挠湯楳敤慲楴湯愠⁳楧敶敢潬⹷⠠敄楳湧猠潨汵⁤敢愠灰潲敶⁤桴⁥牁档瑩捥獴Щ椨⥩⠀楩⥩⠀癩̩瘨Щ瘨⥩⠀楶⥩⠀楶楩Щ椨⥸㄀〱⸠(一乏ⴠ匠䡃䑅䱕䑅䤠䕔卍传䱎⁙‭䅐呒†‭䥉Р䤨⥖⠀⥖⠀䥖ԩ嘨䥉ة嘨䥉⥉⠀塉̩堨Щ堨⥉⠀䥘䥉ԩ堨䥉猩潎整㨠传数慲楴湯漠⁦異灭猠慨汬戠⁥慢敳⁤湯氠癥汥挠湯牴汯敬⁲牰灯獯摥琠敢椠獮慴汬摥椠慴歮愠⁳数⁲楳整氠捯瑡潩⹮猠ࠂ畓灰祬‬湩瑳污慬楴湯Ⱐ琠獥楴杮☠挠浯業獳潩楮杮漠⁦′敍慧楰數楆數⁤敌獮䌠浡牥⁡剉䐠浯⁥祔数›⼱⸲∸牐杯敲獳癩⁥捓湡䌠位ⱓㄠ㈹‰⃗〱〸愠⁴㔲灦ⱳ㈠㠮浭䘠硩摥氠湥ⱳ〠〮㠲䰠硵愠⁴ㅆ㈮‬䍉ⱒ传噎䙉‬畳灰牯⁴⹈㘲ⰵ䠠㈮㐶‬䩍䕐ⱇㄠ〲扤圠剄‬䐳䐠杩瑩污丠楯敳删摥捵楴湯‬桔敲⁥湩楤楶畤污祬挠湯楦畧慲汢⁥瑳敲浡‬㈱嘠䍄☠倠䕯‬剉爠湡敧›〴Ɑ匠灵潰瑲漠⵮潢牡⁤瑳牯条⁥灵琠㈱‸䉇⠠䑓挠牡⁤潮⁴湩汣摵摥Ⱙ䤠㙐ⰷ䤠ㅋⰰ䔠杤⁥湁慬祬楴獣‭楌敮挠潲獳湩⁧敤整瑣潩Ɱ䤠瑮畲楳湯搠瑥捥楴湯‬湉畢汩⁴畁楤潍楴湯搠瑥捥楴湯‬捓湥⁥档湡敧搠瑥捥楴湯‬楶敤慴灭牥湩Ⱨ唠ⱌ䌠ⱅ䘠䍃挠牥楴楦摥‮⠠灁牰癯摥䈠慲摮ⴠ䠠䍉噋卉佉ⱎ䐠ⵓ䌲㍄㈱䜱ⴰ啉⽆䔠畱癩污湥⥴ਠㄊఀ爀ࠂ㈀ऋSupplying and fixing of Auditorium Chair, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Seats Description- Push back chair or Fixed Back chair. Auto Tip-up cushion. Sliding mechanism – Proprietary item as per design. Design is subject to change for continual improvement. Without any disturbing noise. Arm-rest to Arm-rest (center dist.): 21’’to 24’’ (inches). PPCPinjection molded Housing for Cushion & Backrest. All sheet metal parts with powder coated / or zinc passivated. Seat numbering on cushion on tip-up portion as per BT design. Row numbering for seats along the aisles . Provision for lights on sides for seats along the aisles. Integral Skin Armrest/PPCP /Wooden. All exposed & visible parts shall be powder coated. Fabric:- Approved from our existing range of fabric. 3mm lamination on fabric. FR grade material confirms to IS 15061 For horizontal Burning test only. Frame:- Frame of ERW Round Tube / IS :3074 - 2005 . Cushion Frame - 19 dia 1.2mm thick, Back Rest - 16 dia 1.63 mm thick, S Spring Wire Dia – 2.9. Remark – dimension tolerance +2 mm. Polyurethane Foams:- Density: 45 + 5 Kg/M3 / JIS K 6401. Constant Compression Set: (Max. 13%) JIS K 6401. Remark – dimension tolerance + 10 mm. Spring:- For Auto Tip-up – Torsion Spring / Spring Steel IS : 4454 1981 GRADE 2 (part I). For Push Back mechanism – tension Spring / Spring Steel IS : 4454 1981 GRADE 2. Wing Components:- HRPO Sheet Metal / IS : 1079 - 1994 . Wing frame : Rectangular Style. ERW Square tube IS:4923-1985 25X25 1.63mm Thick. Side wing frame with With fabric upholstered plywood. Remark – dimension tolerance + 2 mm. Back & Cushion Housing:- Material: PPCP (Injection Molded). Back Rest - IS:10951-1984 PPCP BLACK 2.3mm thick. Cushion - IS:10951, PPCP BLACK 2mm thick. Remark – dimension tolerance + 2 mm. Arm-rest:- Integral skin PU with water Fall Edges /PPCP Injection Molded with Integral skin PU / Wooden. Slider Mechanism:- Sliding mechanism Will have travel of max 60mm forward. Roller and ball cage mechanism for sliding. Size – channel 33X210MM 2MM Thick. Proprietary item as per design. Design is subject to change for continual improvement of the mechanism. Remark – dimension tolerance + 2 mm. Seat Dimension:- Cushion Height – 440 +10. Back Rest Height – 1030 +10. After Push Back Dimension – 920 +10. Normal Dimension – 750 +10. Remark – dimension tolerance + 10 mm. Installation Hardware:- RCC Flooring 4 Inch - Anchor Fastener M8X100mmL. Sleve Dia 14mmWith 30mmL (2 Nos). Wooden Flooring 2 Inch - Coach Bolt for M8X40/50 (2 Nos). Special Note:- All part detail mention are subject to change for continual improvement of the seat. Seat will be tested as per our specification only. other test will be applicable to our seats in not mention of our specification.¹ 唀楮Ѵ慒整Ƥ䨀慨歲慨摮匠慴整䈠極摬湩⁧潃獮牴捵楴湯䌠牯潰慲楴湯䰠浩瑩摥⠊潇瑶‮景䨠慨歲慨摮唠摮牥慴楫杮਩潃灲牯瑡潩摉湥楴楦慣楴湯丠⹯唭㔴〲䨱㉈㄰匵䍇〰㌳㔲刊来⹤传晦捩㩥ⴠ䈠極摬湩⁧潃獮牴捵楴湯䐠灥牡浴湥ⱴ䜠癯⹴漠⁦桊牡桫湡Ɽ倠潲敪瑣䈠極摬湩Ⱨ倊伮‮‭桄牵慷‬慒据楨㠭㐳〰ⰴ䨠慨歲慨摮倊潨敮丠⹯ⴺ〠㔶ⴱ㐲㘴㔲⼷㐲㘴㔲⼸㐲㘴㔲ⰹ攠洭楡㩬樭扳捣橬慨歲慨摮杀慭汩挮浯嘊剅⁙䡓剏⁔䕔䵒䔠儭何䅔䥔乏䤠噎呉呁佉⁎低䥔䕃ਠ但⁒䕄䕔䵒义呁佉⁎䙏删呁╅慎敭漠⁦潃瑮慲瑣牯匯灵汰敩⽲杁湥祣敩嵳潃獮牴捵楴湯漠⁦敎⁷畂汩楤杮†景匠匮‮敍潭楲污䌠汯敬 576 EACH

34 . Ranchi under Ranchi University, Ranchi 3 EACH

SURVEILLANCE SYSTEM

Supply, installation , testing & commissioning of NVR 32 Channel: Connect Up to 32 IP Cameras, Up to 8 Megapixels Resolution, HDMI output with 4k output and VGA output with 2MP Output , Support H.265,H.264, MJPEG, Incoming Bandwidth 256 Mbps, 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD upto 6TB, 2 USB at least 1 × USB with 3.0, Serial interface:1 RS-485, 1 RS-232, Alarm I/O 16/4, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified, (Approved Brand - HICKVISION, DS-7732NI-k4/ Equivalent) 5 EACH

Supply, installation , testing & commissioning of 2 Megapixel Fixed Lens Camera IR Bullet Type: 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, inbuilt audio Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. (Approved Brand - HICKVISION, DS-2CD3021G0-IUF/ Equivalent) 56 EACH

49 . Supply, installation, testing and commissioning of outdoor 2MP, VF LENS , 2.8MM TO 12MM, resolution 1920*1080 fixed lens Color Indoor AV Camera, 1/3" CMOS, H.264/MJPEG High-profile, dual Stream support, True Day & Night (TDN) with , Wide Dynamic Range (WDR), Open Network Video Interface Forum (ONVIF) Profile S & G - TF card support (128 GB), IP66 & IK 10 Rating, Power Over Ethernet (POE), IR distance upto 30 Meter. 2 EACH

50 . Supply, installation , testing & commissioning of POE switch of 10/100/1000 Mbps on each Ethernet port. The switch shall be mounted on rack. The rate shall also include cost of power supply and providing end termination.

A) 24 port 10/100/1000 Mbps managed Giga Byte POE Switch, One Touch 1 EACH

B) 16 port 10/100/1000 Mbps managed Giga Byte POE Switch 8 EACH

C) HDMI Splitter” is a unit whereby you can send your HDMI output of set-top boxes, DVD Players, D-VHS Players, PC's and other HDTV devices. 1 EACH

51 . Supply, drawing and connecting of cat-6, UTP cable with 20m conduit with fixing accessories for cctv 6000 METRE

52 . Supply , Fixing of 6U Racks for POE switch installation in floor wise 8 EACH

53 . Supply , Fixing, Commissioining of 50 Inch Monitor for CCTV 0.0 EACH

54 . Supply , Fixing, Commissioining of HDMI cables for connecting monitor to NVR 0.0 EACH

55 . Supply , Fixing, Commissioining necessary accessories for cctv , nvr and monitors 1 LOT

AUDIO SUYSTEM (MINI AUDITORIUM)

56 . Supplying, Installing, Testing and Commissioning of 15” powered 2-way loudspeaker, Model QM 4 Specifications Max SPL *calculated 127 dBSPL Sensitivity *5-band average 99 dBSPL Frequency Response 60Hz – 20kHz Amplifier Power RMS: 380W Peak: 470W Transducers HF: 34mm Compression Driver LF: 15” High Power Woofer Directivity *H x V 85° x 75° Connections XLR+¼” In, XLR Out Dimensions *H x W x D 705 x 462 x 440mm Net Weight 21.5kg Shipping Weight 26kg Preferred Brands – Quest / Audio Focus / Mayer Sound / Bose. 2 EACH

57 . Supplying, Installing, Testing and Commissioning of Wall Mounted Weather Proof Speakers Max SPL *calculated 112 dB Sensitivity *5-band average 93 dB Frequency Response 75Hz – 20kHz±2dB Impedance 16Ω Transformer Taping 100V 20w/30w/40w/60w 70V 10w/15w/20w/30w Amplifier Power RMS 100W Peak 200W Transducers HF 25mm Titanium Dome Tweeter LF 8” High Performance Polypropylene Woofer Directivity *H x V 150° x 120° -10dB Connections Captive Screw Terminal Plug (In/Thru) Environmental Ingress Rating Speaker Cabinet IP56 (IP67 when used with IPMX1 kit) Dimensions *H x W x D 345 x 202 x 243mm Net Weight 4.3 kg Shipping Weight 6.0 kg Preferred Brands – Quest / Audio Focus / Mayer Sound / Bose. 8 EACH

58 . Supplying, Installing, Testing and Commissioning of Digital Amplifier, 4 channel @ 1500 watt per channel. Specifications Wake On Music, Auto-Mute (1ms wake-up), Limiting on High Temperature Amplifier Protection Systems Thermal protection, Over-Current Protection, DC Protection, HF Protection Mains Input Voltage Range 85VAC - 265VAC Standby Power Consumption 4.9W Muted Power Consumption 25W Idle Power Consumption 50W Standard Power Consumption (Pink Noise@ 1/8th Rated Power, 8Ohm) 500W Mains Connector powerCON Output Connector SpeakON per channel Dimensions (H x W x D) 88 x 482 x 416 mm (3.5 x 19 x 16.4") Weight 12.4kg (27.3 lbs) Accessories Mains Cable, Feet, User Manual, Euroblock Plugs Frequency Response 20-20kHz (+/-0.3dB) Peak Output Current 40A Dynamic Range 111dB (A-weighted) Noise Level -67dBu (A-weighted) Distortion (1kHz@1W/8Ohm) 0.004% Distortion (1kHz@50W/8Ohm) 0.003% Crosstalk (1kHz@1W/8Ohm) -90dB Gain 32dB Maximum Input Level +24dBu Input Type XLR Balanced Inputs and Euroblock Links (+ optional Expansion Module) Input Sensitivity +4dBu Input Impedance 10kOhm Output Resistance 13mOhm Front Controls Volume Adjust, 80Hz HPF Enable, 100Hz LPF Enable, Limiter Enable, Auto-Standby Enable) Indicators (LEDs) Blue/Orange Active/ Standby Orange Protection Green Signal Detection Orange/Red Limiter/Clip Cooling Fan cooled, temperature Dependent. Preferred Brands – Quest / Audio Focus / Mayer Sound / Bose. 1 EACH

59 . plying, Installing, Testing and Commissioning of 10 + 2 Channel Analog Mixer 16 mono channels 16 internal time-delay effects Neutrik mic XLR&Neutrik 1/4 inch jacks Channel insert Super wide gain ‘DuoPre’ mic line input 3 band EQ with MusiQ 2 pre-fade Aux sends; 1 post-fade Aux send; 1 internal FX send Illuminated mute Sound image pan Illuminated PFL & peak warning indicator ALPS 100mm faders 4 stereo channels with 2-band EQ and inputs for extra sources Stereo returns & playback All inputs with level control 12 bar meters Mono/stereo function on auxes 1&2 Monitor output section Alt stereo output source Configurable USB stereo audio in/out Preferred Brands – Allen & Heath / Audio craft / Equipson / Bose/ Mayersound/Audio Focus 1 EACH

60 . Supplying, Installing, Testing and Commissioning of Hand Held wired Economy Range Cardiode Microphones Dynamic microphone element Cardioid polar pattern Balanced, low impedance (600 ohms) Output level of -52dBV/Pa (2.5mV) Frequency response of 50 to 15,000 Hz On/off slide switch XLR male output connector Weight of 244 grams with dent-resistant ball grill. Preferred Brands – Shure / Equipson / Bose/Mayersound/ Audio Focus/Sennheizer 4 EACH

61 . Supplying, Installing, Testing and Commissioning of Hand Held Dynamic wired Microphones for Speaking and singing. Type Dynamic (moving coil) Frequency Response 70 to 15,000 Hz Polar Pattern Cardioid Output Impedance 600 Ω Sensitivity at 1 kHz, open circuit voltage -53.5 dBV/Pa¹ (2.10 mV) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Weight 300 g (10.58 oz.) Switch On/Off Switch Connector Three-pin professional audio (XLR), male 2 EACH

62 . Supplying, Installing, Testing and Commissioning of SHURE Combo Wireless UHF Microphone system, SVX288IN/PG-58 (consisting 2 nos. Hand Held wireless microphones working on a single receiver) • Available Frequencies: between 794 –806 MHz • Operating Range: LO power mode: 18 m (60 ft.)* HI power mode: 75 m (250 ft.)* * under typical conditions • Audio Frequency Response: 50 Hz – 15 kHz • Transmitter RF Output Power: LO power mode: 1 mW maximum HI power mode: 10 mW maximum • Audio Output Connector: XLR balanced and ¼" unbalanced • Maximum Output Level: -19 dBV (XLR), -5 dBV (1/4”) (R25 - Band for Thailand Regulation) (ref. +/-33kHz deviation with 1 kHz tone) • Battery Life: Up to 10 hours with 2 AA batteries • Dynamic Range: >90dB, A-weighted • System Distortion: 2 EACH

63 . Providing installing and commissioning of Cables, Mic. Stands, Speaker brackets, speaker cables, Interconnecting Cables, Microphone cables, storing and operating rack, clamps and other allied items as where required with all complete job.. 1 1 LOT

64 . Supplying, Installing, Testing and Commissioning of Manual Hand Pulling Curtain, curtain Mechanism Left to right with system, Horizontal sliding arrangement complete with track, brackets, sliding arrangement & manual operation complete with runner, master runner etc, size 32’ x 18’ (576 sq. ft approx.), (Costomised with branded 1/3 phase motor) 1 EACH

65 . Supplying, Installing, Testing and Commissioning of front frill with required accessories like cotton tape, cotton laces, Tussels with satin crush cloth of branded make shade and colour, including stitching 27’ x 3’, Approx. 1 EACH

66 . Supplying, Installing, Testing and Commissioning of Upper Sky – Black glazed cotton double gathered cloth curtain including arrangement of frill bar made of 32mm synthetic enamel paint finish MS pipe hanging steel wire rope 27’ x 3’, Approx. with all complete. 3 EACH

67 . Supplying, Installing, Testing and Commissioning of of Back wall covering (stage / dias), with alumunium panel with 6mm ply and cloth stitching 56’ x 17’6”, all Costomised as per requirement. 1 Complete Job.

68 . Proscenium: Providing, fitting & fixing side proscenium by made of MS Frame. The front fascia of the proscenium to be covered with 6mm BWP ply.Finally the front facia of the proscenium to be covered with 4mm thick natural teak venerred ply to be pasted on 6mm ply with adhesive in a decorative way.completed with melamine polish of approved colour. Entire work to be done as per specification and direction of E.I.C., size 19 ft 6 inch x 2ft 199.27 SQ.M

69 . Supplying, Installing, Testing and Commissioning of Side wings of size 19 ft x3 ft, made up of wooden frame, infilled by Ply Boards of 6mm, covered with enameled paint / cloth, rotable as per design and complete job. 4 EACH

70 . Supplying, Installing, Testing and Commissioning of Stage lighting system with latest type Par Can and PAR 64 lamp Lights (12 nos), Power pack 12kW per channel 2Kw 6 pack DMX (O1 no); LCD 0602 DMX Light Mixer with controller (01 no), Metal lights facing towards the front of the stage (O2 nos); DMX Controller, XLR jack to Jacks, soltwares for DMX controllers, Microphone cables, bits, 1.5 sqmm wires, flexcible pipes. 1.5 single core cable and DMX cable etc., Clamps for fixing Lights etc., Preferred Brand – GOBO / SATAN / GIA / STAN. 1 LOT (COMPLTE JOB)

AUDIO SYSTEM FOR MEETING ROOM

71 . DIGITAL WIRED CONFERENCE SYSTEM: (Chairman Discussion / Conference Unit) . Supplying, Installing, Testing and Commissioning of Digital Chairman Discussion /Conference Unit with Removable Microphone of minimum Length 400mm Chairman Discussion Unit with built-in Digital Signal ProcessingUnit with Priority and Next-in-Line Configuration Priority button silences all delegate microphones and allows only the chairperson to speak; Next-in-line button gives the floor to the next speaker in a waiting list of speakers who requested to speak. User Button with Feedback; Shielded microphone, immune to mobile phone interference, High-quality integrated loudspeaker; Headphone output with Volume Adjustment Loop-through, daisy-chain cabling; Unit with Bi color bar indicator Compatible Screw Lock Microphone of length 400mm Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button or better Audio Quality 16Bit digital; Frequency response: 25 Hz-15,000 Hz (± 3 dB) or better Microphone with 400 Gooseneck Length; Polar Pattern: Unidirectional, Cardioid Max SPL @ 1kHz: 110 dB SPL (1% THD+N) or better S/N Ratio: > 67 dB(A); sensitivity: (-40.5±2) dBV @ 1Pa, 1KHz or better Microphone with Ring Indicator to light up Red when active and Green when in Request Connection: Screw Lock Material: Brass; Certification: CE need to submit; 2M CAT5e cable from the same OEM Approved make : Televic / Bayerdynamic / Marcony Technology / Audix 1 EACH l.io

72 . Delegate Discussion / Conference Units. SITC of Digital Delegate Discussion / Conference Unit with Removable Microphone of minimum Length 400mm Delegate Discussion Unit with built-in Digital Signal Processing Unit with Microphone On / Off Button; User Button with Feedback Shielded microphone, immune to mobile phone interference High-quality integrated loudspeaker; Headphone output with Volume Adjustment Loop-through, daisy-chain cabling; Unit with Bi color bar indicator Compatible Screw Lock Microphone of lenght 400mm Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button Connectivity: 2 digital bus connections (IN/OUTinterchangeable), Headphone connection. Audio Quality 16Bit digital; Frequency Response: 25 Hz-15,000 Hz (± 3 dB) or better Microphone with 400 Gooseneck Length; Polar Pattern: Unidirectional, Cardioid Max SPL @ 1kHz: 110 dB SPL (1% THD+N) or better S/N Ratio: > 67 dB(A); sensitivity: (-40.5±2) dBV @ 1Pa, 1KHz or better Connection: Screw Lock Microphone with Ring Indicator to light up Red when active and Green when in Request Material: Brass; Certification: CE need to submit; 2M CAT5e cable from the same OEM Approved make : Televic / Bayerdynamic / Marcony Technology / Audix 19 EACH

73 . Controller Unit for Conference system Supplying, Installing, Testing and Commissioning of of Digital Central Conference Controller with Recording & Web Server, Conference Controller with built-in Digital Signal Processing Control upto minimum 50 Discussion Unit and expandable upto 150 Discussion Unit by configuring multiple Controller Unit,Controller unit with 4 Bus Connections (4 branches or 2 closed loops) for redundancy mechanism; 16 channel, Frequency response- 20Hz~20KHz, SNR - >85Db(A); Dynamic Rage > 80dB, THD - <0.05% , Audio Input – LINE IN X 2, Audio Output - LINE OUTPUT x 2; Output Load - >1kΩ; LAN interface - 1x RJ45; Recording – USB x 1; Amplifier Output - 2x25W/4Ω Control Port - RS232, RJ45; PTZ Camera Control – Shall support Control & Configure the Controller via the Integrated Web Server; Two USB Connections to connect USB Storage Device for Direct Recording of the Meeting. The Second USB Storage Device will take over automatically in-scenaro the First USB Storage get full; Camera Control Integration Capability, Controller with LCD display to implement several Conference Mode: Direct access, Request, Push to talk, FIFO, Vox control; Selectable Voice Activation, Volume control 0 dB to -46 dB + “OFF”; Digital Acoustic , Feedback ReductionWith Audio Input & Output for connectivity with external sysytem like amplifier, wireless microphone & audio/video conference system, Audio Quality 16Bit digital With Power Saving Mode allows controller to sleep state if it has been left ON, Connectivity: Balanced XLR input, 1 Unbalanced RCA input, 2 Unbalanced RCA outputs, 4 Bus connections (4 branches or 2 loops), LAN connection, 2 USB connections,1 Lockable Power connection.; Headphone Port; Certification: CE Approved make : Televic / Bayerdynamic / Marcony Technology / Audix 1 EACH

74 . Supplying, Installing, Testing and Commissioning of Conference connection cable, 10m, black and other interconnecting cables, jacks etc should be from The Same Brand and Interconnecting cables, Microphone cables, speaker cables, special Cat-5 cables for Conference system, PVC Conduit, Power Sockets etc. 1 LOT, COMPLETE JOB

75 . SITC of Two way passive loudspeaker including wall mount bracket Approved make : Quest / Mayor Sound / Martin Audio / Bose. 2 EACH

76 . Supplying, Installing, Testing and Commissioning of Digital Mixing amplifier - Suitable for above Speakers including all accessories and all complete as required and complete job. Approved make : Quest / Mayor Sound / Martin Audio / Bose. 1 EACH

LECTURE THEATRE EQUIPMENT

77 . Supplying, Installing, Testing and Commissioning of Digital Podium with in built Audio and Digital system Smart Rostrum has PC with i3 processor, 4GB RAM, 500 HDD, DOS and Keyboard/Mouse, and can be customized to as per the requirement. Smart Podium has sliding top tray to place Laptop which allows presenter to display any multimedia file instantly. It is fully compatible with all types of Projectors. It has switching plate with buttons on the top, which allows you to display desired projection output, We integrate high quality, echo-free and branded audio equipment in Smart podiums, All cables and connectors inside the podium are tagged and well managed to simplify the structure complexity. 18” gooseneck microphone from premium brands integrated with the Smart Podium. It has 2 XLR ports on the top. All the doors, drawers, trays and shelves are lockable to avoid unauthorised access. It has in-built anti-theft mechanism. Switcher helps to switch the projection among different devices, while splitter helps to split the display for multiple outputs. Smart podium should have all the required input/output ports such as USB, VGA in/out, HDMI in/out, LAN, Audio in/out, XLR, Power and so on. Podium allows you to connect smart board with the projector directly, and helps you to conduct interactive lectures. It integrates full HD Document Camera which helps to project live document/object for audience with greater clarity, Podium has 4 caster wheels which enable it to move easily and effortlessly. Controller helps to operate all the electric & electronic devices using its touch screen etc. Preferred Brand – VAC / INGRESS / ITC / LIBERTY EACH

78 . Supplying, Installing, Testing and Commissioning of Audio Power Amplifier: OPERATION MODES Stereo Mode Bridged-Mono Mode Load 8Ohm 4Ohm 8Ohm 4Ohm 70V (22Ohm) 100V (33Ohm) Maximum Continuous Power (@1khz, 1% Thd) 2 x 140W 2 x 140W 1 x 280W 1 x 260W 250W 240W Maximum Dynamic Power (@1khz, 1% Thd) 2 x 200W 2 x 275W 1 x 550W 1 x 550W 550W 550W Frequency Response 20-20kHz (+/-0.3dB) Peak Output Current 25A Dynamic Range 112dB (A-weighted) Noise Level -76dBu (A-weighted) Distortion (1kHz@1W/8Ohm) 0.003% Distortion (1kHz@50W/8Ohm) 0.011% (Stereo) 0.004% (Bridged-Mono) Crosstalk (1kHz@1W/8Ohm) -95dB Gain 26dB/32dB Maximum Input Level +24dBu Amplifier Version QX-300A QX-300D Input Type Analogue Balanced 3-pin Phoenix (5.08mm pitch) Dante RJ-45 (AES67 Compatible) with RJ-45 Link Input Sensitivity +7dBu/+4dBu -4.5dBFS/- 1.5dBFS Input Impedance 10kOhm - Maximum Input Level +24dBu 0dBFS Output Resistance 22.5mOhm/43.6mOhm Front Controls Volume Adjust, 80Hz HPF Enable, Bridged-Mono Enable, Limiter Enable, Auto-Standby Enable) Preferred Brand – QUEST / EQUIPSON (WORK) / CROWN / MAYERSOUND EACH

79 . Supplying, Installing, Testing and Commissioning of Wall Mounted Weather Proof Speakers Max SPL *calculated 112 dB Sensitivity *5-band average 93 dB Frequency Response 75Hz – 20kHz±2dB Impedance 16Ω Transformer Taping 100V 20w/30w/40w/60w 70V 10w/15w/20w/30w Amplifier Power RMS 100W Peak 200W Transducers HF 25mm Titanium Dome Tweeter LF 8” High Performance Polypropylene Woofer Directivity *H x V 150° x 120° -10dB Connections Captive Screw Terminal Plug (In/Thru) Environmental Ingress Rating Speaker Cabinet IP56 (IP67 when used with IPMX1 kit) Dimensions *H x W x D 345 x 202 x 243mm Net Weight 4.3 kg Shipping Weight 6.0 kg Preferred Brand – QUEST / EQUIPSON (WORK) / CROWN / MAYERSOUND EACH

80 . Supplying, Installing, Testing and Commissioning of 6 channel Audio Mixer. Digital Echo 20 – 400 m/s. Frequency 25 Hz – 25 KHz. MP3 Player with Bluetooth, Display & Remote available. Input Gain: –50 dB to 6 dB gain range with overdrive indication.. Output: 0 dBm / 17 dBm (775mv / 5.5v). Equalization: Bass & Treble ±5 dB. Controls: Gain, Eq., Pan, Echo, Fader. Power Supply: 220V 50Hz AC ± 10% (In separate enclosure) Dimension: 295 (W) x 165 (D) x 80 (H) mm. Weight: 1.630 kg (approx.) Preferred Brands – Shure / Equipson / Bose/ Mayersound/ STRANGER EACH

81 . Supplying, Installing, Testing and Commissioning of Wireless UHF Lapel / Collar Microphone system Specifications Audio Input Level: –20 dBV maximum * Input Impedance: 22 kΩ RF Output (dependent on applicable country regulations): HI power mode: 10 mW maximum * LO power mode: 1 mW maximum Weight: 270 g (10.2 oz.)(without batteries) * Housing: Molded ABS Power Requirements: 2 “AA” size alkaline or rechargeable batteries Preferred Brands – Shure / Equipson / Bose/ Mayersound/Audio Focus/ EACH

82 . Supplying, Installing, Testing and Commissioning of Green Chalk Board, Size 6 ft x 4 ft. Green ceramic board 1200mm x 1800mm - The writing surface shall be made of steel sheet of thickness 0.3 to 0.4 mm having vitreous enamel coating of 0.11 mm minimum thickness of top and 0.03mm minimum on the back with free from waviness and show no scratches on using HB to 3H pencils for writing. The surface of the writing board shall show excellent eraseabilty when specified writing medium is used. The core material should be 7mm thick MDF. Backing shall be of electro galvanised steel sheet. The board shall secured from all side with extruded aluminum alloy hollow section frame duly anodized and shall have front: 20mm, side: 16mm and wall thickness: 1.2mm. 4 nos. ABS corner grey color should be provide at all corners of the board. EACH

83 . Supplying, Installing, Testing and Commissioning of connection cable, interconnecting cables, jacks etc and Interconnecting cables, speaker cables, PVC Conduit, Power Sockets etc., suitable cabinet for storing and operating the full system and all complete job. LOT, COMPLETE JOB

2.04 1 LOT, COMPLETE JOB

1 LOT, COMPLETE JOB

1 LOT, COMPLETE JOB

1 LOT, COMPLETE JOB

1 LOT, COMPLETE JOB

1 LOT, COMPLETE JOB

2.19 1 COMPLETE SET

2.21 1 COMPLETE SET

2.23 1 COMPLETE SET

1 LOT, COMPLETE JOB

1 LOT, COMPLETE JOB

1 LOT, COMPLETE JOB

86 . 1 . 1 COMPLETE SET

87 . 2 . 2 COMPLETE SET

90 . 5 . 1 COMPLETE SET

91 . 1 COMPLETE SET

92 . 2 . 2 COMPLETE SET

95 . 1 COMPLETE SET

96 . 2 . 2 COMPLETE SET

99 . 1 COMPLETE SET

100 . 2 . 2 COMPLETE SET

103 . 1 COMPLETE SET

2 . 4 COMPLETE SET

2 . 4 COMPLETE SET

2 . 4 COMPLETE SET